Features
 Broad Programmable Charging Current:
50~1000mA
 Over-Temperature Protection
 Under Voltage Lockout Protection
 Reverse current protection between BAT and
GND pins
 Programmable Charge Termination Current
 Maximum Voltage Power Input: 36V
 Automatic Recharge Threshold: 4.05V
 Final Float Voltage: 4.2V
 Charge Status Output Pin
 Trickle Charge Threshold: 2.5V
 Soft-Start Limits Inrush Current
 Over Voltage Lockout Protection
 Package: DFN3*3-10
Descriptions
The DIO58013A is a complete constant-current /
constant voltage linear charger for single cell
Lithium-Ion batteries. No external sense resistor is
needed, and no blocking diode is required due to
the internal MOSFET architecture. Thermal
feedback regulates the charge current to limit the
die temperature during high power operation or
high ambient temperature. The charge voltage is
fixed at 4.2V, the charge current and the terminal
current can be programmed externally with
resistors. The input voltage is up to 36V.
When the input supply (wall adapter or USB
supply) is removed, the DIO58013A automatically
enters a low current state, dropping the battery
drain current to less than 1.0μA.
The DIO58013A is available in package with
DFN3*3-10. Standard product is Pb-Free.
Applications
 Wireless phone
 MP3/MP4 Player
 Bluetooth device