183AL-33-AF5-R Price, Distributor, Stock

183AL-33-AF5-R Distributor

Distributor

Part #

Manufacturer

Description

Price

Qty.
BuyNow

Chip 1 Exchange

RC2012F183CS

INSTOCK

115,000

ACD-183244-01

Samtec Inc

INSTOCK

13,325

FTR1206183JR

Hosonic Electronic Co Ltd

INSTOCK

10,000

RMC1/8-39.2K52-5SP

SEI Stackpole Electronics Inc

INSTOCK

5,000

Q-20.0-JXS75-18-30/30-FU-LF

INSTOCK

2,500

CP06/FCR03JT-183

Prosperity Dielectrics Co Ltd

INSTOCK

2,000

RMC 1/8 301 1% R

INSTOCK

1,911

MKT1818 368/014

INSTOCK

1,280

RCR07G183JS

INSTOCK

1,033

MKP1837-347-011

INSTOCK

892

801-83-012-10-012101

INSTOCK

555

70091837

Yazaki Corp

INSTOCK

500

691418320002-

Wurth Elektronik

INSTOCK

178

CY7C371-83JC

INSTOCK

M83723/72W1831N

INSTOCK

Avnet Asia

HVC5221D-GE-B3-FFFFT----183

TDK Corporation

Power Film Capacitor, 0.018 uF, 600 V, 1 kV, ? 5%, Double Metallized PP, Radial Box - 2 Pin, Through Hole (Alt: HVC5221D-GE-B3-FFFFT----183)
RoHS : Compliant

245,000 : $1.9425
122,500 : $1.99231
49,000 : $2.04474
24,500 : $2.1
14,700 : $2.12877
9,800 : $2.15833
4,900 : $2.18873

24,500

BD18336NUF-ME2

ROHM Semiconductor

LED Driver 1-CH 3 LEDs PWM 42.3V 10-Pin VSON EP Emboss T/R (Alt: BD18336NUF-ME2)
RoHS : Compliant

150,000 : $1.5
75,000 : $1.53846
30,000 : $1.57895
15,000 : $1.62162
9,000 : $1.64384
6,000 : $1.66667
3,000 : $1.69014

15,000

BD18353EFV-ME2

ROHM Semiconductor

LED Driver Boost 1-Channel PWM 65V 20-Pin HTSSOP-B Embossed T/R (Alt: BD18353EFV-ME2)
RoHS : Compliant

125,000 : $1.275
62,500 : $1.30769
25,000 : $1.34211
12,500 : $1.37838
7,500 : $1.39726
5,000 : $1.41667
2,500 : $1.43662

12,500

18322-T011

Sumida Corporation

IND,25X21,65UH (Alt: 18322-T011)
RoHS : Compliant

18,000 : $4.98824
9,000 : $5.10843
3,600 : $5.23457
1,800 : $5.36709
1,080 : $5.4359
720 : $5.50649
360 : $5.57895

9,720

TLP183(GB-TPR,E(T

Toshiba America Electronic Components

Optocoupler Single Open Collector-OUT 3750Vrms 4-Pin SOIC Emboss T/R (Alt: TLP183(GB-TPR,E(T)
RoHS : Compliant

150,000 : $0.39459
75,000 : $0.4041
30,000 : $0.41407
15,000 : $0.42456
9,000 : $0.43
6,000 : $0.43558
3,000 : $0.44132

9,000

ECS-250-18-36B-CKY-TR

ECS International Inc

(Alt: ECS-250-18-36B-CKY-TR)
RoHS : Compliant

50,000 : $0.4
25,000 : $0.40964
10,000 : $0.41975
5,000 : $0.43038
3,000 : $0.4359
2,000 : $0.44156
1,000 : $0.44737

4,000

2301836-1

TE Connectivity

Conn High Density D Subminiature PL 37 POS 2.77mm Solder ST Through Hole (Alt: 2301836-1)
RoHS : Compliant

40,000 : $5.0
20,000 : $5.12821
8,000 : $5.26316
4,000 : $5.40541
2,400 : $5.47945
1,600 : $5.55556
800 : $5.6338

800

2118310-2

TE Connectivity

(Alt: 2118310-2)
RoHS : Compliant

10,000 : $1.20941
5,000 : $1.27663

600

PA1837NL

Pulse Electronics Corporation

(Alt: PA1837NL)
RoHS : Compliant

22,500 : $6.1425
11,250 : $6.3
4,500 : $6.46579
2,250 : $6.64054
1,350 : $6.73151
900 : $6.825
450 : $6.92113

450

ECS-270-18-33-F-TR

ECS International Inc

EIIECS-270-18-33-F-TR 27.000 MHZ SMD CRY (Alt: ECS-270-18-33-F-TR)
RoHS : Compliant

LFB183G75CT5E927

Murata Manufacturing Co Ltd

(Alt: LFB183G75CT5E927)
RoHS : Compliant

ECS-400-18-33Q-DS

ECS International Inc

Crystal, Standard, 40 MHz, SMD, 3.2mm x 2.5mm x 0.8mm, 100 ppm, 18 pF, 30 ppm, ECX-33Q (Alt: ECS-400-18-33Q-DS)
RoHS : Compliant

50,000 : $0.44706
25,000 : $0.45783
10,000 : $0.46914
5,000 : $0.48101
3,000 : $0.48718
2,000 : $0.49351
1,000 : $0.5

PT06W-18-32S

Amphenol Corporation

(Alt: PT06W-18-32S)
RoHS : Compliant

MKP1837310164W

Vishay Intertechnologies

(Alt: MKP1837310164W)
RoHS : Compliant

50,000 : $0.38588
25,000 : $0.39518
10,000 : $0.40494
5,000 : $0.41519
3,000 : $0.42597
2,000 : $0.43733
1,000 : $0.46857

AU10183954-001LF

Amphenol Corporation

(Alt: AU10183954-001LF)
RoHS : Compliant

Chip-Germany GmbH

SFH618-3

Isocom Components

RoHS : Compliant

DV183612D230B

DEV-Dorsch Electronic Vertriebs GmbH

WS18-3D460

SICK AG

DB Roberts

MS27183-6

Military Specifications

1 : $0.4962
100 : $0.2481
500 : $0.1418
1,000 : $0.0584
1,050 : $0.0584

1,050

MS51831-106.D

Military Specifications

INSERT, KEY-LOCKED DFARS COMPLIANT REQUIRED

1 : $14.6993
15 : $14.6992

4601-832-S

RAF Electronic Hardware

51-18-306-24

Southco

These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses.

AELS9-518-312W

PennEngineering (PEM)

M1118-3005-AL-40

RAF Electronic Hardware

NB08PT-18-GB1832

Avdel

NB08PT-18 TOOL GB

8183-1032-A-24

RAF Electronic Hardware

AELS8-518-312W

PennEngineering (PEM)

5/16-18

2183-1032-A

RAF Electronic Hardware

HEX FEMALE STANDOFF

4518300

SHEREX FASTENING SO

MA-07-232-183-10

Southco

AELS8-518-312B

PennEngineering (PEM)

Feature a large diameter low-profile head and knurled shank.Offers highest all around strength.

8261-832-SS-20

RAF Electronic Hardware

SS 1/4 RD OFFSET TAP 3x1

AE801-832

PennEngineering (PEM)

Totally pneumatic tool that installs Atlas SpinTite� and pre-bulbed PlusTite� fasteners into various material thickness.Also available Series 806 tool with adjustable clutch to install 4-40 to 1/4-20 thread sizes.NOTE The air supplied to the 800 and 900 s

Pasternack Enterprises US

PE3W04183/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to N Female 4 Hole Flange Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and type N 4 hole flange cable connection on the other. Our low loss reverse polarity SMA to N type cable assemblies have a plug gender on end 1 and female on end 2. PE3W04183/HS-12 can also be known as a low loss reverse polarity SMA male to N type jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N jack cable assembly PE3W04183/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA plug to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04183/HS-12 can also be used in the other direction and will be N type female 4 hole flange to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N female 4 hole flange low loss cable 12 inch length using LMR-195 coax with heatshrink.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

765

PE3W11838-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 12 Inch Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-12, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-12 is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

132

PE3FCA183-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA183-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA183-10M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements.

1 : $151.99
5 : $145.91
10 : $139.83
25 : $133.75

PE3W11838-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 60 Inch Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 60 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 60 inch length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-60, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 60 inch length.

1 : $164.99
25 : $156.74
50 : $148.49
100 : $141.89

PE3C6318-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum N Female to QMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N female to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum N female to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and QMA cable connection on the other. Our low PIM type N to QMA cable assemblies have a female gender on end 1 and male on end 2. PE3C6318-36 can also be known as a low PIM N type jack to QMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to QMA plug cable assembly PE3C6318-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N female to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6318-36 can also be used in the other direction and will be QMA male to N type female cable assembly if the opposite connectivity is required. Low PIM type N jack to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to QMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3C6183-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 7/16 DIN Male Right Angle to 7/16 DIN Female Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on one end and TC-SPP250-716F-LP 7/16 DIN cable connection on the other. Our low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable is a male to female coax assembly, PE3C6183-150CM, can also be known as a low PIM right angle TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-RA-LP 7/16 DIN plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly PE3C6183-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-RA-LP 7/16 DIN cable assembly is manufactured with right angle TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle male to TC-SPP250-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6183-150CM can also be used in the other direction and will be TC-SPP250-716F-LP 7/16 DIN female to right angle TC-SPP250-716M-RA-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-RA-LP 7/16 DIN right angle plug to TC-SPP250-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-RA-LP 7/16 DIN to TC-SPP250-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male right angle to 7/16 DIN female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

PE3C9818-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Female Low Loss Cable 36 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly TNC male to TNC female low loss cable 36 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female low loss cable 36 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assembly has male gender on end 1 and female on end 2. PE3C9818-36 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C9818-36 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9818-36 can also be used in the other direction and will be TNC female to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female low loss cable 36 inch length using TCOM-240 coax with Times Microwave components.

1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24

PE3W18305

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity Push-On MCX Plug Right Angle to SMB Jack Bulkhead Cable Using RG178 Coax. PE3W18305 is a reverse polarity MCX plug right angle to SMB jack bulkhead cable using RG178 coax. This Pasternack reverse polarity MCX plug right angle to SMB jack bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMB for connector 2. MCX right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity plug MCX right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18305 MCX reverse polarity plug right angle to SMB jack bulkhead cable assembly is constructed with RG178 coax.

PE3W18350

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using PE-P195 Coax. PE3W18350 is a SMA male to TNC female bulkhead cable using PE-P195 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18350 SMA male to TNC female bulkhead cable assembly is constructed with PE-P195 coax.

PE3W18350/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using PE-P195 Coax with HeatShrink. PE3W18350/HS is a SMA male to TNC female bulkhead cable using PE-P195 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18350/HS SMA male to TNC female bulkhead cable assembly is constructed with PE-P195 coax.

PE3W18387

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMA Male Cable Using RG58 Coax. PE3W18387 is a SMB plug right angle to SMA male cable using RG58 coax. This Pasternack SMB plug right angle to SMA male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18387 SMB plug right angle to SMA male cable assembly is constructed with RG58 coax.

PE34183LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. SMA Male to N Female Bulkhead Cable Using RG393 Coax, RoHS. PE34183LF is a SMA male to type N female bulkhead cable using RG393 coax. This Pasternack SMA male to N type female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm type N for connector 2. Our male SMA to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34183LF SMA male to type N female bulkhead cable assembly is constructed with RG393 coax.

PE3W01834LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to MCX Plug Right Angle Cable Using PE-SR405FL Coax, LF Solder. PE3W01834LF is a MCX plug right angle to MCX plug right angle cable using PE-SR405FL coax. This Pasternack MCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. MCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to plug MCX right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01834LF MCX plug right angle to MCX plug right angle cable assembly is constructed with PE-SR405FL coax.

PE3W17183/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-240 Coax with HeatShrink. PE3W17183/HS is a N male to N male right angle cable using LMR-240 coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17183/HS N male to N male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18308

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. FME Jack to N Female Cable Using LMR-195-UF Coax. PE3W18308 is a FME jack to N female cable using LMR-195-UF coax. This Pasternack FME jack to N female cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm N for connector 2. Our jack FME to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18308 FME jack to N female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.