103-4-RV Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to SMA Male Low Loss Cable 24 Inch Length Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to SMA male low loss cable 24 inch length using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 24 inch length using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10389-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10389-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10389-24 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10389-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.

1 : $123.99
25 : $119.03
50 : $115.31
100 : $112.83

2,206

PE3CA1033

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: UMCX 2.1, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50. Reverse Polarity SMA Female Bulkhead to UMCX 2.1 Plug Cable Using 0.81mm Coax, RoHS. PE3CA1033 is a reverse polarity SMA female bulkhead to UMCX 2.1 plug cable using 0.81mm coax. This Pasternack reverse polarity SMA female bulkhead to UMCX 2.1 plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm UMCX 2.1 for connector 2. Our reverse polarity female SMA bulkhead to plug UMCX 2.1 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3CA1033 SMA reverse polarity female bulkhead to UMCX 2.1 plug cable assembly is constructed with 0.81mm coax and the maximum VSWR is 1.5:1.

PE3C10398-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male to N Female Bulkhead Low Loss Cable 60 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N female bulkhead low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N female bulkhead low loss cable 60 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10398-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10398-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N jack cable assembly PE3C10398-60 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10398-60 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $145.99
25 : $140.15
50 : $135.77
100 : $132.85

PE3C10361-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to N male low PIM cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10361-60 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10361-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10361-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10361-60 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.

1 : $221.99
25 : $213.11
50 : $206.45
100 : $202.01

PE3C10368-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 36 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 36 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low PIM cable 36 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10368-36 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10368-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10368-36 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements.

1 : $339.99
25 : $326.39
50 : $316.19
100 : $309.39

PEWCA1037

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-102, Coax Connector Impedance: 50 Ohm, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 7 GHz, Maximum Frequency: 10 GHz. WR-102 UG-1493/U Square Cover Flange to SMA Female Waveguide to Coax Adapter Operating from 7 GHz to 10 GHz. PEWCA1037 WR-102 waveguide to coax adapter is also known as a WR-102 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR102 to SMA connector and has a female gender. Our WR102 to SMA female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-102 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 7 GHz and a maximum frequency of 10 GHz. WR-102 waveguide to SMA transition adapter to coax PEWCA1037 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-102 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $1,180.0
5 : $1,132.8
10 : $1,085.6

PE3C10347-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 4.3-10 Male to N Male Low PIM Cable 48 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to N male low PIM cable 48 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to N male low PIM cable 48 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10347-48 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10347-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10347-48 is built with TCOM-240-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10347-48 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $161.99
25 : $155.51
50 : $150.65
100 : $147.41

PE3C10364

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm. N Male to N Male Low PIM Cable Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly N male to N male low PIM cable using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male low PIM cable using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10364 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10364 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10364 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

PEWCT1038

Pasternack Enterprises

1 : $2,120.0
5 : $2,035.2
10 : $1,950.4

PE3C10319

Pasternack Enterprises

PE3C10351/WP-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low PIM Cable 36 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low PIM cable 36 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10351/WP-36 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10351/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C10351/WP-36 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $231.99
25 : $220.39
50 : $208.79
100 : $199.51

PE3C10352-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable 24 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10352-24 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10352-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10352-24 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10352-24 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $185.99
25 : $178.55
50 : $172.97
100 : $169.25

PE3C10392-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male right angle to TNC male low loss cable 48 inch length using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to TNC male low loss cable 48 inch length using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle a type N to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10392-48 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10392-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to TNC plug cable assembly PE3C10392-48 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10392-48 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements.

1 : $107.99
25 : $103.67
50 : $100.43
100 : $98.27

PE3C11103/HS

Pasternack Enterprises

PE3C8110-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Water Blue FAKRA Jack Right Angle to SMA Female Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack right angle to SMA female low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack right angle to SMA female low loss cable 36 inch length using LMR-100 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle FAKRA cable connection on one end and SMA cable connection on the other. Our low loss right angle FAKRA to SMA cable assemblies have a jack gender on end 1 and female on end 2. PE3C8110-36 can also be known as a low loss right angle FAKRA female to SMA jack cable assembly and will be shipped same-day as it is purchased. FAKRA female to SMA jack cable assembly PE3C8110-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA right angle jack to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8110-36 can also be used in the other direction and will be SMA female to right angle FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA right angle female to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack right angle to SMA female low loss cable 36 inch length using LMR-100 coax.

1 : $49.59
25 : $47.11
50 : $44.63
100 : $42.65

TE Connectivity

2-1601039-2

TE Connectivity

131-086-002=TAB,2.8X.51,STDSMZ Magnet Wire Terminal Type: Tab Magnet Wire Size: 34 – 18 AWG Magnet Wire Size: .16 – 1.02 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .02 in Tab 34 – 18 AWG .16 – 1.02 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 2-1601039-2 | Internal Number: 2-1601039-2 | Alias Number: 131-086-002 | TE Connectivity
RoHS : Compliant

1,000 : $0.09
100 : $0.12
25 : $0.18
10 : $0.2
1 : $0.22

59,405

5-103908-7

TE Connectivity

08 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 5-103908-7 | Internal Number: 5-103908-7 | TE Connectivity
RoHS : Compliant

2,500 : $2.16
1,000 : $2.22
500 : $2.28
250 : $2.33
100 : $2.39
50 : $2.45
25 : $2.51
10 : $2.57
1 : $2.63

3,488

1-1971030-8

TE Connectivity

8POS Plug Housing for GIC 2.0 EV Series Number of Positions: 8 Connector & Housing Type: Plug Connector Product Type: Housing Connector System: Wire-to-Board Centerline (Pitch): 2 mm Std Temp Sig Grace Inertia Plug | 8 Plug Housing Wire-to-Board | Part Number: 1-1971030-8 | Internal Number: 1-1971030-8 | 2 mm | TE Connectivity
RoHS : Compliant

2,500 : $0.22
1,000 : $0.26
500 : $0.29
250 : $0.31
100 : $0.35
50 : $0.38
25 : $0.41
10 : $0.46
1 : $0.5

3,085

103308-2

TE Connectivity

014 LOPRO HDR SP 15DP Ribbon Cable Connector | Part Number: 103308-2 | Internal Number: 103308-2 | TE Connectivity
RoHS : Compliant

1,000 : $1.75
500 : $1.8
250 : $1.86
100 : $1.92
50 : $1.98
1 : $2.17

2,363

5-103904-1

TE Connectivity

2 MTE HDR SRRA LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 5-103904-1 | Internal Number: 5-103904-1 | TE Connectivity
RoHS : Compliant

25,000 : $1.45
10,000 : $1.48
5,000 : $1.51
2,500 : $1.54
1,000 : $1.57
500 : $1.6
250 : $1.63
100 : $1.66
50 : $1.69
25 : $1.72
10 : $1.75
1 : $1.78

1,690

103639-5

TE Connectivity

06 MTE HDR SRST LATCH .100CL Part Number: 103639-5 | Internal Number: 103639-5 | TE Connectivity
RoHS : Compliant

1,000 : $1.95
500 : $2.01
250 : $2.07
100 : $2.13
50 : $2.19
25 : $2.25
10 : $2.31
1 : $2.36

1,590

103639-4

TE Connectivity

05 MTE HDR SRST LATCH .100CL Part Number: 103639-4 | Internal Number: 103639-4 | TE Connectivity
RoHS : Compliant

1,000 : $2.71
500 : $2.79
250 : $2.87
100 : $2.95
50 : $3.04
25 : $3.12
10 : $3.2
1 : $3.28

1,537

5-103958-2

TE Connectivity

8X3 MTE RCPT SR LATCH .100CL Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: With Mating Retention Type: Latching Feature Standard Rectangular Connector | 3 Receptacle Connector Assembly With | Part Number: 5-103958-2 | Internal Number: 5-103958-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.55
1,000 : $1.59
500 : $1.63
250 : $1.67
100 : $1.72
50 : $1.76
25 : $1.8
10 : $1.84
1 : $1.88

1,510

1-5103308-3

TE Connectivity

A/L LOW PRO HDR 24P VERT BLACK Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 24 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5103308-3 | Internal Number: 1-5103308-3 | TE Connectivity
RoHS : Compliant

1,000 : $2.34
500 : $2.41
250 : $2.48
100 : $2.57
50 : $2.64
1 : $2.9

1,468

5-103735-9

TE Connectivity

10 MTE HDR SRST LATCH.100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 5-103735-9 | Internal Number: 5-103735-9 | TE Connectivity
RoHS : Compliant

2,500 : $3.34
1,000 : $3.43
500 : $3.52
250 : $3.61
100 : $3.7
50 : $3.79
25 : $3.88
10 : $3.97
1 : $4.06

718

5-103080-6

TE Connectivity

08 MODII HDR SRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Vertical Board-to-Board 8 | PCB Header & Receptacle | Part Number: 5-103080-6 | Internal Number: 5-103080-6 | TE Connectivity
RoHS : Compliant

5,000 : $2.62
2,500 : $2.68
1,000 : $2.75
500 : $2.81
250 : $2.87
100 : $2.94
50 : $3.0
25 : $3.07
10 : $3.13
1 : $3.19

501

5103310-3

TE Connectivity

A/L LOW PRO HDR 16P RA BLACK Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5103310-3 | Internal Number: 5103310-3 | TE Connectivity
RoHS : Compliant

1,000 : $2.11
500 : $2.17
250 : $2.23
100 : $2.31
50 : $2.38
1 : $2.61

359

1-5103310-0

TE Connectivity

A/L LOW PRO HDR 50P RA BLACK Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5103310-0 | Internal Number: 1-5103310-0 | TE Connectivity
RoHS : Compliant

1,000 : $4.5
500 : $4.63
250 : $4.77
100 : $4.93
50 : $5.08
1 : $5.57

229

1-5103308-2

TE Connectivity

A/L LOW PRO HDR 60P VERT BLACK Connector System: Wire-to-Board Number of Positions: 60 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 60 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5103308-2 | Internal Number: 1-5103308-2 | TE Connectivity
RoHS : Compliant

1,000 : $6.06
500 : $6.24
250 : $6.43
100 : $6.64
50 : $6.84
1 : $7.5

199

HSA1033RJ

TE Connectivity

HSA10 33R 5% Resistance Value: 33 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 33 Ω Wire Wound 5 % Power Resistor | Part Number: HSA1033RJ | Internal Number: 9-1625966-5 | TE Connectivity
RoHS : Compliant

100 : $4.61
50 : $4.83
25 : $5.05
10 : $5.27
1 : $5.49

Teledyne HiRel

M38510/30104BCA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, WITH PRESET AND CLEAR
RoHS : Not Compliant

M38510/30501BBA

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/32402BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33601B2A

Teledyne HiRel

SHIFT REGISTER, 4-BIT BIDIRECTIONAL UNIVERSAL, CASCADABLE
RoHS : Not Compliant

M38510/10103BHA

Teledyne HiRel

OP AMP, GENERAL PURPOSE
RoHS : Not Compliant

M38510/30402BBA

Teledyne HiRel

AND-OR-INVERT GATE
RoHS : Not Compliant

M38510/30903B2A

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

M38510/31005BBA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/31506B2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

M38510/32401BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33001BBA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/33701BEA

Teledyne HiRel

DECODER, 3-TO-8-LINE
RoHS : Not Compliant

M38510/33908B2A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/34001BAA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/34105B2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

C1812X7R501-103KNE

VENKEL LTD

HV Chip Capacitor;1812;X7R;500V;0.01uF;�10%
RoHS : Compliant

C1812X7R631-103KNE

VENKEL LTD

HV Chip Capacitor;1812;X7R;630V;0.01uF;�10%
RoHS : Compliant

C1825C0G251-103JNE

VENKEL LTD

HV Chip Capacitor;1825;C0G;250V;0.01uF;�5%
RoHS : Compliant

MELFC0102-RC-2103DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;210K;�0.5%
RoHS : Compliant

MELFC0102-YC-5103DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;510K;�0.5%
RoHS : Compliant

MELFC0102-YK-1103FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�100PPM;110K;�1%
RoHS : Compliant

MELFC0204-TK-5103FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�100PPM;510K;�1%
RoHS : Compliant

MELFC0207-XC-2103DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;210K;�0.5%
RoHS : Compliant

MELFC0207-XE-9103CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;910K;�0.25%
RoHS : Compliant

CR2512-2W-5103FT

VENKEL LTD

Chip Resistor;2512;2W;510K;�1%
RoHS : Compliant

HVCR1206-4W-2103FT

VENKEL LTD

High Voltage CR;1206;1/4W;210K;�1%
RoHS : Compliant

HPCR1206-V-1103FT

VENKEL LTD

High Power CR;1206;1/2W;110K ;�1%
RoHS : Compliant

HPTF0805-RN-5103CT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;510K;�0.25%
RoHS : Compliant

HPTF1206-UC-5103AT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;510K;�0.05%
RoHS : Compliant

HPTF1206-UE-2103BT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;210K ;�0.1%
RoHS : Compliant

Waytek, Inc.

643231039

Molex

CP Terminal 1.5 Sn - 1 to 2sqmm Loose

50 : $0.2112
200 : $0.2005
500 : $0.1858
1,000 : $0.179

11,707

643231039

Molex

CP Terminal 1.5 Sn - 1 to 2sqm Reel (5500 pcs per reel 0

5,500 : $0.1487
27,500 : $0.1344

11,000

0891030.U

Littelfuse Inc

30 Amp Low Profile Mini Fuse Green Automotive Mini Fuse
RoHS : Compliant

10 : $0.5111
50 : $0.4554
100 : $0.4137
200 : $0.3997
500 : $0.3858
1,000 : $0.3706

5,397

0311030.M

Littelfuse Inc

30 Amp Fuses Glass AGC

50 : $0.2966
200 : $0.2786
500 : $0.2584
1,000 : $0.2412
5,000 : $0.2352

4,413

10103

Hillsdale Terminal & Tool Inc

Uninsulated Ring Terminal 16-14 Gauge, 3/8" Stud

100 : $0.1034
200 : $0.0938
500 : $0.0839
1,000 : $0.076
5,000 : $0.0725

1,935

31-103

Pollak

Pollak 31-103 4-position ignition switch is a heavy-duty keyed ignition switch for automotive and equipment use. It provides 4-position circuit control in a panel-mounted housing, supporting accessory, ignition, and start switching from a single key actuator.

1 : $26.61
5 : $23.78
10 : $22.23
50 : $20.18
100 : $18.33
200 : $16.67

285

684-2421-032-02

Trombetta

Sealed 24V DC Contactor Continuous Duty, Flat Bracket Silver Contacts

1 : $41.41
5 : $36.98
10 : $34.51
50 : $32.53
100 : $31.06
200 : $29.58

132

71030I

Eaton Electronics

Sure Power 71030i Converter 30A 72V / 96V TO 12V

1 : $341.23
5 : $324.28
10 : $309.77

77103

Grote Industries Inc

Mighty Mini Strobe Light .25 AMPS 12 VDC W 5 1/8" H 3 5/8"

1 : $93.07
5 : $87.28
10 : $82.02
25 : $77.82
50 : $75.19

21030C10

Eaton Electronics

Sure Power 21030C10 Converter 30A 24V TO 12V REPLACED 80107 21030C00

1 : $485.35
5 : $461.98
10 : $441.52

1039

Blue Sea Systems

Blue Sea Systems 1039 Intelligent Charging Dual USB Socket, 4.8A 12/24V **RETAIL**

1 : $60.19
10 : $60.19

211030-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211030-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69

19221-0393

Molex

1/0 Copper Eyelet 1/2" Stud
RoHS : Unknown

10 : $1.2184
50 : $1.0882
100 : $0.9858
200 : $0.9542
500 : $0.9226
1,000 : $0.8872

192210381

Molex

3/0 Copper Eyelet 3/8" Stud
RoHS : Compliant

1 : $2.8844
10 : $2.5612
50 : $2.3997
100 : $2.3074
200 : $2.2152
500 : $2.0998

192210396

Molex

1GA Copper Eyelet 5/16" Stud
RoHS : Compliant

10 : $1.3431
50 : $1.21
100 : $1.1434
200 : $1.1011
500 : $1.0406
1,000 : $1.0103

Win Source Electronics

CL21B103KBANNNC

Samsung Electronics Co. Ltd

CAP CER 10000PF 50V X7R 0805

18,405 : $0.0163
14,795 : $0.0169
11,365 : $0.0176
7,940 : $0.0189
5,105 : $0.0196
2,395 : $0.0209

990,000

NTCG103JF103FT1S

TDK Corporation

THERMISTOR NTC 10KOHM 3380K 0402 / NTC Thermistor 10k 0402 (1005 Metric)
RoHS : Compliant

12,825 : $0.0234
9,580 : $0.0261
7,410 : $0.027
5,380 : $0.0279
3,475 : $0.0288
1,430 : $0.035

310,000

NTCG103JF103FT1

TDK Corporation

NTC THERMISTOR 10K OHM 1% 0402
RoHS : Compliant

13,220 : $0.0227
9,845 : $0.0254
7,635 : $0.0262
5,540 : $0.0271
3,575 : $0.028
1,470 : $0.0341

260,000

PRF15BB103RB6RC

Murata Manufacturing Co Ltd

CAP CER 1000PF 0402
RoHS : Compliant

3,765 : $0.0797
2,815 : $0.0889
2,175 : $0.092
1,580 : $0.095
1,020 : $0.0981
420 : $0.1196

130,000

BSH103

Nexperia

N-channel enhancement mode MOS transistor
RoHS : Compliant

665 : $0.4531
495 : $0.5054
385 : $0.5228
280 : $0.5402
180 : $0.5576
75 : $0.6796

100,000

B57232V5103F360

TDK Electronics

THERMISTOR NTC 10KOHM 3380K 0402 / NTC Thermistor 10k 0402 (1005 Metric)
RoHS : Unknown

10,035 : $0.0299
7,490 : $0.0334
5,800 : $0.0345
4,205 : $0.0357
2,720 : $0.0368
1,115 : $0.0449

58,817

NTCG163JF103FT1

TDK Corporation

NTC THERMISTOR 10K OHM 1% 0603
RoHS : Compliant

1,905 : $0.1576
1,425 : $0.1758
1,100 : $0.1819
800 : $0.1879
520 : $0.194
215 : $0.2364

36,000

BA10393F-E2

ROHM Semiconductor

IC COMPARATOR 2-CHANNEL SOP8
RoHS : Compliant

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

30,045

GD32F103VET6

GigaDevice Semiconductor (Beijing) Inc

MCU

190 : $1.5841
152 : $1.6485
117 : $1.7129
82 : $1.8417
53 : $1.9061
25 : $2.0349

28,450

B82422A1103K100V3

TDK Electronics

2,620 : $0.1285
1,955 : $0.1432
1,515 : $0.1483
1,100 : $0.1532
710 : $0.1581
295 : $0.1926

21,107

NTCS0603E3103FLT

Vishay Huntington

NTC THERMISTOR 10K OHM 1% 0603

2,015 : $0.149
1,505 : $0.1662
1,165 : $0.1719
845 : $0.1777
550 : $0.1834
225 : $0.2235

15,469

CL10B103KC8NNNC

Samsung Electronics Co. Ltd

44,120 : $0.0068
32,895 : $0.0076
25,320 : $0.0079
18,520 : $0.0081
11,905 : $0.0084
4,905 : $0.0102

12,000

PGA103U

Texas Instruments

SP Amp Variable Gain Amp Single ±18V 8-Pin SOIC Tube / IC OPAMP PGA 1.5MHZ 8SOIC
RoHS : Compliant

39 : $7.8086
29 : $8.7096
23 : $9.0099
17 : $9.3102
11 : $9.6106
5 : $11.7129

6,000

ADXL103CE

Analog Devices Inc

ACCELEROMETER 1.7G ANALOG 8CLCC
RoHS : Compliant

17 : $18.7122
12 : $20.8713
10 : $21.591
7 : $22.3107
5 : $23.0304
2 : $28.0682

6,000

C0603C103J5RACTU

KEMET Corporation

CAP CER 10000PF 50V X7R 0603
RoHS : Compliant

20,980 : $0.0143
15,725 : $0.0159
12,200 : $0.0164
8,825 : $0.017
5,715 : $0.0175
2,340 : $0.0214

4,800

103-4-RV Distributor

Link URL