028KVK-R Price, Distributor, Stock

Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Maximum VSWR: 1.35:1, Maximum Attenuation: 5.7 dB. 50 Ohm N Female To 75 Ohm N Male Matching Pad Operating From DC to 500 MHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE7028 from Pasternack has N connector in and is 50 Ohm, N connector out and is 75 Ohm. This coaxial N to N impedance matching pad has a female N in and a male N out. Our 50 Ohm N to 75 Ohm N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 500 MHz. This radio frequency 50 Ohm N female to 75 Ohm N male RF impedance matching pad design has a maximum attenuation of 5.7 and an attenuation accuracy of 0.5 dB. Body material of the 50 Ohm to 75 Ohm N To N matching pad is brass. 50 Ohm N female to 75 Ohm N male RF impedance pad PE7028 from Pasternack is rated for a maximum VSWR of 1.35:1 and a maximum input power of 1 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with N to N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts.

1 : $42.19
25 : $40.08
50 : $37.97
100 : $36.28

389

PE3W02817-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly TNC male to N male low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N male low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W02817-60 can also be known as a low loss TNC plug to N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W02817-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02817-60 can also be used in the other direction and will be type N male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N male low loss cable 60 inch length using LMR-400-UF coax.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

313

PE3C10282-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Male to N Male Low Loss Cable 12 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10282-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10282-12 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $56.79
10 : $55.65
25 : $54.52
100 : $53.38

202

PEANGPS1028-TF

Pasternack Enterprises

Key Specifications, Antenna Type: GPS/GNSS Active, Polarization: RHCP, Minimum Frequency: 1.16 GHz, Maximum Frequency: 1.61 GHz, Connector Series: TNC, Connector Gender: Female, Nominal Gain: 41.8 dBi, Maximum Input VSWR: 1.8:1. Anti-Jam Multi-Constellation Triple-Band GNSS Antenna, 40dB LNA, TNC Female, Extended Filtering, Low-Angle Jamming Suppression., The PEANGPS1028-TF from Pasternack is a multi-band GPS/GNSS active antenna with an integrated low noise amplifier (LNA) that we offer with global same-business-day shipping. Our RHCP polarized GNSS antenna has a maximum input VSWR of 1.8:1. Our GPS/GNSS active quadrifilar helix antenna is designed to operate within a DC voltage range of 2.5 to 16 Volts. This anti-jam multi-constellation antenna provides low-angle jamming suppression. Pasternack’s PEANGPS1028-TF multi-band GNSS antenna can operate at frequencies ranging from 1.16 to 1.25 GHz and 1.56 to 1.61 GHz. Our antenna can withstand temperatures ranging from -40 to 85 deg C. This GPS/GNSS active antenna has a TNC female connector. Our RHCP polarized antenna is designed with a through-hole mount type for secure installation. This RHCP polarized antenna has an overall length of 3.5 inches, a width of 3.5 inches, and a weight of 0.55 lbs. Our PEANGPS1028-TF multi-band GNSS antenna has a nominal gain of 43.7 dBic. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of GPS/GNSS active antennas for international and domestic orders. Make your online purchase right now to take advantage of our same business day shipping with no MOQs (minimum order quantities). For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal multi-band GNSS antenna for your requirements.

1 : $908.15
10 : $889.99
25 : $871.82
100 : $853.66

PEWPR028-7

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz, Beam Width V: 60, Beam Width H: 115. WR-28 Waveguide Probe Antenna Operating from 26.5 GHz to 40 GHz, 6.5 dBi Nominal Gain, UG-599/U Flange. Pasternack’s PEWPR028-7 WR-28 waveguide horn is also known as a waveguide horn antenna. This WR-28 probe waveguide antenna has a nominal gain of 6.5 dBi. Our waveguide horn can operate at frequencies ranging from 26.5 to 40 GHz. The probe antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 6.5 dBi waveguide horn from Pasternack has an overall length of 2.8 inches, a width of 0.75 inches, and a weight of 0.07 lbs. Our WR-28 waveguide horn antenna has a typical vertical beam width of 60 degrees and a horizontal beam width of 115 degrees at 3 dB. Our antenna comes with a UG-599/U flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-28 probe antenna has a copper body with gold plating. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-28 waveguide horn antenna with 6.5 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,810.0
5 : $1,737.6
10 : $1,665.2
25 : $1,592.8

PE3C3028/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Push-On SMP Female Right Angle to SMA Male Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SMA male cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Push-on SMP female right angle to SMA male cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE3C3028/HS-12 can also be known as a right angle SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP jack to SMA plug cable assembly PE3C3028/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3028/HS-12 RF cable are available on our downloadable PDF datasheet.PE3C3028/HS-12 can also be used in the other direction and will be SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3M0280-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 D38999 Contact Pin to SMA Male Cable 6 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0280-6 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0280-6 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and FEP dielectric type. The PE3M0280-6 between-series RF cable has 0.4 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. SMPS pin to SMA male cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0280-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMA RF cable are available on our downloadable PDF datasheet. SMPS pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMA RF cable assembly as per your requirements.

1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63

PE3M0287-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to SMA Male Cable 12 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0287-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0287-12 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMZ socket to SMA male cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0287-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.

1 : $201.99
10 : $193.91
25 : $185.83
100 : $177.75

PE3W02818LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using RG142 Coax, LF Solder. PE3W02818LF is a SMA male right angle to SMA male right angle cable using RG142 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02818LF SMA male right angle to SMA male right angle cable assembly is constructed with RG142 coax.

PE3W02849

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG174 Coax. PE3W02849 is a SMA female bulkhead to SMA female bulkhead cable using RG174 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02849 SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG174 coax.

PE3W02862-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Cable 60 Inch Length Using RG223 Coax., Radio frequency assembly N male to TNC male cable 60 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to TNC male cable 60 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assembly has male gender on end 1 and male on end 2. PE3W02862-60 can also be known as a type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Type N plug to TNC plug cable assembly PE3W02862-60 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W02862-60 RF cable are available on our downloadable PDF datasheet.PE3W02862-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W02894

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Cable Using PE-C100-LSZH Coax. PE3W02894 is a reverse polarity SMA male to reverse polarity SMA female cable using PE-C100-LSZH coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02894 SMA reverse polarity male to SMA reverse polarity female cable assembly is constructed with PE-C100-LSZH coax.

PE3W05028/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male Right Angle to TNC Male Right Angle Cable Using RG174 Coax with HeatShrink., Pasternack’s PE3W05028/BK/HS right angle BNC male to right angle TNC male RF cable assembly using RG174 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity BNC cable connection on one end and a right angle TNC cable connection on the other. Our reverse polarity BNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05028/BK/HS can also be known as a right angle reverse polarity BNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3W05028/BK/HS RF cable has a pvc jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This PE3W05028/BK/HS reverse polarity BNC plug to TNC plug cable assembly is built with RG174, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05028/BK/HS can also be used in the other direction and will be a right angle TNC male to right angle reverse polarity BNC male cable assembly if the opposite connectivity is required. This BNC reverse polarity right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC RF cable assembly as per your requirements.

PE3W20289/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 72 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-72 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-72 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-72 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-72 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-72 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $171.94
10 : $165.06
25 : $158.18
100 : $151.31

PE3W21028

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SSMC Plug Right Angle Cable Using PE-P086HF Coax. PE3W21028 is a SMA female bulkhead to SSMC plug right angle cable using PE-P086HF coax. This Pasternack SMA female bulkhead to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug SSMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21028 SMA female bulkhead to SSMC plug right angle cable assembly is constructed with PE-P086HF coax.

Teledyne HiRel

M38510/28902BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/28904BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/28902BYA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/28902BXA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/28904BYA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/28904BXA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

LCR2512-R028FT

VENKEL LTD

Low Value CR;2512;28m;�1%
RoHS : Compliant

2,000

SMPI606028-330NU

VENKEL LTD

Square Miniature Power Inductor;606028;33uH;�30%
RoHS : Compliant

SMPI606028-180NU

VENKEL LTD

Square Miniature Power Inductor;606028;18uH;�30%
RoHS : Compliant

SMPI606028-330MU

VENKEL LTD

Square Miniature Power Inductor;606028;33uH;�20%
RoHS : Compliant

SMPI606028-4R7NU

VENKEL LTD

Square Miniature Power Inductor;606028;4.7uH;�30%
RoHS : Compliant

C1210X7R102-822KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;1000V;8200pF;�10%
RoHS : Compliant

C1812X7R202-821KNE

VENKEL LTD

HV Chip Capacitor;1812;X7R;2000V;820pF;�10%
RoHS : Compliant

C1808X7R102-822KNE

VENKEL LTD

HV Chip Capacitor;1808;X7R;1000V;8200pF;�10%
RoHS : Compliant

C1812C0G202-820JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;2000V;82pF;�5%
RoHS : Compliant

C1808C0G302-8R2CNE

VENKEL LTD

HV Chip Capacitor;1808;C0G;3000V;8.2pF;�0.25pF
RoHS : Compliant

C1808X7R102-821KNE

VENKEL LTD

HV Chip Capacitor;1808;X7R;1000V;820pF;�10%
RoHS : Compliant

C1812C0G102-821KNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;1000V;820pF;�10%
RoHS : Compliant

SAFC2211X7R502-821KNE

VENKEL LTD

Safety Cap;2211;X7R;X1/Y2;820pF;�10%
RoHS : Compliant

SAFC1812X7R502-821KNE

VENKEL LTD

Safety Cap;1812;X7R;X1/Y2;820pF;�10%
RoHS : Compliant

SAFC2208X7R502-821KNE

VENKEL LTD

Safety Cap;2208;X7R;X1/Y2;820pF;�10%
RoHS : Compliant

Vyrian

AP130-28RG-7

Diodes Incorporated

Fixed Positive LDO Regulator, 2.8V, 0.5V Dropout, CMOS, PDSO3

14,055

AP7370-28W5-7

Diodes Incorporated

Fixed Positive LDO Regulator, 2.8V, PDSO5

12,966

1810286

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

10,259

5962-00-289-9836

Texas Instruments

Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant

9,145

LT3028IFE-TRPBF

Analog Devices Inc

8,760

15KPA028-SD-Q

Bourns Inc

Trans Voltage Suppressor Diode, 15000W, 28V V(RWM), Unidirectional, 1 Element, Silicon, DO-218
RoHS : Compliant

8,628

LT3028EFE#TRPBF

Analog Devices Inc

Adjustable Positive LDO Regulator, 2 Output, 1.22V1 Min, 1.22V2 Min, 20V1 Max, 20V2 Max, PDSO16
RoHS : Compliant

7,700

SN36028RTYR

Texas Instruments

7,098

JM38510/371028FA

Texas Instruments

6,551

PSMN028-100HSX

Nexperia

RoHS : Compliant

4,945

XC4028XL-3BGG256C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 166MHz, CMOS, PBGA256
RoHS : Compliant

3,898

XC4028EX-BG352C

AMD Xilinx

3,145

XC4028XL-09PG299C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 217MHz, 1024-Cell, CMOS, CPGA299
RoHS : Compliant

2,282

0285010HXP

Littelfuse Inc

Electric Fuse, 10A, 250VAC, 1500A (IR), Inline/holder, 5x20mm
RoHS : Compliant

929

0285002MXRP

Littelfuse Inc

Electric Fuse, 2A, 250VAC, 1500A (IR), Inline/holder, 5x20mm
RoHS : Compliant

726

Win Source Electronics

DEA205425BT-2028A4

TDK Corporation

FILTER BANDPASS 5GHZ W-LAN SMD
RoHS : Compliant

4,740 : $0.0709
3,795 : $0.0738
2,920 : $0.0767
2,040 : $0.0824
1,315 : $0.0853
620 : $0.0911

50,000

DMP3028LFDE-13

Diodes Incorporated

MOSFET P-CH 30V 6.8A 6UDFN
RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

37,296

BSZ028N04LSATMA1

Infineon Technologies AG

MOSFET N-CH 40V 21A/40A TSDSON / N-Channel 40 V 21A (Ta), 40A (Tc) 2.1W (Ta), 63W (Tc) Surface Mount PG-TSDSON-8-FL
RoHS : Compliant

360 : $0.936
270 : $1.044
210 : $1.08
155 : $1.116
100 : $1.152
40 : $1.4039

30,650

0287025.PXCN

Littelfuse Inc

FUSE AUTOMOTIVE 25A 32VDC BLADE / ATOF™ Blade Fuse Rated 32V
RoHS : Compliant

4,785 : $0.0627
3,580 : $0.0699
2,770 : $0.0723
2,010 : $0.0748
1,300 : $0.0772
535 : $0.094

30,000

SRU5028-100Y

Bourns Inc

Inductor Power Shielded Wirewound 10uH 30% 100KHz 18Q-Factor Ferrite 1.8A 0.063Ohm DCR T/R
RoHS : Compliant

590 : $0.5105
440 : $0.5694
340 : $0.5891
250 : $0.6087
160 : $0.6283
70 : $0.7658

27,000

CRCW040280K6FKED

Vishay Huntington

RES SMD 80.6K OHM 1% 1/16W 0402

53,575 : $0.0056
40,325 : $0.0062
31,250 : $0.0064
22,730 : $0.0066
14,710 : $0.0068
6,025 : $0.0083

20,000

TLIN10285DRQ1

Texas Instruments

IC TRANSCEIVER 1/1 8SOIC / 1/1 Transceiver LIN 8-SOIC
RoHS : Compliant

355 : $0.8545
285 : $0.8892
220 : $0.9239
155 : $0.9934
100 : $1.0281
50 : $1.0976

10,000

0287002.PXCN

Littelfuse Inc

FUSE AUTO 2A 32VDC BLADE / ATOF™ Blade Fuse Rated 32V
RoHS : Compliant

3,955 : $0.0759
2,960 : $0.0846
2,290 : $0.0875
1,660 : $0.0904
1,075 : $0.0934
440 : $0.1138

8,000

6469028-1

TE Connectivity

CONN RCPT 40POS DUAL R/A HM-ZD
RoHS : Compliant

82 : $3.6833
61 : $4.1083
48 : $4.2499
35 : $4.3916
23 : $4.5332
10 : $5.5249

5,000

B50285C1KFBG

Broadcom Limited

OCTAL-PORT QSGMII GPHY

17 : $19.973
13 : $22.2775
10 : $23.0457
8 : $23.8139
5 : $24.5821
2 : $29.9594

4,569

AD8028ARZ-REEL7

Analog Devices Inc

IC OPAMP VFB 190MHZ RRO 8SOIC
RoHS : Compliant

36 : $8.3864
29 : $8.7273
23 : $9.0682
16 : $9.75
10 : $10.091
5 : $10.7728

3,660

LT1028CS8#TRPBF

Linear Technology

IC OPAMP GP 75MHZ 8SO
RoHS : Compliant

21 : $14.7048
16 : $16.4015
12 : $16.9671
9 : $17.5326
6 : $18.0982
3 : $22.0572

3,630

AD8028ARZ-REEL

Analog Devices Inc

IC OPAMP GP 2 CIRCUIT 8SOIC / General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC
RoHS : Compliant

36 : $8.3864
29 : $8.7273
23 : $9.0682
16 : $9.75
10 : $10.091
5 : $10.7728

3,600

MAX1028BEEP

Maxim Integrated Products

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference
RoHS : Not Compliant

19 : $16.4832
14 : $18.3851
11 : $19.0191
8 : $19.6531
5 : $20.287
3 : $24.7248

2,000

CY7C028-15AXI

Cypress Semiconductor

32K/64K x 16/18 Dual-Port Static RAM
RoHS : Compliant

3 : $128.0304
2 : $142.8031
1 : $147.7273

1,019

Wuhan P&S

10145028-030LF

Amphenol FCi

Wire-to-board connector, socket, 30 positions, left and right double row

1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01

5,000

10028917-001LF

Amphenol FCi

Power Header 2x2
RoHS : Compliant

1 : $7.05
100 : $6.74
500 : $5.9
1,000 : $5.69

300

028KVK-R Distributor

Link URL