08480800ACNUMNFZCWC Price, Distributor, Stock

Key Specifications, Connector 1 Series: SMB Positive Snap, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: SMB Positive Snap, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm SMB Positive Snap Plug to 75 Ohm SMB Positive Snap Plug Cable 24 Inch Length Using 75 Ohm RG187 Coax, LF Solder., Radio frequency assembly 75 Ohm SMB positive snap plug to 75 Ohm SMB positive snap plug cable 24 inch length using 75 Ohm RG187 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB positive snap plug to 75 Ohm SMB positive snap plug cable 24 inch length using 75 Ohm RG187 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB positive snap to SMB positive snap cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB positive snap cable connection on one end and a SMB positive snap cable connection on the other. Our SMB positive snap to SMB positive snap cable assembly has a plug gender on end 1 and a plug on end 2. PE3W08428LF-24 can also be known as a SMB positive snap male to SMB positive snap male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W08428LF-24 RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. SMB positive snap male to SMB positive snap male cable assembly PE3W08428LF-24 is built with RG187 which is a flexible coax type. The Pasternack flexible SMB Positive Snap cable assembly is manufactured with SMB positive snap to SMB positive snap cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMB positive snap male to SMB positive snap male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB positive snap to SMB positive snap cable assembly for quick shipment worldwide. Variations of SMB positive snap cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB Positive Snap to SMB Positive Snap RF cable assembly as per your requirements.

1 : $77.99
10 : $76.43
25 : $74.87
100 : $73.31

PE3W08482-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. Fire Rated 4.1/9.5 Mini DIN Female Bulkhead to 4.3-10 Female 4 Hole Flange Low Pim Cable 200 Cm Length Using SPF-250 Coax., Radio frequency assembly fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN bulkhead cable connection on one end and 4.3-10 4 hole flange cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and female on end 2. PE3W08482-200CM can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 jack cable assembly PE3W08482-200CM is built with SPF-250 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08482-200CM can also be used in the other direction and will be 4.3-10 female 4 hole flange to 4.1/9.5 mini DIN female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack bulkhead to 4.3-10 jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.1/9.5 mini DIN female bulkhead to 4.3-10 female 4 hole flange low pim cable 200 cm length using SPF-250 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3C10844-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10844-18 non-magnetic SMA male to SMA male RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10844-18 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10844-18 SMA plug to SMA plug cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements.

1 : $192.71
25 : $183.07
50 : $173.44
100 : $165.73

PE3C10845-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMA Male Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10845-6 non-magnetic 2.92mm male to SMA male RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and an SMA cable connection on the other. Our 2.92mm to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10845-6 can also be known as a non-magnetic 2.92mm plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10845-6 2.92mm plug to SMA plug cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10845-6 can also be used in the other direction and will be an SMA male to 2.92mm male cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMA non-magnetic RF cable assembly as per your requirements.

1 : $182.32
25 : $173.2
50 : $164.09
100 : $156.8

PE3C0848LF-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 60 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 60 inch length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C0848LF-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C0848LF-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 60 inch length using LMR-400 coax, LF solder.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE3C10840

Pasternack Enterprises

PE3C2008-40

Pasternack Enterprises

1 : $45.39
25 : $43.12
50 : $40.85
100 : $39.04

PE3W00841

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to MMCX Plug Right Angle Cable Using PE-SR405AL Coax. PE3W00841 is a reverse polarity SMA female bulkhead to MMCX plug right angle cable using PE-SR405AL coax. This Pasternack reverse polarity SMA female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. SMA to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female SMA bulkhead to plug MMCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00841 SMA reverse polarity female bulkhead to MMCX plug right angle cable assembly is constructed with PE-SR405AL coax.

PE3W08414LF/HS

Pasternack Enterprises

PE3W08416/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Male Right Angle Cable Using RG400 Coax with HeatShrink. PE3W08416/HS is a SMA female to reverse polarity SMA male right angle cable using RG400 coax. This Pasternack SMA female to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08416/HS SMA female to SMA reverse polarity male right angle cable assembly is constructed with RG400 coax.

PE3W08449LF/HS

Pasternack Enterprises

PE3W16084LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Jack to Reverse Polarity TNC Female Bulkhead Cable Using RG316 Coax with HeatShrink, LF Solder. PE3W16084LF/HS is a MMCX jack to reverse polarity TNC female bulkhead cable using RG316 coax. This Pasternack MMCX jack to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. Our jack MMCX to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16084LF/HS MMCX jack to TNC reverse polarity female bulkhead cable assembly is constructed with RG316 coax.

PE3W20849

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Female Cable Using PE-P086HF Coax. PE3W20849 is a TNC female bulkhead to SMA female cable using PE-P086HF coax. This Pasternack TNC female bulkhead to SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC bulkhead to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20849 TNC female bulkhead to SMA female cable assembly is constructed with PE-P086HF coax.

PE3C10849-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to SMP Female Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10849-12 non-magnetic 2.92mm male to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and an SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10849-12 can also be known as a non-magnetic 2.92mm plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10849-12 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10849-12 can also be used in the other direction and will be an SMP female to 2.92mm male cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements.

1 : $207.01
25 : $196.66
50 : $186.31
100 : $178.03

PE3W00840

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm SMB Plug Right Angle Cable Using 75 Ohm RG187 Coax. PE3W00840 is a F male to SMB plug right angle cable using RG187 coax. This Pasternack F male to SMB plug right angle cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm SMB for connector 2. F to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male F to plug SMB right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W00840 F male to SMB plug right angle cable assembly is constructed with RG187 coax.

TE Connectivity

2480843-1

TE Connectivity

USB C Charge-only,6 Pin, Mid, 3u GF USB Type: C Connector Profile: Standard USB Version: 2.0 Connector & Housing Type: Receptacle Number of Positions: 6 C Standard 2.0 Receptacle | Usb Connector | Part Number: 2480843-1 | Internal Number: 2480843-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.72
500 : $1.0
250 : $1.05
100 : $1.13
50 : $1.19
25 : $1.24
10 : $1.33
1 : $1.56

14,188

2834084-1

TE Connectivity

2.50MM TOP ENTRY MSC 2P_GY Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .098 in Centerline (Pitch): 2.5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .098" | Part Number: 2834084-1 | Internal Number: 2834084-1 | .098" | TE Connectivity
RoHS : Compliant

5,000 : $0.48
2,500 : $0.49
1,000 : $0.5
500 : $0.51
250 : $0.52
100 : $0.53
50 : $0.55
25 : $0.56
10 : $0.57
1 : $0.58

6,658

084289-000

TE Connectivity

B-106-1502 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.5 – 2.5 mm² Stud Size: #10 Stud Diameter: .209 in Closed Ring Tongue Terminal 16 – 14 AWG 1.5 – 2.5 mm² #10 | Ring Terminal | Part Number: 084289-000 | Internal Number: 084289-000 | Alias Number: 9-1190622-3 | .209" | TE Connectivity
RoHS : Compliant

1 : $0.91

4,753

3-641208-4

TE Connectivity

04P MTA156 HDR ASSY FL ST 30AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 3-641208-4 | Internal Number: 3-641208-4 | TE Connectivity
RoHS : Compliant

1,000 : $1.34
100 : $1.8
10 : $2.21
1 : $2.8

2,446

2842508-4

TE Connectivity

4P TB HDR VT (180) w/ Flg 3.81, GN Number of Positions: 4 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .15 in Centerline (Pitch): 3.81 mm Push-In PCB Terminal Blocks: Time Saving Connector | 4 Header Wire-to-Board .15" | Part Number: 2842508-4 | Internal Number: 2842508-4 | .15" | TE Connectivity
RoHS : Compliant

10,000 : $1.14
5,000 : $1.16
2,500 : $1.19
1,000 : $1.21
500 : $1.24
250 : $1.26
100 : $1.29
50 : $1.31
25 : $1.34
10 : $1.36
1 : $1.39

1,178

650408-4

TE Connectivity

064 EURO TYPE C RECEPT ST ASSY Eurocard Connector | Part Number: 650408-4 | Internal Number: 650408-4 | TE Connectivity
RoHS : Compliant

1,000 : $5.16
500 : $5.31
250 : $5.47
100 : $5.65
50 : $5.82
1 : $6.38

379

4-641208-4

TE Connectivity

14P MTA156 HDR ASSY FL ST LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 14 | PCB Header & Receptacle | Part Number: 4-641208-4 | Internal Number: 4-641208-4 | TE Connectivity
RoHS : Compliant

1,000 : $5.41
100 : $6.71
25 : $7.09
10 : $8.21
1 : $9.14

218

2342084-5

TE Connectivity

5POS HDR ST, HT, 5.08MM PITCH, TL 2.6MM Number of Positions: 5 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 5 Header Wire-to-Board .2" | Part Number: 2342084-5 | Internal Number: 2342084-5 | .2" | TE Connectivity
RoHS : Compliant

10,000 : $12.17
5,000 : $12.44
2,500 : $12.71
1,000 : $12.98
500 : $13.25
250 : $13.52
100 : $13.79
50 : $14.06
25 : $14.33
10 : $14.6
1 : $14.87

144

6450843-6

TE Connectivity

MBXLE R/A HEADER 7ACP PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Co-Planar Perpendicular Number of Positions: 7 PCB Mount Header Right Angle Board-to-Board Co-Planar | PCB Header & Receptacle | Part Number: 6450843-6 | Internal Number: 6450843-6 | TE Connectivity
RoHS : Compliant

1,000 : $9.09
500 : $9.35
250 : $9.64
100 : $9.96
50 : $10.25
1 : $11.25

5530841-2

TE Connectivity

CONN SEC II 15 POS 100C/L Connector System: Board-to-Board Number of Positions: 30 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 3 A Board-to-Board 30 2.54 mm .1" | Card Edge Power Connector | Part Number: 5530841-2 | Internal Number: 5530841-2 | TE Connectivity
RoHS : Compliant

1,000 : $3.28
500 : $3.37
250 : $3.48
100 : $3.59
50 : $3.7
1 : $4.06

208470-3

TE Connectivity

CMC PLUG ASSEMBLY,SZ 28 Number of Positions: 37 Connector Product Type: Housing Operating Voltage: 600 VDC Wire Size: 30 – 14 AWG Wire Size: .05 – .2 mm² Circular Power Connector | 37 Housing 600 VDC 30 – 14 AWG | Part Number: 208470-3 | Internal Number: 208470-3 | TE Connectivity
RoHS : Compliant

1 : $369.15

208486-1

TE Connectivity

CMC PLUG ASSEMBLY,SZ 22 Number of Positions: 14 Connector Product Type: Housing Operating Voltage: 600 VDC Wire Size: 30 – 14 AWG Wire Size: .05 – .2 mm² Circular Power Connector | 14 Housing 600 VDC 30 – 14 AWG | Part Number: 208486-1 | Internal Number: 208486-1 | TE Connectivity
RoHS : Compliant

50 : $133.52
25 : $141.38
10 : $149.23
1 : $157.08

208481-1

TE Connectivity

CMC RECPT ASSEMBLY SIZE 28 Number of Positions: 22 Connector Product Type: Housing Operating Voltage: 600 VDC Wire Size: 10 – 16 AWG Connector System: Wire-to-Panel Circular Power Connector | 22 Housing 600 VDC 10 – 16 AWG | Part Number: 208481-1 | Internal Number: 208481-1 | TE Connectivity
RoHS : Compliant

50 : $133.51
25 : $141.37
10 : $149.22
1 : $157.08

2390840-2

TE Connectivity

PIN, DIA8.0 CONTACT ASSY_120mm2 with Ag Terminal Type: Pin Sealable: No Mating Pin Diameter: 8 mm Mating Pin Diameter: .315 in Product Terminates To: Wire Pin 8 mm .315" | Automotive Terminal | Part Number: 2390840-2 | Internal Number: 2390840-2 | TE Connectivity
RoHS : Compliant

1 : $25.55

1-2342084-6

TE Connectivity

16POS HDR ST, HT, 5.08MM PITCH, TL 2.6MM Number of Positions: 16 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 16 Header Wire-to-Board .2" | Part Number: 1-2342084-6 | Internal Number: 1-2342084-6 | .2" | TE Connectivity
RoHS : Compliant

2,500 : $52.22
1,000 : $53.63
500 : $55.04
250 : $56.46
100 : $57.87
50 : $59.28
25 : $60.69
10 : $62.1
1 : $63.51

Venkel Ltd.

LMCI1608-47NKT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;47nH;�10%
RoHS : Compliant

TFCR1206-8W-K-2084BT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;2.08M;�0.1%
RoHS : Compliant

TFCR1210-4W-E-2084CT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�25PPM;2.08M;�0.25%
RoHS : Compliant

TFCR2512-2W-E-2084FT

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;2.08M;�1%
RoHS : Compliant

TFCR1206-8W-E-2084DT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;2.08M;�0.5%
RoHS : Compliant

TFCR1206-8W-K-2084CT

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;2.08M;�0.25%
RoHS : Compliant

TFCR1206-8W-E-2084CT

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;2.08M;�0.25%
RoHS : Compliant

TFCR1210-4W-K-2084BT

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2.08M;�0.1%
RoHS : Compliant

TFCR1210-4W-K-2084CT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2.08M;�0.25%
RoHS : Compliant

TFCR1206-8W-E-2084FT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�25PPM;2.08M;�1%
RoHS : Compliant

TFCR1210-4W-K-2084DT

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2.08M;�0.5%
RoHS : Compliant

TFCR2512-2W-K-2084CT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;2.08M;�0.25%
RoHS : Compliant

LMCI1608-47NJT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;47nH;�5%
RoHS : Compliant

TFCR2512-2W-K-2084BT

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;2.08M;�0.1%
RoHS : Compliant

MLF1608-4R7MT

VENKEL LTD

Multilayer Chip Inductor;0603;4.7uH;�20%
RoHS : Compliant

Vyrian

TBJC106K025LRLC0845

KYOCERA AVX

Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 10% +Tol, 10% -Tol, 10uF, Surface Mount, 2312

15,520

LS1084AXN7PTA

NXP Semiconductors

CMOS, PBGA780
RoHS : Compliant

12,942

MAX16084XS16H-T

Analog Devices (Maxim Integrated)

12,114

LTC6084HMS8

Analog Devices Inc

Operational Amplifier, 2 Func, 1100uV Offset-Max, CMOS, PDSO8
RoHS : Not Compliant

11,567

MAX20084ATEA-VY+T

Analog Devices (Maxim Integrated)

10,844

M80-8410845

Harwin PLC

Board Connector, 8 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug

8,569

LT1084CT-PBF

Analog Devices Inc

8,513

TPC1020BFN-084C2

Texas Instruments

Field Programmable Gate Array, 547-Cell, CMOS, PQCC84
RoHS : Not Compliant

5,423

TPC1020BFN-084I

Texas Instruments

Field Programmable Gate Array, 547-Cell, CMOS, PQCC84
RoHS : Not Compliant

5,024

MAX16084AUS

Analog Devices (Maxim Integrated)

4,945

TL084MFK/883B

Texas Instruments

Operational Amplifier, 4 Func, 15000uV Offset-Max, CQCC20
RoHS : Not Compliant

4,397

5962-9084701MTX

Texas Instruments

Fast Page DRAM, 1MX4, 120ns, CMOS, CDSO20

4,300

TL084MJ883B

Texas Instruments

Operational Amplifier, 4 Func, 0uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant

3,688

SC900844JVK

NXP Semiconductors

Power Supply Management Circuit, Adjustable, 20 Channel, PBGA338

2,998

MAX3084CSAT

Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
RoHS : Not Compliant

662

08480800ACNUMNFZCWC Distributor

Link URL