1113-6-RV Price, Distributor, Stock

Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm 1.6/5.6 Plug Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and 1.6/5.6 cable connection on the other. Our 1.6/5.6 to 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36111-36, can also be known as a 1.6/5.6 male to 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36111-36 is built with RG179 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to 1.6/5.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 male to 1.6/5.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 36 inch length using 75 Ohm RG179 coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

823

PE3C0111-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Right Angle With Times Connectors Cable 36 Inch Length Using LMR-600 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 36 inch length using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 36 inch length using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0111-36, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0111-36 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0111-36 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 36 inch length using LMR-600 coax.

1 : $231.99
25 : $220.39
50 : $208.79

160

PE3FCA111-3M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM5, 2.0mm LSZH, Lime Green-3M. Pasternack’s PE3FCA111-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our lime green fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA111-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements.

1 : $26.39
5 : $25.33
10 : $24.28
25 : $23.22

PE51113-1

Pasternack Enterprises

Key Specifications, Antenna Type: Mobile, Polarization: Vertical, Minimum Frequency: 880 MHz, Maximum Frequency: 2.17 GHz, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 3 dB, Maximum Input VSWR: 2:1. Mobile Dual Band Antenna Operates From 880 MHz to 2.17 GHz With a Nominal 3 dBi Gain SMA Female Input Connector. Mobile antenna PE51113-1 from Pasternack is part of our extensive in-stock omni-directional radio antenna selection. This dual band mobile antenna has a frequency range of 880 MHz to 965 MHz, 1.71 GHz to 2.17 GHz and a 3 nominal dBi gain. Our mobile antenna uses SMA input and is rated for 50 Watts input. PE51113-1 mobile radio antenna is one of over 40,000 RF, microwave and millimeter wave components supplied from Pasternack. Our mobile aerial can be bought and shipped worldwide the same-day as with our other in-stock RF parts.

1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1

PE71S1113

Pasternack Enterprises

Key Specifications, Connector Series: Field Replaceable 2.4mm, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 100 MHz, Maximum Frequency: 50 GHz, Impedance: 50 Ohm, Maximum Input Power: 23 dBm, Maximum Input VSWR: 3:1, Maximum Insertion Loss: 7.5 dB, Minimum Isolation: 40 dB. Absorptive SPDT Ultra-Wideband SPDT PIN Diode Switch Operating 100 MHz to 50 GHz, Up to 23 dBm, 50 nsec and 2.4mm. The PE71S1113 PIN diode switch from Pasternack has a absorptive design with a SPDT switch configuration. Our RF absorptive PIN diode switch uses field replaceable 2.4mm connectors at 50 Ohm Ohm impedance. This field replaceable 2.4mm PIN diode absorptive switch has a minimum frequency of 100 MHz and a maximum frequency of 50 GHz. The Pasternack PIN diode absorptive RF switch is rated at a switching speed of 100 ns and a maximum RF input power (CW) of 23 dBm. The PE71S1113 PIN diode switch from Pasternack has an aluminum housing with gold plating. This absorptive SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. This threaded PIN diode switch is rated at a 5 Vdc voltage along with maximum current of 100 mA. Our 23 dBm RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 3:1 maximum VSWR (Voltage Standing Wave Ratio). The Maximum insertion loss of this field replaceable 2.4mm absorptive switch is 7.5 dB with a minimum isolation of 40 dB. Our PE71S1113 absorptive SPDT PIN diode switch is a great option for test & measurement, 5g communication, military electronic systems, wireless infrastructure, fiber optics and research & development applications. Additional specs for this SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings above. The absorptive PIN diode radio frequency switch PE71S1113 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our absorptive field replaceable 2.4mm coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF PIN diode switch for your requirement.

1 : $9,430.0
5 : $9,052.8
10 : $8,675.6
25 : $8,298.4

PE3C11131/HS

Pasternack Enterprises

PE3C11139

Pasternack Enterprises

PE3C11113-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11113-36 low loss TNC male to TNC female bulkhead RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C11113-36 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11113-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. This PE3C11113-36 TNC plug to TNC jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11113-36 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. This low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $415.02
10 : $398.42
25 : $381.82
100 : $365.22

PE3C11113-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11113-48 low loss TNC male to TNC female bulkhead RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C11113-48 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11113-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. This PE3C11113-48 TNC plug to TNC jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11113-48 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. This low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $443.21
10 : $425.48
25 : $407.75
100 : $390.02

PE3C1113/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female to UHF Female Cable Using LMR-195 Coax with HeatShrink. PE3C1113/HS is a SMA female to UHF female cable using LMR-195 coax. This Pasternack SMA female to UHF female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm UHF for connector 2. Our female SMA to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1113/HS SMA female to UHF female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W11132

Pasternack Enterprises

PEWCT1113

Pasternack Enterprises

1 : $3,110.0
5 : $2,985.6
10 : $2,861.2

PE3C11134/HS

Pasternack Enterprises

PE3W21113

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. SMA Male to N Male Right Angle Cable Using RG8 Coax. PE3W21113 is a SMA male to N male right angle cable using RG8 coax. This Pasternack SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21113 SMA male to N male right angle cable assembly is constructed with RG8 coax.

PE3C11113-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11113-60 low loss TNC male to TNC female bulkhead RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C11113-60 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11113-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. This PE3C11113-60 TNC plug to TNC jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11113-60 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. This low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $471.4
10 : $452.54
25 : $433.69
100 : $414.83

Teledyne HiRel

5962-89841113A

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

Venkel Ltd.

UPTF0805-10W-N-1113DT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;111K ;�0.5%
RoHS : Compliant

TFCR0603-16W-E-1113BT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;111K ;�0.1%
RoHS : Compliant

TFCR0603-16W-E-1113CT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;111K ;�0.25%
RoHS : Compliant

TFCR0805-8W-C-1113DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;111K ;�0.5%
RoHS : Compliant

TFCR2512-2W-K-1113DT

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;111K ;�0.5%
RoHS : Compliant

UPTF0805-10W-N-1113CT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;111K ;�0.25%
RoHS : Compliant

TFCR0603-10W-C-1113CT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;111K ;�0.25%
RoHS : Compliant

TFCR0603-10W-E-1113DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;111K ;�0.5%
RoHS : Compliant

TFCR1206-8W-C-1113BT

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;111K ;�0.1%
RoHS : Compliant

TFCR2512-2W-E-1113FT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;111K ;�1%
RoHS : Compliant

TFCR0402-16W-C-1113FT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;111K ;�1%
RoHS : Compliant

TFCR0402-16W-E-1113BT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;111K ;�0.1%
RoHS : Compliant

TFCR0402-16W-K-1113CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;111K ;�0.25%
RoHS : Compliant

TFCR0603-10W-E-1113BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;111K ;�0.1%
RoHS : Compliant

TFCR0603-16W-E-1113CT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;111K ;�0.25%
RoHS : Compliant

Vyrian

9376-1113-001

Radiall

RF SMA Connector, Female, Panel Mount, Microstrip Mount, Receptacle
RoHS : Compliant

15,843

L17H2211137

Amphenol Communications Solutions

D Subminiature Connector, 9 Contact(s), Female-Male, Solder Terminal

13,565

MAX11137ATI+

Analog Devices Inc

ADC, Successive Approximation, 12-Bit, 1 Func, 16 Channel, Serial Access
RoHS : Compliant

11,410

MAX11131ATI+T

Analog Devices Inc

ADC, Successive Approximation, 12-Bit, 1 Func, 16 Channel, Serial Access
RoHS : Compliant

10,557

MAX11131ATI-T

Analog Devices (Maxim Integrated)

10,324

LPC1113JHN33/203E

NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33
RoHS : Compliant

7,018

DC1113A

Analog Devices Inc

6,844

LT1113CS8

Analog Devices Inc

Operational Amplifier, 2 Func, 2800uV Offset-Max, BIPolar, PDSO8
RoHS : Not Compliant

6,725

111317-HMC541LP3

Analog Devices Inc

6,720

MAX11130ATI

Analog Devices Inc

6,276

74ACT11139J

Texas Instruments

Decoder/Driver, CMOS, CDIP16
RoHS : Not Compliant

5,851

MAX11135ATI-T

Analog Devices (Maxim Integrated)

5,510

74AC11138NE4

Texas Instruments

Decoder/Driver, AC Series, Inverted Output, CMOS, PDIP16
RoHS : Compliant

3,626

2002411136

Molex

Rectangular Power Connector
RoHS : Compliant

431

RFS1113-105ME

Coilcraft Inc

General Purpose Inductor, 1000uH, 20%, 1 Element, Ferrite-Core
RoHS : Compliant

287

Waytek, Inc.

COV1113Z2

KMC Controls Inc

5/8" Vinyl Coated Clamp 3/4" Wide

20 : $0.749
50 : $0.6674
100 : $0.6056
200 : $0.5859
500 : $0.5661
1,000 : $0.5438

4,705

Win Source Electronics

ETC1-1-13TR

MACOM

TRANSFORMER
RoHS : Compliant

100 : $3.0193
75 : $3.3677
58 : $3.4838
42 : $3.6
27 : $3.7161
12 : $4.529

48,000

ETC1-1-13

TE Connectivity

E-Series RF 1:1 Transmission Line Transformer 4.5 - 3000 MHz
RoHS : Not Compliant

955 : $0.3522
765 : $0.3666
590 : $0.3808
415 : $0.4095
265 : $0.4238
125 : $0.4525

48,000

QRE1113

onsemi

SENSOR REFL 1MM PHOTOTRANS THRU
RoHS : Compliant

325 : $0.9337
245 : $1.0414
190 : $1.0773
135 : $1.1132
90 : $1.1491
40 : $1.4005

35,949

MA4L011-134

MACOM

RF DIODE PIN 35V CHIP / RF Diode PIN - Single 35V 100 mA Chip
RoHS : Compliant

250 : $1.3499
190 : $1.5056
145 : $1.5576
105 : $1.6094
70 : $1.6614
30 : $2.0248

31,500

HR911130C

Hanrun Electronics Co Ltd

190 : $1.582
142 : $1.7645
110 : $1.8253
80 : $1.8862
52 : $1.947
22 : $2.3729

19,408

ADS1113IRUGT

Texas Instruments

1-Channel Single ADC Delta-Sigma 860sps 16-bit Serial 10-Pin X2QFN T/R / Ultra-Small, Low-Power, 16-Bit Analog-to-Digital Converter with Internal Reference | IC ADC 16-BIT I2C PROGBL 10-QFN
RoHS : Compliant

66 : $4.5886
49 : $5.118
38 : $5.2945
28 : $5.471
18 : $5.6475
8 : $6.8829

19,150

TPS51113DRCT