Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  



0240ACNRWNTHCWC Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

ECCO
237-3024-000

ITT Interconnect Solutions
5 : $9.56
612
351-1024-000

ITT Interconnect Solutions
1 : $4.202
1
3511024000

ITT Interconnect Solutions
1 : $4.202
1

Flip Electronics
NSR0240MXT5G

onsemi Stock, Ship Today
RoHS : Compliant
1 : $0.03
152,000
NSR0240P2T5G

onsemi Stock, Ship Today
RoHS : Compliant
128,000
NSR0240MXWT5G

onsemi Stock, Ship Today
1 : $0.02
24,000
FDBL0240N100

onsemi Stock, Ship Today
RoHS : Compliant
20,000
L150-3090502400000

Lumileds Stock, Ship Today
RoHS : Compliant
1 : $0.23
14,000
L150-4090502400000

Lumileds Stock, Ship Today
RoHS : Compliant
1 : $0.29
9,000
L150-35705024000H0

Lumileds Stock, Ship Today
RoHS : Compliant
1 : $0.33
2,000
S98GL0BGT00HC0240

Infineon Technologies AG Stock, Ship Today
1 : $86.66
316

Pasternack Enterprises US
PE7602-40

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7602-40 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $50.79
25 : $48.76
50 : $47.23
100 : $46.22
2
PE7202-40

Pasternack Enterprises Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7202-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7202-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7202-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $1,180.0
5 : $1,132.8
10 : $1,085.6
1
PE3W02406LF

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using RG141 Coax, RoHS. PE3W02406LF is a N male to N male cable using RG141 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02406LF N male to N male cable assembly is constructed with RG141 coax.
0
PE3W02406

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using RG141 Coax. PE3W02406 is a N male to N male cable using RG141 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02406 N male to N male cable assembly is constructed with RG141 coax.
0
PE3W02405

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Jack to 75 Ohm SMB Jack Cable Using 75 Ohm RG179 Coax. PE3W02405 is a SMB jack to SMB jack cable using RG179 coax. This Pasternack SMB jack to SMB jack cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm SMB for connector 2. Our jack SMB to jack SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W02405 SMB jack to SMB jack cable assembly is constructed with RG179 coax.
0
PE3W02401

Pasternack Enterprises Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to N Female Cable Using PE-SR402FL Coax. PE3W02401 is a 3.5mm male to N female cable using PE-SR402FL coax. This Pasternack 3.5mm male to N female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm N for connector 2. Our male 3.5mm to female N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02401 3.5mm male to N female cable assembly is constructed with PE-SR402FL coax.
0
PE3W02409LF

Pasternack Enterprises Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. MCX Plug to SMA Male Cable Using PE-SR405FL Coax, LF Solder. PE3W02409LF is a MCX plug to SMA male cable using PE-SR405FL coax. This Pasternack MCX plug to SMA male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MCX to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02409LF MCX plug to SMA male cable assembly is constructed with PE-SR405FL coax.
0
PE3W02405LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Jack to 75 Ohm SMB Jack Cable Using 75 Ohm RG179 Coax with HeatShrink, LF Solder. PE3W02405LF/HS is a SMB jack to SMB jack cable using RG179 coax. This Pasternack SMB jack to SMB jack cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm SMB for connector 2. Our jack SMB to jack SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W02405LF/HS SMB jack to SMB jack cable assembly is constructed with RG179 coax.
0
PE3W02406LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE3W02406LF/HS is a N male to N male cable using RG141 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02406LF/HS N male to N male cable assembly is constructed with RG141 coax.
0
PE3W02409

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using PE-SR405FL Coax. PE3W02409 is a SMA male to MCX plug cable using PE-SR405FL coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02409 SMA male to MCX plug cable assembly is constructed with PE-SR405FL coax.
0
PE3C0240

Pasternack Enterprises
0
PE3W02402LF

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to NMO Mount Sexless Cable Using LMR-195 Coax, RoHS. PE3W02402LF is a TNC male right angle to NMO Mount sexless cable using LMR-195 coax. This Pasternack TNC male right angle to NMO Mount sexless cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm NMO Mount for connector 2. TNC right angle to NMO Mount coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to sexless NMO Mount cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02402LF TNC male right angle to NMO Mount sexless cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W02403LF

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to NMO Mount Sexless Cable Using LMR-195 Coax, RoHS. PE3W02403LF is a TNC male right angle to NMO Mount sexless cable using LMR-195 coax. This Pasternack TNC male right angle to NMO Mount sexless cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm NMO Mount for connector 2. TNC right angle to NMO Mount coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to sexless NMO Mount cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02403LF TNC male right angle to NMO Mount sexless cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W17720-240

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. N Male Right Angle to N Female Low Loss Cable 240 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N male right angle to N female low loss cable 240 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female low loss cable 240 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17720-240 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17720-240 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W17720-240 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17720-240 can also be used in the other direction and will be a type N female to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
1 : $346.99
10 : $333.11
25 : $319.23
100 : $305.35
0
PE3W02400

Pasternack Enterprises Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to N Male Cable Using PE-SR402FL Coax. PE3W02400 is a 3.5mm male to N male cable using PE-SR402FL coax. This Pasternack 3.5mm male to N male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm N for connector 2. Our male 3.5mm to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02400 3.5mm male to N male cable assembly is constructed with PE-SR402FL coax.
0

Teledyne HiRel
7902402KA

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME
0
79024023A

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME
0
7702401DA

Teledyne HiRel AND GATE, QUAD 2-INPUT
RoHS : Not Compliant
0
7702401CA

Teledyne HiRel AND GATE, QUAD 2-INPUT
0
7902402LA

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME
0
7902402JA

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME
0
7902401JA

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 90 NS ACCESS TIME
0
7902402XA

Teledyne HiRel PROM, POWER-SWITCHED, 1K X 8, 75 NS ACCESS TIME
0

Vyrian
VR68000002403JAC00

Vishay Intertechnologies Fixed Resistor, Metal Glaze/thick Film, 1W, 240000ohm, 10000V, 5% +/-Tol, 200ppm/Cel, Through Hole Mount
RoHS : Compliant
15,782
UR024-010

Tripp Lite Cable Assembly
10,253
TPS60240DGKRG4

Texas Instruments Switched Capacitor Regulator, 0.012A, 220kHz Switching Freq-Max, PDSO8
RoHS : Compliant
9,611
TPS60240DGKTG4

Texas Instruments Switched Capacitor Regulator, 0.012A, 220kHz Switching Freq-Max, PDSO8
RoHS : Compliant
8,961
TPS630240EVM-553

Texas Instruments
7,540
WPMDH1302401JT-NOPB

Texas Instruments
7,272
TMS9902-40NL

Texas Instruments Micro Peripheral IC, MOS, PDIP18
RoHS : Not Compliant
7,262
TMS9902-40JDL

Texas Instruments Micro Peripheral IC, MOS, CDIP18
RoHS : Not Compliant
7,135
WPMDH1102401JT-NOPB

Texas Instruments
6,019
TPS60240DGKT

Texas Instruments Switched Capacitor Regulator, 0.012A, 220kHz Switching Freq-Max, PDSO8
RoHS : Compliant
5,375
TMS9902-40JL

Texas Instruments Micro Peripheral IC, MOS, CDIP18
RoHS : Not Compliant
4,856
TPS60240DGK

Texas Instruments Switched Capacitor Regulator, 0.012A, 220kHz Switching Freq-Max, PDSO8
4,678
UR024-006-RA

Tripp Lite Cable Assembly
423
Y1630240R000B9W

Vishay Precision Group Inc Fixed Resistor, Metal Foil, 0.25W, 240ohm, 79V, 0.1% +/-Tol, 0.2ppm/Cel, 1206
RoHS : Compliant
336
UR024-006

Tripp Lite Cable Assembly
311

Waytek, Inc.
50240

Hillsdale Terminal & Tool Inc Vinyl Ring Terminal 12-10 Gauge 1/4" Stud
50 : $0.1773
200 : $0.1608
500 : $0.1437
1,000 : $0.1303
5,000 : $0.1242
17,448
02400104P

Littelfuse Inc The Littelfuse 02400104P is a compact, blade-style MINI diode fuse designed to provide reliable circuit protection and voltage control in 12V and 24V vehicle systems. Engineered to fit standard MINI fuse holders, this 1-amp diode offers efficient current direction control and helps protect sensitive electronic components from reverse voltage and transient spikes.
RoHS : Compliant
1 : $2.6704
50 : $2.3336
100 : $2.1892
200 : $2.0529
500 : $1.9648
12,228
50240N

Hillsdale Terminal & Tool Inc Nylon Ring Terminal 12-10 Gauge 1/4" Stud
50 : $0.1825
200 : $0.1655
500 : $0.1481
1,000 : $0.1342
5,000 : $0.128
11,809
10240

Hillsdale Terminal & Tool Inc Uninsulated Ring Terminal 12-10 Gauge, 1/4" Stud
50 : $0.1605
200 : $0.1455
500 : $0.1302
1,000 : $0.118
5,000 : $0.1125
8,116
19221-0240

Molex 1/0GA Tinned Eyelet 5/16" Stud
RoHS : Compliant
10 : $1.375
50 : $1.2265
100 : $1.1115
200 : $1.0732
500 : $1.0396
1,000 : $1.0013
671

Win Source Electronics
CC79R-2024-01-L

Samtec Inc CONN SOCKET 20-24AWG CRIMP GOLD / Socket Contact Gold 20-24 AWG Crimp Stamped
RoHS : Compliant
1,985 : $0.1513
1,485 : $0.1687
1,150 : $0.1746
835 : $0.1804
540 : $0.1862
225 : $0.2269
600,000
NSVR0240HT1G

onsemi DIODE SCHOTTKY 40V 250MA SOD323
RoHS : Compliant
625 : $0.5387
500 : $0.5606
385 : $0.5824
270 : $0.6262
175 : $0.6481
85 : $0.6919
360,000
NSVR0240V2T

onsemi Schottky Diode 40V 200mA SOD-523
760 : $0.397
565 : $0.4428
440 : $0.4581
320 : $0.4733
205 : $0.4886
85 : $0.5955
300,000
NSR0240V2T1G

onsemi DIODE SCHOTTKY 40V 250MA SOD523
RoHS : Compliant
360 : $0.8387
290 : $0.8728
225 : $0.9069
155 : $0.975
100 : $1.0091
50 : $1.0773
180,000
NSR0240V2T5G

onsemi DIODE SCHOTTKY 40V 250MA SOD523
RoHS : Compliant
305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773
171,080
SBR0240LP-7

Diodes Incorporated DIODE SBR 40V 250MA 2DFN
RoHS : Compliant
152 : $1.9848
113 : $2.2138
88 : $2.2901
64 : $2.3665
41 : $2.4428
17 : $2.9771
119,900
245861024004829+

Kyocera Electronic Components & Devices RECPT - 0.35MM PITCH - 24 POS 0.
2,440 : $0.1232
1,820 : $0.1374
1,410 : $0.1422
1,025 : $0.1469
660 : $0.1516
275 : $0.1848
100,000
CC79L-2024-01-L

Samtec Inc CONN SOCKET 20-24AWG CRIMP GOLD / Socket Contact Gold 20-24 AWG Crimp Stamped
RoHS : Compliant
1,490 : $0.2015
1,115 : $0.2247
865 : $0.2325
625 : $0.2402
405 : $0.248
170 : $0.3022
50,000
NSR0240HT1G

onsemi DIODE SCHOTTKY 40V 250MA SOD323
RoHS : Compliant
6,360 : $0.0472
4,755 : $0.0526
3,680 : $0.0544
2,665 : $0.0563
1,725 : $0.0581
710 : $0.0708
30,000
34.51.7.024.0010

FINDER SpA RELAY GEN PURPOSE SPDT 6A 24V / General Purpose Relay SPDT (1 Form C) 24VDC Coil Through Hole
RoHS : Compliant
56 : $5.3588
42 : $5.9771
33 : $6.1833
24 : $6.3894
16 : $6.5955
7 : $8.0382
25,590
CRCW040240K2FKED

Vishay Huntington RES SMD 40.2K OHM 1% 1/16W 0402
125,000 : $0.0024
96,155 : $0.0026
74,075 : $0.0027
53,575 : $0.0028
34,485 : $0.0029
14,290 : $0.0035
13,620
SBR0240LPWQ-7B

Diodes Incorporated Schottky Diodes & Rectifiers SBR Diode X1-DFN1006-2/SWP T&R 10K
RoHS : Compliant
11 : $29.3234
8 : $32.7068
6 : $33.8346
5 : $34.9625
3 : $36.0903
2 : $43.985
5,000
AZ4024-01H.R7G

Amazing Microelectronic Corp
RoHS : Compliant
440 : $0.6894
330 : $0.769
255 : $0.7955
185 : $0.822
120 : $0.8485
50 : $1.0341
2,196
CC10-2405SF-E

TDK-Lambda Corporation DC DC CONVERTER 5V 10W / Isolated Module DC DC Converter 1 Output 5V 2A 18V - 36V Input
RoHS : Compliant
9 : $33.7405
7 : $37.6336
6 : $38.9313
4 : $40.2291
3 : $41.5268
1 : $50.6107
844
CC10-2405SR-E

TDK-Lambda Corporation DC DC CONVERTER 5V 10W
RoHS : Compliant
4 : $116.7834
3 : $130.2582
2 : $134.7501
1 : $139.2418
155

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com