FEATURES
❏ Simple and Compact Design
The VF-2300 Flow Sensor is assembled with a few pieces of
components. The sensor body and Shedder bar (vortex generator)
are molded as one component. This design approach has
reduced the cost as well as the size and weight of the flowmeter.
Sensor body is made of PPS (Polyphenylene sulfide) and is
designed to eliminate deposits.
❏ No Maintenance Cost
Since the VF-2300 has no moving parts, no maintenance is
needed.
❏ Low Pressure Loss
A combination of straight flow path and Shedder bar gives a lower
pressure loss. (27kPa at 200L/min)
❏ Various fittings are lined-up
In addition to Taper Pipe Threads (R), TS socket, Flange (JIS
10K), Taper Pipe Threads (Rc) are available.
❏ Display Model with Current and Alarm Output
3-digit LED display for flow rate, current output and alarm outputs
(2-point) are provided in compact design.
❏ CE Marking
The VF-2300 meets the EC directive for CE mark.