|
Features
AEC-Q100 qualified
Compliance to eUSB2.0 and USB2.0
Compliance to eUSB2.0 physical layer
Compliance to the USB2.0 specification and all
relevant ECNs
Supports host-only repeater, device-only
repeater, and dual-role repeater operation
Supports all USB2.0 FS, LS and HS data rates
Supports RAP for a selected set of registers
Integrated, configurable pull-up and pull-down
resistors on both eUSB2.0 and USB2.0 ends
Signal Integrity (SI) settings
− For eUSB2.0: support Tx de-emphasis, Rx
equalization, Rx squelch threshold, Tx
output swing
− For USB2.0: support Rx squelch threshold,
Rx termination, Rx equalization, Tx
de-emphasis, Tx slew rate, Tx output swing
1.8 V I2C target interface supports standard
mode, fast mode and fast mode plus
Supports BC1.2 power provider CDP
configuration capability in host mode
Description
The DIA36600 is an automotive qualified 1-port
eUSB2.0 to USB2.0 repeater, designed for
automotive applications such as infotainment
systems, head units, and active cables. It ensures
seamless signal translation between the lower
voltage SoCs and legacy USB2.0 system interfaces
while supporting host-only, device-only, and dual-role
repeater modes. The device complies with USB2.0
standards, offering full-speed (12 Mbps), low-speed
(1.5 Mbps), and high-speed (480 Mbps) data rates.
The DIA36600 is compliant with the embedded
USB2.0 (eUSB2.0) Physical Layer Supplement to the
USB Revision 2.0 Specification, and supports
eUSB2.0 operations and protocol.
The DIA36600 offers extensive signal integrity
configurability, such as adjustable Tx de-emphasis
and Rx equalization, and supports BC1.2 power
provider CDP configuration in host mode. The
DIA36600 supports 1.8 V I2C interface, and the I2C
target address is selectable using the ADDR pin
connected to VDD1V8 with a resistor or connected to
GND directly.
The DIA36600 is available in green wettable-flank
QFN-12 package. The devices are specified over an
ambient temperature range from -40°C to 105°C,
which meets the requirements of automotive
applications.
Applications
Automotive infotainment and cluster
Automotive head unit
Active cable, cable extenders, and backplane
|