15013-R2 Price, Distributor, Stock

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MMCX Plug to BNC Female Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly MMCX plug to BNC female low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to BNC female low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with MMCX cable connection on one end and BNC cable connection on the other. Our low loss MMCX to BNC cable assemblies have a plug gender on end 1 and female on end 2. PE3C1150-100CM can also be known as a low loss MMCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. MMCX male to BNC jack cable assembly PE3C1150-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency MMCX plug to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1150-100CM can also be used in the other direction and will be BNC female to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to BNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to BNC female low loss cable 100 cm length using LMR-100 coax.

1 : $64.19
25 : $60.98
50 : $57.77
100 : $55.2

PE3W15012LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to SMA Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE3W15012LF/HS is a D-Sub receptacle to SMA male cable using RG141 coax. This Pasternack D-Sub receptacle to SMA male cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm SMA for connector 2. Our receptacle D-Sub to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15012LF/HS D-Sub receptacle to SMA male cable assembly is constructed with RG141 coax.

PE3C1501LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to 3.5mm Male Cable Using PE-SR405FLJ Coax, LF Solder. PE3C1501LF is a SMP female right angle to 3.5mm male cable using PE-SR405FLJ coax. This Pasternack SMP female right angle to 3.5mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 3.5mm for connector 2. SMP right angle to 3.5mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1501LF SMP female right angle to 3.5mm male cable assembly is constructed with PE-SR405FLJ coax.

PE3W15010/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Cable Using LMR-240-FR Coax with HeatShrink. PE3W15010/HS is a TNC male to TNC female cable using LMR-240-FR coax. This Pasternack TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15010/HS TNC male to TNC female cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W11501

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Female to MMCX Plug Cable Using LMR-100 Coax. PE3W11501 is a reverse thread SMA female to MMCX plug cable using LMR-100A coax. This Pasternack reverse thread SMA female to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our reverse thread female SMA to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11501 SMA reverse thread female to MMCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE36150-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMP Female to SMP Female Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly SMP female to SMP female cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMP female cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE36150-12, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE36150-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMP female cable 12 inch length using RG405 coax.

1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29

PE3W15015

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Black FAKRA Jack Right Angle to SMA Female Bulkhead Cable Using RG174 Coax. PE3W15015 is a FAKRA jack right angle to SMA female bulkhead cable using RG174 coax. This Pasternack FAKRA jack right angle to SMA female bulkhead cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. FAKRA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15015 FAKRA jack right angle to SMA female bulkhead cable assembly is constructed with RG174 coax.

PE3W15014

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG174 Coax. PE3W15014 is a SMA male to SMA female bulkhead cable using RG174 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15014 SMA male to SMA female bulkhead cable assembly is constructed with RG174 coax.

PE3W15018

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. Snap-On 4.3-10 Male to NEX10 Male Cable Using SPO-250 Coax. PE3W15018 is a 4.3-10 male to NEX10 male cable using SPO-250 coax. This Pasternack 4.3-10 male to NEX10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm NEX10 for connector 2. Our male 4.3-10 to male NEX10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W15018 4.3-10 male to NEX10 male cable assembly is constructed with SPO-250 coax.

PE3W15014/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG174 Coax with HeatShrink. PE3W15014/HS is a SMA male to SMA female bulkhead cable using RG174 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15014/HS SMA male to SMA female bulkhead cable assembly is constructed with RG174 coax.

PE34150-18

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR401FL Coax., Radio frequency assembly N male to N female bulkhead cable 18 inch length using PE-SR401FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 18 inch length using PE-SR401FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE34150-18, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE34150-18 is built with PE-SR401FL which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34150-18 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 18 inch length using PE-SR401FL coax.

1 : $139.99
25 : $132.99
50 : $125.99

PE7AP150-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Power Maximum: 150 Watt, VSWR Maximum: 1.5:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Male to N Female Directional Black Anodized Aluminum Heatsink Body Rated to 150 Watts Up to 8 GHz. PE7AP150-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7AP150-10 10 dB attenuator is rated for up to 8 GHz. Our microwave attenuator is rated to 150 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP150-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $759.99
5 : $729.59
10 : $699.19

PE3M0150-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Temperature Conditioned SMA Female Bulkhead to N Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0150-12 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and type N connection on the other. Our low loss SMA to N type cable assemblies have a female gender on end 1 and female on end 2. This SMA to type N cable is a female to female coax assembly. PE3M0150-12 can also be known as a temperature conditioned low loss SMA jack to N type jack cable assembly and will be shipped the same day after it is purchased. SMA jack to type N jack cable assembly PE3M0150-12 is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA female to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0150-12 can be used in the other direction and will be N type female to SMA female cable assembly. Pasternack high reliability low loss SMA jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for same-day shipment worldwide. Variations of PE45525 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P142LL coax.

1 : $914.99
25 : $869.24
50 : $823.49
100 : $786.89

PE3W15011LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. D-Sub Plug to SMA Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE3W15011LF/HS is a D-Sub plug to SMA male cable using RG141 coax. This Pasternack D-Sub plug to SMA male cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm SMA for connector 2. Our plug D-Sub to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15011LF/HS D-Sub plug to SMA male cable assembly is constructed with RG141 coax.

PE3W15019

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. 4.3-10 Male to NEX10 Male Cable Using SPO-250 Coax. PE3W15019 is a 4.3-10 male to NEX10 male cable using SPO-250 coax. This Pasternack 4.3-10 male to NEX10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm NEX10 for connector 2. Our male 4.3-10 to male NEX10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W15019 4.3-10 male to NEX10 male cable assembly is constructed with SPO-250 coax.

Teledyne HiRel

5962-8951501XA

Teledyne HiRel

COUNTER/TIMER UNIT, 6.17 MHZ
RoHS : Not Compliant

5962-89815013C

Teledyne HiRel

PROM UV ERASABLE 2K X 8 REGISTERED 35 NS

7901501FA

Teledyne HiRel

ANALOG MULTIPLEXER/DEMULTIPLEXER, 4-CHANNEL DIFFERENTIAL
RoHS : Not Compliant

5962-87515013C

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 45 NS ACCESS TIME

5962-87615012A

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-8761501DA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-89815013A

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8751501JA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

5962-8981501KA

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9071501MUA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9961501QYA

Teledyne HiRel

MEMORY, 64K X 9 CASCADABLE FIFO, 25 NS ACCESS
RoHS : Not Compliant

5962-9221501M2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH ASYNCHRONOUS MASTER RESET, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9071501MXA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9071501MZA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-87515013A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-RZ-1501FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;1.5K;�1%
RoHS : Compliant

MELFC0102-UC-1501DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;1.5K;�0.5%
RoHS : Compliant

MELFC0207-XZ-1501FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;1.5K;�1%
RoHS : Compliant

UPTF0805-10W-P-1501AT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.5K;�0.05%
RoHS : Compliant

UPTF0805-10W-P-1501DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.5K;�0.5%
RoHS : Compliant

UPTF1206-8W-P-1501AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;1.5K;�0.05%
RoHS : Compliant

HPTF0805-RN-1501UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;1.5K;�0.01%
RoHS : Compliant

HPTF1210-UP-1501AT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�5PPM;1.5K;�0.05%
RoHS : Compliant

HPTF2512-WN-1501UT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�10PPM;1.5K;�0.01%
RoHS : Compliant

PWCR0603-QK-1501DT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;1.5K;�0.5%
RoHS : Compliant

PWCR2512-JK-1501FT

VENKEL LTD

Pulse Withstanding CR;2512;2W;�100PPM;1.5K;�1%
RoHS : Compliant

MELFC0204-ZN-1501FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;1.5K;�1%
RoHS : Compliant

MELFC0204-ZP-1501BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;1.5K;�0.1%
RoHS : Compliant

MELFC0207-VC-1501BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;1.5K;�0.1%
RoHS : Compliant

UPTF0603-16W-N-1501DT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;1.5K;�0.5%
RoHS : Compliant

Waytek, Inc.

1600-037-150-15

15A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $4.24
50 : $3.55
100 : $3.11
200 : $2.91
500 : $2.79

534

151-01501

HellermannTyton

HellermannTyton 151-01501 adjustable ratchet clamp is a reusable bundle-mounting clamp designed to secure wire, cable, hose, or tubing with controlled tension. Its adjustable ratchet design supports serviceability, cleaner routing, and stable retention in vehicle and equipment applications.
RoHS : Compliant

1 : $5.8997
50 : $5.2572
100 : $4.7704
200 : $4.6146
500 : $4.4589
1,000 : $4.2836

306

PC7150-1C-C2-12C-N-X

Picker Components

Maxi ISO Relay 12V SPDT 150A NO 100A NC Bracket CONNECTOR 75281

1 : $25.43
10 : $22.99
50 : $21.21
100 : $19.41
200 : $18.07
500 : $16.8

260

1800-E1-1-2E-0150-12

15A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.2
100 : $15.37
200 : $14.64

127

974-2415-010-09