DESCRIPTION
The VN710SP is a monolithic device made using STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transients compatibility table). Active current limitation combined with thermal shutdown protect the device against overload. After a thermal shutdown event, device stays latched off and diagnostic stays at a low level until next falling edge of input signal. The device detects open load condition both in on state and off state.

■ CMOS COMPATIBLE INPUT
■ ON STATE OPEN LOAD DETECTION
■ OFF STATE OPENLOAD DETECTION
■ SHORTED LOAD PROTECTION
■ UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN
■ PROTECTION AGAINST LOSS OF GROUND
■ VERY LOW STAND-BY CURRENT WHEN ENABLE PIN IS LOW
■ REVERSE BATTERY PROTECTION (*)