| Electronic Components Datasheet Search |
|
102-6-RV Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Newark | 102R15W102KV4E![]() | Johanson Dielectrics Inc | Cap, 1000Pf, 1 Kv, 10%, X7R, 0805; |Johanson Dielectrics 102R15W102KV4E RoHS : Compliant |
| 18,420 | |
102R15W102KV4E![]() | Johanson Dielectrics Inc | Cap, 1000Pf, 1 Kv, 10%, X7R, 0805; |Johanson Dielectrics 102R15W102KV4E RoHS : Compliant |
| 18,420 | ||
| 37102 010250 | Belden Inc | #2 Str Epdm 150C 600V; |Belden 37102 010250 RoHS : Compliant |
| 500 | ||
| 1658-G21-02-P10-20A | E-T-A | Circuit Breaker, 20A; |Eta 1658-G21-02-P10-20A RoHS : Compliant |
| 322 | ||
| 17 24 110 2102 | HARTING Technology Group | Connector, Type B, Female, 110Way; |Harting 17 24 110 2102 RoHS : Compliant |
| 91 | ||
| 102 | Abbatron | Banana Plug, 15A, Stud; Gender:Plug; Connector Mounting:Panel Mount; Current Rating:15A; Voltage Rating:1Kv; Contact Plating:Nickel Plated Contacts; Connector Colour:-; Contact Material:Beryllium Copper; Contact Termination Type:Studrohs Compliant: Yes RoHS : Compliant |
| 31 | ||
| 102010228 | Seeed Development Ltd | Dev Board, 32Bit, Arm Cortex M0+; |Seeed Studio 102010228 RoHS : Compliant |
| 19 | ||
| 102 | Antex (Electronics) Limited | Tip, Sloped, 2.3Mm; |Antex 102 RoHS : Not Compliant |
| 16 | ||
| 102 | Peltec Timers & Controls | Timer, Spdt, 0.1S To 100Days, 240V; Product Range:100 Series; Timer Functions:Repeat Cycle; Time Min:0.1S; Time Max:100Days; No. Of Timing Ranges:2Ranges; Timer Output:1 Changeover Relay; Supply Voltage Max:240Vac |Peltec 102 RoHS : Not Compliant |
| 5 | ||
| ST110/21PC10/21PC10/12IN | HUBER+SUHNER | Rf Cable, 1Mm Jack-Jack, 50 Ohm, 305Mm; |Huber+Suhner ST110/21PC10/21PC10/12IN RoHS : Compliant |
| 3 | ||
| 102 | Platt Electric | Molded Case, Polyester; Carrying Case Material:Pe (Polyethylene); Case Color:Black; External Height - Imperial:6.5"; External Height - Metric:165.1Mm; External Width - Imperial:4.5"; External Width - Metric:114.3Mm; Product Range:- Rohs Compliant: Na RoHS : Not Compliant |
| 0 | ||
| 102 | General Tools & Instruments LLC | Measuring, Micrometers; Measuring Range Max:1"; Graduations:-; Accuracy:0.025Mm; No. Of Anvils:-; Product Range:-; Resolution:0.001" Rohs Compliant: Na |General Tools 102 RoHS : Not Compliant |
| 0 | ||
| 102 | Marathon Special Products | Marathon Special Products |Marathon Special Products 102 RoHS : Not Compliant |
| 0 | ||
| 102 | O-Z Gedney | 3/4 In Bonding Locknut; |Oz Gedney 102 RoHS : Not Compliant |
| 0 | ||
| 102 | Molex | |Molex 102 RoHS : Not Compliant |
| 0 | ||
![]() RS | EA1-B0-24-810-22A-CC (EA1B02481022ACC|EA1-B0-24-810-22A-CC|EA1B02481022ACC) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P 100A SERIES TRIP MED. DELAY STUD 600VAC/125VDC |
| 1,501 | |
| C0805C102KDRACTU (C0805C102KDRAC7800 | C0805C102KDRAC) | KEMET Corporation | CAPACITOR, CERAMIC, CAP, 1000PF, TOL 10%, SMT, 1KV, HIGH VOLTAGE |
| 930 | ||
| 534-1-1-102 (534B1102JC) | Vishay Sfernice | POTENTIOMETER WIREWOUND 1 KOHMS 10 TURNS PWR 2W SHAFT DIA 0.2497 IN 534 SERIES |
| 67 | ||
| CM1-B0-34-610-201-C (CM1B034610201C|CM1-B0-34-610-201-C|CM1B034610201C) | Carling Technologies | CIRCUIT BREAKER SEALED TOGGLE 1P SERIES TRIP DC 50/60HZ MED 10A NO LEGEND SCREW |
| 21 | ||
| 05027102001 (027102) | Wera Werk Hermann Werner GmbH & Co. KG | L-KEYS,950 PKL BM HEX-PLUS SERIES,2.0 LONG ARM BALLPOINT HEX-KEY |
| 20 | ||
| 10250T102 | Eaton Cutler-Hammer | HEAVY-DUTY PUSHBUTTON, SELECTOR, MOMENTARY, FLUSH RED, CHROMED, 10250T SERIES |
| 18 | ||
| EA3-B0-24-810-22A-DC (EA3B02481022ADC|EA3-B0-24-810-22A-DC|EA3B02481022ADC) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 3P 50/60HZ MEDIUM 100A 1/4-20 STUD DUAL LEGEND |
| 6 | ||
| AM1-B0-34-610-201-C (AM1B034610201C|AM1-B0-34-610-201-C|AM1B034610201C) | Carling Technologies | CIRCUIT BREAKER SEALED TOGGLE 1P SERIES TRIP DC 50/60HZ MED 10A SCREW NO LEGEND |
| 4 | ||
| ME1-B-94-410-2-A22-A-C (ME1B944102A22AC|ME1-B-94-410-2-A22-A-C|ME1B944102A22AC) | Carling Technologies | CIRCUIT BREAKER, M-SERIES, HYDRAULIC-MAGNETIC |
| 4 | ||
| ME1-B-94-610-2-A12-B-C (ME1B946102A12BC|ME1-B-94-610-2-A12-B-C|ME1B946102A12BC) | Carling Technologies | CIRCUIT BREAKER, M-SERIES, HYDRAULIC-MAGNETIC |
| 2 | ||
| 102 | Adafruit Industries | 4GB BLANK SD/MICROSD MEMORY CARD |
| 0 | ||
| 102 | HH Smith | BANANA PLUG UNINSULATED THREAD 6-32 LENGTH 3/8IN 15 A BRASS/NICKEL |
| 0 | ||
| 102 | HH Smith | CONN, TEST, BANANA, PLUG, SZ STANDARD, UNINSULATED, BRASS CONT MTL, NICKEL, 15A |
| 0 | ||
| 102 | Platt Luggage | BLOW MOLDED CASE, 6 1/2" X 4 1/2" X 1 11/16" |
| 0 | ||
| 102 | Platt Luggage | EQUIPMENT CASE, 102 BLOW MOLDED, SINGLE LATCH, CUBED FOAM/FLAT CUSHION |
| 0 | ||
![]() Rochester Electronics | TJA1028T/3V3/10/2Z | NXP Semiconductors | IC INTERFACE Transceiver LIN 10.4kBaud 3.234V, 4.9V - 3.366V, 5.1V 8-SOIC T/R RoHS : Compliant |
| 5,000 | |
BZB84-B10,215![]() | NXP Semiconductors | Zener Diode Array 10V 300mW SOT-23-3 T/R RoHS : Compliant |
| 763 | ||
BZB84-B10,215![]() | Nexperia | Zener Diode Array 10V 300mW SOT-23-3 T/R RoHS : Compliant |
| 91 | ||
CAT1023YI-42-GT3![]() | onsemi | Supervisory Circuit 4.25V 8-SOP T/R RoHS : Compliant |
| 4,151 | ||
MC10H102L![]() | onsemi | Logic IC NOR Gate 4 Element -5V 16-DIP Tube RoHS : Not Compliant |
| 3,235 | ||
| ESD102U102ELSE6327XTSA1 | Infineon Technologies AG | Trans Voltage Suppressor Diode, 3.3V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 63,720 | ||
| CY7C1020D-10VXI | Infineon Technologies AG | SRAM 512kbit 32k x 16 4.5V - 5.5V Parallel 10ns 44-SOJ Tube RoHS : Compliant |
| 7,075 | ||
VSP1021PFB![]() | Texas Instruments | Analog Front End 10 Bits 1 CH Serial 48-QFP Tray RoHS : Compliant |
| 5,757 | ||
CS5102A-JLZ![]() | Cirrus Logic | ADC, Successive Approximation, 16-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PQCC28 RoHS : Compliant |
| 7,200 | ||
CY7C1020D-10VXI![]() | Cypress Semiconductor | SRAM 512kbit 32k x 16 4.5V - 5.5V Parallel 10ns 44-SOJ Tube RoHS : Compliant |
| 5,907 | ||
| MIC5210-2.9BMM | Micrel Inc | Fixed Positive LDO Regulator, 2 Output, 2.9V1, 2.9V2, BIPolar, PDSO8 RoHS : Not Compliant |
| 1,840 | ||
| GAL22V10-20LVI | National Semiconductor Corporation | EE PLD, 20ns, PAL-Type, CMOS, PQCC28 RoHS : Not Compliant |
| 949 | ||
| R5F10279ANA#U5 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 12kB (12k x 8) 24MHz 24-QFN Tray RoHS : Compliant |
| 4,117 | ||
| UPD168102K9-5B4-A | Renesas Electronics Corporation | Full/Half Bridge Driver Half Bridge (6) 48-QFN RoHS : Compliant |
| 847 | ||
| LA42102HK-E | SANYO Semiconductor Co Ltd | 2ch Power Amplifier RoHS : Compliant |
| 130 | ||
![]() ComSIT USA | 102R15W102KV4E![]() | Johanson Dielectrics Inc | AVAILABLE EU RoHS : Compliant | 4,209 | ||
| MEC0224102B | KARRIE INDUSTRIAL | AVAILABLE EU | 17 | |||
| OS81110AFRD1A010207V19 | Microchip Technology Inc | AVAILABLE EU | 1,778 | |||
| TLIN1021ADDFRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 9,000 | |||
| 1023106387 | SANYO DENKI AMERICA | AVAILABLE EU | 118 | |||
08052C102K4T2A![]() | Kyocera AVX Components | AVAILABLE EU RoHS : Compliant | 122,287 | |||
CC0402KRX7R9BB102![]() | YAGEO Corporation | AVAILABLE EU RoHS : Compliant | 3,268,280 | |||
| HV1812Y102KXVATHV | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 21,918 | |||
| NPPC102KFMSRC | AVAILABLE EU | 146 | ||||
| TSU102IST | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 1,349 | |||
| 17 35 125 2102 | HARTING ELEKTRONIK | AVAILABLE EU | 158 | |||
| 210217902 | ZOLLNER | AVAILABLE EU | 19 | |||
| EKMQ251VSN102MR40S | Chemi-Con | AVAILABLE EU RoHS : Compliant | 613 | |||
| 476591102 | MOLEX INC | AVAILABLE EU | 2,280 | |||
| 4816P1102LF | Bourns Inc | AVAILABLE EU | 1,388 | |||
![]() ComSIT USA | C0603C102J3GAC7867![]() | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.001uF, Surface Mount, 0603 RoHS : Compliant | 20,000 | ||
| SH21B102K102CT | Walsin Technology Corporation | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 0805 RoHS : Compliant | 16,000 | |||
| 4608X102102LF | Bourns Inc | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1W, 1000ohm, 100V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount, 8010 RoHS : Compliant | 10,000 | |||
| FV21X102K102PXG | Prosperity Dielectrics Co Ltd | CAP CER Multilayer 1000pF X7R 1kV �10% 0805 RoHS : Compliant | 8,000 | |||
102R15W102KV4E![]() | Johanson Dielectrics Inc | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 0805 RoHS : Compliant | 3,000 | |||
| 55031024400 | Sumida Corporation | SMT CHIP INDUCTOR General Purpose Inductor, 1uH, 2%, 1 Element, Ceramic-Core, SMD, 1206 RoHS : Compliant | 2,980 | |||
| B72220S1300K102V57 | TDK Electronics | SIOV METAL OXIDE VARISTOR Varistor, 34V, 26J, Through Hole Mount RoHS : Compliant | 2,748 | |||
| CP2102GMR | Silicon Labs Isolation Inc | IC USB Bridge, USB to UART UART USB 2.0 3V - 3.6V 28-QFN T/R RoHS : Compliant | 824 | |||
| KTY82210215 | NXP Semiconductors | PTC Thermistor 2.02 kOhm SOT-23-3 T/R RoHS : Compliant | 675 | |||
| RGA102M1ESA1020 | Lelon Electronics Corp | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF RoHS : Compliant | 500 | |||
| B72220S1140K102V57 | TDK Electronics | SIOV METAL OXIDE VARISTOR Varistor, 16V, 12J, Through Hole Mount RoHS : Compliant | 250 | |||
| IS63LV1024L10TL | Integrated Silicon Solution Inc | 128K X 8 HIGH-SPEED CMOS STATIC RAM 3.3V REVOLUTIONARY PINOUT Standard SRAM, 128KX8, 10ns, CMOS, PDSO32 RoHS : Compliant | 204 | |||
| 91020102 | EOZ Secme | Electronic Component RoHS : Not Compliant | 200 | |||
| 10208ASO28 | ELMOS SEMICONDUCTOR AG | Electronic Component RoHS : Not Compliant | 55 | |||
| 3NY7102 | Siemens | - RoHS : Not Compliant | 4 | |||
![]() Interstate Connecting Components | 11028102-00 | TE Connectivity | PRESS XDCR M525M-000002-3.5BG | 0 | ||
| 801-011-02C10-200PB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-011-02C10-201FA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-011-02M10-2PD | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-011-02NF10-200PC | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-02NF10-201FB | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-02ZN10-202EB | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-02ZNU10-202EA | Glenair Inc | RoHS : Compliant | 0 | |||
| 804-066-06NF10-26AF102 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-02C10-201ED | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-011-02C10-202PB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-011-02C10-2FD | Glenair Inc | 0 | ||||
| 801-011-02C10-2SA | Glenair Inc | 0 | ||||
| 801-011-02NF10-202PC | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-02NF10-2PC | Glenair Inc | RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | CN1020A10G20S10-200 | Cinch Connectivity Solutions |
| 0 | ||
| CN1020A18S08S10-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A16G10S10-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A22A19P10-240 | Cinch Connectivity Solutions |
| 0 | |||
| 110238-1025 | ITT Interconnect Solutions |
| 0 | |||
| CN1020A10A20P10-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A10A20P10-200 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G08S10-240 | Cinch Connectivity Solutions |
| 0 | |||
| D110238-1025 | ITT Interconnect Solutions |
| 0 | |||
| CN1020A18A08S10-200 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A22G12P10-240 | Cinch Connectivity Solutions |
| 0 | |||
| VN01-025-0010-102 | Amphenol Tuchel |
| 0 | |||
| CN1020A22A12P10-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A22G19P10-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A22G12P10-240 | Cinch Connectivity Solutions |
| 0 | |||
![]() Rutronik | CR10-2401-FK | ASJ Holdings Limited | RC0402 2,4K 1% 0,063W TK100 RoHS : Compliant |
| 1,280,000 | |
CL10C102JA8NNNC![]() | Samsung Electro-Mechanics | KC 1,0nF 0603 5% 25V NP0 RoHS : Compliant |
| 816,000 | ||
| CR10-2612-FK | ASJ Holdings Limited | RC0402 26,1K 1% 0,063W TK100 RoHS : Compliant |
| 600,000 | ||
| RR0816P-102-D | Susumu Co Ltd | TF0603 1K 0,5% 0,0625W TK25 RoHS : Compliant |
| 130,000 | ||
| 510210200 | Molex | 02P RECEPTACLE HOUSING RoHS : Compliant |
| 110,000 | ||
| MCT06030D9102BP500 | Vishay Intertechnologies | TF0603 91K 0,1% 0,1W TK25 RoHS : Compliant |
| 50,000 | ||
| GRT1555C1E102JA02D | Murata Manufacturing Co Ltd | KC 1,0nF 0402 5% 25V NP0 AECQ RoHS : Compliant |
| 40,000 | ||
AC0805KRX7R0BB102![]() | YAGEO Corporation | KC 1,0nF 0805 10% 100V X7R AECQ RoHS : Compliant |
| 28,000 | ||
| RT0805DRE1020KL | YAGEO Corporation | RT0805 20K 0,5% 0,125W TK50 RoHS : Compliant |
| 20,000 | ||
GCM155R72A102KA37D![]() | Murata Manufacturing Co Ltd | KC 1,0nF 0402 10% 100V X7R AECQ RoHS : Compliant |
| 20,000 | ||
C0805C102K5RAC7800![]() | KEMET Corporation | KC 1,0nF 0805 10% 50V X7R RoHS : Compliant |
| 20,000 | ||
C0603C102K1RAC7867![]() | KEMET Corporation | KC 1,0nF 0603 10% 100V X7R RoHS : Compliant |
| 16,000 | ||
CC0603GRNPO9BN102![]() | YAGEO Corporation | KC 1,0nF 0603 2% 50V NP0 RoHS : Compliant |
| 12,000 | ||
| CR1025.SC2 | Renata Batteries | LITH 3V 30MAH Secured Card 2pcs |
| 200 | ||
| 1053131102 | Molex | 02P Nano-Fit Header 2,50MM TIN RoHS : Compliant |
| 25 | ||
![]() Component Electronics, Inc | 51021-0200 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 29,012 | |
| 0510210200 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 29,012 | ||
| LHK102M25V1020 | Jackcon Capacitor Electronics Co Ltd | IN STOCK SHIP TODAY | 6,500 | |||
| 4610X-102-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,890 | ||
| 1102-28-102-05 | Methode Electronics Inc | IN STOCK SHIP TODAY | 2,047 | |||
| 4606X-102-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,500 | ||
| 1658-G21-02-P10-20A | E-T-A | IN STOCK SHIP TODAY RoHS : Compliant |
| 225 | ||
| CESTX1C102M1020AA | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY | 150 | |||
| 4310R-102-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 119 | ||
102S41N102JV4E![]() | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant | 100 | |||
| S102C-102R50-TB | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 75 | ||
| 4306R-102-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 72 | ||
| 4608X-102-102LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 31 | ||
| 4608X-102-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 18 | ||
| 62101021021 | Wurth Elektronik | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
![]() DB Roberts | 2102-440-AL | RAF Electronic Hardware |
| 428 | ||
| 2431-1011-0226-84.00 | Tech-Etch | 19 | ||||
| 17551-02 | HeliCoil |
| 2 | |||
| SFP10241102A | Essentra Components | TAPERED PLUGSILICON NATURAL | 0 | |||
| SFP10241102C | Essentra Components | TAPERED PLUGEPDM BLACK | 0 | |||
| 47-10-210-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| E3-1020-102 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 20C102102-EU | Avdel | CORD WALL C13-EURO 250V | 0 | |||
| E5-1-021-021 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-021-020 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1219102 | Essentra Components | 0 | ||||
| 12SWS1023B | Essentra Components | SHOULDER WASHER, .260 ID, .555 | 0 | |||
| 2234-1024-S-26 | RAF Electronic Hardware | 0 | ||||
| 110240 | Essentra Components | 0 | ||||
| 10205 | Essentra Components | 0 | ||||
![]() Pasternack Enterprises US | PE3W10213-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to MMCX Jack Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMP female right angle to MMCX jack cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX jack cable 12 inch length using PE-SR405FLJ coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and MMCX cable connection on the other. Our right angle SMP to MMCX cable assemblies have a female gender on end 1 and jack on end 2. This SMP to MMCX cable is a female to jack coax assembly, PE3W10213-12, can also be known as a right angle SMP jack to MMCX female cable assembly and will be shipped same-day as it is purchased. SMP jack to MMCX female cable assembly PE3W10213-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMP right angle female to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10213-12 can also be used in the other direction and will be MMCX jack to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to MMCX jack cable 12 inch length using PE-SR405FLJ coax. |
| 1,287 | |
| PE3C10295-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to Straight Cut Lead Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C10295-100CM can also be known as a low loss SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10295-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to straight cut lead sexless cable assembly PE3C10295-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10295-100CM can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 847 | ||
| PE3FCA102-7M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM3, 2.0mm LSZH, Aqua-7M. Pasternack’s PE3FCA102-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM3 patch cable assembly is optimized for high-speed, high-bandwidth data transfer, supporting faster and longer-distance connectivity than OM1 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA102-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 231 | ||
| PE3C10282-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Male to N Male Low Loss Cable 12 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10282-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10282-12 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 202 | ||
| PE3M0310-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Female Cable 24 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0310-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0310-24 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMA pin to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0310-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements. |
| 46 | ||
| PE3C10270-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable 60 Inch Length Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable 60 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable 60 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assembly has male gender on end 1 and male on end 2. PE3C10270-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10270-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. N type plug to type N plug cable assembly PE3C10270-60 is built with LMR-400-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with N type to type N cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N and N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 11 | ||
| PE3C10246 | Pasternack Enterprises | 0 | ||||
| PE3C10256-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 48 Inch Length Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 48 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 48 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assembly has male gender on end 1 and male on end 2. PE3C10256-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10256-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. BNC plug to BNC plug cable assembly PE3C10256-48 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC and BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10261-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-24 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10291 | Pasternack Enterprises | 0 | ||||
| PE3CA1027-18 | Pasternack Enterprises |
| 0 | |||
| PE3W06102LF | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm N Male Right Angle Cable Using 75 Ohm RG11 Coax, LF Solder. PE3W06102LF is a F male to N male right angle cable using RG11 coax. This Pasternack F male to N male right angle cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm N for connector 2. F to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male F to male N right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W06102LF F male to N male right angle cable assembly is constructed with RG11 coax. | 0 | |||
| PE3W10208/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to SSMC Jack Bulkhead Cable 12 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SSMC bulkhead cable connection on the other. Our right angle MMCX to SSMC cable assemblies have a plug gender on end 1 and jack on end 2. PE3W10208/HS-12 can also be known as a right angle MMCX male to SSMC female cable assembly and will be shipped same-day as it is purchased. MMCX male to SSMC female cable assembly PE3W10208/HS-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SSMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10208/HS-12 can also be used in the other direction and will be SSMC jack bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SSMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SSMC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W10291LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SHV Plug to MHV Male Cable Using 53 Ohm RG55 Coax with HeatShrink, LF Solder. PE3W10291LF/HS is a SHV plug to MHV male cable using RG55 coax. This Pasternack SHV plug to MHV male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm MHV for connector 2. Our plug SHV to male MHV cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W10291LF/HS SHV plug to MHV male cable assembly is constructed with RG55 coax. | 0 | |||
| PE3W13102/HS | Pasternack Enterprises | 0 | ||||
![]() Teledyne HiRel | M38510/15102BDA![]() | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | ||
| M38510/20904BKA | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 8510201ZA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8766102YC | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME | 0 | |||
M38510/20902BVA![]() | Teledyne HiRel | PROM, 2K X 4, WITH 3-STATE OUTPUTS, 125 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
M38510/21002BJA![]() | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8766102XA | Teledyne HiRel | PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
8510206YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 150 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
M38510/34102BEA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| 5962-8765102JA | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 45 NS RoHS : Not Compliant | 0 | |||
M38510/28902BVA![]() | Teledyne HiRel | STATIC RAM, 1K X 4, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-89841023A | Teledyne HiRel | PROG. LOGIC DEVICE, ELECTR. ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 20 NS RoHS : Not Compliant | 0 | |||
| 5962-8765102KA | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 45 NS RoHS : Not Compliant | 0 | |||
M38510/28904BVA![]() | Teledyne HiRel | STATIC RAM, 1K X 4, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| M38510/20602BYA | Teledyne HiRel | PROM, POWER-SWITCHED, 1K X 4, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C1210C0G102-102KNE![]() | VENKEL LTD | HV Chip Capacitor;1210;C0G;1000V;1000pF;�10% RoHS : Compliant | 0 | ||
| MELFC0102-RE-5102DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;51K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-UC-1022FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;10.2K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1022BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;10.2K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-UZ-1022CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;10.2K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-YZ-1021BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;1.02K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-YZ-1102BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;11K;�0.1% RoHS : Compliant | 0 | |||
| UPTF2010-2W-N-1021AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;1.02K;�0.05% RoHS : Compliant | 0 | |||
| UPTF2010-2W-N-1102AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;11K;�0.05% RoHS : Compliant | 0 | |||
| MELFC0102-RE-1021CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;1.02K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-RE-1102CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;11K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1021FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;1.02K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1102FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;11K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-YE-2102CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;21K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-YE-9102FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;91K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | 102102-HMC141C8 | Analog Devices Inc | 11,476 | |||
| 5962L1021102VDA | Analog Devices Inc | Single-Ended Multiplexer, 2 Func, 2 Channel, CDFP14 RoHS : Not Compliant | 8,359 | |||
| 17241102102 | Harting Electronics & Kg | Board Connector, 110 Contact(s), 5 Row(s), Female, Right Angle, Press Fit Terminal | 7,405 | |||
| 5962-1022102VSX | Texas Instruments | Switching Regulator, 1100kHz Switching Freq-Max, CDFP20 | 6,410 | |||
| 102102-HMC170C8 | Analog Devices Inc | 6,268 | ||||
| XCVM1102-3MLIVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 4,141 | |||
| XCVM1102-3DSEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,982 | |||
| XCVM1102-3LLEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,706 | |||
| XCVM1102-3GSEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,642 | |||
| XCVM1102-3MSIVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,474 | |||
| XCVM1102-3HLEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,341 | |||
| XCVM1102-2GSEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,629 | |||
| XCVM1102-2LLEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 1,996 | |||
| 2220B102K102CT | Walsin Technology | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.001uF, Surface Mount, 2220 | 834 | |||
| 10250T102 | Eaton Corporation | Pushbutton Switch | 504 | |||
![]() Waytek, Inc. | 19221-0228 | Molex | 6GA Tinned Eyelet 5/16" Stud RoHS : Compliant |
| 9,554 | |
| 10102 | Hillsdale Terminal & Tool Inc | Uninsulated Ring Terminal 16-14 Gauge, 5/16" Stud |
| 6,605 | ||
| 50102 | Hillsdale Terminal & Tool Inc | Vinyl Ring Terminal 16-14 Gauge, 5/16" Stud |
| 5,531 | ||
| 50102N | Hillsdale Terminal & Tool Inc | Nylon Ring Terminal 16-14 Gauge 5/16" Stud |
| 4,720 | ||
| 7116-4151-02 | Yazaki Corp | 18-16 GA Yazaki 2.8 Female Terminal Reel |
| 3,000 | ||
| 192210231 | Molex | 4GA Tinned Eyelet 5/16" Stud RoHS : Compliant |
| 2,553 | ||
| 7116-4151-02 | Yazaki Corp | 18-16 GA Yazaki 2.8 Female Terminal Loose |
| 1,361 | ||
| 19221-0248 | Molex | 3/0 GA Tinned Eyelet 1/2" Stud RoHS : Compliant |
| 1,048 | ||
| 784-2421-020-20 | Trombetta | 24V Starter Solenoid 100A Continuous - High Performance |
| 599 | ||
| 114-1211-020-02 | Trombetta | Bear Series 12V 4 Terminal Solenoid 225 AMP Continuous |
| 316 | ||
| AT11-027-0405 | Amphenol Sine Systems | Amphenol Sine Systems AT11-027-0405 contact removal tool is a black terminal removal tool for size 4, 4 Ga. contacts. Comparable to 0411-027-0405, it is compatible with Amphenol AHDP/AHDM and Deutsch HDP/HDM connector families. |
| 244 | ||
| 15600-10-20 | Eaton Electronics | ATO / ATC Fuse Block 10 Gang No Ground |
| 96 | ||
| 533-P0-010-22 | MP | Battery Disconnect w/Circuit Breaker, 10A, 32VDC |
| 26 | ||
| SP41102 | Eaton Electronics | Sure Power SP41102 Converter VOLT CONDITIONER 10A 12V / 14V TRAIL CHARGER |
| 9 | ||
| 19221-0233 | Molex | 2GA Tinned Eyelet 5/16" Stud RoHS : Compliant |
| 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |