 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1260-P-AB3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | RRH-35-12-60 | Richco | Ferrite: sleeve; L: 6mm; Øint: 1.2mm; Øout: 3.5mm; ferromagnetic A5 |
| 3,800 | |
| SRR1260-1R5Y | Bourns Inc | Inductor: wire; SMD; 1.5uH; ±30%; 12.5x6mm; 9.9A; ferrite; H: 6mm RoHS : Compliant |
| 600 | ||
| H1260FNL | YAGEO Corporation | Transformer: impulse; SMD; 12.7x9.53x6mm; 350uH; 0÷70°C RoHS : Compliant |
| 56 | ||
| M80-4612605 | Harwin | Connector: wire-wire/PCB; plug; female; data; Datamate J-Tek; 3A RoHS : Compliant |
| 24 | ||
| M80-4712605 | Harwin | Connector: wire-wire/PCB; plug; female; data; Datamate J-Tek; 3A RoHS : Compliant |
| 0 | ||
| M80-5C12605M3 | Harwin | Connector: wire-wire/PCB; plug; male; data; Datamate J-Tek; PIN: 26 RoHS : Compliant |
| 0 | ||
| MCT06030D1260BPW00 | Vishay Intertechnologies | Resistor: thin film; 126Ω; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MFBM1V2012-601-R | Eaton Electronics | Ferrite: bead; Imp.@ 100MHz: 600Ω; SMD; 2A; 0805; R: 100mΩ; Z: 600Ω |
| 0 | ||
| M80-4D12605FC | Harwin | Connector: wire-wire/PCB; plug; female; data; Datamate J-Tek; 3A RoHS : Compliant |
| 0 | ||
| TL1260GQRBLK | E-Switch Inc | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/12VDC; THT; LED; green RoHS : Compliant |
| 0 | ||
| G125-FS12605F2P | Harwin | Connector: wire-wire/PCB; socket; female; data; Gecko-SL; 2A; 2x13 RoHS : Compliant |
| 0 | ||
| G125-MH12605L3R | Harwin | Connector: wire-wire/PCB; socket; male; data; Gecko Latch; 2A; 2x13 RoHS : Compliant |
| 0 | ||
| GN 2342-NI-12-60-E-1 | Elesa+Ganter | Assembly pin; Ø: 12mm; L: 60mm; stainless steel |
| 0 | ||
| GN 42-50-M12-60-A0-S | Elesa+Ganter | Foot; Base dia: 50mm; M12; steel; Plunger length: 60mm; zinc |
| 0 | ||
| GN 42-60-M12-60-A0-S | Elesa+Ganter | Foot; Base dia: 60mm; M12; steel; Plunger length: 60mm; zinc |
| 0 | ||
 Avnet Americas | SRR1260-330M | Bourns Inc | - Tape and Reel (Alt: SRR1260-330M) RoHS : Compliant |
| 6,600 | |
| SRR1260A-150M | Bourns Inc | - Tape and Reel (Alt: SRR1260A-150M) RoHS : Compliant |
| 4,200 | ||
| SRF1260-101M | Bourns Inc | Inductor, Power, Dual, 100 ?H, 0.171 ohm, 1.78 A, 12.5mm x 12.5mm x 6mm - Tape and Reel (Alt: SRF1260-101M) RoHS : Compliant |
| 3,200 | ||
| SRR1260A-102K | Bourns Inc | - Tape and Reel (Alt: SRR1260A-102K) RoHS : Compliant |
| 2,400 | ||
| 55/7311-26-0/9-0CS2738 | TE Connectivity | - Bag (Alt: 161886-000) RoHS : Compliant |
| 2,080 | ||
| SRR1260-220M | Bourns Inc | Power Inductor (SMD), 22 ?H, 4 A, Shielded, 3.7 A, SRR1260 Series - Tape and Reel (Alt: SRR1260-220M) RoHS : Compliant |
| 1,200 | ||
| SRR1260A-220M | Bourns Inc | - Tape and Reel (Alt: SRR1260A-220M) RoHS : Compliant |
| 600 | ||
| SRR1260-4R7Y | Bourns Inc | Power Inductor (SMD), 4.7 ?H, 6.8 A, Shielded, 7 A, SRR1260 Series - Tape and Reel (Alt: SRR1260-4R7Y) RoHS : Compliant |
| 600 | ||
| 12600-S-12 | 3M Interconnect | - Bulk (Alt: 7000090312) RoHS : Compliant |
| 400 | ||
| 4-641126-0 | TE Connectivity | - Bulk (Alt: 4-641126-0) RoHS : Compliant |
| 284 | ||
| M39012/60-3001 | Amphenol Corporation | - Trays (Alt: M39012/60-3001) RoHS : Compliant |
| 250 | ||
| SF1112-6035 | Amphenol Corporation | - Trays (Alt: SF1112-6035) RoHS : Compliant |
| 250 | ||
| MTMM-126-06-H-D-180 | Samtec Inc | - Bulk (Alt: MTMM-126-06-H-D-180) RoHS : Compliant |
| 131 | ||
| 80-0012-6010-0 | 3M Interconnect | MOLDED ASSEMBLY 1M SERIES A1 16-006-3365 - Bulk (Alt: 7010501860) RoHS : Not Compliant |
| 100 | ||
| SSW-126-01-S-D | Samtec Inc | - Bulk (Alt: SSW-126-01-S-D) RoHS : Compliant |
| 21 | ||
 Newark | FMC00512-60 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00512-60 RoHS : Not Compliant |
| 707 | |
| MTMM-105-02-S-D-126-009 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 10Pos; |Samtec, Inc. MTMM-105-02-S-D-126-009 RoHS : Compliant |
| 646 | ||
| CLT-126-02-F-D | Samtec Inc | Low Profile Dual-Wipe Socket; |Samtec, Inc. CLT-126-02-F-D RoHS : Not Compliant |
| 269 | ||
| MTLW-126-07-G-D-016 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 52Pos; |Samtec, Inc. MTLW-126-07-G-D-016 RoHS : Compliant |
| 231 | ||
| MTSW-126-07-T-D-174 | Samtec Inc | Connector, Header, 52Pos, 2Row, 2.54Mm; |Samtec, Inc. MTSW-126-07-T-D-174 RoHS : Compliant |
| 192 | ||
| MTSW-126-07-T-T-240 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 78Pos; |Samtec, Inc. MTSW-126-07-T-T-240 RoHS : Compliant |
| 179 | ||
| SLM-126-01-G-D | Samtec Inc | Through-Hole Micro Socket; |Samtec, Inc. SLM-126-01-G-D RoHS : Compliant |
| 178 | ||
| C3RWT1260 | Hammond Manufacturing | Raceway Duct, Ip24, Nema 3R, 305Mm; |Hammond C3RWT1260 RoHS : Compliant |
| 138 | ||
| HTMS-126-01-T-S | Samtec Inc | Pin Header, Htms-126-01-T-S; |Samtec, Inc. HTMS-126-01-T-S RoHS : Compliant |
| 90 | ||
| MTMM-126-06-L-Q-070 | Samtec Inc | Pin Header, Mtmm-126-06-L-Q-070; |Samtec, Inc. MTMM-126-06-L-Q-070 RoHS : Compliant |
| 69 | ||
| 28-21260 | Stellar labs (MCM Electronics) | Six Outlet Grounded Wall Tap; No. Of Outlets:6Outlets; Outlet Type:Nema 5-15R; Current Rating:15A; Supply Voltage Vac:125V; Plug Type:-; Cable Length:-; Product Range:- Rohs Compliant: Yes |Stellar Labs Power 28-21260 RoHS : Compliant |
| 40 | ||
| FMAD1260 | Fairview Microwave Inc | Rf/Coaxial Adapter, 3.5Mm Coaxial; |Fairview Microwave FMAD1260 RoHS : Not Compliant |
| 15 | ||
| 1260-1SMG-120 | Bourns Inc | Surge Protector, 100Ka, 150Vac; |Bourns, Inc. 1260-1SMG-120 RoHS : Compliant |
| 10 | ||
| 1260 | Adafruit Industries | Kit Contents:4 Pack Of Smart Pixels; Product Range:Flora Rohs Compliant: Yes |Adafruit 1260 RoHS : Compliant |
| 0 | ||
| 1260 | Keystone Electronics Corp | Bolt; |Keystone 1260 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | PD57-2-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 128 | |
| PD60-3-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 90 | ||
| PD57-1-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 78 | ||
| LT1260IS#PBF | Analog Devices Inc | L Cost 2x & 3x 130MHz C F Am RoHS : Compliant |
| 69 | ||
| PD60-4-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 65 | ||
| PD57-1-1260-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 64 | ||
| PD60-3-1260-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 55 | ||
| DC1260A-B | Analog Devices Inc | LTC3539EDCB-2 DEMO BOARD - 2A, |
| 37 | ||
| PD86-3-1260-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 23 | ||
| TMCM-1260-CABLE | Analog Devices Inc | Cable Loom for TMCM-1260 |
| 17 | ||
| DC1260A-A | Analog Devices Inc | LTC3539EDCB DEMO BOARD - 2A, 1 |
| 10 | ||
| EVAL-ADM1260EBZ | Analog Devices Inc | EVALUATION BOARD RoHS : Compliant |
| 4 | ||
| LT1260CS#TRPBF | Analog Devices Inc | L Cost 2x & 3x 130MHz C F Am RoHS : Compliant |
| 0 | ||
| LT1260IN#PBF | Analog Devices Inc | L Cost 2x & 3x 130MHz C F Am RoHS : Compliant |
| 0 | ||
| ADM1260ACPZ | Analog Devices Inc | Programmable Supervisor Sequen RoHS : Compliant |
| 0 | ||
 RS | 1260 | Heyco | STRAIN RELIEF BUSHING, .875", .125" PANEL THICKNESS, BLACK |
| 1,302 | |
| 890334026018CS (8712607) | Wurth Elektronik | WCAP-FTXX FILM CAPACITOR 560NF 310VAC |
| 100 | ||
| 1260 | Thomas & Betts | SINGLE GANG NAIL-ON OUTLET BOX, 3.7/8"L X 2-3/8"W X 3-3/4"D, BROWN |
| 97 | ||
| 0312.600HXP (312.600P) | Littelfuse Inc | CARTRIDGE FUSE, FAST-ACTING, 3AG, 250V, 0.6A, 312 SERIES |
| 70 | ||
| 28.0126-05021 | Stäubli Electrical Connectors | 4 MM SAFETY TEST LEAD 50 CM BLACK |
| 49 | ||
| VAD1260B-AEC00-000 (RCV-00000654 | VAD1260B-AEC00-000 | VAD1260BAEC00000) | Carling Technologies | SWITCH, DPDT, 20 A, 12 V, ON-NONE-OFF, 10 MILLIOHMS, BLACK, 1500 V(RMS), PANEL |
| 25 | ||
| 1260-1SMG-120 | Bourns Inc | AC HYBRID SPD, 100KA, 1W MG,150VAC RoHS : Compliant |
| 5 | ||
| 1260-4NSMG-120 | Bourns Inc | AC HYBRID SPD, 100KA, 3W MG,150VAC+NPE RoHS : Compliant |
| 5 | ||
| V1D1260B-AEC00-000 (RCV-37112476 | V1D1260B-AEC00-000 | V1D1260BAEC00000) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 2 | ||
| D4C-1260 (D4C1260) | OMRON Industrial Automation | LIMIT SWITCH, CENT ROLLER LEVER, STANDARD LOAD, VCTF OIL-RESIST CABLE, 3M CABLE |
| 1 | ||
| 130126-0199 (4022) | Woodhead Molex | SUPER-SAFEWAY, TWO BUTTON STATION, SINGLE SPEED, GRIP 3/4", 130126 SERIES |
| 1 | ||
| 1260 | Leviton Manufacturing Co | TOGGLE SWITCH, DOUBLE-THROW CTR-OFF, MOMENTARY, SINGLE-POLE, 30A, 120/277V |
| 0 | ||
| 1260 | Lincoln Industrial Corporation | POWER LUBER 12V (LI-ION) |
| 0 | ||
| 1260 | Adafruit Industries | FLORA RGB SMART NEOPIXEL VERSION 3 - PACK OF 4 |
| 0 | ||
| 1260 | Keystone Electronics Corp | SPADE BOLT,8-32 THREAD,.375" THREAD LENGTH, STEEL, ZINC PLATE RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | 148-01126-000 | Microchip Technology Inc | IC MEMORY EEPROM SERIAL-2Wire 1M-BIT 128KX8 1.7-5.5V,-40/+85C, SOIC-8 JEDEC, Projected EOL: 2051-01-25 - Contact for Pricing | 0 | ||
| 990-03391-260 | Microchip Technology Inc | PRECISION CALIBRATION MARKETING KIT, BLUESKY GNSS FIREWALL DC, 60M, Projected EOL: 2051-01-16 - Contact for Pricing | 0 | |||
| DSC1123CI2-126.0000 | Microchip Technology Inc | MEMS OSC, LVDS, 126.0000MHz, 25ppm, 2.5-3.3V, -40 to 85C, 3.2x2.5mm, VDFN, Projected EOL: 2051-07-20 RoHS : Compliant |
| 0 | ||
| DSC1123CI2-126.0000T | Microchip Technology Inc | MEMS OSC, LVDS, 126.0000MHz, 25ppm, 2.5-3.3V, -40 to 85C, 3.2x2.5mm, VDFN, Projected EOL: 2051-07-20 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 126-060 | Bivar Inc | 1,646 | |||
| E3-126-082 | Southco | 777 | ||||
| 1260 | Heyco | 332 | ||||
| 81-11-260-16 | Southco | 191 | ||||
| CR3212-6-03 | Cherry Aerospace | 135 | ||||
| 126-06-12.25 | Calmark | 60 | ||||
| AA59126/09905 | Staffall | 50 | ||||
| 82-11-260-20 | Southco | 33 | ||||
| NW126-06-3.25 | Calmark | 30 | ||||
| NW126-09-12.25 | Calmark | 30 | ||||
| 126-06-1.25 | Calmark | 29 | ||||
| AA59126/09004 | Staffall | 15 | ||||
| 126-06-11.25 | Calmark | 13 | ||||
| MS21260S6LH | MS Miscellaneous | 4 | ||||
| 126-05-SS-1032 | Promptus Electronic Hardware | 1 | ||||
 Rochester Electronics | BUK9K12-60EX | Nexperia | MOSFET 2 N-Channel 60V 35A (Ta) SOT-1205 T/R RoHS : Compliant |
| 3,000 | |
| PSMN012-60HLX | Nexperia | N-channel 60 V, 12.5 mOhm, logic level MOSFET in LFPAK56D using TrenchMOS technology enhanced for repetitive avalanche RoHS : Compliant |
| 2,848 | ||
| LT1260CS#PBF | Analog Devices Inc | Op Amp Current Feedback 16-SOIC Tube RoHS : Compliant |
| 28 | ||
| HI1260JCQ | Harris Semiconductor | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, PQFP48 RoHS : Not Compliant |
| 568 | ||
LT1260CS#TRPBF | Linear Technology | Op Amp Current Feedback 16-SOIC T/R RoHS : Compliant |
| 159 | ||
| LT1260IS#PBF | Linear Technology | Op Amp Current Feedback 16-SOIC Tube RoHS : Compliant |
| 112 | ||
| DS92LV1260TUJB | National Semiconductor Corporation | Line Receiver, 7 Func, 7 Rcvr, CMOS, PBGA196 RoHS : Not Compliant |
| 1,286 | ||
BTB12-600BWRG | STMicroelectronics | TRIAC Standard 600V 12A TO-220-3 Tube RoHS : Compliant |
| 191,422 | ||
| BTB12-600CRG | STMicroelectronics | TRIAC Standard 600V 12A TO-220-3 Tube RoHS : Compliant |
| 48,000 | ||
| BTB12-600SWRG | STMicroelectronics | TRIAC Standard 600V 12A TO-220-3 Tube RoHS : Compliant |
| 19,650 | ||
| BTB12-600TWRG | STMicroelectronics | TRIAC Standard 600V 12A TO-220-3 Tube RoHS : Compliant |
| 42,000 | ||
| LY A676-R1T1-26-0-20-R33-Z | ams OSRAM Group | LY A676 - SIDELED, Yellow LED |
| 10,000 | ||
| LY M676-Q2T1-26-0-20-R18-Z | ams OSRAM Group | LY M676 - Mini TOPLED, Yellow LED RoHS : Compliant |
| 3,000 | ||
| LY M676-R2T1-26-0-20-R18-Z | ams OSRAM Group | LY M676 - Mini TOPLED, Yellow LED RoHS : Compliant |
| 12,000 | ||
| LY T67K-J2M1-26-0-2-R18-Z | ams OSRAM Group | LY T67K - TOPLED, Yellow LED RoHS : Compliant |
| 14,000 | ||
 Sager | MTLW-126-07-G-D-016 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 231 | |
| 1260 | ABB Group | Conduit Fittings & Accessories | 0 | |||
| 1260 | Keystone Electronics Corp | Screws & Fasteners BOLT RoHS : Compliant |
| 0 | ||
| MMS-126-01-F-DV | Samtec Inc | Headers & Wire Housings Classic Socket Strips, 2.00 mm (.0787) Pitch RoHS : Compliant |
| 0 | ||
| MMT-126-01-L-SH-K | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMT-126-01-T-DH-K-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMT-126-02-T-SH-P | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| PTT-126-01-S-T | Samtec Inc | Headers & Wire Housings 2.00 mm Press-Fit Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-05-G-S-110 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-126-06-F-S-145 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-126-07-F-D-280 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-122-03-G-D-126-020 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-126-02-L-S-070 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-126-03-L-D-160 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-126-04-S-D-225 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Ameya Holding Limited | BTA12-600BRG | STMicroelectronics | BTA12 Series 600 Vdrm 12 A Flange Mount Standard Triac Thyristor - TO-220AB RoHS : Compliant | 11,080 | ||
SCAN921260UJB/NOPB | Texas Instruments | IC DESERIALIZER X6 1:10 196LBGA RoHS : Compliant | 9,148 | |||
| BTB12-600BWRG | STMicroelectronics | BTB12 Series 600 Vdrm 12 A Flange Mount Snubberless Triac AC Switch - TO-220AB RoHS : Compliant | 5,680 | |||
PSMN012-60YS,115 | Nexperia | PSMN012 Series 60 V 0.0178 Ohm 59 A SMT N-Channel Standard Level MOSFET - LFPAK RoHS : Compliant | 1,994 | |||
| BTB12-600CWRG | STMicroelectronics | Triac; 600V; 12A; TO220AB; Igt: 35mA; Snubberless™ RoHS : Compliant | 1,530 | |||
| BTA12-600CRG | STMicroelectronics | BTA12 Series 600 Vdrm 12 A Flange Mount Standard Triac Thyristor - TO-220AB RoHS : Compliant | 1,080 | |||
| I5-12600KF | Intel Corporation | 200 | ||||
2SB1260T100Q | ROHM Semiconductor | RoHS : Compliant |
| 40 | ||
 ComSIT USA | BTA312600C127 | AVAILABLE EU | 1,084 | |||
ComSIT USA | TPS61260DRVR | Texas Instruments | TINY LOW INPUT VOLTAGE BOOST CONVERTER Switching Controller, Current-mode, 0.1A, 2500kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 702,000 | ||
| LYA676R1T126020R33Z | OSRAM GmbH | LED Yellow 1 LED Clear 2-SMD, Right Angle RoHS : Compliant | 12,000 | |||
| MSS1260T154KLD | Coilcraft Inc | HIGH TEMP POWER INDUCTOR General Purpose Inductor, 150uH, 10%, 1 Element, Ferrite-Core, SMD, 4747 RoHS : Compliant | 3,065 | |||
| BTB12600TWRG | STMicroelectronics | TRIAC RoHS : Not Compliant | 2,100 | |||
| SRR1260270M | Bourns Inc | General Purpose Inductor, 27uH, 20%, 1 Element, Ferrite-Core, SMD, 4949 RoHS : Compliant | 1,200 | |||
| MSD1260T104MLD | Coilcraft Inc | COUPLED INDUCTOR General Purpose Inductor, 100uH, 20%, 2 Element, Ferrite-Core, SMD, 4949 RoHS : Compliant | 500 | |||
| BTB12600BRG | STMicroelectronics | TRIAC RoHS : Not Compliant | 450 | |||
| STL21260GGG060U | MPE-Garry GmbH | Electronic Component RoHS : Compliant | 304 | |||
| BTA12600BRG | STMicroelectronics | 12 A STANDARD TRIAC 4 Quadrant Logic Level TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB RoHS : Compliant | 150 | |||
| FLE12601GDVAKTR | Samtec Inc | COST-EFFECTIVE RELIABLE SOCKET Board Connector, 52 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Black Insulator, Socket RoHS : Compliant | 125 | |||
| TPS61260DRVT | Texas Instruments | TINY LOW INPUT VOLTAGE BOOST CONVERTER Switching Controller, Current-mode, 0.1A, 2500kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 110 | |||
| BTB12600TW | STMicroelectronics | TRIAC, 600V V(DRM), 600V V(RRM), 12A I(T)RMS, TO-220AB RoHS : Not Compliant | 100 | |||
| BTA12600SW | STMicroelectronics | 12A LOGIC LEVEL TRIAC 4 Quadrant Logic Level TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB RoHS : Compliant | 100 | |||
| B126015BH | everflow | Blower Fan bw60x60x15 RoHS : Compliant | 77 | |||
| BTB12600BWRG | STMicroelectronics | TRIAC 600V 12A(RMS) 126A 3-Pin(3+Tab) TO-220AB Tube RoHS : Compliant | 50 | |||
 Interstate Connecting Components | 1260 | Heyco | SR 8P-2 BLACK |
| 5,482 | |
| 44A0111-26-0 | TE Connectivity | 44A0111-26-0 RoHS : Compliant | 0 | |||
| 202D163-12-60-0-CS5077 | TE Connectivity |
| 0 | |||
| A8504912609X | Amphenol PCD | M85049126-09X | 0 | |||
| YK2212603000G | Amphenol Anytek | YK-221-26P BLACK - SCREW NI-P | 0 | |||
| 67-03E12-60P | Amphenol Aerospace | 67 MINI 'E' RECEP | 0 | |||
| 455360-126-01 | TE Connectivity | 0 | ||||
| 43-12604 | Conec Corporation | SAL-12-DS5-2RK5.2-0,60,6K1 RoHS : Compliant | 0 | |||
| T1260103116-000 | TE Connectivity | H10B-TGBS-PG16 RoHS : Compliant |
| 0 | ||
| 11102126-00 | TE Connectivity | AST4000A00200P3B0000:CTO-13000 | 0 | |||
| 55A0121-26-0/9 | TE Connectivity | 55A0121-26-0/9 RoHS : Compliant |
| 0 | ||
| 6131-260-11149P | TE Connectivity | SHL RECP RoHS : Not Compliant | 0 | |||
| 4-1879126-0 | TE Connectivity | RN 0402 154R 0.1% 10PPM CUT LE RoHS : Compliant |
| 0 | ||
| 20012609-02 | TE Connectivity | PRESS XDCR M3239-000005-150PG | 0 | |||
| 455335-126-01 | TE Connectivity | OPT CON ASSY MC5 |
| 0 | ||
 NexGen Digital | MSS1260T-224KLD | Coilcraft Inc | RoHS : Compliant | 32 | ||
 PEI Genesis | 192922-1260 | ITT Interconnect Solutions | RoHS : Compliant |
| 97 | |
| 67-06C12-60P | Amphenol Corporation |
| 0 | |||
| 67-02E12-60S | Amphenol Corporation |
| 0 | |||
| 67-06P12-60SX | Amphenol Corporation |
| 0 | |||
| SF2912-6001 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| TJM212606 | Amphenol PCD |
| 0 | |||
| M85049/126-09A | Amphenol PCD |
| 0 | |||
| M39012/60-3001 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 67-06J12-60S | Amphenol Corporation |
| 0 | |||
SF2912-60955 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| TJM212602 | Amphenol PCD |
| 0 | |||
| 67-02E12-60P | Amphenol Corporation |
| 0 | |||
| 67-06P12-60S | Amphenol Corporation |
| 0 | |||
| 112606 | Amphenol RF |
| 0 | |||
| 67-06E12-60SX | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 1260 | Heyco | SR 8P-2 BLACK |
| 18,150 | |
| 126-060 | Bivar Inc | PERM-O-PADS, Square, TO-5 to TO-18, T-1 |
| 6,666 | ||
| 61126-050CAHLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,688 | ||
| MTMM-105-02-S-D-126-009 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 426 | ||
| 312605-000 | TE Connectivity | shrink tube RoHS : Not Compliant |
| 315 | ||
| CLT-126-02-F-D | Samtec Inc | Low Profile Tiger Eye Header Strips, 2.0 RoHS : Compliant |
| 178 | ||
| MTLW-126-07-G-D-016 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 152 | ||
| MTSW-126-07-G-D-000 | Samtec Inc | Connector Header RoHS : Compliant |
| 127 | ||
| MTSW-126-07-T-D-174 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 127 | ||
| MTSW-126-07-T-T-240 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 118 | ||
| SLM-126-01-G-D | Samtec Inc | Through-Hole Micro Socket, 0.050" x 0.10 RoHS : Compliant |
| 117 | ||
| FTS-126-02-F-D | Samtec Inc | Micro Tiger Eye Header Strip, 0.80 mm pi RoHS : Compliant |
| 81 | ||
| HTMS-126-01-T-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 59 | ||
| MTMM-126-05-L-D-200 | Samtec Inc | 2.00 mm Variable Post Height Terminal St RoHS : Compliant |
| 59 | ||
| MTMM-126-06-L-Q-070 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 46 | ||
 PUI | 12.60143 | 56,602 | ||||
| 12.60146 | 21,450 | |||||
| 12.60099 | 18,033 | |||||
| 12.60387 | 5,010 | |||||
| 12.60011 | 2,098 | |||||
| 12.60017 | 1,870 | |||||
| 12.60024 | 1,558 | |||||
| 12.60105 | 75 | |||||
| 12.60336 | 20 | |||||
| 12.60350 | 10 | |||||
| 12.60381 | 10 | |||||
| 12.60417 | 10 | |||||
| 12.60499 | 10 | |||||
| 12.60549 | 8 | |||||
| 12.60462 | 5 | |||||
 Richardson RFPD | CHE1260-QAG/20 | United Monolithic Semiconductors | BIDIRECTIONNAL DETECTOR 10-27GHZ RoHS : Compliant |
| 49 | |
| R948312600 | Radiall | Plug / plug stackable safety patch cord RoHS : Compliant | 0 | |||
| 126023 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 126020 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 126057 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| SI5335D-B12607-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| LT1260IS#PBF | Analog Devices Inc | Op Amp Triple High Speed Amplifier ±15V/30V 16-Pin RoHS : Compliant |
| 0 | ||
| 126006 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 126051 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 126088 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| R573112600 | Radiall | RF Switch SP6T 0MHz to 12.4GHz 60dB RoHS : Not Compliant |
| 0 | ||
| B39781B1260P810 | RF360 Holdings Singapore Pte Ltd | HQTCF CSSP3 DPLX GT RoHS : Compliant |
| 0 | ||
| DC1260A-B | Analog Devices Inc | LTC3539EDCB-2 DC to DC Converter and Switching Reg RoHS : Compliant |
| 0 | ||
| 126019 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 126064 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
 Rutronik | 087-2-010-0-F-XS0-1260 | MPE-Garry GmbH | 10P Pin Header 2R 2.54mm RoHS : Compliant |
| 39,000 | |
| STL1-1260GGT-003U | MPE-Garry GmbH | 03P Pin Header 1R STR THT 2.54mm RoHS : Compliant |
| 24,000 | ||
| STL2-1260GGT-006U | MPE-Garry GmbH | 06P Pin Header STR 2R RoHS : Compliant |
| 3,000 | ||
| STL2-1260GGT-020U | MPE-Garry GmbH | 20P Pin Header STR 2R THT 2.54mm RoHS : Compliant |
| 2,000 | ||
| 087-1-002-0-S-XS0-1260 | MPE-Garry GmbH | 02P Pin Header 2.54mm RoHS : Compliant |
| 2,000 | ||
| STL1-1260GGT-002U | MPE-Garry GmbH | 02P Pin Header 1R STR 2.54 RoHS : Compliant |
| 10 | ||
 Chip 1 Exchange | 12.60143 | Geyer Electronic E K | INSTOCK | 56,602 | ||
| 12.6011 | Geyer Electronic E K | INSTOCK | 21,944 | |||
| 12.60099 | Geyer Electronic E K | INSTOCK | 18,033 | |||
| 12.60387 | Geyer Electronic E K | INSTOCK | 5,010 | |||
| 12.60048 | Geyer Electronic E K | INSTOCK | 3,000 | |||
| 12.60011 | Geyer Electronic E K | INSTOCK | 2,098 | |||
| 12.60017 | Geyer Electronic E K | INSTOCK | 1,870 | |||
| SRR1260391K | INSTOCK | 163 | ||||
| CTA321-26.000-16-10/10/A | Aker Technology Company Ltd | INSTOCK | 89 | |||
| 12.60336 | Geyer Electronic E K | INSTOCK | 20 | |||
| 12.60381 | Geyer Electronic E K | INSTOCK | 10 | |||
| 12.60417 | Geyer Electronic E K | INSTOCK | 10 | |||
| 12.60499 | Geyer Electronic E K | INSTOCK | 10 | |||
| 12.60549 | Geyer Electronic E K | INSTOCK | 8 | |||
| 12.60462 | Geyer Electronic E K | INSTOCK | 5 | |||
 Avnet Abacus | 522071260 | Molex | FFC FPC Board Connector 1 mm 12 Contacts Receptacle EasyOn 52207 Surface Mount Top - Tape and Reel (Alt: 522071260) RoHS : Compliant | 63,000 | ||
| SRR1260-100M | Bourns Inc | - Tape and Reel (Alt: SRR1260-100M) RoHS : Compliant | 24,600 | |||
| HX1260FNLT | Pulse Electronics Corporation | Telecom Transformer 11 1500Vrms 11dB SMD - Tape and Reel (Alt: HX1260FNLT) RoHS : Compliant | 14,400 | |||
| SRR1260-330M | Bourns Inc | - Tape and Reel (Alt: SRR1260-330M) RoHS : Compliant | 3,600 | |||
| 1721260-5 | TE Connectivity | (Alt: 1721260-5) RoHS : Compliant | 3,000 | |||
| SRR1260-471K | Bourns Inc | - Tape and Reel (Alt: SRR1260-471K) RoHS : Compliant | 1,800 | |||
| 1061260790 | Molex | Conn Adaptor Fiber Optic FF ST (Alt: 1061260790) RoHS : Compliant | 1,400 | |||
| CLP-126-02-L-D | Samtec Inc | (Alt: CLP-126-02-L-D) RoHS : Compliant | 1,301 | |||
| G125-MH12605M4P | Harwin | - Tape and Reel (Alt: G125-MH12605M4P) RoHS : Compliant | 990 | |||
| CLP-126-02-L-D-K-TR | Samtec Inc | (Alt: CLP-126-02-L-D-K-TR) RoHS : Compliant | 795 | |||
| HX1260NLT | Pulse Electronics Corporation | Ethernet LAN Transformer 100 BaseTX 1 Port 06 350 H 15 kVrms Surface Mount - Tape and Reel (Alt: HX1260NLT) RoHS : Compliant | 600 | |||
| SRR1260-331K | Bourns Inc | - Tape and Reel (Alt: SRR1260-331K) RoHS : Compliant | 600 | |||
| SRR1260-270M | Bourns Inc | - Tape and Reel (Alt: SRR1260-270M) RoHS : Compliant | 600 | |||
| 12600-S-08 | 3M | Connector Accessories Jack Socket Screw Steel Nickel Finish (Alt: 7100001250) RoHS : Compliant | 400 | |||
| G125-MS12605L3P | Harwin | (Alt: G125-MS12605L3P) RoHS : Compliant | 10 | |||
Avnet Asia | MFBM1V2012-600-R | Eaton Corporation | (Alt: MFBM1V2012-600-R) RoHS : Compliant |
| 12,000 | |
| MFBW1V2012-600-R | Eaton Corporation | (Alt: MFBW1V2012-600-R) RoHS : Compliant |
| 4,000 | ||
| H1260NLT | Pulse Electronics Corporation | (Alt: H1260NLT) RoHS : Compliant |
| 600 | ||
| B322-1B7L1-11260-E100 | Amphenol Corporation | B322-1B7L1-11260-E100-FLOATING PLUG (Alt: B322-1B7L1-11260-E100) RoHS : Compliant |
| 40 | ||
| X1G004171012600 | Epson Electronics America Inc | (Alt: X1G004171012600) RoHS : Compliant | 0 | |||
| B39781B1260P810 | Qualcomm RFFE Filter Products | (Alt: B39781B1260P810) RoHS : Compliant | 0 | |||
| BD61260MUV-E2 | ROHM Semiconductor | SINGLE-PHASE FULL-WAVE FAN MOTOR PRE-DRI (Alt: BD61260MUV-E2) RoHS : Compliant | 0 | |||
| LY T676-Q2T1-26-0-20-R18-Z | ams OSRAM Group | (Alt: LY T676-Q2T1-26-0-20-R18-Z) RoHS : Compliant | 0 | |||
PTS181260V014 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 60 VDC, 140 mA, 340 mA, 0.2 s (Alt: PTS181260V014) RoHS : Compliant | 0 | |||
| BUK9K12-60EX | Nexperia | (Alt: BUK9K12-60EX) RoHS : Compliant | 0 | |||
| DDR514126007UD | Amphenol Corporation | DDR5,RDIMM,30U,BLACK+WHITE,287P (Alt: DDR514126007UD) RoHS : Compliant | 0 | |||
| DDR514126007UD | Amphenol Corporation | DDR5,RDIMM,30U,BLACK+WHITE,287P (Alt: DDR514126007UD) RoHS : Compliant | 0 | |||
| 1-1721260-3 | TE Connectivity | (Alt: 1-1721260-3) RoHS : Compliant | 0 | |||
| B329-1B7L1-11260-E100 | Amphenol Corporation | (Alt: B329-1B7L1-11260-E100) RoHS : Compliant | 0 | |||
BUK9M12-60EX | Nexperia | (Alt: BUK9M12-60EX) RoHS : Compliant | 0 | |||
 Avnet Silica | BTB12-600BWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600BWRG) RoHS : Compliant | 273,400 | ||
| BUK7M12-60EX | Nexperia | (Alt: BUK7M12-60EX) RoHS : Compliant | 217,500 | |||
| BTA12-600CWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600CWRG) RoHS : Compliant | 90,000 | |||
| BTA12-600TWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600TWRG) RoHS : Compliant | 50,300 | |||
| BTA12-600BRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600BRG) RoHS : Compliant | 37,200 | |||
| BUK9K12-60EX | Nexperia | (Alt: BUK9K12-60EX) RoHS : Compliant | 30,000 | |||
| BTB12-600BRG | STMicroelectronics | Triac 600 V 12 A TO220AB 13 V 120 A 50 mA (Alt: BTB12-600BRG) RoHS : Compliant | 12,500 | |||
| BTA12-600SWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600SWRG) RoHS : Compliant | 6,200 | |||
| BTB12-600CRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600CRG) RoHS : Compliant | 6,000 | |||
| BTA212-600B/DG,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 105A 3Pin3Tab TO220AB Tube (Alt: BTA212-600B/DG,127) RoHS : Compliant | 5,000 | |||
| BTB12-600SWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600SWRG) RoHS : Compliant | 4,750 | |||
| BTB12-600TWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600TWRG) RoHS : Compliant | 4,650 | |||
| BTA12-600CRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Isolated Tube (Alt: BTA12-600CRG) RoHS : Compliant | 4,000 | |||
| BTA312-600B,127 | WeEn Semiconductor Co Ltd | (Alt: BTA312-600B,127) RoHS : Compliant | 4,000 | |||
| DMN1260UFA-7B | Diodes Incorporated | (Alt: DMN1260UFA-7B) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | TMCM-1260-CABLE | Analog Devices Inc | TMCM-1260-CABLE |
| 1 | |
ABM11-141-26.000MHZ-T3 | Abracon Corporation | CRYSTAL 26.00MHZ 8PF LOW ESR SMD RoHS : Compliant |
| 0 | ||
| ABM11-26.000MHZ-D2X-T3 | Abracon Corporation | CRYSTAL 26.0000MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| ACMP-Q1260-701-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACMP-Q1260-102-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ABM11-26.000MHZ-12-B7G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AOCJY1-26.000MHZ | Abracon Corporation | XTAL OSC VCOCXO 26.0000MHZ CMOS RoHS : Compliant |
| 0 | ||
| ABM11-26.000MHZ-B7G-T | Abracon Corporation | CRYSTAL 26.0000MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| ABM11-26.000MHZ-B1U-T | Abracon Corporation | CRYSTAL 26.0000MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| X10CB1-26.000MHZ-T | Abracon Corporation | Miniature Crystal SMD, Ceramic, 26.000MHZ, 10pf, 15ppm @ 25C, 30ppm -20+70C, 2.5 X 2.0 X .55mm (4 pad) RoHS : Compliant |
| 0 | ||
| NORA-B126-00B | u-blox AG | Bluetooth Low Energy Module, stand-alone, pcb antenna, open CPU 10.4x14.3 mm, 500 pcs/reel RoHS : Compliant |
| 0 | ||
ASTX-H11-26.000MHZ-I25-T | Abracon Corporation | XTAL OSC TCXO 26.0000MHZ HCMOS RoHS : Compliant |
| 0 | ||
| ASTX-H11-26.000MHZ-T | Abracon Corporation | XTAL OSC TCXO 26.0000MHZ HCMOS RoHS : Compliant |
| 0 | ||
| ASFL1-26.000MHZ-L-T | Abracon Corporation | XTAL OSC XO 26.000MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
| WH-PV612-600 | Nipron Co |
| 0 | |||
 Component Electronics, Inc | PZ90527-3126-01F | Foxconn | IN STOCK SHIP TODAY | 613 | ||
| MSS1260T-154KLD | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 443 | ||
| SRR1260-100M | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 435 | ||
| MTSW-126-07-T-D-174 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 223 | ||
| 812-6002-118 | Spectra Symbol | IN STOCK SHIP TODAY | 115 | |||
| FPS-012-6024-BLK | IN STOCK SHIP TODAY |
| 89 | |||
| 4101-26-01-P5 | H&T Global Circuits | IN STOCK SHIP TODAY | 88 | |||
| 112603RP | Amphenol Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
| 1712600000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
| SRR1260-150M | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| 0241260000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| M39012/60-3001 | Solitron Devices Inc | IN STOCK SHIP TODAY |
| 5 | ||
| 12609-160 | PerkinElmer Inc | IN STOCK SHIP TODAY | 3 | |||
| 41260 | Pico Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| MM126037 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | E3-126-065 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic |
| 18 | |
| 1260 | Heyco | SR 8P-2 BLACK | 0 | |||
| R4-10-12-601-20 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
| E3-1260-1112 | Southco | E3-1260-1112 | 0 | |||
| 47-12-604-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| M1260-2545-B-5 | RAF Electronic Hardware | 0 | ||||
| 12606 | Heyco | HSTM46-M15 NATURAL | 0 | |||
| 12606 | Essentra Components | 0 | ||||
| E3-126-035 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-126-0459 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-126-080 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| M1260-2545-N | RAF Electronic Hardware | 0 | ||||
| E3-126-085 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-126-0959 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1260-0712 | Southco | E3-1260-0712 | 0 | |||
 EBV Elektronik | LYT676-R1T1-26-0-20-R18-Z | ams OSRAM Group | LED Single Chip Yellow 595nm 30mA 2Pin PLCC TR (Alt: Q65112A2199) RoHS : Compliant | 124,000 | ||
| BTA12-600BWRG | STMicroelectronics | Triac 600 V 12 A 13 V 50 mA ITO220AB 3 Pins (Alt: BTA12-600BWRG) RoHS : Compliant | 20,400 | |||
| BTA12-600BRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600BRG) RoHS : Compliant | 14,450 | |||
| BTA12-600SWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600SWRG) RoHS : Compliant | 11,500 | |||
| BTB12-600BWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600BWRG) RoHS : Compliant | 4,900 | |||
| BTA212-600B,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 105A 3Pin3Tab TO220AB Tube (Alt: BTA212-600B,127) RoHS : Compliant | 4,000 | |||
| BTA12-600TWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600TWRG) RoHS : Compliant | 1,400 | |||
| C12606_LENINA-DL | LEDIL | Round Lens For LED Polycarbonate (Alt: C12606_LENINA-DL) RoHS : Compliant | 1,260 | |||
| BTA12-600CRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Isolated Tube (Alt: BTA12-600CRG) RoHS : Compliant | 900 | |||
| BTA12-600CWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Insulated Tube (Alt: BTA12-600CWRG) RoHS : Compliant | 800 | |||
| BTB12-600CWRG | STMicroelectronics | Thyristor TRIAC 600V 126A 3Pin3Tab TO220AB Tube (Alt: BTB12-600CWRG) RoHS : Compliant | 300 | |||
| BTA212-600F,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 105A 3Pin3Tab TO220AB Tube (Alt: BTA212-600F,127) RoHS : Compliant | 0 | |||
| BTA312-600C,127 | WeEn Semiconductor Co Ltd | Thyristor TRIAC 600V 105A 3Pin3Tab TO220AB Tube (Alt: BTA312-600C,127) RoHS : Compliant | 0 | |||
| BTA312-600D/DG,127 | WeEn Semiconductor Co Ltd | BTA312600DDGSIL3PSTANDARD 12NC 934065983127 (Alt: BTA312-600D/DG,127) RoHS : Compliant | 0 | |||
| CD8069504212601S RFB9 | Intel Corporation | (Alt: 999CM1) RoHS : Compliant | 0 | |||
 FDH Electronics | M22759/11-26-0/2-.250" | Whitmore/Wirenetics | Wire and Cable | 32,094 | ||
| M22759/11-26-05 | Whitmore/Wirenetics | Wire and Cable | 32,094 | |||
| M22759/11-26-06 | Whitmore/Wirenetics | Wire and Cable | 32,094 | |||
| M22759/21-26-0 | Quirk Wire Inc | Wire and Cable | 875 | |||
| 1020880-1260CH | Aptiv PLC | Connector Acc |
| 387 | ||
| CA-512B512-60 | ELECTRO ENTERPRISES INC | Data Bus | 44 | |||
| S-12606 | FDH Electronics | Supplies - ESG | 20 | |||
| XOS29504-5SM-2200-1260C2K | Xioptics LLC | Customer Suppli | 6 | |||
| ST5M1260B10-35 | Amphenol Aerospace | Circular Conn |
| 3 | ||
| 012600-2068 | Smiths Interconnect | Connector |
| 0 | ||
| 455616-126-01 | TE Connectivity | Connector Acc RoHS : Not Compliant |
| 0 | ||
| SF2912-6001 | Amphenol SV Microwave | Connector RoHS : Compliant | 0 | |||
| TJM212606 | Amphenol PCD | Module | 0 | |||
| M85049/126-09A | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/126-09A | Glenair Inc | Connector RoHS : Compliant | 0 | |||
 Flip Electronics | NTS1260MFST1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 72,000 | |
| NRTS1260PFST3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,000 | ||
| NSS12601CF8T1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,888 | ||
| NLA12512H12600B1 | Broadcom Limited | Stock, Ship Today |
| 23 | ||
 Maritex | 2SB1260G-Q-AB3-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); 2SB1260G-Q-AB3-R; UTC; 80 V; 1 A RoHS : Compliant |
| 2,827 | |
| ESF2012601YLB | ABC Taiwan Electronics Corp | Common Mode Filters; ESF2012601YLB; ABC TAIWAN ELECTRONICS |
| 2,000 | ||
| BTA12-600BRG | STMicroelectronics | Thyristors & SCRs; BTA12-600BRG; STMICROELECTRONICS; TO-220AB; Through Hole; 12 A; No RoHS : Compliant |
| 300 | ||
| CSFA101-2602A001B1AC | Greenconn Corp | Pin Header; pitch 2.00mm; 1x26 pins; assembly: THT; female; straight; single row |
| 287 | ||
 Master Electronics | 1260 | Heyco | SR 8P-2 BLACK Heyco® Original Strain Relief Bushings Straight-thru for Round Cables RoHS : Compliant |
| 110 | |
| MMS-126-01-F-DV | Samtec Inc | 2.00 mm Tiger Claw™ Socket Strip RoHS : Compliant |
| 0 | ||
| MMS-126-02-L-DV-A-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMS-126-02-LTL-DV-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMT-126-01-L-SH-K | Samtec Inc | 2.00 mm Horizontal Surface Mount Terminal Strip RoHS : Compliant |
| 0 | ||
| MMT-126-01-L-SV-LC | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PTT-126-01-L-Q-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PTT-126-01-S-D-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PTT-126-01-S-T | Samtec Inc | 2.00 mm Press-Fit Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-05-G-S-110 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-05-L-S-175 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-126-06-F-S-145 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-07-F-D-280 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-07-G-D-016 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-126-07-L-S-265 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W02012-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Female 4 Hole Flange Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N female 4 hole flange low loss cable 60 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female 4 hole flange low loss cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N 4 hole flange cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W02012-60, can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W02012-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to N type female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02012-60 can also be used in the other direction and will be type N female 4 hole flange to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female 4 hole flange low loss cable 60 inch length using LMR-195 coax. |
| 765 | |
| PE3C0112-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male With Times Connectors Cable 60 Inch Length Using LMR-600 Coax., Radio frequency assembly N male to N male with times connectors cable 60 inch length using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male with times connectors cable 60 inch length using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0112-60, can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0112-60 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male with times connectors cable 60 inch length using LMR-600 coax. |
| 756 | ||
| PE3C3412-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. Reverse Polarity SMA Male to BNC Male Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly reverse polarity SMA male to BNC male cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to BNC male cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and BNC cable connection on the other. Our reverse polarity SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to BNC cable is a male to male coax assembly, PE3C3412-60, can also be known as a reverse polarity SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to BNC plug cable assembly PE3C3412-60 is built with RG188 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3412-60 can also be used in the other direction and will be BNC male to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to BNC male cable 60 inch length using RG188 coax. |
| 409 | ||
| PE33412-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Right Angle Cable 60 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male right angle cable 60 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male right angle cable 60 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33412-60, can also be known as a BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33412-60 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33412-60 can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male right angle cable 60 inch length using 75 Ohm RG179 coax. |
| 333 | ||
| PE3612-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm N Male to 75 Ohm N Male Cable 60 Inch Length Using 75 Ohm RG6 Coax., Radio frequency assembly 75 Ohm N male to 75 Ohm N male cable 60 inch length using 75 Ohm RG6 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm N male to 75 Ohm N male cable 60 inch length using 75 Ohm RG6 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3612-60, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3612-60 is built with RG6 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 1.5 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm N male cable 60 inch length using 75 Ohm RG6 coax. |
| 100 | ||
| PE3W14012-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMA Male Right Angle Cable 60 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SSMA male right angle cable 60 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMA male right angle cable 60 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SSMA cable connection on the other. Our SMA to right angle SSMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14012-60 can also be known as a SMA plug to right angle SSMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W14012-60 RF cable has a PTFE jacket of 0.118-inch diameter. The flexible RF cable has a between series connection. SMA plug to SSMA plug cable assembly PE3W14012-60 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14012-60 can also be used in the other direction and will be a right angle SSMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA and SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMA RF cable assembly as per your requirements. |
| 71 | ||
| PE3W08912-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Plug Bulkhead Cable 60 Inch Length Using RG402 Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 60 inch length using RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 60 inch length using RG402 coax, BMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA bulkhead cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and plug on end 2. PE3W08912-60 can also be known as a BMA male to BMA male cable assembly and will be shipped same-day as it is purchased. BMA male to BMA male cable assembly PE3W08912-60 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA plug bulkhead to BMA plug bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA male bulkhead to BMA male bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 60 inch length using RG402 coax. |
| 23 | ||
| PE3C4912-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to N Male Cable 60 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable 60 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable 60 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a plug gender on end 1 and male on end 2. This BMA to type N cable is a plug to male coax assembly, PE3C4912-60, can also be known as a BMA male to type N plug cable assembly and will be shipped same-day as it is purchased. BMA male to N type plug cable assembly PE3C4912-60 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA plug bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4912-60 can also be used in the other direction and will be N type male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable 60 inch length using PE-SR402FLJ coax. |
| 14 | ||
| PE3W12604 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to N Female Cable Using RG405 Coax. PE3W12604 is a MCX plug right angle to N female cable using RG405 coax. This Pasternack MCX plug right angle to N female cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm N for connector 2. MCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to female N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12604 MCX plug right angle to N female cable assembly is constructed with RG405 coax. | 0 | |||
| PE3512-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Right Angle Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMA male right angle cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512-60, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512-60 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 60 inch length using RG142 coax. |
| 0 | ||
| PE3C11112-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-60 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-60 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01260/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01260/HS-36 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01260/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3W01260/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01260/HS-36 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12606LF/HS | Pasternack Enterprises | 0 | ||||
| PE3M0012-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 N Female to N Female Bulkhead Cable 60 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/03-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 N type cable connection on one end and M39012/03-0503 N type bulkhead cable connection on the other. Our M39012/02-0503 type N to M39012/03-0503 type N cable assemblies have a female gender on end 1 and female on end 2. This M39012/02-0503 type N to M39012/03-0503 type N cable is a female to female coax assembly, PE3M0012-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 N type jack to M39012/03-0503 type N jack cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 N type jack to M39012/03-0503 type N jack cable assembly PE3M0012-60 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 N type female to M39012/03-0503 N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0012-60 can also be used in the other direction and will be M39012/03-0503 type N female bulkhead to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 N type jack to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/03-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax. |
| 0 | ||
| PE3W12607LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. TNC Male to BNC Male Cable Using LMR-100A-UF Coax, LF Solder. PE3W12607LF is a TNC male to BNC male cable using LMR-100A-UF coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12607LF TNC male to BNC male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 TE Connectivity | 4-641126-0 | TE Connectivity | 10P MTA100 HDR ASY FL/STR LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header: Polter & Vertical & Unshrouded & Mating Alignment | Part Number: 4-641126-0 | Internal Number: 4-641126-0 | TE Connectivity RoHS : Compliant |
| 1,258 | |
| DRB12-60PBE-L018 | TE Connectivity | REC, 60P, BLK, E, CAP, B Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 60 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm 1.59 mm Deutsch Drb Housing | 12 V 60 | Part Number: DRB12-60PBE-L018 | Internal Number: DRB12-60PBE-L018 | Alias Number: ZPF000000000131374 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 69 | ||
| T1260102116-000 | TE Connectivity | H10B-TGB-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260102116-000 | Internal Number: T1260102116-000 | TE Connectivity RoHS : Compliant |
| 50 | ||
| 212608-1 | TE Connectivity | PLUG HSG,4 POSN,METRIMATE Number of Positions: 4 Connector & Housing Type: Plug Connector Product Type: Housing Connector System: Wire-to-Panel Wire-to-Board Wire-to-Wire UL Flammability Rating: UL 94V-0 Standard Rectangular Connector | 4 Plug Housing Wire-to-Panel | Part Number: 212608-1 | Internal Number: 212608-1 | TE Connectivity RoHS : Compliant |
| 50 | ||
| 1011-260-0305 | TE Connectivity | BKSHL, 3P, BLK, PLG,RA,SR,NW6/7.5/8.5/10 Number of Positions: 3 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: Nylon 6/6 Cable Exit Angle: 90 ° Deutsch Dt Backshell | 3 Black Backshell Nylon 6/6 | Part Number: 1011-260-0305 | Internal Number: 1011-260-0305 | Alias Number: ZPF000000000131543 | TE Connectivity RoHS : Compliant |
| 50 | ||
| T1260102120-000 | TE Connectivity | H10B-TGB-M20 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260102120-000 | Internal Number: T1260102120-000 | TE Connectivity RoHS : Compliant |
| 28 | ||
| T1260162125-000 | TE Connectivity | H16B-TGB-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260162125-000 | Internal Number: T1260162125-000 | TE Connectivity RoHS : Compliant |
| 27 | ||
| T1260242125-000 | TE Connectivity | H24B-TGB-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260242125-000 | Internal Number: T1260242125-000 | TE Connectivity RoHS : Compliant |
| 22 | ||
| T1260242121-000 | TE Connectivity | H24B-TGB-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260242121-000 | Internal Number: T1260242121-000 | TE Connectivity RoHS : Compliant |
| 22 | ||
| T1260162132-000 | TE Connectivity | H16B-TGB-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260162132-000 | Internal Number: T1260162132-000 | TE Connectivity RoHS : Compliant |
| 22 | ||
| T1260103125-000 | TE Connectivity | H10B-TGBS-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260103125-000 | Internal Number: T1260103125-000 | TE Connectivity RoHS : Compliant |
| 21 | ||
| T1260163121-000 | TE Connectivity | H16B-TGBS-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1260163121-000 | Internal Number: T1260163121-000 | TE Connectivity RoHS : Compliant |
| 19 | ||
 Venkel Ltd. | TFCR0402-16W-C-1260FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;126R;�1% RoHS : Compliant | 0 | ||
| TFCR1206-8W-K-1260FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;126R;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1260CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;126R;�0.25% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1260DT | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;126R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-1260CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;126R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-1260AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;126R;�0.05% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1260DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;126R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-1260DT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;126R;�0.5% RoHS : Compliant | 0 | |||
| SHPI121260S-4R4MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;4.4uH;�20% RoHS : Compliant | 0 | |||
| UPTF1206-8W-E-1260AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;25PPM;126R;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1260CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;126R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-1260DT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;126R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-1260FT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;126R;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-K-1260DT | VENKEL LTD | Thin Film CR;2010;1/4W;�100PPM;126R;�0.5% RoHS : Compliant | 0 | |||
| SHPI121260S-7R5MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;7.5uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | LT1260IS-TRPBF | Analog Devices Inc | 11,717 | |||
M27C512-60XN6 | STMicroelectronics | RoHS : Not Compliant | 9,520 | |||
| 55A0121-26-0/9 | TE Connectivity | Wire And Cable, 2 Conductor(s), 26AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,761 | |||
| M27C512-60XN6X | STMicroelectronics | RoHS : Not Compliant | 7,815 | |||
| M38510/12603BVA | Texas Instruments | Switching Controller, 0.2A, 350kHz Switching Freq-Max, CDIP18 | 7,347 | |||
| NTS1260MFST3G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 12A, 60V V(RRM), Silicon RoHS : Compliant | 6,860 | |||
| M27C512-60N6TR | STMicroelectronics | RoHS : Not Compliant | 6,539 | |||
| SRR1260A-681K | Bourns Inc | General Purpose Inductor, 680uH, 10%, 1 Element, Ferrite-Core, SMD, 4949 RoHS : Compliant | 5,982 | |||
| H1260NL | NXP Semiconductors | Datacom Transformer, 10/100 BASE-TX; ETHERNET Application(s), 1:1 | 5,834 | |||
ADS1260BIRHBR | Texas Instruments | ADC, Delta-Sigma, 24-Bit, 1 Func, 5 Channel, Serial Access, PQCC32 RoHS : Compliant | 5,796 | |||
SCAN921260UJBX | Texas Instruments | Line Receiver, 6 Func, 6 Rcvr, CMOS, PBGA196 RoHS : Not Compliant | 5,082 | |||
BTA312-600D/DG,127 | NXP Semiconductors | TRIAC, 600V V(DRM), 12A I(T)RMS RoHS : Compliant | 4,657 | |||
M27C512-60C6 | STMicroelectronics | RoHS : Not Compliant | 3,857 | |||
| BTB12-600CW3G | onsemi | 4 Quadrant Logic Level TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB RoHS : Compliant | 2,357 | |||
| LT1260IS#PBF | Linear Technology | Operational Amplifier, 3 Func, 16000uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 657 | |||
 Waytek, Inc. | 63811-2600 | Molex | Crimp Tool 33000 Series 22-18GA 63811-2600 RoHS : Compliant |
| 7 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British