Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  



022A4-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

GLYN GmbH & Co. KG
CM9V-T1A-202267-MC03

Micro Crystal AG CM9V-T1A 32.768 KHZ 9PF -20/+ 20 ppm TA-QC -40 t
3,000
SU60-2230C-P

Qnity Laird 60 Series, Summit Module w/u.FL, PCIE/UART
70
453-00222-K1

Qnity Laird Development Kit, Module, Veda SL917, 8MB Flash, So
7
1701200220

Advantech Co Ltd F Cable 2*10P-2.0/D-SUB 9P(M)*2 22CM
4

Pasternack Enterprises US
PE3W02292-48

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to TNC Male Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to TNC male low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W02292-48 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02292-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W02292-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02292-48 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31
1,617
PE3W02284

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. Mini SMP Female to Mini SMP Female Right Angle Cable Using PE-047SR Coax., Radio frequency assembly mini SMP female to mini SMP female right angle cable using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to mini SMP female right angle cable using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to mini SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and right angle mini SMP cable connection on the other. Our mini SMP to right angle mini SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W02284 can also be known as a mini SMP jack to right angle mini SMP jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to mini SMP jack cable assembly PE3W02284 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid Mini SMP cable assembly is manufactured with mini SMP to right angle mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency mini SMP female to mini SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02284 can also be used in the other direction and will be right angle mini SMP female to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to mini SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to mini SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to mini SMP female right angle cable using PE-047SR coax.
1,570
PE3W02219/HS-24

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to N Male Cable 24 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly TNC male right angle to N male cable 24 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to N male cable 24 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle TNC cable connection on one end and a type N cable connection on the other. Our right angle TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W02219/HS-24 can also be known as a right angle TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02219/HS-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W02219/HS-24 is built with RG142 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02219/HS-24 can also be used in the other direction and will be a type N male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements.
1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
298
PE3M0228

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. Temperature Conditioned SMA Male to TNC Male Right Angle Low Loss Cable Using PE-P300LL Coax., Pasternack temperature conditioned SMA male to TNC male right angle low loss cable using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0228 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to TNC cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and right angle TNC connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly. PE3M0228 can also be known as a temperature conditioned low loss SMA plug to right angle TNC plug cable assembly and will be shipped the same day after it is purchased. SMA plug to TNC plug cable assembly PE3M0228 is built with PE-P300LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to TNC right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0228 can be used in the other direction and will be right angle TNC male to SMA male cable assembly. Pasternack high reliability low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for same-day shipment worldwide. Variations of PE45042 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to TNC male right angle low loss cable using PE-P300LL coax.
90
PE7602-20

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7602-20 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $40.89
25 : $39.25
50 : $38.03
100 : $37.21
12
PE71S9022

Pasternack Enterprises Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 80 Watts, Maximum VSWR: 1.9:1, Maximum Insertion Loss: 1.1 dB, Minimum Isolation: 50 dB. SPDT Electromechanical Relay Latching Switch, Terminated, DC to 50 GHz, Up to 80W, 28V, 2M Lifecycles, Solder Terminal, 2.4mm. The PE71S9022 electromechanical RF relay switch from Pasternack is available in a single pole double throw switch design with a latching actuator. This RF relay SPDT switch in a 2.4mm female connector has a maximum frequency of 50 GHz. Our 2.4mm SPDT electromechanical relay switch is rated for an input power handling of 80 Watts maximum (CW) at 50 GHz and make before break. The maximum switching speed of this radio frequency SPDT electromechanical switch is 10 ms. We offer a 50-ohm impedance coax connectorized SPDT terminated electromechanical relay RF switch. Our 2.4mm female electromechanical relay switch features a splashproof design. This electromechanical relay SPDT RF switch has a make before break action. Pasternack’s PE71S9022 2.4mm relay switch comes with a maximum VSWR of 1.9:1 and a maximum insertion loss of 1.1 dB. This electromechanical RF relay switch is available in 1.92-inch length, 0.56-inch height and 2.19-inch width. The RF relay switch with a solder pin control connector type has a typical operating voltage of 28 Volts. This SPDT switch is suitable for aerospace & defense, test & measurement, microwave radio systems, military commercial communication systems, research & development, SATCOM, wireless communications, enterprise and IoT applications. Our PE71S9022 2.4mm RF switch has a typical actuating set current of 160 mA. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 70 deg C. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. The SPDT electromechanical relay radio frequency latching switch PE71S9022 is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. Our 2.4mm RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.
1 : $8,150.0
10 : $7,824.0
25 : $7,498.0
100 : $7,172.0
1
PE3C11022

Pasternack Enterprises
0
PE3W00022LF

Pasternack Enterprises Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 10-32 Male Cable Using LMR-100 Coax, LF Solder. PE3W00022LF is a 1.0/2.3 jack bulkhead to 10-32 male cable using LMR-100A coax. This Pasternack 1.0/2.3 jack bulkhead to 10-32 male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10-32 for connector 2. Our jack 1.0/2.3 bulkhead to male 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00022LF 1.0/2.3 jack bulkhead to 10-32 male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W02239

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50. BNC Female Bulkhead to BNC Female Bulkhead Cable Using RG141 Coax. PE3W02239 is a BNC female bulkhead to BNC female bulkhead cable using RG141 coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02239 BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG141 coax.
0
PE3W10221

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using RG214 Coax. PE3W10221 is a N female bulkhead to TNC male cable using RG214 coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10221 N female bulkhead to TNC male cable assembly is constructed with RG214 coax.
0
PE3W20022

Pasternack Enterprises Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Jack Bulkhead Cable Using RG223 Coax. PE3W20022 is a SHV plug to SHV jack bulkhead cable using RG223 coax. This Pasternack SHV plug to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our plug SHV to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20022 SHV plug to SHV jack bulkhead cable assembly is constructed with RG223 coax.
0
PE3W20220/HS

Pasternack Enterprises Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to SMA Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W20220/HS is a FAKRA jack to SMA male right angle cable using LMR-100A coax. This Pasternack FAKRA jack to SMA male right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. FAKRA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20220/HS FAKRA jack to SMA male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W01022

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using Tinned RG405 Coax. PE3W01022 is a SMA male to SMA male right angle cable using RG405 Tinned coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01022 SMA male to SMA male right angle cable assembly is constructed with RG405 Tinned coax.
0
PE3W02201

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMB Plug Right Angle Cable Using PE-C100-LSZH Coax. PE3W02201 is a SMB plug right angle to SMB plug right angle cable using PE-C100-LSZH coax. This Pasternack SMB plug right angle to SMB plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02201 SMB plug right angle to SMB plug right angle cable assembly is constructed with PE-C100-LSZH coax.
0
PE3W02254LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W02254LF/HS is a TNC male to TNC male cable using RG58 coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02254LF/HS TNC male to TNC male cable assembly is constructed with RG58 coax.
0

Teledyne HiRel
5962-89547022A

Teledyne HiRel AND GATE, QUAD 2-INPUT, WITH TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-87644022A

Teledyne HiRel LATCH, D-TYPE, 8-BIT, TRANSPARENT, W/NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INP
RoHS : Not Compliant
0
5962-87629022A

Teledyne HiRel BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-88640022A

Teledyne HiRel BINARY COUNTER, 4-BIT SYNCHRONOUS PRESETTABLE, TTL-COMPATIBLE
RoHS : Not Compliant
0
5962-87630022A

Teledyne HiRel BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-88657022A

Teledyne HiRel BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-89513022A

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-88543022A

Teledyne HiRel IDENTITY COMPARATOR, 8-BIT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-89793022A

Teledyne HiRel IDENTITY COMPARATOR, 8-BIT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-87628022A

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant
0
5962-87627022A

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-88639022A

Teledyne HiRel LATCH, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-86847022A

Teledyne HiRel MULTIVIBRATOR, DUAL MONOSTABLE REGRIGGERABLE
RoHS : Not Compliant
0
5962-89766022A

Teledyne HiRel BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0

Venkel Ltd.
C0402X7R250-222JNP

VENKEL LTD Chip Capacitor;0402;X7R;25V;2200pF;�5%
RoHS : Compliant
10,000
C1206X7R500-223JNP

VENKEL LTD Chip Capacitor;1206;X7R;50V;0.022uF;�5%
RoHS : Compliant
4,000
C0201HQN100-220GNP

VENKEL LTD High-Q NP0 Capacitor;0201;HQN;10V;22pF;�2%
RoHS : Compliant
0
C0402C0G250-221FNP

VENKEL LTD Chip Capacitor;0402;C0G;25V;220pF;�1%
RoHS : Compliant
0
C0603X7R160-223JNP

VENKEL LTD Chip Capacitor;0603;X7R;16V;0.022uF;�5%
RoHS : Compliant
0
C1812X7R202-272KNE

VENKEL LTD HV Chip Capacitor;1812;X7R;2000V;2700pF;�10%
RoHS : Compliant
0
C1812X7R250-226MNU

VENKEL LTD Chip Capacitor;1812;X7R;25V;22uF;�20%
RoHS : Compliant
0
C0805X7R500-220KNP

VENKEL LTD Chip Capacitor;0805;X7R;50V;22pF;�10%
RoHS : Compliant
0
C1206C0G102-270JNE

VENKEL LTD HV Chip Capacitor;1206;C0G;1000V;27pF;�5%
RoHS : Compliant
0
C1206C0G500-222FNP

VENKEL LTD Chip Capacitor;1206;C0G;50V;2200pF;�1%
RoHS : Compliant
0
C1206C0G500-222GNE

VENKEL LTD Chip Capacitor;1206;C0G;50V;2200pF;�2%
RoHS : Compliant
0
C1206X7R500-223KNE

VENKEL LTD Chip Capacitor;1206;X7R;50V;0.022uF;�10%
RoHS : Compliant
0
C1210X7R250-226MNE

VENKEL LTD Chip Capacitor;1210;X7R;25V;22uF;�20%
RoHS : Compliant
0
SSPI676740-220NU

VENKEL LTD Square Shielded Power Inductor;676740;22uH;�30%
RoHS : Not Compliant
0
SMPI505040-220NU

VENKEL LTD Square Miniature Power Inductor;505040;22uH;�30%
RoHS : Compliant
0

Vyrian
83022022A

Texas Instruments Binary Counter, ALS Series, Synchronous, Positive Edge Triggered, 4-Bit, Up Direction, TTL, CQCC20
RoHS : Not Compliant
9,435
83022022X

Texas Instruments Binary Counter, ALS Series, Synchronous, Positive Edge Triggered, 4-Bit, Up Direction, TTL, CQCC20
4,862
XCVM1302-2DSEVFVB1369

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
4,097
XCVM1302-2DSEVFVB1024

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
3,559
XCVM1302-2DLEVFVF1369

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
3,513
XCVM1302-2DLEVFVB1369

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
2,912
XCVM1302-2DLEVFVB1024

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
2,883
XCVM1302-2DLEVSVD1760

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
2,722
XCVM1302-2DLIVFVA1760

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
2,591
XCVM1302-2DLIVFVB1369

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,844
XCVM1302-2DLIVFVB1024

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,769
XCVM1302-2DLIVSVD1760

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,721
XCVM1302-2DSEVFVA1760

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,704
XCVM1302-2DLEVFVA1760

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,328
XCVM1302-2DLIVFVF1369

AMD Xilinx Microprocessor Circuit
RoHS : Compliant
1,320

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com