 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1785G-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | 9-5178524-8 | TE Connectivity | Connector: wire-wire; Automotive |
| 720 | |
| 217851-1126 | Molex | Connector: wire-wire; data; Inom: 20A; 600V; PIN: 1; Imax: 20A; tinned |
| 580 | ||
| 217851-1134 | Molex | 600V; PIN: 1; tinned; 16AWG; blue; crimped |
| 575 | ||
| 217-8516-002 | ITT Interconnect Solutions | 217-8516-002 |
| 500 | ||
| 217851-1124 | Molex | 600V; PIN: 1; tinned; 16AWG; red; crimped |
| 250 | ||
| 1785968 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON M RoHS : Compliant |
| 29 | ||
| 217853-1000 | Molex | Antenna: communication; GPS,GSM,LTE,WiFi; 5.7dBi; linear; 50Ω |
| 3 | ||
| 09178550 | GSR | Tap: metric; M12; fine thread,right hand thread; 1; L: 100mm; 7mm |
| 0 | ||
| 10178591 | Essentra Components | Washer; round; h=0.5mm; D=7mm; polyamide; natural |
| 0 | ||
| 1201785 | Phoenix Contact | Fixing element; L: 4.95mm; W: 9.9mm; H: 27.7mm; Body: silver RoHS : Compliant |
| 0 | ||
| 3517853 | Gedore Torque Ltd | Tools set: screwdriver bits; L: 90mm; HEX 6mm; 2pcs. |
| 0 | ||
| 1785971 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON M RoHS : Compliant |
| 0 | ||
| 817857-SF | TE Connectivity | Connector: AC supply; socket; male; power supply; Inom: 10A; 250VAC |
| 0 | ||
| 11785 | HELUKABEL | Wire; JZ; JZ-500 HMH-C; 7G6mm2; shielded,tinned copper braid RoHS : Compliant |
| 0 | ||
| 178-55-2 | IRIMO | Socket: 6-angles; socket spanner,impact; HEX 55mm; 1"; phosphated |
| 0 | ||
 Avnet Americas | 801-011-07NF17-85PC | Glenair Inc | - Bulk (Alt: 801-011-07NF17-85PC) RoHS : Not Compliant |
| 78 | |
| MKJ1A26F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A26F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A2F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A2F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A7F17-85SA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A7F17-85SA) RoHS : Not Compliant |
| 8 | ||
| MKJ1C7F17-85DA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1C7F17-85DA) RoHS : Not Compliant |
| 7 | ||
| 217851-1114 | Molex | Cable, UL 1015, Perma-Seal to Free End, 16 AWG, 300mm L, Tin, Black, Perma-Seal 217851 Series - Bulk (Alt: 51AJ9330) RoHS : Compliant |
| 0 | ||
| 217-8591-100 | ITT Interconnect Solutions | - Bulk (Alt: 217-8591-100) RoHS : Not Compliant |
| 0 | ||
| 2178586100 | ITT Interconnect Solutions | - Bulk (Alt: 2178586100) RoHS : Not Compliant |
| 0 | ||
| 637E17853I2T | CTS Corporation | - Tape and Reel (Alt: 637E17853I2T) RoHS : Compliant |
| 0 | ||
| 653E17853I2T | CTS Corporation | - Tape and Reel (Alt: 653E17853I2T) RoHS : Compliant |
| 0 | ||
| 637P17856C2T | CTS Corporation | - Tape and Reel (Alt: 637P17856C2T) RoHS : Compliant |
| 0 | ||
| 653P17856C2T | CTS Corporation | - Tape and Reel (Alt: 653P17856C2T) RoHS : Compliant |
| 0 | ||
| 653V17855C3T | CTS Corporation | - Tape and Reel (Alt: 653V17855C3T) RoHS : Compliant |
| 0 | ||
| MKJ1A1Z17-85PC | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A1Z17-85PC) RoHS : Not Compliant |
| 0 | ||
| MKJ1A26T17-85SC | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A26T17-85SC) RoHS : Not Compliant |
| 0 | ||
 Newark | 1971785-2 | TE Connectivity | Contact, Socket, 22-20Awg, Crimp; |Te Connectivity 1971785-2 RoHS : Compliant |
| 12,388 | |
| 10178591-00011LF | Amphenol Communications Solutions | Usb Conn, Type C2.0Rcpt, 6P, Smt, Th; |Amphenol Communications Solutions 10178591-00011LF RoHS : Compliant |
| 9,960 | ||
| MP001785 | SPC Multicomp | Wtb Housing, Rcpt, 6Pos, 1Row, 2Mm; |Multicomp Pro MP001785 RoHS : Compliant |
| 5,356 | ||
| GW-151785 | SPC Multicomp | Pwr Cord, R/A Cee 7/7 Plug-Iec C13, 2M; |Multicomp Pro GW-151785 RoHS : Compliant |
| 227 | ||
| 217851-1114 | Molex | Cable Assy, Ring Tongue-Free End, 300Mm; Connector To Connector:Perma-Seal Ring Tongue Terminal To Free End; Cable Length - Imperial:11.8"; Cable Length - Metric:300Mm; Product Range:Perma-Seal Ots 217851 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 200 | ||
| 217851-1114 | Molex | Cable Assy, Ring Tongue-Free End, 300Mm; |Molex 217851-1114 RoHS : Compliant |
| 165 | ||
| 178588 | Brady Worldwide Inc | Poe Fixed Scanner, Industrial; |Brady 178588 RoHS : Compliant |
| 55 | ||
| 2317857-2 | TE Connectivity | Dust & Emi Cover, Osfp I/O Connector; |Te Connectivity 2317857-2 RoHS : Compliant |
| 23 | ||
| FMCN1785 | Fairview Microwave Inc | Rf/Coaxial Connector, 2.4Mm Coaxial; |Fairview Microwave FMCN1785 RoHS : Not Compliant |
| 10 | ||
| 79178500 | Lapp Group | Heavy Duty Hood, 2 Lever, Sz 24B; Heavy Duty Connector Type:Hood, Top Entry; Connector Body Material:Aluminum Alloy Body; Locking Type:2 Lever; Rectangular Shell Size:24B; Product Range:Epic Hb Series Rohs Compliant: Yes |Lapp 79178500 RoHS : Compliant |
| 5 | ||
| EURO-MXPD-112-1521-120-1178-50 | Variohm EuroSensor | Sensor, Hall Effect/Rotary, Cw/Ccw, 120D; |Variohm Group EURO-MXPD-112-1521-120-1178-50 RoHS : Compliant |
| 5 | ||
| KS-1785-MG | BUD Industries Inc | Rack Shelf, 2.0, 483Mm, 521Mm; |Bud Industries KS-1785-MG RoHS : Compliant |
| 4 | ||
| THTEP-178-593-.5BK | Brady Worldwide Inc | Label, Raised Panel, Identification; |Brady THTEP-178-593-.5BK RoHS : Compliant |
| 4 | ||
| 1785 | Adafruit Industries | Medium Surface Transducer With Wires - 4 Ohm 3 Watt |Adafruit 1785 RoHS : Not Compliant |
| 0 | ||
| 1785 | Ultimaker BV | 3D Printer Filament, Pp, 2.85Mm, Natural; |Ultimaker 1785 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | MAX17851AUP/V+ | Analog Devices Inc | Automotive SPI to UART Bridge RoHS : Compliant |
| 11,199 | |
| MAX17852ACB/V+ | Analog Devices Inc | 14 Channel High-Voltage Data-A RoHS : Compliant |
| 6,861 | ||
| MAX17854ACB/V+ | Analog Devices Inc | Automotive 14-Channel High-Vol RoHS : Compliant |
| 1,351 | ||
| MAX31785AETL+T | Analog Devices Inc | 6 CHANNEL INTELLIGENT FAN CONT RoHS : Compliant |
| 525 | ||
| LT1785ACN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 317 | ||
| LT1785AIN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 84 | ||
| DC1785B | Analog Devices Inc | LTC2991 Demo board - I2C Tempe |
| 24 | ||
| LT1785AHS8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 22 | ||
| MAX31785AETL+ | Analog Devices Inc | 6 CHANNEL INTELLIGENT FAN CONT RoHS : Compliant |
| 22 | ||
| MAX31785K# | Analog Devices Inc | Eval Kit MAX31785 (6 Channel I |
| 18 | ||
| MAX17851EVKIT# | Analog Devices Inc | EVKIT for SPI to UART Command |
| 10 | ||
| MAX17853EVKIT# | Analog Devices Inc | EVKIT for 14 Channel High-Volt RoHS : Compliant | 6 | |||
| MAX17853ACB/V+T | Analog Devices Inc | 14 Channel High-Voltage Data-A RoHS : Compliant | 0 | |||
| LT1785AHS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 0 | ||
| LT1785HN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 0 | ||
 RS | 217-8516-001 | ITT Interconnect Solutions | CONN CIRC RECEPTACLE JAM NUT FOR SPECIAL WALL THICKNESS 2.0-5.0MM APD SER CIRC |
| 478 | |
| 1201785 | Phoenix Contact | NUT RoHS : Compliant |
| 44 | ||
| FN2640-20-08-C11 (821785) | TE Connectivity | EMC/EMI FILTER, IEC INLET, 250 VAC, M4 SCREW, 20A, FN2640 SERIES |
| 20 | ||
| RT-100 (301785-000-HT) | Smiths Interconnect | INERTION TOOL FLUSH FOR R-100 SERIES |
| 15 | ||
| 6117851 | RS Pro | PLATINUM RTD PT100 SOLDER TERMINATION 0.3IN PLATINUM PROBE -200 TO +650C |
| 5 | ||
| 2451785 (25531492) (MPOI02501500-100RS) | RS Pro | SCREW, 1/4-20 X 1 1/2 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 5 | ||
| 2691785 | RS Pro | CABLE TIE 203X4.8 BLACK FLAME RETARDANT |
| 4 | ||
| 82_MMBX-S50-0-1/111_NE (23001785) | HUBER+SUHNER | RF CONNECTOR, MMBX STRAIGHT PCB JACK(F) |
| 4 | ||
| PIF46UHF (51785) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, OPPOSED, LENGTH 18M |
| 3 | ||
| 8111785 | RS Pro | CABLE TIE NATURAL NYLON66 NON-RELEASABLE 4.4 X 0.1 IN (111 X 2.6MM) |
| 2 | ||
| 5178524 | RS Pro | 300 MM WATER PUMP PLIERS BOX JOINT WITH 6 - 48MM JAW CAPACITY |
| 1 | ||
| 1785731 | RS Pro | PANEL PRINTER. THERMAL LINE. HIGH SPEED |
| 1 | ||
| V31-GM-BK10M-PUR-U (217852) | PEPPERL+FUCHS GmbH | CORDSET, CABLES/CONNECTORS, 217852 |
| 1 | ||
| 1785 | Edwards Signaling | SWITCH, PUSHBTN;WEATHERPROOF;EQUIPMENT SURFACE MOUNT;NO;GRAY |
| 0 | ||
| 1785 | Adafruit Industries | MEDIUM SURFACE TRANSDUCER WITH WIRES - 4 OHM 3 WATT |
| 0 | ||
 Microchip Technology Inc | TFS1785 | Microchip Technology Inc | TFS1785, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | ||
| MIC2178-5.0YWM | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2178-5.0YWM-TR | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | 140-1785-02-01-00 | Cambion Electronics Ltd | RoHS : Compliant | 27,564 | ||
| 104178-5 | TE Connectivity | RoHS : Not Compliant | 1,069 | |||
| NAS1785-4H25 | NAS Bolts | 507 | ||||
| 5178537-4 | Misc. Rods and Studs | 94 | ||||
| 5178537-2 | Misc. Rods and Studs | 90 | ||||
| S235A178-5 | MISCELLANEOUS | 35 | ||||
| D791785 | Howmet Aerospace | 26 | ||||
| NAS1785-14-38 | NAS Bolts | 25 | ||||
| NAS1785-14-42 | NAS Bolts | 8 | ||||
| 140-1785-01-01-00 | Cambion Electronics Ltd | RoHS : Compliant | 7 | |||
| 71785 | Century Spring Corp | 5 | ||||
| 217-859108 | Acme Industrial Company | 3 | ||||
| 02-1785-000 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
| 02-1785-000 | MISCELLANEOUS | 1 | ||||
| NAS1785-5-12 | ESNA | 1 | ||||
 Rochester Electronics | LPC1785FBD208K | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 20,340 | |
| LPC1785FBD208,551 | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 6,740 | ||
| 2SA1785E-AN | onsemi | Trans BJTs Single 400V 1A SC-71 RoHS : Compliant |
| 7,500 | ||
| LT1785AIN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 35 | ||
| LT1785ACS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 34 | ||
| LT1785ACN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 500 | ||
| MAX17859ACB/V+CQP | Analog Devices Inc | 14 Channel High-Voltage Data-Acquisition | 130 | |||
| LT1785AIS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 2 | ||
SN65HVD1785D | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 115kbps 4.5V - 5.5V 8-SOIC Tube RoHS : Compliant |
| 16 | ||
| MIC2178-5.0BWM | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 5V 2.5A 20-SOIC Tube RoHS : Not Compliant |
| 13,219 | ||
| MIC2178-5.0YWM | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 5V 2.5A 20-SOIC Tube RoHS : Compliant |
| 5,798 | ||
 Sager | 201785-4 | TE Connectivity | Rack & Panel Connectors PIN HOOD RoHS : Compliant | 0 | ||
| 1731785 | Phoenix Contact | Pluggable Terminal Blocks 13 Pos 3.5mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| 817854-9 | TE Connectivity | Crimpers / Crimping Tools CRIMPER, WIRE RoHS : Compliant |
| 0 | ||
| 9-1372178-5 | TE Connectivity | TE Connectivity CUTTING PLATE | 0 | |||
| 7-2151785-2 | TE Connectivity | TE Connectivity OCEAN-2.0-APPLICATOR-S-078F102FA | 0 | |||
| 0431785002 | Molex | Headers & Wire Housings Sabre Term WtW M Tin 14-18 RoHS : Compliant |
| 0 | ||
| 0395178519 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 19CK | 0 | |||
| 0395178516 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 16CK | 0 | |||
| 817854-7 | TE Connectivity | Crimpers / Crimping Tools CRIMPER WIRE |
| 0 | ||
| 70166-1785 | OMRON Electronic Components | Mounting Hardware MS46SR-20-955-Q1-R-NO-FP | 0 | |||
| 0395178510 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 10CK | 0 | |||
| CM1-X0-17-858-301-I | Carling Technologies | Circuit Breakers | 0 | |||
| 8-2151785-4 | TE Connectivity | Bench Top Tools OC-PMC-AT-PA-S-F-MA | 0 | |||
| F3SG-4RA1785-25-01TS | OMRON Electronic Components | Safety Light Curtains F3SG-4RA1785-25-01TS | 0 | |||
| BA2-X0-17-856-C21-D | Carling Technologies | Circuit Breakers | 0 | |||
 Ameya Holding Limited | SN65HVD1785DR | Texas Instruments | SN65HVD Series 3.3 to 5 V 0.115 Mb/s 6 mA Fault-Protected RS-485 Transceiver - SOIC-8 RoHS : Compliant | 5,000 | ||
 ComSIT USA | LT1785CS8TRPBF | Linear Technology | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC T/R RoHS : Compliant | 1,485 | ||
| LFSPXO017856BULK | IQD Frequency Products | CRYSTAL OSC XO (Standard) HCMOS 33MHz 2.97V ~ 3.63V �100ppm 4-SMD RoHS : Compliant | 400 | |||
LT1785IS8 | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 350 | |||
| MAX17859ACBV+TCQP | Maxim Integrated Products | Multi-Cell Li-Ion Battery Pack Monitor, I�C interface, QFN-32, for battery management and protection applications RoHS : Compliant | 205 | |||
| 1785968V0 | Phoenix Contact | HEADER Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 150 | |||
| LT1785AIS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 103 | |||
| LT1785CS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 87 | |||
| LT1785ACS8 | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 33 | |||
 Interstate Connecting Components | 801-001-16Z117-85SB | Glenair Inc | MM RECP 85#23 SKT SS |
| 27 | |
| 801-008-16M17-85PB | Glenair Inc | PLG ACC THRD 85#23 PIN Al RoHS : Compliant |
| 1 | ||
| 217-8591-100 | ITT Interconnect Solutions | 2178591100 | 0 | |||
| 8-178563-3 | TE Connectivity | DYNAMIC 12P W/WRAPPING POST XX RoHS : Compliant | 0 | |||
| 801-002-16NF17-85SN | Glenair Inc | 0 | ||||
| 801-003-07M17-85SN | Glenair Inc | 0 | ||||
| 801-007-16C17-85AB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-007-16NF17-85SA | Glenair Inc | PLG BND PLTFRM 85#23 SKT Al/Cad RoHS : Not Compliant |
| 0 | ||
| 801-007-16ZNU17-85PA | Glenair Inc | PLG BND PLTFRM 85#23 PIN AL/BlkZiNi RoHS : Not Compliant |
| 0 | ||
| 801-007-26NF17-85PE | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-008-16C17-85BB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-008-16NF17-85PA | Glenair Inc | PLG ACC THRD 85#23 PIN Al/Cad RoHS : Not Compliant |
| 0 | ||
| 801-009-01ZNU17-85BC | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-02C17-85AA | Glenair Inc | 0 | ||||
| 801-009-02M17-85BD | Glenair Inc | RoHS : Compliant | 0 | |||
 NexGen Digital | LT1785AIN8#PBF | Analog Devices Inc | RoHS : Compliant | 200 | ||
 PEI Genesis | 217-8516-001 | ITT Interconnect Solutions |
| 833 | ||
| S1785-4950-4 | SOURIAU-SUNBANK |
| 0 | |||
| S1785-1875-4 | SOURIAU-SUNBANK |
| 0 | |||
| 1785-6001 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| DRK178-5 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 317-8531-001 | ITT Interconnect Solutions |
| 0 | |||
| 317-8578-000 | ITT Interconnect Solutions |
| 0 | |||
| 217-8536-120 | ITT Interconnect Solutions |
| 0 | |||
| 217-8547-100 | ITT Interconnect Solutions |
| 0 | |||
| 217-8528-120 | ITT Interconnect Solutions |
| 0 | |||
| 317-8531-000 | ITT Interconnect Solutions |
| 0 | |||
| Y1785 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 217-8542-100 | ITT Interconnect Solutions |
| 0 | |||
| 91-785353-35P2 | Amphenol Corporation |
| 0 | |||
| S1785-1550-2 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 1217853-1 | TE Connectivity | Terminals RoHS : Compliant |
| 549,120 | |
| 2178506-3 | TE Connectivity | Terminals RoHS : Compliant |
| 10,560 | ||
| 5-104178-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,479 | ||
| 2317857-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 2,242 | ||
| 9-5178524-8 | TE Connectivity | Connectors |
| 475 | ||
| 2178531-1 | TE Connectivity | TE COMPONENT (REF 2178531-1) RoHS : Compliant |
| 190 | ||
| 201785-4 | TE Connectivity | Backplane Connectors RoHS : Compliant |
| 90 | ||
| 801-007-16ZNU17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Not Compliant |
| 11 | ||
| 8-178563-4 | TE Connectivity | Connectors RoHS : Compliant |
| 7 | ||
| 801-009-07MT17-85SA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 5 | ||
| 801-008-16NF17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Not Compliant |
| 4 | ||
| 2M801-008-16NF17-85SD | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 3 | ||
| 817854-9 | TE Connectivity | CRIMPER, WIRE RoHS : Compliant |
| 1 | ||
| 20017850-00 | TE Connectivity | SENSOR (TE REF 20017850-00) |
| 1 | ||
| 2217859-1 | TE Connectivity | Tools |
| 1 | ||
 Richardson RFPD | 935325178574 | NXP Semiconductors | MCU 8-bit S08 CISC 2KB Flash 3.3V/5V 8-Pin SOIC N RoHS : Compliant |
| 0 | |
| LT1785AIN8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin PD RoHS : Compliant |
| 0 | ||
| LT1785AHS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| 570AAA001785DG | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±61.5ppm LVPECL 55% 3.3V 8 RoHS : Compliant |
| 0 | ||
| 570AAA001785DGR | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±61.5ppm LVPECL 55% 3.3V 8 RoHS : Compliant |
| 0 | ||
| 570ACA001785DGR | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±20ppm LVPECL 55% 3.3V 8-P RoHS : Compliant |
| 0 | ||
| LFXTAL071785CUTT | IQD Frequency Products | Crystal 25MHz ±50ppm (Tol) ±100ppm (Stability) 8pF RoHS : Compliant |
| 0 | ||
| R163178501 | Radiall | N-18 M R/A CR HABIA500 |
| 0 | ||
| 101785-HMC207AS8 | Analog Devices Inc | HMC207AS8/HMC207AS8E Up-Down Converter and Mixer E RoHS : Compliant | 0 | |||
| DC1785B | Analog Devices Inc | LTC2991 Power Supply Controller and Monitor Demons RoHS : Compliant |
| 0 | ||
| LT1785CS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785CS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785AIS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785ACS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785ACS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
 Rutronik | 17.17851.21 | 17 17851 21 DJET D6,35 MA-M AU RoHS : Compliant |
| 50 | ||
 Chip 1 Exchange | 1971785-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,453,080 | ||
| 1217853-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,081,600 | |||
| 2178531-1 | TE Connectivity | INSTOCK RoHS : Compliant | 30,351 | |||
| CXA1785ART4 | INSTOCK | 9,200 | ||||
| 5-104178-5 | TE Connectivity | INSTOCK RoHS : Compliant | 5,840 | |||
| 2317857-2 | TE Connectivity | INSTOCK RoHS : Compliant | 3,900 | |||
| OPB11785 | INSTOCK | 2,405 | ||||
| LT1785AIS8#PBF | INSTOCK | 514 | ||||
| ROS17851+ | INSTOCK | 500 | ||||
| CVCO55BE-1785-1900 | Cirrus Logic | INSTOCK | 286 | |||
| CVCO55BE-1785-1900 | INSTOCK | 286 | ||||
| LT1785ACS8#PBF | INSTOCK | 111 | ||||
| 60178-511 00/QUANTE-SID-P | 3M | INSTOCK | 59 | |||
| LT1785AIS8-PBF | LTECH | INSTOCK | 46 | |||
 Avnet Abacus | 1785942 | Phoenix Contact | Terminal Block Socket 508 mm 2 Ways 12 A 320 V Through Hole Vertical (Alt: 1785942) RoHS : Compliant | 150 | ||
| 1785955 | Phoenix Contact | Terminal Block Socket 508 mm 3 Ways 12 A 320 V Through Hole Vertical (Alt: 1785955) RoHS : Compliant | 100 | |||
| 1785968 | Phoenix Contact | Terminal Block Socket 508 mm 4 Ways 12 A 320 V Through Hole Vertical (Alt: 1785968) RoHS : Compliant | 50 | |||
| 1785984 | Phoenix Contact | Terminal Block Socket 508 mm 6 Ways 12 A 320 V Through Hole Vertical (Alt: 1785984) RoHS : Compliant | 50 | |||
| 20817858 | nVent Schroff | Trapezoid Form Extractor Handle Polyphenylene Ether (Alt: 20817858) RoHS : Compliant | 2 | |||
| 1731785 | Phoenix Contact | MC 1513G35RN MC1513G35RN (Alt: 1731785) RoHS : Compliant | 0 | |||
| 201785-4 | TE Connectivity | Connector Accessories 26 POS Pin Hood Loose Piece Carbon Steel Nickel Finish (Alt: 201785-4) RoHS : Compliant | 0 | |||
| 817854-9 | TE Connectivity | CRIMPER WIRE (Alt: 817854-9) RoHS : Not Compliant | 0 | |||
| 817854-9 | TE Connectivity | CRIMPER WIRE (Alt: 817854-9) RoHS : Not Compliant | 0 | |||
| 637E17853I2T | CTS Corporation | - Tape and Reel (Alt: 637E17853I2T) RoHS : Compliant | 0 | |||
| 653E17853I2T | CTS Corporation | - Tape and Reel (Alt: 653E17853I2T) RoHS : Compliant | 0 | |||
| 637P17856C2T | CTS Corporation | - Tape and Reel (Alt: 637P17856C2T) RoHS : Compliant | 0 | |||
| 653P17856C2T | CTS Corporation | - Tape and Reel (Alt: 653P17856C2T) RoHS : Compliant | 0 | |||
| ZPF000000000017858 | TE Connectivity | (Alt: ZPF000000000017858) RoHS : Not Compliant | 0 | |||
| 801-008-16NF17-85PA | Glenair Inc | Conn Mighty Mouse PIN 85 POS Crimp ST Cable Mount 85 Terminal 1 Port (Alt: 801-008-16NF17-85PA) RoHS : Compliant | 0 | |||
Avnet Asia | 2-2071785-3 | TE Connectivity | ECK250BHDASA,05 (Alt: 2-2071785-3) RoHS : Compliant | 0 | ||
| 1971785-2 | TE Connectivity | (Alt: 1971785-2) RoHS : Compliant | 0 | |||
| 1971785-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount (Alt: 1971785-1) RoHS : Compliant |
| 0 | ||
| 1SNA178529R0400 | TE Connectivity | (Alt: 1SNA178529R0400) RoHS : Compliant | 0 | |||
 Avnet Silica | LPC1785FBD208K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | ||
 Component Electronics, Inc | 178-511 | Spaenaur | IN STOCK SHIP TODAY | 1,000 | ||
| LT1785CS8#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 443 | ||
| LT1785IS8#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 1785955 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| LT1785CS8 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
LT1785IN8 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| 10917856-1 | IN STOCK SHIP TODAY | 4 | ||||
| 150-1785-02 | Sun Microsystems Inc | IN STOCK SHIP TODAY | 1 | |||
| SN65HVD1785P | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | SPL17857LH | Spiralock | 7/8-14SPL LH 4StFl GP B NiT |
| 2 | |
| SPL17857A | Spiralock | 7/8-14 SPL 4RS MP B TiN |
| 2 | ||
| 31785 | Essentra Components | 0 | ||||
| 461785 | Essentra Components | 0 | ||||
| 551785 | Essentra Components | Rivet Based Spacer 22 mm Spacer Natural | 0 | |||
| SPL17855A | Spiralock | 7/8-14 SPL3SP MP P TiN Standard New Taps | 0 | |||
| AC-CAB1-7-1785-060 | Southco | 0 | ||||
| 02910-11785 | Avdel | AVSEALII PLG 15.5MM ALST | 0 | |||
| 1785-832-SS | RAF Electronic Hardware | 0 | ||||
| M1178-5008-A | RAF Electronic Hardware | 0 | ||||
| M6178-5008-A | RAF Electronic Hardware | 0 | ||||
| 17W01785B | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
| 17W01785 | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
 EBV Elektronik | MIC2178-5.0YWM | Microchip Technology Inc | 25A 200KHZ SYNCHRONOUS SWITCHER (Alt: MIC2178-5.0YWM) RoHS : Compliant | 0 | ||
| LPC1785FBD208K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | |||
 FDH Electronics | 801-007-16NF17-85SA | Glenair Inc | Connector RoHS : Not Compliant | 0 | ||
| 801-007-16ZNU17-85PA | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-008-16M17-85PB | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-008-16NF17-85PA | Glenair Inc | Circular Conn RoHS : Not Compliant | 0 | |||
| 801-011-02NF17-85SA | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-007-16ZNU17-85PB | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-008-16M17-85PC | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-008-16NF17-85PB | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-009-07M17-85SA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-010-07ZNU17-85SA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-010-02M17-85SC | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-010-07ZN17-85SA | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-009-07NF17-85SB | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-011-07M17-85SB | Glenair Inc | Connector Misc RoHS : Compliant | 0 | |||
| 801-008-16M17-85SA | Glenair Inc | Connector Acc RoHS : Compliant | 0 | |||
 Flip Electronics | LPC1785FBD208,551 | NXP Semiconductors | Stock RoHS : Compliant | 1,872 | ||
 Maritex | 1971785-1 | TE Connectivity | Rectangular Connector Contacts; 1971785-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 24 AWG RoHS : Compliant |
| 29,267 | |
 Master Electronics | 1731785 | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - number of positions: 13 - pitch: 3.5 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.4 mm RoHS : Compliant |
| 0 | |
| 817854-9 | TE Connectivity | CRIMPER WIRE RoHS : Not Compliant |
| 0 | ||
| 9-1372178-5 | TE Connectivity | CUTTING PLATE RoHS : Compliant |
| 0 | ||
| 8-178563-4 | TE Connectivity | DYNAMIC 12P W/WRAPPING POST YY RoHS : Compliant |
| 0 | ||
| ZPF000000000017858 | TE Connectivity | FAST-D 03 M-X-A 00 A MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| MKJ1A1Z17-85PC | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MKJ1A26T17-85SC | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1A7Z17-85FA | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Jam Nut 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1A7Z17-85PAF0 | ITT Interconnect Solutions | Connector Circular Housing PIN 85 Position 17 Shell Size Zinc Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1B1C17-85PA | ITT Interconnect Solutions | MKJ1B1C17-85PA RoHS : Compliant |
| 0 | ||
| MKJ1B26W17-85SC | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| MKJ1B2F17-85PE | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Crimp Straight Flange Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B6T17-85PA | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Crimp Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B7W17-85PE | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Crimp Straight Jam Nut 85 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| MKJ1B7Z17-85SC | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Jam Nut 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W17857 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 745 | ||
| PE3W17857-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857-50CM can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857-50CM can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17854-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Male Low PIM Cable 36 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 36 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 36 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-36 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-36 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17854-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-60 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17854-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-24 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17856-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Female Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856-12 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856-12 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | ||
| PE517852 | Pasternack Enterprises | Key Specifications. Polarity Standard Connector Series Mini SMP Connector Gender Male Impedance 50 Ohm Body Style Straight Attachment Method Solder Mount Method Surface Mount Minimum Frequency DC Maximum Frequency 67 GHz. Mini SMP Male Smooth Bore Connector Solder Attachment Surface Mount PCB, Up to 67.0 GHz. Pasternack's PE517852 Mini SMP Male Smooth Bore Connector Solder Attachment is part of our full line of RF components available for same-day shipping. Our Mini SMP male connector operates up to a maximum frequency of 67 GHz and offers good VSWR of 1.93:1. The Pasternack blind mate connector is ideal for applications where direct visual or tactile access to the connection point is not possible, for example, when two circuit boards need to be mated. Our Mini SMP male surface mount connector PE517852 datasheet specifications and drawing with dimensions are shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom cable assemblies for you and ship same-day. |
| 7 | ||
| PE3FCA178-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC APC to ST UPC, SM OS2, 2.0mm Riser, Yellow-5M. Pasternack’s PE3FCA178-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with duplex SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA178-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W17851-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851-12 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17851 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W17859 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male Right Angle to NEX10 Female Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17859 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17859 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17859 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17859 can also be used in the other direction and will be NEX10 female to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W17851-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 60 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851-60 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17858-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 36 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 36 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 36 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17858-36 can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17858-36 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17858-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17852-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 198.1 CM Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 198.1 cm length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male right angle low PIM cable 198.1 cm length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17852-200CM can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17852-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17852-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17852-200CM can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17852-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 24 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male right angle low PIM cable 24 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17852-24 can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17852-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17852-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17852-24 can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 1971785-2 | TE Connectivity | PTL RECEPTACLE CONTACT, 20 - 24 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 20 AWG Operating Voltage: 600 VAC Tin (Sn) Receptacle Pre-Tin 24 – 20 AWG | Receptacle Contact — Power Triple Lock | Part Number: 1971785-2 | Internal Number: 1971785-2 | TE Connectivity RoHS : Compliant |
| 36,629 | |
| 1971785-1 | TE Connectivity | PTL RECEPTACLE CONTACT, 20 - 24 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 20 AWG Operating Voltage: 600 VAC Tin (Sn) Receptacle Pre-Tin 24 – 20 AWG | Receptacle Contact — Power Triple Lock | Part Number: 1971785-1 | Internal Number: 1971785-1 | TE Connectivity RoHS : Compliant |
| 11,122 | ||
| 5-104178-5 | TE Connectivity | 08 SYS 50 HDR SRST UNSHRD SN Part Number: 5-104178-5 | Internal Number: 5-104178-5 | TE Connectivity RoHS : Compliant |
| 3,765 | ||
| 2178531-1 | TE Connectivity | CROWN CLIP JUNIOR CONNECTOR Connector System: Board-to-Bus Bar Number of Positions: 1 Connector & Contact Terminates To: Printed Circuit Board Mating Conductor Thickness: .118 in Mating Conductor Thickness: 3 mm Board-to-Bus Bar 1 Printed Circuit Board .118" | Busbar Connector | Part Number: 2178531-1 | Internal Number: 2178531-1 | TE Connectivity RoHS : Compliant |
| 16 | ||
| 1SNA178529R0400 | TE Connectivity | PR50 Mounting & Retention Accessory Type: Module Block/Mounting Rail Assembly Product Length: .59 in Product Length: 15 mm Operating Temperature Range: -67 – 221 °F Operating Temperature Range: -55 – 105 °C Module Block/Mounting Rail Assembly .59" | Terminal Block & Strip Mounting & Retention Accessories | Part Number: 1SNA178529R0400 | Internal Number: 1SNA178529R0400 | TE Connectivity RoHS : Compliant |
| 10 | ||
 Venkel Ltd. | PWCR2010-WK-1785DT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | ||
| CR1210-4W-1785FT | VENKEL LTD | Chip Resistor;1210;1/4W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1785FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0402-16W-1785FT | VENKEL LTD | Chip Resistor;0402;1/16W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1785FT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2010-WK-1785FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-1785FT | VENKEL LTD | Chip Resistor;0805;1/8W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR1206-8W-1785FT | VENKEL LTD | Chip Resistor;1206;1/8W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-1785FT | VENKEL LTD | Chip Resistor;0805;1/10W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1785FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1785DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR2010-2W-1785FT | VENKEL LTD | Chip Resistor;2010;1/2W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1785DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR0603-10W-1785FT | VENKEL LTD | Chip Resistor;0603;1/10W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR2512-1W-1785FT | VENKEL LTD | Chip Resistor;2512;1W;17.8M;�1% RoHS : Compliant | 0 | |||
 Vyrian | LT1785AHS8-TRPBF | Analog Devices Inc | 12,112 | |||
| MAX17854ACB-V-T | Analog Devices (Maxim Integrated) | 10,726 | ||||
| MAX17851AUP/V+ | Analog Devices Inc | Serial I/O Controller RoHS : Compliant | 10,598 | |||
| LT1785AIN8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Compliant | 10,229 | |||
| LT1785AIN8#TR | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Not Compliant | 9,984 | |||
| 1731785 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,387 | |||
| MAX31785AETL | Analog Devices (Maxim Integrated) | 9,124 | ||||
| SN65HVD1785DG4 | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8 RoHS : Compliant | 8,841 | |||
| MAX17854EVKIT | Analog Devices (Maxim Integrated) | 7,384 | ||||
| MAX17851AUP-V-T | Analog Devices (Maxim Integrated) | 7,277 | ||||
| MAX17854ACB-V | Analog Devices (Maxim Integrated) | 6,422 | ||||
| LT1785HN8#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Compliant | 6,264 | |||
| LT1785AHS8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 6,127 | |||
| LT1785IS8#TR | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 5,952 | |||
| MAX17859ACB-V-TCQP | Analog Devices (Maxim Integrated) | 5,802 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British