 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
021KFD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3W02152/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Female to TNC Male Right Angle Low Loss Cable Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly TNC female to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to TNC cable is a female to male coax assembly, PE3W02152/HS, can also be known as a low loss TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE3W02152/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC female to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02152/HS can also be used in the other direction and will be right angle TNC male to TNC female cable assembly if the opposite connectivity is required. Low loss TNC jack to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female to TNC male right angle low loss cable using LMR-240-UF coax with heatshrink. | 3,955 | ||
| PE3W02140/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using RG188 Coax with HeatShrink. PE3W02140/HS is a SMA male to BNC female bulkhead cable using RG188 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02140/HS SMA male to BNC female bulkhead cable assembly is constructed with RG188 coax. | 3,790 | |||
| PE3C10402-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss right angle a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10402-12 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10402-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10402-12 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 64 | ||
| PEWCA1021 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Coax Connector Series: 2.92mm, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 22 GHz, Maximum Frequency: 33 GHz, Maximum VSWR: 1.25:1. WR-34 UG-1530/U Square Cover Flange to 2.92mm Female Waveguide to Coax Adapter Operating from 22 GHz to 33 GHz. PEWCA1021 WR-34 waveguide to coax adapter is also known as a WR-34 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR34 to 2.92mm connector and has a female gender. Our WR-34 to 2.92mm female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-34 to 2.92mm waveguide to coaxial cable transition / adapter has a minimum frequency of 22 GHz and a maximum frequency of 33 GHz. WR 34 waveguide to 2.92mm transition adapter to coax PEWCA1021 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-34 waveguide adapter transition with 2.92mm interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 54 | ||
| PE3FCA502-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA502-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA502-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA502-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 43 | ||
| PE3C8502-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8502-100CM, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-100CM can also be used in the other direction and will be N type female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE38502-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. UMCX Plug to MCX Plug Right Angle Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle UMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38502-12, can also be known as a right angle UMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38502-12 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38502-12 can also be used in the other direction and will be right angle MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax. |
| 21 | ||
| PE8021 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 8 GHz, Design Type: High Power, Peak Power: 100 Watt, Leakage (CW): 16 dBm, Recovery Time : 20 ns. High Power Limiter, SMA, 100W Peak Power, 20 ns Recovery, 16 dBm Flat Leakage, 2 GHz to 8 GHz., Pasternack ships all of our products, including the PE8021 high power broadband signal limiter same-day, internationally. This SMA series limiter has a maximum peak power of 100W at 1us pulse, 0.1% Duty Cycle and Pasternack aims to keep our product inventory consistently stocked. The 100W limiter has SMA male to SMA type connectors with a dense but rugged, thin-film construction. Pasternack’s PE8021 high power high-power limiter features an impressive typical insertion loss of 1.2 dB. The PE8021 SMA to SMA limiter has a typical recovery time of 20 nanoseconds. Pasternack’s PE8021 100W limiter has a 1.2 dB typical insertion loss, and a minimum operational temperature range of -55 degrees C to a maximum of 90°C. PE8021 is a RF high power 100W at 1us pulse, 0.1% Duty Cycle limiter intended for use in space systems, VSAT, SATCOM, radar, and microwave radio applications. Our high-quality SMA to SMA limiters that we ship around the world, have a broadband frequency of 2 GHz – 8 GHz. Download the high power 100W PE8021 PDF datasheet with specifications and CAD drawing with dimensions for detailed technical information. Our PE8021 has an average input power of 1 and a military-grade design. In fact, this 8 GHz 100W high-rel limiter meets the US Department of Defense environmental test methods for humidity of and vibration of 20G, 100 to 2000Hz. Get in touch with Pasternack’s expert technical support for assistance with the high power 100W PE8021 broadband limiter. Founded in 1972, Pasternack has continued to meet the needs of its customers providing 2 (GHz) – 8 (GHz) high power limiters as well as a plethora of other electronic components. Pasternack’s knowledgeable sales team simplifies the checkout process and certifies that your 2 GHz – 8 GHz 1 average input power high-reliability broadband limiter will be exact to spec. PE8021 has a max leakage of 16 dBm and is part of our vast inventory of electronic products. This SMA male to SMA limiter is ready for purchase and ships anywhere in the world. Order your high power 100W limiter online today—there is no minimum order quantity and we provide same day shipping. |
| 3 | ||
| PE3M0021-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.9701 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 101.5 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0021-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/56-3109 SMA plug cable assembly PE3M0021-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0021-100CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 N type jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 101.5 cm length using M17/60-RG142 coax. |
| 0 | ||
| PE3W02131 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600-DB Coax. PE3W02131 is a N male to N male cable using LMR-600-DB coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02131 N male to N male cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02168 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to SMB Plug Right Angle Cable Using RG316-DS Coax. PE3W02168 is a reverse polarity TNC female bulkhead to SMB plug right angle cable using RG316-DS coax. This Pasternack reverse polarity TNC female bulkhead to SMB plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMB for connector 2. TNC to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC bulkhead to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02168 TNC reverse polarity female bulkhead to SMB plug right angle cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE302-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Cable 12 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male cable 12 inch length using PE-P141 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 12 inch length using PE-P141 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE302-12, can also be known as a N type plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE302-12 is built with PE-P141 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using PE-P141 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C10021/SP | Pasternack Enterprises | 0 | ||||
| PE3C10102-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Male Right Angle Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male right angle cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male right angle cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and right angle a type N cable connection on the other. Our a 2.92mm to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10102-18 can also be known as a 2.92mm plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10102-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10102-18 can also be used in the other direction and will be right angle type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02134 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMB Jack Cable Using RG188 Coax. PE3W02134 is a SMA female bulkhead to SMB jack cable using RG188 coax. This Pasternack SMA female bulkhead to SMB jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our female SMA bulkhead to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02134 SMA female bulkhead to SMB jack cable assembly is constructed with RG188 coax. | 0 | |||
 TE Connectivity | RN102-0.3-02-12M | TE Connectivity | RN102-0.3-02-12M Operating Voltage (Max): 300 VDC Current Rating (Max): .3 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .3 A PCB Terminal PD2 | Part Number: RN102-0.3-02-12M | Internal Number: 816484-SF | TE Connectivity RoHS : Compliant |
| 13,390 | |
| RN114-1-02-15M | TE Connectivity | RN114-1-02-15M Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN114-1-02-15M | Internal Number: 816502-SF | TE Connectivity RoHS : Compliant |
| 4,915 | ||
| RN242-6-02-1M8 | TE Connectivity | RN242-6-02-1M8 Operating Voltage (Max): 300 VDC Current Rating (Max): 6 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 6 A PCB Terminal PD2 | Part Number: RN242-6-02-1M8 | Internal Number: 816580-SF | TE Connectivity RoHS : Compliant |
| 1,689 | ||
| 284802-1 | TE Connectivity | 6POS MQS REC COD A Nominal Voltage Architecture: 12 V Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Mating Tab Width: .64 mm Mqs 0.63Mm Unsealed Connector System | 12 V 6 Housing for Female Terminals Wire-to-Board | Part Number: 284802-1 | Internal Number: 284802-1 | .64 mm | TE Connectivity RoHS : Compliant |
| 903 | ||
| 350210RFT | TE Connectivity | 3502 10R 1% Resistance Value: 10 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 10 Ω Thick Metal Film Power Resistor 1 % | Part Number: 350210RFT | Internal Number: 2-2176397-5 | TE Connectivity RoHS : Compliant |
| 786 | ||
| CONSMA021.062-G | TE Connectivity | SMA Jack 50 Ohm .062 PCB Edge Mount RF Interface: SMA RF Connector Style: Jack Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 27 GHz SMA Jack 50 Ω Threaded | Coax Connector | Part Number: CONSMA021.062-G | Internal Number: L9000280-01 | TE Connectivity RoHS : Compliant |
| 752 | ||
| RN202-1.5-02-1M6 | TE Connectivity | RN202-1.5-02-1M6 Operating Voltage (Max): 300 VDC Current Rating (Max): 1.5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1.5 A PCB Terminal PD2 | Part Number: RN202-1.5-02-1M6 | Internal Number: 816539-SF | TE Connectivity RoHS : Compliant |
| 615 | ||
| 5102156-6 | TE Connectivity | A/L UNIV HDR 26P VERT Connector System: Wire-to-Board Number of Positions: 26 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 26 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5102156-6 | Internal Number: 5102156-6 | TE Connectivity RoHS : Compliant |
| 354 | ||
| RN216-1-02-10M | TE Connectivity | RN216-1-02-10M Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN216-1-02-10M | Internal Number: 815714-SF | TE Connectivity RoHS : Compliant |
| 345 | ||
| DT04-4P-P021 | TE Connectivity | REC, 4P, GRY, BUSBAR, NICKEL Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Male Terminals Connector System: Bus Bar-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Integrated Component | 24 V | Part Number: DT04-4P-P021 | Internal Number: DT04-4P-P021 | 1.59 mm | TE Connectivity RoHS : Compliant |
| 314 | ||
| RN204-1.5-02-1M6 | TE Connectivity | RN204-1.5-02-1M6 Operating Voltage (Max): 300 VDC Current Rating (Max): 1.5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1.5 A PCB Terminal PD2 | Part Number: RN204-1.5-02-1M6 | Internal Number: 815787-SF | TE Connectivity RoHS : Compliant |
| 232 | ||
| RN232-1-02-18M | TE Connectivity | RN232-1-02-18M Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN232-1-02-18M | Internal Number: 816572-SF | TE Connectivity RoHS : Compliant |
| 54 | ||
| CTJ-3A-10-4021 | TE Connectivity | RAIL ASSY Terminal Junction System Component Type: Black Annodized Rail Assembly Operating Temperature Range: -85 – 347 °F Operating Temperature Range: -85 – 347 °C Black Annodized Rail Assembly -85 – 347 °F | Terminal Junction Module | Part Number: CTJ-3A-10-4021 | Internal Number: CTJ-3A-10-4021 | TE Connectivity RoHS : Compliant |
| 33 | ||
| 1-2186502-1 | TE Connectivity | T3224-PRINTER Printer Media Type: Roll - Single Sided Print Head Resolution: 24 dpmm Print Head Resolution: 600 dpi Roll - Single Sided 24 dpmm 600 dpi | Thermal Label Printer | Part Number: 1-2186502-1 | Internal Number: 1-2186502-1 | TE Connectivity RoHS : Compliant |
| 6 | ||
| 1-5102155-0 | TE Connectivity | A/L UNIV HDR 50P VERT Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5102155-0 | Internal Number: 1-5102155-0 | TE Connectivity RoHS : Compliant |
| 5 | ||
 Teledyne HiRel | M38510/21002BJA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| M38510/21002BLA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/21002B3A | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/21002BKA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | TFCR0402-16W-C-4021CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;4.02K;�0.25% RoHS : Compliant | 0 | ||
| UPTF0402-16W-N-1021DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.02K;�0.5% RoHS : Compliant | 0 | |||
| CR0402-16W-1021FT | VENKEL LTD | Chip Resistor;0402;1/16W;1.02K;�1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1021AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.02K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-4021CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;4.02K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-4021CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;4.02K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-4021DT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;4.02K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-4021BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;4.02K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1021CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.02K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1021BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.02K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1021DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.02K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-4021BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;4.02K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1021BT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.02K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1021AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.02K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-4021FT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;4.02K;�1% RoHS : Compliant | 0 | |||
 Win Source Electronics | B32021A3472K000 | TDK Electronics | CAP FILM 4700PF 10% 1.5KVDC RAD RoHS : Compliant |
| 500,000 | |
| B32021A3472M189 | TDK Electronics | CAP FILM 4700PF 20% 1.5KVDC RAD RoHS : Compliant |
| 36,948 | ||
| MOC3021SR2M/CT3021S | Fairchild Semiconductor Corporation |
| 33,140 | |||
LM94021BIMG/NOPB | Texas Instruments | SENSOR TEMP ANLG VOLT SC-70-5 RoHS : Compliant |
| 17,970 | ||
MCP2021-500E/SN | Microchip Technology Inc | IC LIN TXRX ON-BOARD VREG 8SOIC RoHS : Compliant |
| 13,997 | ||
ADC084S021CIMM | Texas Instruments | IC ADC 8BIT 4CH 200KSPS 10-MSOP RoHS : Not Compliant |
| 12,050 | ||
ADC101S021CIMFX | Texas Instruments | IC ADC 10BIT SAR SOT23-6 RoHS : Not Compliant |
| 10,380 | ||
| 61400416021 | Wurth Elektronik | CONN RCPT USB2.0 TYPEA 4POS R/A RoHS : Compliant |
| 10,320 | ||
| RP1202-15GU5 | Richtek Technology Corp |
| 7,000 | |||
| R7S721021VCFP#AA1 | Renesas Electronics Corporation | RZ/A1L Series 3 MB RAM 400 MHz Surface Mount 32-Bit Microcontroller - QFP-208 RoHS : Compliant |
| 5,090 | ||
| ECN30210P | Hitachi Ltd |
| 3,800 | |||
| 61302021121 | Wurth Elektronik | CONN HEADER VERT 20POS 2.54MM RoHS : Compliant |
| 3,775 | ||
CY7C1021B-15ZC | Cypress Semiconductor | IC SRAM 1MBIT 15NS 44TSOP RoHS : Not Compliant |
| 1,218 | ||
| LTM8021EV#PBF(LTM8021V) | Linear Technology | IC DC/DC UMODULE 500MA 35-LGA |
| 1,110 | ||
| CY7C1021D-10ZSXIT | Cypress Semiconductor | IC SRAM 1MBIT 10NS 44TSOP RoHS : Compliant |
| 310 | ||
 Wuhan P&S | CRCW04021M60JNED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 500,000 | |
| TNPW04021K87BEED | Vishay Intertechnologies | High Stability Thin Film Flat Chip Resistors��1.87 k�� ��0.1% 0.13W RoHS : Compliant |
| 40,000 | ||
| CRCW0402150RFKEDHP | Vishay Intertechnologies | CRCW0402-HP 100 150R 1% ET7 E3 RoHS : Compliant |
| 30,000 | ||
| CRCW04021K50FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 10,000 | ||
| CRCW0402120RFKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 10,000 | ||
| CRCW0402133KFKEDC | Vishay Intertechnologies | Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors��133 k�� ��1% 0.063W RoHS : Compliant |
| 10,000 | ||
| CRCW040210R5FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors, RoHS : Compliant |
| 10,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British