1610TF-R24M-R Price, Distributor, Stock

Multiphase synchronous controller optimized with PWMVID and I2C Interfacefor new generation computing and graphics processors (Alt: NCP81610MNTXG)
RoHS : Compliant

JN5161/001,518

NXP Semiconductors

MCU 32bit JN516x RISC 64KB Flash 40Pin HVQFN EP TR (Alt: JN5161/001,518)
RoHS : Compliant

JN5161/001,515

NXP Semiconductors

MCU 32bit JN516x RISC 64KB Flash 40Pin HVQFN EP TR (Alt: JN5161/001,515)
RoHS : Compliant

MCP6N16-100E/MS

Microchip Technology Inc

SP Amp INSTR Amp Single RR IO 55V 8Pin MSOP Tube (Alt: MCP6N16-100E/MS)
RoHS : Compliant

PXE1610CDNG003XTMA1

Infineon Technologies AG

(Alt: SP001599590)
RoHS : Compliant

CP16108_CARMEN-50-M-C

LEDIL

Lens with Holder Carmen Family Round PMMA 50mm Dia (Alt: CP16108_CARMEN-50-M-C)
RoHS : Compliant

CP16107_CARMEN-50-S-C

LEDIL

ASSEMBLYROUND1 POS50MM D2545MMH (Alt: CP16107_CARMEN-50-S-C)
RoHS : Compliant

CP16106_CARMEN-50-RS-C

LEDIL

Assemblyround1 Pos50mm D2545mmH (Alt: CP16106_CARMEN-50-RS-C)
RoHS : Compliant

ECCO

CA3106F16-10S

ITT Interconnect Solutions

RoHS : Not Compliant

13 : $79.97

241

MS3456W16-10SX-LC

Aero-Electric Connector Inc

RoHS : Not Compliant

141

AE556W16-10SW-LC

Aero-Electric Connector Inc

141

97-3106A-16-10P(946)

Amphenol Industrial Operations

1 : $26.49

108

AE550W16-10SW-LC

Aero-Electric Connector Inc

RoHS : Not Compliant

AE556L16-10AX

Aero-Electric Connector Inc

AE556W16-10AW

Aero-Electric Connector Inc

AE556L16-10PX-01

Aero-Electric Connector Inc

MS3456W16-10AX

Aero-Electric Connector Inc

AE550W16-10SW-01

Aero-Electric Connector Inc

AE556L16-10PW

Aero-Electric Connector Inc

RoHS : Compliant

AE550W16-10S-LC

Aero-Electric Connector Inc

RoHS : Not Compliant

AE550L16-10PY-01

Aero-Electric Connector Inc

AE83372R1610N

Aero-Electric Connector Inc

RoHS : Compliant

AE551W16-10AW

Aero-Electric Connector Inc

Flip Electronics

JN5161/001,515

NXP Semiconductors

Stock
RoHS : Compliant

6,953

JN5161/001,518

NXP Semiconductors

Stock
RoHS : Compliant

3,995

NCP81610MNTXG

onsemi

Stock, Ship Today
RoHS : Compliant

2,804

Maritex

559171610

Molex

Male Pin Headers; 559171610; MOLEX; 2; Tin; 16; Vertical
RoHS : Compliant

4,800 : $0.168
300 : $0.198
100 : $0.208
30 : $0.26
10 : $0.342
1 : $0.4496

8,631

M1610B-5-10-1-LN

BEISIT

nylon cable gland M16x1.5 5-10.0mm with locknut and flat gasket

1,000 : $0.473
500 : $0.513
100 : $0.523
10 : $0.584
1 : $0.621

2,754

CP-01416100

Cvilux Corporation

Header for PCB; pitch 4.20mm; 16-contacts [2x8]; THT; male; side entry; 2 rows; 300V/9A
RoHS : Compliant

240 : $0.281
48 : $0.313
10 : $0.347
1 : $0.379

1,133

CKFA216-1070A010A1AB W S/R

Greenconn Corp

IDC connector; pitch 2.00mm; 20-contacts; female; for ribbon cable AWG#26-#28

1,200 : $0.41
360 : $0.46
120 : $0.486
20 : $0.55
1 : $0.623

665

CP16108_CARMEN-50-M-C

LEDIL

Lens LEDIL CP16108_CARMEN-50-M-C with holder

2,520 : $2.062
1,008 : $2.088
504 : $2.132
112 : $2.564
10 : $3.268
1 : $4.599

239

RNP18-PK1016-103K

RDA Microelectronics

Inductor: wire; THT; 10000uH; 0.35A; 10R; 11.5x17.5mm; 10%

1,000 : $0.25
100 : $0.402
10 : $0.542
1 : $1.052

100

1-292161-0

TE Connectivity

Circular Connectors; 1-292161-0; TE CONNECTIVITY; 10; Natural; Nylon; 10
RoHS : Compliant

500 : $0.471
300 : $0.51
100 : $0.55
30 : $0.723
10 : $0.936
1 : $1.1833

C01610G00600012

Amphenol Tuchel

Socket ECOMATE C016 series, 7 pins (6+PE), female, straight, 13A, 250V, cable: 0.14-1.5mm2( AWG26-16), contact plating: silver plated, solder, IP67

2,000 : $2.882
750 : $2.966
250 : $3.347
100 : $3.489
50 : $3.892
1 : $4.538

CP16106_CARMEN-50-RS-C

LEDIL

Lens LEDIL CP16106_CARMEN-50-RS-C with holder

2,520 : $1.946
1,008 : $1.972
504 : $2.264
112 : $2.538
10 : $2.89
1 : $4.333

C01610D00601010

Amphenol Tuchel

Plug ECOMATE C016 series, 7 pins (6+PE), female, straight, 13A, 250V, cable: 0.14-1.5mm2( AWG26-16), contacts sold separately, crimp, colour: black - blue IP67

20 : $5.088
10 : $5.83
5 : $7.192
1 : $8.002

M1610-5-10-LN

BEISIT

Nylon cable gland M16x1.5 5-10.0mm with lock nut and O ring

25 : $0.528
10 : $0.563
3 : $0.597
1 : $0.663

C146 10Z016 100 1

Amphenol Tuchel

Protective cover for panel enclosure for Heavy-Mate A series; size: A10; operating temperature: -40 deg.C to 100 deg.C; IP68

1 : $3.681

EX-M1610BR-LN

BEISIT

Cable gland M16; Nickel-plated brass; M16x1.5 5-10mm; Flat-O-ring; with lock nut; EX

20 : $5.028
10 : $5.606
5 : $5.924
1 : $6.442

C016 10H006 000 10

Amphenol Corporation

Circular Connectors; C016 10H006 000 10; AMPHENOL; Cable, Free Hanging

500 : $12.914
100 : $14.544
30 : $18.115
10 : $21.583
1 : $27.331

C01610D00600010

Amphenol Tuchel

Plug ECOMATE C016 series, 7 pins (6+PE), female, straight, 13A, 250V, cable: 0.14-1.5mm2( AWG26-16), contacts sold separately, crimp, colour: black-blue, IP67

50 : $4.888
20 : $5.611
5 : $6.931
1 : $7.733

Pasternack Enterprises US

PE3C6216-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Female Bulkhead to SMA Male Right Angle Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-NF-BH-LP N type bulkhead cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-NF-BH-LP type N to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable is a female to male coax assembly, PE3C6216-100CM, can also be known as a low PIM TC-SPP250-NF-BH-LP N type jack to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-NF-BH-LP type N jack to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6216-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-NF-BH-LP N cable assembly is manufactured with TC-SPP250-NF-BH-LP N type to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6216-100CM can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-NF-BH-LP type N female bulkhead cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-NF-BH-LP type N jack bulkhead to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-NF-BH-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE7316-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 7/16 DIN Female To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7316-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7316-10 10 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7316-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $635.0
10 : $609.6
25 : $584.2

PE1610

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.4mm, DC Port Connector Series: SMA, Minimum Frequency: 0.05 MHz, Maximum Frequency: 50 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 150 mA. 50 kHz to 50 GHz 2.4mm Bias Tee Rated to 150 mA and 25 Volts DC. PE1610 bias tee (also called bias T) has an 2.4mm connector RF port that is female gender. This Pasternack female 2.4mm bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 50 GHz. Our RF coaxial bias tee has a sma DC port connector with a female gender. This 2.4mm bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 150 mA. The PE1610 bias T with 2.4mm connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.4mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,640.0
5 : $2,534.4
10 : $2,428.8

PE3W16102/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using RG223 Coax with HeatShrink. PE3W16102/HS is a SMA male to TNC female bulkhead cable using RG223 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16102/HS SMA male to TNC female bulkhead cable assembly is constructed with RG223 coax.

PE3C1610/BK

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Plug to SMB Plug Cable Using LMR-195 Coax, LF Solder., Pasternack’s PE3C1610/BK SMB plug to SMB plug RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a SMB cable connection on the other. Our SMB to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1610/BK can also be known as a SMB male to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1610/BK RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMB plug to SMB plug cable has a maximum VSWR of 1.4:1. This PE3C1610/BK SMB male to SMB male cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMB male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMB RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W16103/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to TNC Male Cable Using LMR-200 Coax with HeatShrink. PE3W16103/HS is a reverse polarity TNC male to TNC male cable using LMR-200 coax. This Pasternack reverse polarity TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16103/HS TNC reverse polarity male to TNC male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16106

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to SMA Male Cable Using RG141 Coax. PE3W16106 is a reverse polarity TNC female to SMA male cable using RG141 coax. This Pasternack reverse polarity TNC female to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16106 TNC reverse polarity female to SMA male cable assembly is constructed with RG141 coax.

PE3W16108/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Snap-On QN Male to Snap-On QN Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W16108/HS is a QN male to QN male cable using LMR-240-UF coax. This Pasternack QN male to QN male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm QN for connector 2. Our male QN to male QN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16108/HS QN male to QN male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16105/HS

Pasternack Enterprises

PE3W16109

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 2.2-5 Male to N Male Cable Using PE-SR402FLJ Coax. PE3W16109 is a 2.2-5 male to N male cable using PE-SR402FLJ coax. This Pasternack 2.2-5 male to N male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm N for connector 2. Our male 2.2-5 to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W16109 2.2-5 male to N male cable assembly is constructed with PE-SR402FLJ coax.

PE3W21610

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using LMR-600-DB Coax. PE3W21610 is a 7/16 DIN male to 7/16 DIN male cable using LMR-600-DB coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21610 7/16 DIN male to 7/16 DIN male cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16108LF

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Snap-On QN Male to Snap-On QN Male Cable Using LMR-240-UF Coax, LF Solder. PE3W16108LF is a QN male to QN male cable using LMR-240-UF coax. This Pasternack QN male to QN male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm QN for connector 2. Our male QN to male QN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16108LF QN male to QN male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1610LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Plug to SMB Plug Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C1610LF/HS is a SMB plug to SMB plug cable using LMR-195 coax. This Pasternack SMB plug to SMB plug cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our plug SMB to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1610LF/HS SMB plug to SMB plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3FCA716-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: MPO (w/o pins), Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. MPO/UPC Female (w/o pins) to MPO/UPC Female (w/o pins), 8 Fiber, Type B, Single Mode OS2, OFNP Jacket-10M. Pasternack’s PE3FCA716-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with MPO (w/o pins)/UPC key up to MPO (w/o pins)/UPC key up connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions.This cable comes with 8-fiber MPO connectivity, which is optimized for compact parallel optics applications and supports BiDi, 40G, and 100G optical network architectures. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as 40G/100G BiDi and parallel optics network connections in data centers, high-density switch uplink and aggregation cabling applications, MPO-to-LC breakout connectivity for duplex transceiver deployments, compact backbones for enterprise and telecom, spine-to-leaf architecture links supporting scalable network growth, structured fiber cabling for server rooms and equipment racks and migration-ready single mode infrastructure for next-generation optical networks. With the flexibility of custom lengths, the PE3FCA716-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA716-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to MPO (w/o pins)/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $113.45
5 : $111.18
10 : $108.91
25 : $106.64

PE3W16108

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Snap-On QN Male to Snap-On QN Male Cable Using LMR-240-UF Coax. PE3W16108 is a QN male to QN male cable using LMR-240-UF coax. This Pasternack QN male to QN male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm QN for connector 2. Our male QN to male QN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16108 QN male to QN male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.