041JVCK-R Price, Distributor, Stock

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

E5-2-041-041

Southco

304110041556

Essentra Components

77-04-104-13

Southco

47-12-504-15

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

47-12-604-14

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

4C-PH-04-1F1-W013

Southco

4C-PH-04-1F1-W013

504112201530

Essentra Components

LINEAR HANDLE LATCH V1 D15 C30

183041570409

Essentra Components

PEEK SOCKET HEAD SCREW M4 X 15

Essentra Components

Southco

Southco

Southco

Southco

Avdel

TSN INS M4 LP SS

EBV Elektronik

204-10USOC/S530-A6/TR1(A)

Everlight Electronics Co Ltd

LED UniColor Red Orange 621nm Standard LED 2Pin TR (Alt: L101000659)
RoHS : Compliant

35,000

204-10SUGC/S400-A5

Everlight Electronics Co Ltd

LED UniColor Green 518nm 2Pin T1 TR (Alt: 3002045704)
RoHS : Compliant

19,000

TS4041CILT-1.2

STMicroelectronics

VRef Precision 1225V 12mA 3Pin SOT23 TR (Alt: TS4041CILT-1.2)
RoHS : Compliant

12,000

EL3041M-V

Everlight Electronics Co Ltd

Optocoupler Triac ACOUT 1CH 400VDRM 6Pin PDIP Tube (Alt: 3903410009)
RoHS : Compliant

10,985

204-10UYD/S530-A3/TR1(A)

Everlight Electronics Co Ltd

Low Power LEDs none SSL (Alt: L101000167)
RoHS : Compliant

10,000

CY8C5667LTI-LP041

Infineon Technologies AG

PSoC 5LP RISC 32Bit 67MHz 18V25V33V5V 68Pin QFN Tray (Alt: SP005655411)
RoHS : Compliant

7,800

LM4041CYM3-ADJ-TR

Microchip Technology Inc

SHUNT VOLTAGE REFERENCE ADJUSTABLE 124V TO 10V 05 ACCUR (Alt: LM4041CYM3-ADJ-TR)
RoHS : Compliant

6,000

Z0109NA0,412

WeEn Semiconductor Co Ltd

Thyristor TRIAC 800V 138A 3Pin TO92 Bulk (Alt: Z0109NA0,412)
RoHS : Compliant

5,000

MCXC041VFG

NXP Semiconductors

ARM MCU 32bit ARM CortexM0 48 MHz 32 Kilobytes 2 Kilobytes 16 Pins QFN (Alt: MCXC041VFG)
RoHS : Compliant

3,430

MCXC041VFK

NXP Semiconductors

ARM MCU 32bit ARM CortexM0 48 MHz 32 Kilobytes 2 Kilobytes 24 Pins QFN (Alt: MCXC041VFK)
RoHS : Compliant

3,430

KSZ8041NLI-TR

Microchip Technology Inc

Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V QFN 32 Pins (Alt: KSZ8041NLI-TR)
RoHS : Compliant

2,000

IPP041N12N3GXKSA1

Infineon Technologies AG

Trans MOSFET NCH 120V 120A 3Pin TO220 Tube (Alt: SP000652746)
RoHS : Compliant

2,000

CY7C1041GN30-10ZSXIT

Infineon Technologies AG

SRAM Chip Async Single 33V 4MBit 256K x 16 10ns 44Pin TSOPII TR (Alt: SP005648579)
RoHS : Compliant

2,000

STM32G041K8U6

STMicroelectronics

ARM MCU 32bit ARM CortexM0 64 MHz 64 KB 8 KB 32 Pins UFQFPNEP (Alt: STM32G041K8U6)
RoHS : Compliant

980

CY7C1041GN-10ZSXI

Infineon Technologies AG

SRAM Chip Async Single 5V 4MBit 256K x 16 10ns 44Pin TSOPII (Alt: SP005648559)
RoHS : Compliant

675

Neutron USA

6110.4130

Schurter Electronic Components

AC Power Entry Modules 6110 APPLIANCE INLET 10A 120C
RoHS : Compliant

1 : $24.99

TMLM 04124

Traco Power

Switching Power Supplies

1 : $67.18

09041326951

HARTING Technology Group

DIN 41612 Connectors DIN-POWER D032MS-3,0C1-2-V2
RoHS : Compliant

1 : $39.99

DSOS-0416-24D

Delta Electronics Inc

Solenoids & Actuators Solenoid, Open Frame, Intermittent, Duty Cycle 50%, 1.5 sec on, 24VDC, 160ohm

1 : $28.39

DTM04-12PC

TE Connectivity

DEUTSCH Automotive DTM RECP ASM
RoHS : Compliant

1 : $149.85

AUB0412VD-00

Delta Electronics Inc

DC Fans DC Axial Fan, 40x20mm, 12VDC 0.96W, 9.6CFM 26.5dB, Tach

1 : $99.57

704.124.0

EAO AG

Keylock Switch Actuator,Round,29mm,3 Position,MAINT(a)-Rest-MOM,Aluminum Bezel
RoHS : Compliant

1 : $129.99

09A30-04-1-07N

Grayhill Inc

Rotary Switches 09A30-04-1-07N
RoHS : Compliant

1 : $224.99

0804109:0041

Phoenix Contact

Terminal Block Tools & Accessories SK 3,81/2,8 FORTL.ZAHLEN 41-5

1 : $44.99

30418-10

Littelfuse Inc

Circuit Breakers ATM_BRKR TYPE 1, 10A

1 : $44.99

FFB0412VHN-BR00

Delta Electronics Inc

DC Fans 40x40x28mm 12V DC 1.92W, 15.8CFM 45dB, Locked Rotor Sensor
RoHS : Compliant

1 : $119.21

AXG98041

Axiom Manufacturing

AXIOM 12FT CAT6A BENDNFLEX CAB (WHITE)

1 : $39.99

AFB0412HHA-TA5F

Delta Electronics Inc

DC Fans 40x40X10mm 12V 0.05A 0.6W, 8.15CFM 7000RPM 31.5dBA BB, Speed Sensor (Tach), IP55 Dust/water Resist, 3 Wire Leads, Plastic Frame/Blade
RoHS : Compliant

1 : $88.15

9GA0412P3K011

Sanyo-Denki Co Ltd

DC Fan Sq40x28mm 12VDC 11W, 22krpm 28.6CFM 61dB, Tach PWM, 8.1CFM at 0%PWM, 4 Wire, Plastic F/B

1 : $93.58

M3786/4-4041

Grayhill Inc

Switch Rotary SP6T 6 Flatted Shaft Solder Lug 5A 115VAC 28VDC

1 : $294.99

Pasternack Enterprises US

PE3W04104-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Pasternack’s PE3W04104-12 low loss SMA male to type N female bulkhead RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to type N female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W04104-12 can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04104-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead type N female cable has a maximum VSWR of 1.4:1. This PE3W04104-12 SMA plug to type N jack cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04104-12 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE3C10412-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated BNC Male to BNC Male Low Loss Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated BNC male to BNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to BNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10412-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10412-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. BNC plug to BNC plug cable assembly PE3C10412-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements.

1 : $149.99
25 : $143.99
50 : $139.49
100 : $136.49

PE3C10413-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to N Male Low Loss Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10413-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10413-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10413-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $137.99
25 : $132.47
50 : $128.33
100 : $125.57

PE7604-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10dB RF fixed attenuator 50W, DC to 18GHz, N-type male to N-type female. The PE7604-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 50 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with N-type connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7604-10 attenuator is rated for up to 18 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum N-type connector with gold-plated brass contact. Our fixed RF attenuator PE7604-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $565.0
10 : $553.7
25 : $542.4
100 : $531.1

PE3C10418-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $153.99
25 : $147.83
50 : $143.21
100 : $140.13

PE3C8041

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax.

PE3W00416-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMB Plug Right Angle Cable 36 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to SMB plug right angle cable 36 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMB plug right angle cable 36 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMB cable connection on the other. Our low loss SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3W00416-36, can also be known as a low loss SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3W00416-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00416-36 can also be used in the other direction and will be right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug right angle cable 36 inch length using PE-C100-LSZH coax.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

PE3W02041

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm.

PE3W04111

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to Reverse Polarity TNC Male Cable Using RG316-DS Coax. PE3W04111 is a MMCX plug to reverse polarity TNC male cable using RG316-DS coax. This Pasternack MMCX plug to reverse polarity TNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. Our plug MMCX to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04111 MMCX plug to TNC reverse polarity male cable assembly is constructed with RG316-DS coax.

PE3W04148

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to MMCX Jack Cable Using LMR-100 Coax. PE3W04148 is a TNC female bulkhead to MMCX jack cable using LMR-100A coax. This Pasternack TNC female bulkhead to MMCX jack cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MMCX for connector 2. Our female TNC bulkhead to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04148 TNC female bulkhead to MMCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W04161-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMB Plug to N Female Cable 150 cm Length Using RG141 Coax., Radio frequency assembly SMB plug to N female cable 150 cm length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to N female cable 150 cm length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and type N cable connection on the other. Our SMB to type N cable assemblies have a plug gender on end 1 and female on end 2. This SMB to N type cable is a plug to female coax assembly, PE3W04161-150CM, can also be known as a SMB male to type N jack cable assembly and will be shipped same-day as it is purchased. SMB male to type N jack cable assembly PE3W04161-150CM is built with RG141 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMB plug to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04161-150CM can also be used in the other direction and will be N type female to SMB plug cable assembly if the opposite connectivity is required. SMB male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to N female cable 150 cm length using RG141 coax.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3C10419-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male right angle low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male right angle low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10419-60 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10419-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10419-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10419-60 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $163.99
25 : $157.43
50 : $152.51
100 : $149.23

PE3C9041

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to 4.3-10 Female 4 Hole Flange Cable Using PE-SR402AL Coax. PE3C9041 is a 4.3-10 male to 4.3-10 female 4 hole flange cable using PE-SR402AL coax. This Pasternack 4.3-10 male to 4.3-10 female 4 hole flange cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to female 4.3-10 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9041 4.3-10 male to 4.3-10 female 4 hole flange cable assembly is constructed with PE-SR402AL coax.

PE3W03041

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to BNC Male Cable Using RG8X Coax. PE3W03041 is a reverse polarity TNC female to BNC male cable using RG8X coax. This Pasternack reverse polarity TNC female to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity female TNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03041 TNC reverse polarity female to BNC male cable assembly is constructed with RG8X coax.

PE3W04147/PH180

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm.

TE Connectivity

52041-1

TE Connectivity

TERMINAL,R PG 8 1/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 8 AWG Wire Size: 8 mm² Wire Size: 13100 – 20800 CMA Stud Size: 1/4 M6 Closed Ring Tongue Terminal 8 AWG 8 mm² 13100 – 20800 CMA | Ring Terminal | Part Number: 52041-1 | Internal Number: 52041-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.39
500 : $1.43
250 : $1.47
100 : $1.51
50 : $1.55
25 : $1.6
10 : $1.64
1 : $1.68

17,072

T4041037041-000

TE Connectivity

M8.FMLE.PNLREAR.4POS.STR PCBSHLD Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 12.6 | M8 Panel Mount PCB | Part Number: T4041037041-000 | Internal Number: T4041037041-000 | TE Connectivity
RoHS : Compliant

250 : $21.87
100 : $22.74
50 : $23.62
25 : $24.5
10 : $25.37
1 : $26.25

1,621

2-2448104-1

TE Connectivity

DT06-4S-TN09, PLG, 4S, BRN, N Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Color Connector | 24 V | Part Number: 2-2448104-1 | Internal Number: 2-2448104-1 | Alias Number: DT06-4S-TN09 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $2.11

1,194

T4041017041-000

TE Connectivity

M8.FMLE.PNLREAR.4POS.STR PCB Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 12.6 | M8 Panel Mount PCB | Part Number: T4041017041-000 | Internal Number: T4041017041-000 | TE Connectivity
RoHS : Compliant

250 : $21.31
100 : $22.16
50 : $23.02
25 : $23.87
10 : $24.71
1 : $25.57

715

T4130412041-000

TE Connectivity

M12,REAR MOUNT,MALE,B,4P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 18 | M12 Panel Mount Solder Cup | Part Number: T4130412041-000 | Internal Number: T4130412041-000 | TE Connectivity
RoHS : Compliant

100 : $19.99
50 : $20.95
25 : $21.89
10 : $22.84
1 : $23.8

216

T4072014041-001

TE Connectivity

M8.MLE.PNLFRONT.4POS.STR WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 12.6 | M8 Panel Mount Wire | Part Number: T4072014041-001 | Internal Number: T4072014041-001 | TE Connectivity
RoHS : Compliant

250 : $26.44
100 : $27.5
50 : $28.56
25 : $29.62
10 : $30.67
1 : $31.73

154

DT04-12PA-LE09

TE Connectivity

REC, 12P, BLK, N, CAP, FLANGE, A Nominal Voltage Architecture: 24 V 48 V 12 V Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Flange Receptacle Connector | 24 V 12 | Part Number: DT04-12PA-LE09 | Internal Number: DT04-12PA-LE09 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $27.68

DTM04-12PC

TE Connectivity

REC, 12P, GRN, N, C Nominal Voltage Architecture: 24 V 48 V 12 V Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1 mm Deutsch Dtm Housing | 24 V 12 | Part Number: DTM04-12PC | Internal Number: DTM04-12PC | Alias Number: ZPF000000000130573 | 1 mm | TE Connectivity
RoHS : Compliant

1 : $5.94

T4140412021-000

TE Connectivity

M12,REAR MOUNTING,MALE,B CODE,2P Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 2 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 2 18 | M12 Panel Mount PCB | Part Number: T4140412021-000 | Internal Number: T4140412021-000 | TE Connectivity
RoHS : Compliant

500 : $14.32
250 : $14.81
100 : $15.31
50 : $15.8
25 : $16.29
10 : $16.79
1 : $17.28

ASTA157NN00410235000

TE Connectivity

623 PLUG Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Circular Connector Shell Size: 23 Sealable: No Circuit Application: Signal Cable-to-Cable Circular Connector Plug 23 | Standard Circular Connector | Part Number: ASTA157NN00410235000 | Internal Number: ASA157N00410235000 | TE Connectivity
RoHS : Compliant

25 : $30.59
10 : $32.94
1 : $35.29

ASTA222NN00410100000

TE Connectivity

623 plug, speedtec Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 21 Circular Connector Shell Size: 23 Sealable: No Cable-to-Cable Circular Connector Plug 21 23 | Standard Circular Connector | Part Number: ASTA222NN00410100000 | Internal Number: ASA222N00410100000 | TE Connectivity
RoHS : Compliant

25 : $30.59
10 : $32.94
1 : $35.29

ASTA020NN00410235000

TE Connectivity

623 PLUG Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 23 Sealable: No Cable-to-Cable Circular Connector Plug 12 23 | Standard Circular Connector | Part Number: ASTA020NN00410235000 | Internal Number: ASA020N00410235000 | TE Connectivity
RoHS : Compliant

25 : $29.41
10 : $31.67
1 : $33.92

DK-621-0412-S

TE Connectivity

DK-621-0412-S Data Bus Connector Type: Jack Data Bus Connector Style: Threaded Contact Type: Socket Jack Threaded Socket | Data Bus Connector | Part Number: DK-621-0412-S | Internal Number: 503123-000 | Alias Number: 1-1193787-5 | TE Connectivity
RoHS : Compliant

1 : $211.99

DK-621-0412-P

TE Connectivity

1 : $204.64

DT04-12PD

TE Connectivity

REC, 12P, BRN, N, D Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Receptacle Connector | 12 V | Part Number: DT04-12PD | Internal Number: DT04-12PD | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $7.55

Venkel Ltd.

CRN10-4-1001FT

VENKEL LTD

Chip Resistor Array;CRN10;4;1K;�1%;Convex
RoHS : Compliant

10,000

CRN10-4-181JT

VENKEL LTD

Chip Resistor Array;CRN10;4;180R;�5%;Convex
RoHS : Compliant

10,000

CR0805-8W-6041DT

VENKEL LTD

Chip Resistor;0805;1/8W;6.04K;�0.5%
RoHS : Compliant

CRN10-4-150JT

VENKEL LTD

Chip Resistor Array;CRN10;4;15R;�5%;Convex
RoHS : Compliant

MELFC0207-VE-6041CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;6.04K;�0.25%
RoHS : Compliant

MELFC0207-VZ-6041DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;6.04K;�0.5%
RoHS : Compliant

HPTF1210-UC-6041DT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;6.04K;�0.5%
RoHS : Compliant

MELFC0204-ZZ-6041FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;6.04K;�1%
RoHS : Compliant

MELFM0207-VE-6041DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;6.04K;�0.5%
RoHS : Not Compliant

TFCR0402-16W-C-6041DT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;6.04K;�0.5%
RoHS : Compliant

TFCR0603-16W-E-1041FT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;1.04K;�1%
RoHS : Compliant

TFCR0603-16W-E-6041DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;6.04K;�0.5%
RoHS : Compliant

TFCR0805-10W-K-6041BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;6.04K;�0.1%
RoHS : Compliant

TFCR0805-8W-E-1041CT

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;1.04K;�0.25%
RoHS : Compliant

HPTF0603-SE-6041BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;6.04K;�0.1%
RoHS : Compliant

Vyrian

LTC4041IUFD-TRPBF

Analog Devices Inc

9,374

399400416

Molex

Barrier Strip Terminal Block, 10A, 2.5mm2, 2 Row(s), 2 Deck(s)
RoHS : Compliant

8,028

F280041PZQ

Texas Instruments

Microcontroller, 32-Bit, FLASH, TMS320 CPU, 100MHz, CMOS, PQFP100

7,623

DT04-12PD-BE02

TE Connectivity

Combination Line Connector, 12 Contact(s), Male, Crimp Terminal, Receptacle
RoHS : Compliant

6,832

F280041PZQR

Texas Instruments

Microcontroller, 32-Bit, FLASH, C28X CPU, 100MHz, CMOS, PQFP100
RoHS : Compliant

6,464

37001600410

Littelfuse Inc

Electric Fuse, Fast Blow, 0.16A, 250VAC, 35A (IR), Through Hole, TR5
RoHS : Compliant

6,414

104124-HMC336MS8G

Analog Devices Inc

5,815

VNN1NV0413TR

STMicroelectronics

Buffer/Inverter Based Peripheral Driver, 1 Driver, 1.7A, MOS, PDSO4
RoHS : Compliant

4,465

T4140412041-000

TE Connectivity

Circular Connector, 4 Contact(s), Brass, Male, Solder Terminal, Plug
RoHS : Compliant

3,912

5962P8670411VPA

Texas Instruments

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, CDIP8
RoHS : Not Compliant

3,503

7004-17041-2934000

Murrelektronik

Circular Connector

870

1051016:0411

Phoenix Contact

Terminal Block Accessory

835

0804183:0041

Phoenix Contact

Terminal Block Accessory, Marking Item
RoHS : Compliant

769

S40410081B1B1I003

Cypress Semiconductor

Flash, 8GX8, PBGA153
RoHS : Compliant

690

410-41-270-41-105000

Mill-max Mfg

Board Connector

321

Waytek, Inc.

19196-0041

Molex

16-14 GA # 10 Standard Spade Nylon Terminal Extra Sleeve BRASS SUPPORT SLEEVE

100 : $0.1772
200 : $0.1337
500 : $0.1285
1,000 : $0.1241

14,139

19137-0041

Molex

12-10 GA # 10 Block Spade Terminal Nylon Extra Sleeve BRASS SUPPORT SLEEVE

50 : $0.3425
200 : $0.3245
500 : $0.302
1,000 : $0.29

13,505

10041MT

Hillsdale Terminal & Tool Inc

Non-Insulated 22-18 Ga, Ring Terminal, 1/4" Stud, Reel (2,000 pcs = 1 Reel)

2,000 : $0.0829
10,000 : $0.0756

2,000

0411-204-1605

TE Connectivity / Deutsch

Deutsch Contact Size 16 REMOVAL TOOL 18-16 GA WIRE 0411-204-1605 - USE PN 609

1 : $1.93
10 : $1.7563

1,286

AT04-12PC-SR2GN

Amphenol Sine Systems

AT Series 12 Position Pin Receptacle Key Position C, disc way, no repl

1 : $4.81
10 : $4.55
20 : $4.24
50 : $3.97
100 : $3.69
200 : $3.49

992

ATHD04-1-8P

Amphenol Sine Systems

Amphenol Sine Systems ATHD04-1-8P ATHD receptacle is a 1-position, size 8 power connector. This sealed thermoplastic housing uses ATHD contacts, supports field-installable heavy-duty power connections, and operates from -67F (-55C) to 257F (125C).

3 : $2.5214
10 : $2.4269
50 : $2.3481
100 : $2.222
200 : $2.1432
500 : $2.0643

740

AT04-12PA-P030

Amphenol Sine Systems

Amphenol Sine Systems AT04-12PA-P030 AT Series bussed receptacle is a 12-way, keyed A gray connector with contacts included. It uses four 3-pin busbars rated 13A each, nickel plating, and a sealed thermoplastic housing for Deutsch DT-compatible circuits.

1 : $10.63
10 : $9.75
50 : $9.3
100 : $9.05
200 : $8.86
500 : $8.68

598

AHDP04-18-06SN-SRAC0

Amphenol Sine Systems

Amphenol Sine Systems AHDP04-18-06SN-SRAC030 DuraMate AHDP receptacle is a shell size 18, 6-position socket circular connector with normal diameter seal and smooth ring adapter C030 variant. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation.

1 : $7.52
10 : $7.27
50 : $6.98
100 : $6.49
200 : $6.34
500 : $6.11

549

3901-2041

Molex

4 Pin Panel Mount Plug Mini Fit JR MOLEX PN 39012041

25 : $0.8298
50 : $0.8098
100 : $0.7797
200 : $0.7698
500 : $0.7498
1,000 : $0.7398

409

AT04-12PA-SRBLK

Amphenol Sine Systems

Amphenol Sine Systems AT04-12PA-SRBLK AT Series connector receptacle is a black 12-way Deutsch DT-compatible receptacle with a strain relief end cap and standard seal. The integral design protects wire seals, reduces rear-seal stress, and helps maintain IP67 protection in harness assemblies.

1 : $3.97
10 : $3.43
50 : $3.35
100 : $3.28
200 : $3.22
500 : $3.14

265

AT04-12PA-SRGRY

Amphenol Sine Systems

Amphenol Sine Systems AT04-12PA-SRGRY AT Series connector receptacle is a gray 12-way Deutsch DT-compatible receptacle with a strain relief end cap and standard seal. The integral design protects wire seals, reduces rear-seal stress, and helps maintain IP67 protection in harness assemblies.

1 : $4.07
10 : $3.74
50 : $3.4
100 : $3.24
200 : $3.07
500 : $3.03

217

ATHD041-4PBM14-AT12P

Amphenol Sine Systems

25 POS Power CAN Bus Splitter Control Module,1 Pinx1 and 12 Pin Device Layout, 100A, BLK

1 : $30.6476
5 : $28.845
10 : $28.0261
50 : $26.7145
100 : $25.4029

116

ATHD041-4PBM14-ATP06

Amphenol Sine Systems

13 POS Power Splitter Control Module,1 Pinx1 and 6 Pin Device Layout, 100 A

1 : $40.7825
5 : $38.3835
10 : $37.293
50 : $35.5483
100 : $33.8036

282404-1