050-2016-R Price, Distributor, Stock

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 2.2-5 Male to 4.3-10 Male Low PIM Cable Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 4.3-10 male low PIM cable using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 4.3-10 male low PIM cable using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 4.3-10 cable is a male to male coax assembly, PE3C8050, can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 4.3-10 plug cable assembly PE3C8050 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8050 can also be used in the other direction and will be 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 4.3-10 male low PIM cable using 1/4 inch superflexible coax.

146

PE3M0050-72

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 72 inches. MIL-DTL-17 N Female Bulkhead to TNC Male Cable 72 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to TNC male cable 72 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to TNC male cable 72 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/03-0503 type N to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0050-72, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 N type jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/26-0011 TNC plug cable assembly PE3M0050-72 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0050-72 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to TNC male cable 72 inch length using M17/84-RG223 coax.

1 : $408.99
25 : $388.54
50 : $368.09

PE3W05050

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax. PE3W05050 is a SMA male right angle to SMA male right angle cable using RG55 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W05050 SMA male right angle to SMA male right angle cable assembly is constructed with RG55 coax.

PE3W05050/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. 7/16 DIN Female to 7/16 DIN Female Cable Using 1/2 inch Superflexible Coax with HeatShrink., Pasternack’s PE3W05050/BK/HS 7/16 DIN female to 7/16 DIN female RF cable assembly using 1/2" superflexible coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN female to 7/16 DIN female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assembly has a female gender on end 1 and a female on end 2. PE3W05050/BK/HS can also be known as a 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1.18-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05050/BK/HS RF cable has a PE jacket of 0.519-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our 7/16 DIN female to 7/16 DIN female cable has a maximum VSWR of 1.21:1. This PE3W05050/BK/HS 7/16 DIN jack to 7/16 DIN jack cable assembly is built with 1/2" superflexible, which is a corrugated coax type. The Pasternack corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This 7/16 DIN jack to 7/16 DIN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN RF cable assembly as per your requirements.

PE3W05050/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax with HeatShrink. PE3W05050/HS is a SMA male right angle to SMA male right angle cable using RG55 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W05050/HS SMA male right angle to SMA male right angle cable assembly is constructed with RG55 coax.

PE3W05050LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax, LF Solder. PE3W05050LF is a SMA male right angle to SMA male right angle cable using RG55 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W05050LF SMA male right angle to SMA male right angle cable assembly is constructed with RG55 coax.

PE3C8050-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 2.2-5 Male to 4.3-10 Male Low PIM Cable 50 CM Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 4.3-10 cable is a male to male coax assembly, PE3C8050-50CM, can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 4.3-10 plug cable assembly PE3C8050-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8050-50CM can also be used in the other direction and will be 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 4.3-10 male low PIM cable 50 cm length using 1/4 inch superflexible coax.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W00506LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using PE-SR402FL Coax with HeatShrink, LF Solder. PE3W00506LF/HS is a N male right angle to N male cable using PE-SR402FL coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W00506LF/HS N male right angle to N male cable assembly is constructed with PE-SR402FL coax.

PE3W02050

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Right Angle Low Loss Cable Using LMR-195 Coax., Radio frequency assembly SMA male to TNC male right angle low loss cable using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02050 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W02050 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02050 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle low loss cable using LMR-195 coax.

PE3W05020LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Female 4 Hole Flange to BNC Male Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3W05020LF/HS is a BNC female 4 hole flange to BNC male cable using RG316-DS coax. This Pasternack BNC female 4 hole flange to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC 4 hole flange to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05020LF/HS BNC female 4 hole flange to BNC male cable assembly is constructed with RG316-DS coax.

PE3W05042/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/2FAC, RF Cable Type: 1/2" Flexible, RF Cable Impedance: 50 Ohm. N Female to 7/16 DIN Male Cable Using 1/2 inch Flexible Coax with HeatShrink., Pasternack’s PE3W05042/BK/HS type N female to 7/16 DIN male RF cable assembly using 1/2" flexible coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N female to 7/16 DIN male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assembly has a female gender on end 1 and a male on end 2. PE3W05042/BK/HS can also be known as a type N jack to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4.72-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05042/BK/HS RF cable has a PE jacket of 0.629-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 88% and a minimum RF shielding of 120 dB. Our type N female to 7/16 DIN male cable has a maximum VSWR of 1.21:1. This PE3W05042/BK/HS type N jack to 7/16 DIN plug cable assembly is built with 1/2" flexible, which is a corrugated coax type. The Pasternack corrugated type N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05042/BK/HS can also be used in the other direction and will be a 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. This type N jack to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN RF cable assembly as per your requirements.

PE3W05051LF/BK/HS

Pasternack Enterprises

PE3W05054/TN/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity TNC Male Cable Using RG316-DS Coax with HeatShrink., Pasternack’s PE3W05054/TN/HS SMA male to TNC male RF cable assembly using RG316-DS coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05054/TN/HS can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05054/TN/HS RF cable has an FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. This PE3W05054/TN/HS SMA plug to reverse polarity TNC plug cable assembly is built with RG316-DS, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05054/TN/HS can also be used in the other direction and will be a reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. This SMA plug to TNC reverse polarity plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC RF cable assembly as per your requirements.

PE3W05066/BK/HS

Pasternack Enterprises

PE3W05091/BK/HS

Pasternack Enterprises

Teledyne HiRel

5962-8680503QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8680506XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 120 NS ACCESS TIME
RoHS : Not Compliant

M38510/50803B3A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

M38510/50802BLA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 25 NS
RoHS : Not Compliant

5962-8680504XC

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME

5962-8680501QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 300 NS ACCESS TIME
RoHS : Not Compliant

5962-8680504XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-8680504QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-8680507XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8870501LA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/50802B3A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 25 NS
RoHS : Not Compliant

CD4050BMJ//883

Teledyne HiRel

HEX NON-INVERTING BUFFER

M38510/50801BLA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 30 NS
RoHS : Not Compliant

M38510/50803BKA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

M38510/30501BAA

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

Venkel Ltd.

TA050TCR475KDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;4.7uF;10%;D;500mohm
RoHS : Compliant

TA050TCR685MDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;6.8uF;20%;D;500mohm
RoHS : Compliant

TA050TCR685KDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;6.8uF;10%;D;500mohm
RoHS : Compliant

TA050TCR106MER0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;20%;E;500mohm
RoHS : Compliant

TA050TCR106KER0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;10%;E;500mohm
RoHS : Compliant

TA050TCR106KDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;10%;D;500mohm
RoHS : Compliant

TA050TCR106MDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;10uF;20%;D;500mohm
RoHS : Compliant

TA050TCR475MDR0500

VENKEL LTD

Tantalum Chip Capacitor;50V;TCR;4.7uF;20%;D;500mohm
RoHS : Compliant

PWCR0805-BK-1050FT

VENKEL LTD

Pulse Withstanding CR;0805;2/5W;�100PPM;105R;�1%
RoHS : Compliant

HPTF1206-TN-1050AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;105R;�0.05%
RoHS : Compliant

HPTF1206-UE-2050DT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;205R;�0.5%
RoHS : Compliant

HPTF2010-UC-2050DT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;205R;�0.5%
RoHS : Compliant

HPTF2512-WC-1050BT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�50PPM;105R;�0.1%
RoHS : Compliant

MEHF0207-VC-2050GT

VENKEL LTD

High Frequency MELF;0207;1/2W;�50PPM;205R�2%
RoHS : Not Compliant

MELFC0102-RC-2050FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;205R;�1%
RoHS : Compliant

Waytek, Inc.

T50R9C2 112-05019

HellermannTyton

HellermannTyton T50R9C22 standard cable tie is a self-locking nylon tie with a 7.9" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.0743
200 : $0.0674
500 : $0.0601
1,000 : $0.0547
5,000 : $0.052

25,200

19205-0006

Molex

6 GA Parallel Connectors Non-Insulated Brazed
RoHS : Compliant

20 : $0.534
50 : $0.4749
100 : $0.4319
200 : $0.4176
500 : $0.4033
1,000 : $0.3871

16,557

F6W0.50BK

Techflex Inc

Techflex F6W0.50BK F6 Woven Wrap Wire Harness Wrap is black 1/2" sleeving on a 75' spool. It offers easy wrap-around installation, engineered overlap for full wire coverage, and improved flexibility with added abrasion resistance for harness assemblies.

75 : $1.1305
375 : $1.02

975

5550500BK00R3

ShawCor Ltd

DSG-Canusa 5550500BK00R3 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .500" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $2.0408
1,000 : $1.8686

400

875-S1-050-2

Surface Mount High Amp Circuit Breaker, Type III, On-Off, 50 Amps, 48VDC

1 : $52.84
50 : $49.78
100 : $48.11
200 : $45.89
500 : $43.66

224

184050F-01-1

Eaton Electronics

50 Amp Manual Reset Hi-Amp Surface Mount Circuit Breaker Like CB184F-50

1 : $36.82
5 : $32.82
10 : $30.74
50 : $29.0
100 : $27.61
200 : $26.22

207

4200500CL0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is clear tubing with a .500" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

5 : $3.3359
10 : $2.8819
50 : $2.6055
100 : $2.3983
500 : $2.27

171

1648-009-050-15

50A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $15.43
10 : $13.27
50 : $12.08
100 : $11.75
200 : $11.36
500 : $11.09

101

875-P1-050-2

Panel Mount High Amp Circuit Breaker, Type III, On-Off, 50 Amps, 48VDC

1 : $41.43
50 : $39.77
100 : $38.1
200 : $36.71
500 : $35.6

NPG-050-RT

Thomas & Betts

Removal Tool for Quick Connect Fittings w/1/2" NPT Thread

1 : $4.16
50 : $3.92
100 : $3.72
200 : $3.66
500 : $3.6

187050F-03-1

Eaton Electronics

50A Marine Circuit Breaker Surface Mount 187050F-03-1 ABYC E-11, CE, SAE J1171

1 : $52.13
5 : $49.19
10 : $47.14
20 : $45.68
50 : $44.5
100 : $43.04

892-1251-210-50

Trombetta

12V Isolated DC Contactor Intermittent Duty

1 : $9.18
10 : $8.28
50 : $7.61
100 : $7.33
200 : $7.1
500 : $6.92

181050F-01-1

Eaton Electronics

50 Amp Auto Reset Hi Amp Surface Mount Circuit Breaker

1 : $28.76
5 : $25.76
10 : $24.04
50 : $22.75
100 : $21.61
200 : $20.46

5550500RD00R3

ShawCor Ltd

DSG-Canusa 5550500RD00R3 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .500" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $1.9623
1,000 : $1.7965

285050F-121-S

Eaton Electronics

50A Bussmann Circuit Breaker 285050F-121-S Surface Type III TYPE III M6

1 : $35.3
5 : $33.06
10 : $30.52
50 : $27.82
100 : $25.6
200 : $24.17