| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Braemac Americas-Symmetry | 170012
| Digi International Inc | One (1) RFA-LTE-T118-M62D524: Antenna LTE Dipole, SMA, Cellular, White, 1.8dBi max gain,698- 960/1710-2170/2500-2700 MHz | | 1
 |
UZP-400/1200P-A24-J0H-C
| Nipron Co | 400W 24V power supply | | 0
|
UZP-400/1200P-A48-J0H-C
| Nipron Co | 400W 48V power supply | | 0
|
ASPI-3012S-220M-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
ATFC-0201-2N0B-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AMPLA4012S-R36MT
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AMPLA7012S-R10NT
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AOC2012VAJC-12.8000C
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AOC2012XAJC-25.0000C
| Abracon Corporation |
RoHS : Compliant | | 0
|
MAX1012.A.001
| Taoglas Antenna Solutions | 12-in-1 Permanent Mount Antenna 1*GNSS L1/L5, 8*5G/4G, 3*Wi-Fi With SMA/RP-SMA Connector And 300mm Staggered RG-174/TGC-1.5DS Cable Pigtails. | | 0
|
OZP-120-12-TB0
| Nipron Co | 200W 12V power supply | | 0
|
ASPI-3012S-1R2N-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
ASPI-F6060-120M-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
ATFC-0201-2N4B-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
AMEL20-12SMAZ
 | Aimtec |
RoHS : Compliant | | 0
|
DB Roberts | 0120120000VR
| Essentra Components | | | 0
 |
50M120125J012
| Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.25 | | 0
|
50M120125J012B
| Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.25 | | 0
|
74500-12012
| Avdel | BEARING | | 0
|
R4-20-12-501-20
| Southco | R4-20-12-501-20 | | 0
|
R4-10-12-601-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
74200-12012
| Avdel | AIR SUPPLY TUBE | | 0
|
R4-10-12-201-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
MA-01-221-01-20
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
R4-10-12-401-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
R4-10-12-301-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
R4-10-12-901-20
| Southco | | | 0
|
R4-10-12-101-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
MA-01-220-01-20
| Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | | 0
|
R4-10-12-501-20
| Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | | 0
|
ECCO | 3041012000
| ITT Interconnect Solutions | | | 1,336
|
100-0120-000
| ITT Interconnect Solutions | | | 994
|
10-824802-012
| Amphenol Industrial Operations | | | 727
|
031-0560-121
| ITT Interconnect Solutions | | | 197
|
CM111-03-0375-012
| ECCO Connectors | | | 116
|
10-820030-12S
| Amphenol Industrial Operations | | | 99
|
3300351012
| ITT Interconnect Solutions | | | 47
|
CM111-03-1000-012
| ECCO Connectors | | | 45
|
19070-0121
| Molex |
RoHS : Compliant | | 25
|
M39012/05-0503
| Amphenol RF | | | 12
|
CM111-02-0500-012
| ECCO Connectors | | | 5
|
CM111-03-0500-012
| ECCO Connectors | | | 5
|
CM111-01-0500-012
| ECCO Connectors | | | 5
|
130775-0124
| ITT Interconnect Solutions | | | 3
|
130774-0012-MS
| ITT Interconnect Solutions | | | 3
|
Flip Electronics | NLSX3012DR2G
 | onsemi | Stock
RoHS : Compliant | | 41,138
|
SS9012GTA
| onsemi | Stock, Ship Today
RoHS : Compliant | | 37,707
|
FDPC1012S
| onsemi | Stock
RoHS : Compliant | | 23,689
|
L170-5780701200000
| Lumileds | Stock, Ship Today
RoHS : Compliant | | 11,000
|
FODM3012-NF098
| onsemi | Stock, Ship Today
RoHS : Compliant | | 8,915
|
MOC3012TVM
| onsemi | Stock, Ship Today
RoHS : Compliant | | 7,000
|
FAN2012EMPX
| onsemi | Stock, Ship Today
RoHS : Compliant | | 6,000
|
MOC3012VM
| onsemi | Stock, Ship Today
RoHS : Compliant | | 5,000
|
NTSB20120CT-1G
 | onsemi | Stock, Ship Today
RoHS : Compliant | | 4,797
|
FFSH30120A-F155
| onsemi | Stock, Ship Today
RoHS : Compliant | | 2,700
|
NFAM2012L5B
| onsemi | Stock, Ship Today
RoHS : Compliant | | 1,091
|
FFSH50120A
| onsemi | Stock, Ship Today
RoHS : Compliant | | 720
|
PCFFS40120AF
| onsemi | Stock, Ship Today
RoHS : Compliant | | 692
|
NTSB40120CT-1G
| onsemi | Stock, Ship Today
RoHS : Compliant | | 380
|
LS1012ASE7EKB
| NXP Semiconductors | Stock
RoHS : Compliant | | 94
|
Maritex | RC2012F185CS
.jpg) | Samsung Electro-Mechanics | Chip Resistor; SMD; 0805; 1M8; 1%; 1/8W
RoHS : Compliant | 20,000 : $0.007
5,000 : $0.008
1,000 : $0.025
1 : $0.039
|
| 38,300
|
HL-PSC-2012S31YC
| Hongli Zhihui Group Co LTD | LED Indicator; SMD; 0805; yellow; 586-596nm; 160-220mcd/20mA; 1.8-2.4V; water clear; 140 degrees; 2.0x1.25x0.68mm | 4,000 : $0.03
1,000 : $0.033
100 : $0.035
1 : $0.037
|
| 10,780
|
MLP2012S2R2MT0S1
| TDK Corporation | SMD Inductors; MLP2012S2R2MT0S1; TDK; 2.2 �H; 2 MHz; 299 m?; 1.25 mm
RoHS : Compliant | | 10,677
|
ACM2012-201-2P-T001
| TDK Corporation | Common Mode Filters; ACM2012-201-2P-T001; TDK; 250 m?; 2 mm; 1.3 mm; 1.2 mm
RoHS : Compliant | 4,000 : $0.136
2,000 : $0.146
500 : $0.174
150 : $0.209
50 : $0.277
5 : $0.407
1 : $1.275
|
| 6,784
|
CBW201209U601
| Fenghua (HK) Electronics Ltd | Ferrite bead -CBW0805-201209; SMD; Z=600Ohm; Rdc=0.25R; Imax=1.5A | 4,000 : $0.013
2,000 : $0.019
500 : $0.024
1 : $0.027
|
| 5,254
|
JCB160808A-601-2
| Jantek Electronics Co. | Ferrite bead EMI-JCB0603 (160808) SMD; Z=600Ohm; Imax=2A | | 4,000
|
CBW201209U151
| Fenghua (HK) Electronics Ltd | Ferrite bead -CBW0805-201209; SMD; Z=150Ohm; Rdc=0.1R; Imax=2A | 4,000 : $0.006
2,000 : $0.007
500 : $0.008
1 : $0.009
|
| 4,000
|
MMZ2012R102ATD25
| TDK Corporation | Ferrite Beads; MMZ2012R102ATD25; TDK; 850 �m; 0805; 1 k?; 300 m?
RoHS : Compliant | 12,000 : $0.024
4,000 : $0.032
1 : $0.101
|
| 4,000
|
RM84-2012-35-1012
| RELPOL | Electromagnetic relay; contact rating current 8A; coil voltage 12VDC; 2 changeover contact (2P); 8A/30VDC; 8A/250VAC | 500 : $1.242
20 : $1.3
5 : $1.626
1 : $1.896
|
| 3,264
|
1206S4J0124T5E
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 120K; 5%; 1/4W
RoHS : Compliant | 100,000 : $0.002
50,000 : $0.002
15,000 : $0.002
5,000 : $0.003
1 : $0.005
|
| 350
|
C091 31F012 101 2
| Amphenol Tuchel | Plug C091D series, 12 pins, female, right-angle, field installable (screw), for wire 4-6mm2, solder, contact plating: silver plated, IP67 | | 39
|
R2N-2012-23-1012-WT
| RELPOL | Relay R2N-2012-23-1012-WT, 12A, coil voltage 12VDC, 2 changeover contact (2P), 12A/24VDC, 12A/250VAC | 100 : $5.932
30 : $7.032
5 : $7.251
1 : $7.47
|
| 21
|
R2N-2012-23-5012-WT
| RELPOL | Relay R2N-2012-23-5024-WT, 12A, coil voltage 24VAC, 2 changeover contact (2P), 12A/24VDC, 12A/250VAC | 100 : $6.039
10 : $6.737
1 : $7.2
|
| 5
|
PI84-012DC-M41G-MS-2012
| RELPOL | Interface relay; contact rating current 8A; coil voltage 12VDC; changeover contacts (2P); 8A/24 VDC; 8A/230VAC | 100 : $9.882
30 : $10.338
5 : $10.87
1 : $12.921
|
| 4
|
RM84-3012-35-1012
| RELPOL | Electromagnetic relay; contact rating current 8A; coil voltage 12VDC; 2 changeover contact (2P); coil power 400-480mW; 8A/24VDC; 8A/250 VAC | 100 : $1.55
20 : $1.715
5 : $2.214
1 : $2.433
|
| 3
|
Pasternack Enterprises US | M39012/25-0012
| Pasternack Enterprises | Key Specifications, Connector Series: N, Connector Gender: Male, Chain Option: Chain. N Male Open Circuit Connector Cap with 3.75 Inch Chain. Pasternack’s M39012/25-0012 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a N-type connector series and a male gender. Our N-type male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 3.75-inch long chain to prevent loss and misplacement. Our M39012/25-0012 dust cap has a length of 4.95 inches, a width of 0.78 inches, and a height of 0.78 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this N-type male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0012 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. | 1 : $37.69
25 : $35.81
50 : $33.92
100 : $32.41
|
| 845
|
PE3C0120-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle with Times Connectors Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0120-12, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax. | 1 : $83.49
25 : $79.32
50 : $75.14
100 : $71.8
|
| 254
|
PE3M0120-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-12 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax. | 1 : $415.99
25 : $395.19
50 : $374.39
|
| 48
|
PE3C9240-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SSMB Jack Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMB bulkhead cable connection on the other. Our SMA to SSMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C9240-12 can also be known as a SMA plug to SSMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMB female cable assembly PE3C9240-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SSMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9240-12 can also be used in the other direction and will be SSMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMB jack bulkhead cable 12 inch length using RG178 coax. | 1 : $226.99
25 : $215.64
50 : $204.29
100 : $195.21
|
| 35
|
PE3M0128-72
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 72 inches. Temperature Conditioned SMA Male to SMA Male Right Angle Low Loss Cable 72 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male to SMA male right angle low loss cable 72 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0128-72 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to SMA cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and right angle SMA connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly. PE3M0128-72 can also be known as a temperature conditioned low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day after it is purchased. SMA plug to SMA plug cable assembly PE3M0128-72 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to SMA right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0128-72 can be used in the other direction and will be right angle SMA male to SMA male cable assembly. Pasternack high reliability low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for same-day shipment worldwide. Variations of PE44826 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to SMA male right angle low loss cable 72 inch length using PE-P142LL coax. | 1 : $604.99
25 : $574.74
50 : $544.49
100 : $520.29
|
| 16
|
PE3M0124-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 TNC Male to TNC Male Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 TNC male to TNC male cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 TNC male to TNC male cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/26-0010 TNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/26-0010 TNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/26-0010 TNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/26-0010 TNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0124-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly PE3M0124-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/26-0010 TNC cable assembly is manufactured with M39012/26-0010 TNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/26-0010 TNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/26-0010 TNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/26-0010 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 TNC male to TNC male cable 12 inch length using M17/28-RG58 coax. | 1 : $408.99
25 : $388.54
50 : $368.09
|
| 7
|
PE3C100060-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to 2.92mm Male Low Loss Test Cable 12 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100060-12 low loss test 2.92mm male to 2.92mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100060-12 can also be known as a low loss test 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100060-12 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C100060-12 2.92mm plug to 2.92mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements. | 1 : $630.6
5 : $605.38
10 : $580.15
25 : $554.93
|
| 2
|
PE3W01240-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 0
|
PE3C5950-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 4.3-10 Female Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C5950-12, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C5950-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5950-12 can also be used in the other direction and will be 4.3-10 female to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. | 1 : $194.99
25 : $185.24
50 : $175.49
100 : $167.69
|
| 0
|
PE3C7820-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle 4.1/9.5 mini DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to male coax assembly, PE3C7820-12, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle 4.1/9.5 mini DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C7820-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7820-12 can also be used in the other direction and will be right angle 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax. | 1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47
|
| 0
|
PE3C8430-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to NEX10 Male Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to NEX10 male low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to NEX10 male low PIM cable 12 inch length using 1/4 inch superflexible coax, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and NEX10 cable connection on the other. Our low PIM 4.3-10 to NEX10 cable assemblies have a male gender on end 1 and male on end 2. PE3C8430-12 can also be known as a low PIM 4.3-10 plug to NEX10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to NEX10 plug cable assembly PE3C8430-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 male to NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8430-12 can also be used in the other direction and will be NEX10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to NEX10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to NEX10 male low PIM cable 12 inch length using 1/4 inch superflexible coax. | 1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91
|
| 0
|
PE3M0250-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Temperature Conditioned N Female Bulkhead to N Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P300LL Coax., Pasternack temperature conditioned N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0250-12 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability N type to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and type N connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly. PE3M0250-12 can also be known as a temperature conditioned low loss type N jack to type N jack cable assembly and will be shipped the same day after it is purchased. N type jack to type N jack cable assembly PE3M0250-12 is built with PE-P300LL which is a flexible coax. The Pasternack flexible N type cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N female to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions, Pasternack high reliability low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for same-day shipment worldwide. Variations of PE44807 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P300LL coax. | 1 : $952.99
25 : $905.34
50 : $857.69
100 : $819.57
|
| 0
|
PE3W01240-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Clamped SMA Male to SMA Male Low Loss Cable 36 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 36 inch length using PE-P195 coax. | 1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91
|
| 0
|
PE3W01277/HS2
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50. SMA Female to N Female Cable Using LMR-240 Coax with Double HeatShrink. PE3W01277/HS2 is a SMA female to type N female cable using LMR-240 coax. This Pasternack SMA female to N type female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm type N for connector 2. Our female SMA to female N type cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01277/HS2 SMA female to type N female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W01570-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 12 inches. MCX Plug Right Angle to BNC Female 4 Hole Flange Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly MCX plug right angle to BNC female 4 hole flange cable 12 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug right angle to BNC female 4 hole flange cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC 4 hole flange cable connection on the other. Our right angle MCX to BNC cable assemblies have a plug gender on end 1 and female on end 2. This MCX to BNC cable is a plug to female coax assembly, PE3W01570-12, can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. MCX male to BNC jack cable assembly PE3W01570-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2 GHz maximum frequency MCX right angle plug to BNC female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01570-12 can also be used in the other direction and will be BNC female 4 hole flange to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to BNC female 4 hole flange cable 12 inch length using RG316-DS coax. | 1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31
|
| 0
|
Teledyne HiRel | 5962-87631012A
 | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-87627012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-87759012A
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-87554012A
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
5962-87615012A
| Teledyne HiRel | AND GATE, QUAD 2-INPUT
RoHS : Not Compliant | | 0
|
5962-87697012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-88520012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET
RoHS : Not Compliant | | 0
|
5962-87555012A
| Teledyne HiRel | LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
5962-87698012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-87761012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-89767012A
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-87656012A
| Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-88703012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
5962-87630012A
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-89573012A
| Teledyne HiRel | SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
Win Source Electronics | UPZ2012E601-2R0TF
| Sunlord |
RoHS : Compliant | 25,000 : $0.012
18,800 : $0.0133
14,495 : $0.0138
10,565 : $0.0142
6,805 : $0.0147
2,795 : $0.0179
|
| 788,361
|
WPN252012HR47MT
| Sunlord | FIXED IND 470NH 3.45A 35MOHM SMD
RoHS : Compliant | 10,240 : $0.0293
7,650 : $0.0327
5,920 : $0.0338
4,300 : $0.0349
2,780 : $0.036
1,140 : $0.0439
|
| 453,852
|
39-01-2025
| Molex | Mini-Fit Jr. Receptacle Housing, Dual Row, 2 Circuits, UL 94V-0, Natural
RoHS : Compliant | 7,250 : $0.0414
5,415 : $0.0462
4,185 : $0.0478
3,040 : $0.0494
1,965 : $0.051
810 : $0.0621
|
| 266,596
|
ACM2012-201-2P-T002
| TDK Corporation | CMC 350MA 2LN 200 OHM SMD
RoHS : Compliant | 5,115 : $0.0587
3,820 : $0.0655
2,955 : $0.0677
2,145 : $0.07
1,390 : $0.0722
570 : $0.088
|
| 118,000
|
WPN252012H4R7MT
| Sunlord | FIXED IND 4.7UH 1.25A 260MOHM SM / 4.7 μH Shielded Drum Core, Wirewound Inductor 1.25 A 260mOhm Max 1008 (2520 Metric)
RoHS : Compliant | 14,290 : $0.021
10,685 : $0.0234
8,265 : $0.0242
6,000 : $0.025
3,880 : $0.0258
1,590 : $0.0315
|
| 76,000
|
TLV70012DCKR
 | Texas Instruments | IC REG LDO 1.2V 0.2A SC70-5
RoHS : Compliant | 2,365 : $0.1271
1,765 : $0.1418
1,365 : $0.1467
990 : $0.1516
640 : $0.1565
265 : $0.1907
|
| 54,870
|
SI1012CR-T1-GE3
| Vishay Huntington | Trans MOSFET N-CH 20V 0.63A 3-Pin SC-75A T/R / MOSFET N-CH 20V 0.63A SC-75A | 2,285 : $0.1315
1,830 : $0.1368
1,410 : $0.1422
985 : $0.1529
635 : $0.1582
300 : $0.1689
|
| 36,529
|
IPT012N08N5ATMA1
 | Infineon Technologies AG | MOSFET N-CH 80V 300A 8HSOF
RoHS : Compliant | 204 : $1.4773
152 : $1.6478
118 : $1.7046
86 : $1.7614
55 : $1.8182
23 : $2.216
|
| 35,790
|
MASWSS0129TR-3000
| MACOM | DPDT LEAD FREE SWITCH DC - 6GHZ
RoHS : Compliant | 360 : $0.8387
290 : $0.8728
225 : $0.9069
155 : $0.975
100 : $1.0091
50 : $1.0773
|
| 22,500
|
19-237/R6GHBHC-C01/2T
| Everlight Electronics Co Ltd |
RoHS : Compliant | 4,350 : $0.069
3,485 : $0.0718
2,685 : $0.0746
1,875 : $0.0802
1,205 : $0.083
565 : $0.0886
|
| 17,668
|
10132798-012100LF
| Amphenol FCi | CONN RCPT 10POS SMD GOLD
RoHS : Compliant | 305 : $0.9924
230 : $1.1069
175 : $1.1451
130 : $1.1833
85 : $1.2214
35 : $1.4886
|
| 6,000
|
MLP2012S2R2TT0S1
| TDK Corporation | FIXED IND 2.2UH 600MA 429 MOHM
RoHS : Compliant | 3,050 : $0.0985
2,275 : $0.1099
1,760 : $0.1137
1,280 : $0.1175
825 : $0.1213
340 : $0.1478
|
| 4,000
|
25MU104MZ22012
| Rubycon Corporation | CAP FILM 0.1UF 20% 25VDC 0805
RoHS : Compliant | 260 : $1.173
195 : $1.3083
150 : $1.3534
110 : $1.3985
70 : $1.4437
30 : $1.7594
|
| 3,000
|
01220083Z
| Littelfuse Inc | FUSE CLIP CARTRIDGE 250V 30A PCB / Fuse Blocks and Clips - For 3AG Fuses
RoHS : Compliant | 965 : $0.3124
720 : $0.3484
555 : $0.3604
405 : $0.3724
265 : $0.3845
110 : $0.4686
|
| 2,000
|
PVX012A0X3-SRZ
| ABB Embedded Power | DC DC CONVERTER 0.6-5.5V 66W | 11 : $29.5455
8 : $32.9546
6 : $34.091
5 : $35.2273
3 : $36.3637
2 : $44.3182
|
| 1,200
|
Wuhan P&S | VS-E5PH6012L-N3
| Vishay Intertechnologies | Hyperfast Rectifier, 60A,1200V
RoHS : Compliant | 1 : $7.72
100 : $2.58
500 : $2.38
1,000 : $2.32
|
| 89,000
|
TNPW02012K49BEED
| Vishay Intertechnologies | High Stability Thin Film Flat Chip Resistors��2.49 k�� ��0.1% 0.075W
RoHS : Compliant | 1 : $0.52
100 : $0.18
500 : $0.16
1,000 : $0.16
|
| 60,000
|
MFU0603FF01250P500
| Vishay Intertechnologies | Thin Film Chip Fuses
RoHS : Compliant | 1 : $0.66
100 : $0.22
500 : $0.21
1,000 : $0.2
|
| 55,000
|
VS-E5PH3012L-N3
| Vishay Intertechnologies | Hyperfast Rectifier, 30A FRED Pt G5
RoHS : Compliant | 1 : $5.65
100 : $1.89
500 : $1.75
1,000 : $1.7
|
| 31,825
|
10122655-101LF
| Amphenol FCi | 10Row,120P,2mm,Right Angle Receptacle
RoHS : Compliant | 1 : $17.27
100 : $16.69
500 : $16.3
1,000 : $16.01
|
| 31,320
|
NLV14012BDR2G
 | onsemi |
RoHS : Compliant | 1 : $0.46
100 : $0.3
500 : $0.24
1,000 : $0.23
|
| 17,500
|
10127850-001LF
| Amphenol FCi | Headers & Wire Housings,IDC Terminal,SMT
RoHS : Compliant | 1 : $0.23
100 : $0.22
500 : $0.21
1,000 : $0.21
|
| 15,000
|
NTH4L012N065M3S
| onsemi | SIC MOS TO247-4L 12MOHM 6
RoHS : Compliant | 1 : $28.59
100 : $18.25
500 : $15.05
1,000 : $13.84
|
| 10,350
|
STBR6012W
| STMicroelectronics | -
RoHS : Compliant | 1 : $15.4
100 : $5.14
500 : $4.75
1,000 : $4.62
|
| 20
|
10124620-4444P00LF
| Amphenol FCi | AirMax Power Connectors, Power Solutions, 2-Pair, 2 Column, 12-Position, Right Angle Receptacle, Press-Fit
RoHS : Compliant | 1 : $5.65
100 : $2.26
500 : $2.09
1,000 : $2.04
|
| 20
|
NOIX1SE012KBLFB-GEVB
| onsemi | - | 1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36
|
| 1
|
NOIX1SN012KBLFB-GEVB
| onsemi | - | 1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36
|
| 1
|
.jpg)
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British