0266RLK-R Price, Distributor, Stock

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

02662-71000

Avdel

AVDELOK COL 516 FU ST

47-80-266-10

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

02662-70800

Avdel

AVDELOK COL 14 FU ST

47-80-266-50

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

78030-02661

Avdel

SUPPORT BLOCK O-RING

47-10-266-50

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

47-10-266-51

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

EBV Elektronik

DSC1121DI1-026.6000

Microchip Technology Inc

MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000)
RoHS : Compliant

DSC1121DI1-026.6000T

Microchip Technology Inc

MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000T)
RoHS : Compliant

Flip Electronics

R5F10266ASP#35

Renesas Electronics Corporation

Stock
RoHS : Compliant

908

Master Electronics

BA2-B0-26-610-12A-D

Carling Technologies

BA2B02661012AD
RoHS : Compliant

250 : $41.78
100 : $42.33
50 : $54.05
30 : $54.19
10 : $59.04
5 : $60.86
1 : $68.2

BA2-B0-26-620-51A-C3

Carling Technologies

Two-pole hydraulic-magnetic circuit breaker with handle actuator AC long delay 20A current rating and UL/CSA agency approvals.
RoHS : Compliant

250 : $51.34
100 : $53.4
50 : $68.18
30 : $68.35
10 : $74.47
5 : $76.76
1 : $86.02

BA2-B0-26-625-211-D

Carling Technologies

Two-pole hydraulic-magnetic circuit breaker with handle actuator AC long delay 25A current rating and screw terminals for OEM applications.
RoHS : Compliant

250 : $44.67
100 : $45.26
50 : $57.79
30 : $57.94
10 : $63.13
5 : $65.07
1 : $72.92

BB2-B0-26-610-12B-C3

Carling Technologies

BB2B02661012BC3
RoHS : Compliant

250 : $49.8
100 : $50.47
50 : $64.44
30 : $64.6
10 : $70.38
5 : $72.55
1 : $81.31

BB2-B0-26-615-112-D

Carling Technologies

Hydraulic-magnetic circuit breaker with handle actuator 2-pole configuration AC long delay 15A current rating and push-on 0.250 tab terminals.
RoHS : Compliant

250 : $41.78
100 : $42.33
50 : $54.05
30 : $54.19
10 : $59.04
5 : $60.86
1 : $68.2

BB2-B0-26-620-511-C

Carling Technologies

Hydraulic-magnetic circuit breaker with 2-pole configuration handle actuator and 20A current rating for OEM and general-purpose applications.
RoHS : Compliant

250 : $44.67
100 : $45.26
50 : $57.79
30 : $57.94
10 : $63.13
5 : $65.07
1 : $72.92

BB2-B0-26-650-521-C

Carling Technologies

Circuit Breaker 2Pole 50A
RoHS : Compliant

250 : $44.67
100 : $45.26
50 : $57.79
30 : $57.94
10 : $63.13
5 : $65.07
1 : $72.92

BB2-B0-26-650-G12-E

Carling Technologies

Hydraulic-magnetic circuit breaker with handle actuator 2-pole configuration AC long delay 50A current rating and UL489 listed certification.
RoHS : Compliant

250 : $44.67
100 : $45.26
50 : $57.79
30 : $57.94
10 : $63.13
5 : $65.07
1 : $72.92

BB2-D0-26-615-121-D

Carling Technologies

Hydraulic-magnetic circuit breaker with 2-pole configuration AC long time delay 15A current rating and push-on 0.250 tab terminals.
RoHS : Compliant

250 : $51.81
100 : $52.5
50 : $67.03
30 : $67.2
10 : $73.22
5 : $75.47
1 : $84.58

B51-B0-26-620-C1D-K3

Carling Technologies

B-Series hydraulic-magnetic circuit breaker with rocker actuator designed for precision overcurrent protection in OEM applications.
RoHS : Compliant

250 : $25.35
100 : $26.05
50 : $32.45
30 : $34.33
10 : $36.35
5 : $36.44
1 : $40.84

C12-B0-26-610-23A-CJ

Carling Technologies

C12B02661023ACJ
RoHS : Compliant

10 : $70.03
8 : $71.46
5 : $81.67
3 : $90.74

CB2-B0-26-616-122-C

Carling Technologies

CB2B026616122C
RoHS : Compliant

250 : $51.5
100 : $52.18
50 : $66.85
30 : $67.02
10 : $73.02
5 : $75.27
1 : $84.35

CB2-B0-26-650-322-E

Carling Technologies

CB2B026650322E
RoHS : Compliant

10 : $68.32
8 : $69.72
5 : $79.67
3 : $88.53

CF2-B0-26-650-644-D

Carling Technologies

CF2B026650644D
RoHS : Compliant

10 : $76.03
8 : $77.59
5 : $88.67
3 : $98.52

CD1-B0-26-615-21B-DG

Carling Technologies

CD1B02661521BDG
RoHS : Compliant

250 : $26.17
100 : $26.89
50 : $33.61
30 : $35.56
10 : $37.65
5 : $37.75
1 : $42.3

Pasternack Enterprises US

PE3C6026-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C6026-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C6026-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

370

PE3W00266

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-200 Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00266 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00266 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable using LMR-200 coax.

330

PE3W00266-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00266-36 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00266-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3M0266-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Male Cable 6 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0266-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0266-6 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0266-6 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to SMA male cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0266-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.

1 : $251.99
10 : $241.91
25 : $231.83
100 : $221.75

PE3C10266-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 48 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss F type to type F cable assembly has male gender on end 1 and male on end 2. PE3C10266-48 can also be known as a low loss type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type F plug to F type plug cable assembly PE3C10266-48 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F and F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $109.99
10 : $107.79
25 : $105.59
100 : $103.39

PE3C10266-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss type F to F type cable assembly has male gender on end 1 and male on end 2. PE3C10266-24 can also be known as a low loss type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. F type plug to type F plug cable assembly PE3C10266-24 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of F type and type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $101.99
10 : $99.95
25 : $97.91
100 : $95.87

PE3C10266-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 36 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 36 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and F type cable connection on the other. Our low loss type F to type F cable assembly has male gender on end 1 and male on end 2. PE3C10266-36 can also be known as a low loss type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type F plug to type F plug cable assembly PE3C10266-36 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of F type and type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $105.99
10 : $103.87
25 : $101.75
100 : $99.63

PE3W02662-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to SMA Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to SMA male cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMA male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMA cable connection on the other. Our a type N to a SMA cable assembly has female gender on end 1 and male on end 2. PE3W02662-36 can also be known as a type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W02662-36 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. Type N jack to SMA plug cable assembly PE3W02662-36 is built with RG316 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02662-36 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.

1 : $87.99
25 : $83.59
50 : $79.19
100 : $75.67

PE3W02667/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female to Mini UHF Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and mini UHF cable connection on the other. Our low loss type N to mini UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W02667/HS-24 can also be known as a low loss type N jack to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type jack to mini UHF plug cable assembly PE3W02667/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to mini UHF cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 2.5 GHz maximum frequency N type female to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02667/HS-24 can also be used in the other direction and will be mini UHF male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink.

1 : $70.99
25 : $67.44
50 : $63.89
100 : $61.05

PE3W02662-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to SMA male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMA male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMA cable connection on the other. Our a type N to a SMA cable assembly has female gender on end 1 and male on end 2. PE3W02662-24 can also be known as a type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W02662-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. Type N jack to SMA plug cable assembly PE3W02662-24 is built with RG316 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02662-24 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3W02667/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to Mini UHF Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and mini UHF cable connection on the other. Our low loss type N to mini UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W02667/HS-12 can also be known as a low loss type N jack to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type jack to mini UHF plug cable assembly PE3W02667/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to mini UHF cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 2.5 GHz maximum frequency type N female to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02667/HS-12 can also be used in the other direction and will be mini UHF male to N type female cable assembly if the opposite connectivity is required. Low loss type N jack to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE3W02663/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-240 Coax with HeatShrink. PE3W02663/HS is a N male to BNC male cable using LMR-240 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02663/HS N male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3M0026-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 SMA Male to TNC Male Cable 60 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3028 SMA to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3028 SMA cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/55-3028 SMA to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3028 SMA to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0026-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly PE3M0026-60 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/55-3028 SMA cable assembly is manufactured with M39012/55-3028 SMA to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/55-3028 SMA male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0026-60 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/55-3028 SMA male cable assembly if the opposite connectivity is required. M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3028 SMA to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3028 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax.

1 : $275.99
25 : $262.19
50 : $248.39

PE3W10266/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Female Bulkhead Cable Using RG142 Coax with HeatShrink. PE3W10266/HS is a BMA jack right angle 2 hole flange to SMA female bulkhead cable using RG142 coax. This Pasternack BMA jack right angle 2 hole flange to SMA female bulkhead cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. BMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack BMA right angle 2 hole flange to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10266/HS BMA jack right angle 2 hole flange to SMA female bulkhead cable assembly is constructed with RG142 coax.

PE3W02666

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Jack Bulkhead Cable Using LMR-100 Coax. PE3W02666 is a SMA male right angle to SMB jack bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to SMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02666 SMA male right angle to SMB jack bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

1-2420266-2

TE Connectivity

Socket HSG 2X6P Blue HCI 4.0 Pitch Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 12 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-2 | Internal Number: 1-2420266-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.56
500 : $0.58
250 : $0.6
100 : $0.62
50 : $0.63
1 : $0.7

12,450

1-2420266-4

TE Connectivity

Socket HSG 2X7P Blue HCI 4.0 Pitch Number of Positions: 14 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 14 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-4 | Internal Number: 1-2420266-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.59
500 : $0.61
250 : $0.63
100 : $0.65
50 : $0.67
1 : $0.73

12,002

3-2420266-3

TE Connectivity

Socket HSG 3P Red HCI 4.0 Pitch Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 3 Housing for Female Terminals Crimp | Part Number: 3-2420266-3 | Internal Number: 3-2420266-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.17
500 : $0.17
250 : $0.18
100 : $0.18
50 : $0.19
1 : $0.21

12,000

1-2420266-0

TE Connectivity

Socket HSG 2X5P Blue HCI 4.0 Pitch Number of Positions: 10 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 10 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-0 | Internal Number: 1-2420266-0 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.52
250 : $0.54
100 : $0.55
50 : $0.57
1 : $0.63

12,000

2420266-6

TE Connectivity

Socket HSG 2X3P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-6 | Internal Number: 2420266-6 | TE Connectivity
RoHS : Compliant

1,000 : $0.25
500 : $0.26
250 : $0.27
100 : $0.28
50 : $0.29
1 : $0.32

11,998

2420266-4

TE Connectivity

Socket HSG 4P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-4 | Internal Number: 2420266-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.22
500 : $0.22
250 : $0.23
100 : $0.24
50 : $0.25
1 : $0.27

11,980

2420266-3

TE Connectivity

Socket HSG 3P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-3 | Internal Number: 2420266-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.18
500 : $0.18
250 : $0.19
100 : $0.2
50 : $0.2
1 : $0.22

11,973

2420266-5

TE Connectivity

Socket HSG 5P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-5 | Internal Number: 2420266-5 | TE Connectivity
RoHS : Compliant

1,000 : $0.28
500 : $0.29
250 : $0.3
100 : $0.31
50 : $0.31
1 : $0.35

11,944

2420266-8

TE Connectivity

Socket HSG 2X4P Blue HCI 4.0 Pitch Number of Positions: 8 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 8 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-8 | Internal Number: 2420266-8 | TE Connectivity
RoHS : Compliant

1,000 : $0.42
500 : $0.43
250 : $0.45
100 : $0.46
50 : $0.48
1 : $0.52

11,918

2-2420266-2

TE Connectivity

Socket HSG 2P Yellow HCI 4.0 Pitch Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 2 Housing for Female Terminals Crimp | Part Number: 2-2420266-2 | Internal Number: 2-2420266-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.14
500 : $0.14
250 : $0.14
100 : $0.15
50 : $0.15
1 : $0.17

9,955

2420266-2

TE Connectivity

Socket HSG 2P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-2 | Internal Number: 2420266-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.27
500 : $0.28
250 : $0.29
100 : $0.3
50 : $0.3
1 : $0.33

9,835

2-2420266-3

TE Connectivity

Socket HSG 3P Yellow HCI 4.0 Pitch Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 3 Housing for Female Terminals Crimp | Part Number: 2-2420266-3 | Internal Number: 2-2420266-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.16
500 : $0.17
250 : $0.17
100 : $0.18
50 : $0.19
1 : $0.2

9,775

170266-2

TE Connectivity

POSITIVE LOCK RECEPTACLE ELECTRO TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 12 – 10 AWG Wire Size: 3.31 – 5.26 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 12 – 10 AWG 3.31 – 5.26 mm² | Quick Disconnect | Part Number: 170266-2 | Internal Number: 170266-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.36
1,000 : $0.42
500 : $0.48
250 : $0.5
100 : $0.57
50 : $0.63
25 : $0.67
10 : $0.75
1 : $0.83

6,923

Vyrian

BB3-B0-26-620-121-D

Carling Technologies

Magnetic Circuit Breaker, 3 Pole(s), 20A, 277VAC, Panel Mount
RoHS : Compliant

16,866

2026-60-C2LF

Bourns Inc

Surge Protection Circuit
RoHS : Compliant

13,655

2702663

Phoenix Contact

Power/Signal Relay, DPST, Momentary, 0.045A (Coil), 30VDC (Coil), 1080mW (Coil), 250VDC (Contact), DC Input, Random, AC/DC Output, DIN-Rail Mount
RoHS : Compliant

12,687

2202663

Phoenix Contact

Enclosures/Accessories
RoHS : Compliant

11,874

BB2-B0-26-625-522-D

Carling Technologies

Magnetic Circuit Breaker, 2 Pole(s), 25A, 250VAC, Panel Mount
RoHS : Compliant

11,176

2202664

Phoenix Contact

Enclosures/Accessories
RoHS : Compliant

9,957

CF2-B0-26-650-644-D

Carling Technologies

Magnetic Circuit Breaker, 2 Pole(s), 50A, 250VAC, Panel Mount
RoHS : Compliant

8,151

LM2738YMYX-J7002667

Texas Instruments

7,023

5962-01-026-6045

Texas Instruments

OTP ROM, 32X8, 40ns, TTL, PDIP16
RoHS : Not Compliant

5,823

2302667

Phoenix Contact

Cable Assembly, 40 Conductor(s), 26AWG, 60V, Communication Cable
RoHS : Compliant

5,402

3026654

Phoenix Contact

Fuses/Accessories
RoHS : Compliant

5,031

LM2738YMY-J7002666

Texas Instruments

4,633

5502667-1

TE Connectivity

Connector Accessory
RoHS : Compliant

2,891

50PQ32202660K

KEMET Corporation

Film Capacitor, Polyester, 630V, 10% +Tol, 10% -Tol, 0.22uF, Through Hole Mount

546

2170266

Lapp Group Pvt

Wire And Cable, 2 Conductor(s), Communication Cable

462

Waytek, Inc.

12010266

Aptiv PLC

Aptiv 12010266 rosebud clip for 1.00 conduit is a loom-retention clip designed to secure 1.00" conduit to panels or mounting points. Its rosebud-style head supports organized harness routing and stable attachment in vehicle and equipment wiring applications.

50 : $0.2449
200 : $0.2317
500 : $0.2151
1,000 : $0.2067

Win Source Electronics

MPC8314ECVRAGDA400/266MHZ

Freescale Semiconductor

1 : $582.4

560

0266RLK-R Distributor

Link URL