178L-CC2-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

220

PE517804

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SSMC, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG316-DS, Interface Type 2: RG188-DS. SSMC Plug Right Angle Connector Crimp/Solder Attachment for RG316-DS, RG188-DS. PE517804 SSMC plug right angle coaxial connector has an interface type of SSMC plug, which is compatible with RG316-DS and RG188-DS cables, and has an impedance of 50 Ohms. Pasternack’s SSMC plug connector uses crimp/solder as an attachment method. Our plug SSMC right angle coaxial connector provides a maximum frequency of 6 GHz. This SSMC plug RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack right angle SSMC plug coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SSMC coaxial connector has a brass body with gold over nickel over copper plating. Our PE517804 SSMC right angle connector uses a beryllium copper inner contact and a brass outer contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 5 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE517804 SSMC connector operates at a temperature range of -65 to 165 deg C. Our plug SSMC coaxial RF connector has a maximum insertion loss of 0.245 dB. This right angle connector has gold over nickel over copper inner and outer contact plating. The Pasternack SSMC plug connector has a maximum operating voltage of 175 Vrms and a dielectric withstanding voltage of 500 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 10,000 MOhms. Our right angle SSMC plug connector has a length of 0.406 inches, a width of 0.158 inches, and a weight of 0.5 lbs. This Pasternack right angle plug SSMC connector will ship the same business day as purchased. Our SSMC right angle plug coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $23.19
5 : $22.73
10 : $22.26
25 : $21.8

PE3C6178-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum Snap-On 4.3-10 Male to Snap-On 4.3-10 Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-4310MS-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable is a male to male coax assembly, PE3C6178-12, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly PE3C6178-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-4310MS-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3W17851-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. NEX10 Male to NEX10 Male Low PIM Cable 78 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 78 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 78 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851-200CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

PE34178

Pasternack Enterprises

PE34178-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to N Female Bulkhead Cable 18 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male to N female bulkhead cable 18 inch length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 18 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE34178-18, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34178-18 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this SMA male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34178-18 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 18 inch length using PE-P195 coax.

1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47

PE34178LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to N Female Bulkhead Cable 36 Inch Length Using PE-P195 Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead cable 36 inch length using PE-P195 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 36 inch length using PE-P195 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34178LF-36, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34178LF-36 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34178LF-36 can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 36 inch length using PE-P195 coax, RoHS.

1 : $89.99
25 : $85.49
50 : $80.99
100 : $77.39

PE3W01787LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG213 Coax, LF Solder. PE3W01787LF is a BNC male to BNC male cable using RG213 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01787LF BNC male to BNC male cable assembly is constructed with RG213 coax.

PE3W10178

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to C Male Cable Using LMR-195 Coax. PE3W10178 is a BNC male to C male cable using LMR-195 coax. This Pasternack BNC male to C male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm C for connector 2. Our male BNC to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10178 BNC male to C male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W17830-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to TNC Female Bulkhead Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3W17830-18 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17830-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 3.5mm plug to TNC jack cable assembly PE3W17830-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17830-18 can also be used in the other direction and will be TNC female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $275.99
25 : $262.19
50 : $248.39
100 : $237.35

PE3W17843LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using RG142 Coax, LF Solder. PE3W17843LF is a N male to SMA male cable using RG142 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17843LF N male to SMA male cable assembly is constructed with RG142 coax.

PE91788

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Radius Right Angle, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. TNC Male to Female Radius Right Angle Adapter, VSWR 1.2 Max. DC-18GHz. The TNC radius right angle adapter PE91788 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.2:1. This RF adapter has a plug to jack gender configuration, which provides easier connections in tighter spaces. Our TNC to TNC adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 18 GHz. This in-series RF adapter has a dielectric withstanding voltage of 1,000 Vrms. This TNC plug to TNC jack adapter is one of the many RF components that ship the same business day as they are ordered. The PE91788 plug TNC to jack TNC adapter has a radius right angle body. This Pasternack radius right angle TNC coax adapter is a 90 degree swept elbow adapter. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This RF adapter has a 1.35-inch length, 0.56-inch width, and 0.05 lbs weight. The PE91788 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our TNC plug to TNC jack radius right angle radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of radius right angle TNC to TNC radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz RF adapter that meets your requirements.

1 : $415.99
10 : $399.35
25 : $382.71
100 : $366.07

PE3W11178

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm.

PE3W17802

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using LMR-240-UF Coax. PE3W17802 is a 7/16 DIN male right angle to 7/16 DIN male right angle cable using LMR-240-UF coax. This Pasternack 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN right angle to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17802 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W17808LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. 2.92mm Female 4 Hole Flange to 1.85mm Male Cable Using PE-SR047AL Coax, LF Solder. PE3W17808LF is a 2.92mm female 4 hole flange to 1.85mm male cable using PE-SR047AL coax. This Pasternack 2.92mm female 4 hole flange to 1.85mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our female 2.92mm 4 hole flange to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17808LF 2.92mm female 4 hole flange to 1.85mm male cable assembly is constructed with PE-SR047AL coax.

Teledyne HiRel

5962-9217801M2A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUS
RoHS : Not Compliant

5962-9217801MRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUS
RoHS : Not Compliant

5962-9217801MSA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUS
RoHS : Not Compliant

Venkel Ltd.

CR0603-10W-1784DT

VENKEL LTD

Chip Resistor;0603;1/10W;1.78M;�0.5%
RoHS : Compliant

CR1210-4W-1784FT

VENKEL LTD

Chip Resistor;1210;1/4W;1.78M;�1%
RoHS : Compliant

CRG2010-V-1783FT

VENKEL LTD

RoHS 10/10 Green CR;2010;1/2W;178K;�1%
RoHS : Compliant

MELFC0102-UC-1781FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;1.78K;�1%
RoHS : Compliant

MELFC0102-UE-1781BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;1.78K;�0.1%
RoHS : Compliant

MELFC0102-UZ-1781CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;1.78K;�0.25%
RoHS : Compliant

MELFC0102-YZ-1780BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;178R;�0.1%
RoHS : Compliant

MELFC0204-TN-1782FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;17.8K;�1%
RoHS : Compliant

MELFC0204-TP-1782BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;17.8K;�0.1%
RoHS : Compliant

MELFC0204-ZN-1782DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;17.8K;�0.5%
RoHS : Compliant

MELFC0207-VP-1783BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�5PPM;178K;�0.1%
RoHS : Compliant

MELFC0207-XK-1782FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�100PPM;17.8K;�1%
RoHS : Compliant

MELFM0207-XE-1780DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�25PPM;178R;�0.5%
RoHS : Not Compliant

HVCR0805-8W-1784FT

VENKEL LTD

High Voltage CR;0805;1/8W;1.78M;�1%
RoHS : Compliant

HPTF0603-QN-1781BT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;1.78K;�0.1%
RoHS : Compliant

Waytek, Inc.

15317832

Aptiv PLC

CPA 16 - 8 Cavity GT 280 & 150 DELPHI 15317832

50 : $0.1777
200 : $0.1645
500 : $0.1498
1,000 : $0.1389
5,000 : $0.1323

12,339

91789

FTZ Industries

4/0 GA 1/2 Stud Tinned Copper Eyelet Heavy Duty Yellow Code ALT 36364

1 : $3.524
50 : $3.3324
100 : $3.2175
200 : $3.0835
500 : $2.9686
1,000 : $2.892

1,613

91787

FTZ Industries

4/0 GA 3/8 Stud Tinned Copper Eyelet Heavy Duty Yellow Code ALT 36363

1 : $3.524
50 : $3.3324
100 : $3.2175
200 : $3.0835
500 : $2.9686
1,000 : $2.892

410

2GK51-78

Carling Technologies

Carling Technologies 2GK51-78 sealed metal toggle switch is a DPST On-Off switch rated 15A for 12-24VDC use. It features sealed metal construction, 1/4" blade terminal style, and included face nut hardware for maintained panel switching.
RoHS : Compliant

1 : $14.71
10 : $13.09
50 : $12.03
100 : $11.66
200 : $11.28
500 : $10.97

330

2GM51-78

Carling Technologies

Carling Technologies 2GM51-78 sealed metal toggle switch is a DPDT On-Off-On switch rated 15A for 12-24VDC use. It features (6) 1/4" blade terminals, sealed metal construction, and included face nut hardware for panel mounting.
RoHS : Compliant

1 : $15.57
10 : $14.02
50 : $13.06
100 : $12.62
200 : $12.32
500 : $11.95

2GL51-78

Carling Technologies

Carling Technologies 2GL51-78 sealed metal toggle switch is a DPDT On-On switch rated 15A for 12-24VDC use. It features (6) 1/4" blade terminals, sealed metal construction, and included face nut hardware for maintained two-position control.
RoHS : Compliant

1 : $14.0
10 : $13.56
20 : $12.38
50 : $11.5
100 : $11.09
200 : $10.8

Win Source Electronics

MC33178DR2G

onsemi

IC OPAMP GP 5MHZ 8SOIC
RoHS : Compliant

4,300 : $0.0698
3,210 : $0.0779
2,485 : $0.0805
1,805 : $0.0832
1,165 : $0.0859
480 : $0.1047

68,890

SN65HVD1780D

Texas Instruments

IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC
RoHS : Compliant

285 : $1.0623
230 : $1.1055
175 : $1.1487
125 : $1.235
80 : $1.2782
40 : $1.3646

40,000

2SD1782K T146Q/R

ROHM Semiconductor

2,895 : $0.1161
2,165 : $0.1296
1,675 : $0.1341
1,215 : $0.1385
785 : $0.1429
325 : $0.1743

31,650

SN65HVD1780DR

Texas Instruments

IC TXRX RS485 FAULT-PROT 8-SOIC
RoHS : Compliant

285 : $1.0623
230 : $1.1055
175 : $1.1487
125 : $1.235
80 : $1.2782
40 : $1.3646

27,870

BA178M05FP-E2

ROHM Semiconductor

IC REG LDO 5V 0.5A TO252-3
RoHS : Compliant

265 : $1.1519
195 : $1.2848
155 : $1.3291
110 : $1.3734
75 : $1.4177
30 : $1.7279

20,000

SN65HVD1785DR

Texas Instruments

IC FAULT-PROT RS485 TXRX 8-SOIC
RoHS : Compliant

124 : $2.4228
100 : $2.5213
77 : $2.6197
54 : $2.8167
35 : $2.9152
17 : $3.1122

13,690

ADAU1787BCBZRL

Analog Devices Inc

4 ADC, 2 DAC LOW POWER CODEC, AU / General Purpose Interface 24 b I2C, SPI 42-WLCSP (2.7x2.32)
RoHS : Compliant

48 : $6.3114
36 : $7.0397
28 : $7.2824
20 : $7.5251
13 : $7.7679
6 : $9.4671

10,000

PCM1781DBQR

Texas Instruments

IC DAC 24BIT MONO 192KHZ 16SSOP
RoHS : Compliant

191 : $1.5789
142 : $1.7611
110 : $1.8218
80 : $1.8825
52 : $1.9432
22 : $2.3683

8,000

SN65HVD1785D

Texas Instruments

IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC
RoHS : Compliant

124 : $2.4228
100 : $2.5213
77 : $2.6197
54 : $2.8167
35 : $2.9152
17 : $3.1122

7,500

PIC16F1783-I/SS

Microchip Technology Inc

IC MCU 8BIT 7KB FLASH 28SSOP
RoHS : Compliant

150 : $2.0051
112 : $2.2365
87 : $2.3136
63 : $2.3907
41 : $2.4678
17 : $3.0077

6,000

LT1782IS6#TR

Analog Devices Inc

IC OPAMP GP 1 CIRCUIT TSOT23-6 / General Purpose Amplifier 1 Circuit Rail-to-Rail TSOT-23-6
RoHS : Not Compliant

71 : $4.2382
53 : $4.7273
41 : $4.8903
30 : $5.0533
20 : $5.2163
8 : $6.3573

4,900

LT1785CS8#PBF

Linear Technology

IC TXRX RS485/RS422 60V 8-SOIC
RoHS : Compliant

67 : $4.4944
50 : $5.0129
39 : $5.1858
28 : $5.3587
19 : $5.5315
8 : $6.7415

4,740

TNY178PN

Power Integrations

IC OFFLINE SWITCH PMIC 8DIP

405 : $0.8319
305 : $0.928
235 : $0.96
170 : $0.992
110 : $1.024
45 : $1.2479

3,895

LPC1788FBD144

Nexperia

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG

30 : $11.44
22 : $12.76
17 : $13.2
13 : $13.64
8 : $14.0801
4 : $17.16

3,050

SN751178NSRG4

Texas Instruments

DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
RoHS : Compliant

44 : $6.894
33 : $7.6894
26 : $7.9546
19 : $8.2197
12 : $8.4849
5 : $10.341

1,100

178L-CC2-R Distributor

Link URL