| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow |
 Neutron USA | 195C30
| Hammond Manufacturing | Power Inductors - Leaded Choke, heavy current chassis mount, single coil, 1mH @ 30A RoHS : Compliant | | 50
 |
2661950050
| Weidmüller Interface GmbH & Co. KG | Ethernet Cables / Networking Cables HDC RJ4501 MMSCAT6-0050 RoHS : Compliant | | 13
 |
1950G-1-B-24-NA
| Dwyer Instruments Inc | Differential Pressure Switch, Explosion Proof, .4-1.6in w.c., 1950G Series | | 3
 |
1955044
| Phoenix Contact | Pluggable Terminal Blocks 3 Pos 5.08mm pitch Through Hole Header RoHS : Compliant | | 0
 |
CKM 19-19-5/S90
| TURCK Inc | CKM 19-19-5/S90; U4701-72 | | 0
 |
ATS-CPX040040012-195-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, Hole: 4-Corner, Blue Anodized, T766 RoHS : Compliant | | 0
 |
BSM BKM 19-1958-2.5/S3106
| TURCK Inc | Cordset, Str M16 M 19p to Str M16 F 19p, 19wire 2.5m, PVC jacket, U-67837 | | 0
 |
CKM 19-19-5
| TURCK Inc | CORDSET, 19-PIN, MULTIFAST, 22 AWG, 19 CONDUCTOR, 2 METERS, 4 PORTS | | 0
 |
E321195
| Elo Touch Solutions Inc | 1093L 10.1IN LCD OPEN FRAME HDMI VGA DISP PORT VID INTERF 10TCH | | 0
 |
1333195
| Phoenix Contact | USB Cable, Straight USB-C Male 24p ---- Straight USB-C Male 24p, 0.5m cable, PVC USB 3.1 black RoHS : Compliant | | 0
 |
1019518
| Phoenix Contact | Sensor / Actuator Cables 5P M16 Plg-open end 18 AWG, 0.5 m, SACC-E-MS-5CON-M16/0 5-18AWG | | 0
 |
CSSWM 19-19-5/S101
| TURCK Inc | Cordset, R/A M23 M 19pos to Cut End, 19 wire 5M, TPE Yellow, U-31103 | | 0
 |
1411953
 | Phoenix Contact | Circular Metric Connectors SACC-CIP-M12FS8PSMDS SOCKET-SHLD-TRAY RoHS : Compliant | | 0
 |
1955743
| Phoenix Contact | Pluggable Terminal Blocks 2 Pos 5.08mm pitch Through Hole Header RoHS : Compliant | | 0
 |
1957710000
| Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WAP WTL6/1 EN RoHS : Compliant | | 0
 |
 Pasternack Enterprises US | PE3W07195/HS
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Plug to TNC Male Low Loss Cable Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to TNC male low loss cable using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity TNC plug to TNC male low loss cable using LMR-240 coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC cable connection on one end and TNC cable connection on the other. Our low loss reverse polarity TNC to TNC cable assemblies have a plug gender on end 1 and male on end 2. PE3W07195/HS can also be known as a low loss reverse polarity TNC male to TNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC male to TNC plug cable assembly PE3W07195/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity TNC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07195/HS can also be used in the other direction and will be TNC male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC plug to TNC male low loss cable using LMR-240 coax with heatshrink. | | 7,790
 |
PE4195
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: RG59, Interface Type 2: RG62, Interface Type 3: RG71. BNC Male Right Angle Connector Crimp/Solder Attachment for RG59, RG62, RG71. PE4195 BNC male right angle coaxial connector has an interface type of RG59, RG62, RG71 and a 50 Ohm impedance. Pasternack BNC male connector uses shield/contact crimp/solder as an attachment method. The Pasternack right angle BNC male coaxial connector has a PTFE dielectric type. The Pasternack BNC coaxial connector has a brass body with nickel plating. Our PE4195 BNCright angle connector uses brass contact. This BNC male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male BNC connector will ship the same day as purchased. Our BNC right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well. | 1 : $39.39 25 : $37.42 50 : $35.45 100 : $33.88
|
| 2,445
 |
PE3FCA195-30M
| Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM3 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA195-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA195-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. | 1 : $164.99 5 : $158.39 10 : $151.79 25 : $145.19
|
| 110
 |
PE3C1957
| Pasternack Enterprises | | | 0
|
PE3W01954/WP-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male Right Angle to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male right angle to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W01954/WP-60 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01954/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W01954/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01954/WP-60 can also be used in the other direction and will be a TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $154.99 25 : $147.24 50 : $139.49 100 : $133.29
|
| 0
 |
PE3W19556
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to TNC Female Bulkhead Cable Using RG141 Coax. PE3W19556 is a reverse polarity SMA male right angle to TNC female bulkhead cable using RG141 coax. This Pasternack reverse polarity SMA male right angle to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19556 SMA reverse polarity male right angle to TNC female bulkhead cable assembly is constructed with RG141 coax. | | 0
 |
PE3W19598LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using PE-P047 Coax, LF Solder. PE3W19598LF is a SMA female bulkhead to SMA female bulkhead cable using PE-P047 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19598LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with PE-P047 coax. | | 0
 |
PE3W06195LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QMA Male to N Female Cable Using LMR-195 Coax, LF Solder. PE3W06195LF is a QMA male to N female cable using LMR-195 coax. This Pasternack QMA male to N female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. Our male QMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06195LF QMA male to N female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE3W19555
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity TNC Female Bulkhead Cable Using RG223 Coax. PE3W19555 is a reverse polarity SMA male right angle to reverse polarity TNC female bulkhead cable using RG223 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19555 SMA reverse polarity male right angle to TNC reverse polarity female bulkhead cable assembly is constructed with RG223 coax. | | 0
 |
PE-C195
| Pasternack Enterprises | Key Specifications, Generic Name: RG58 Type, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Velocity of Propagation: 80 %, Jacket Diameter: 0.195 in, Jacket Material: PE, No. of Shields: 2, Attenuation at 1 Ghz.: 11.7 dB, Power, Max at 1 Ghz.: 135 Watts, RF Shielding: 90 dB, Frequency, Max: 5.8 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.5 in, Minimum Bend Radius, Repeated: 2 in, Coax Type: Coax. Low Loss Flexible RG58 Type Coax Cable Double Shielded with Black PE Jacket. PE-C195 part number from Pasternack is a RG58 Type coax cable that is flexible. Pasternack PE-C195 flexible coax cable is 50 Ohm and has a PE (F) dielectric. Our PE-C195 coax is constructed with a 0.195 jacket made of PE. PE-C195 coax has a shield count of 2, a RF shielding of 90 dB and the maximum frequency for this Pasternack cable is 5.8 GHz. PE-C195 coax cable has an attenuation at 1 GHz of 11.7 dB and a maximum power of 135 watts at 1 GHz. Pasternack RG58 Type coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-C195 cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-C195 or other coax can be built and shipped same day as well. | 1 : $2.02 25 : $1.92 50 : $1.82 100 : $1.74
|
| 0
 |
PE33195/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Female to TNC Male Cable Using RG223 Coax with HeatShrink. PE33195/HS is a SMA female to TNC male cable using RG223 coax. This Pasternack SMA female to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33195/HS SMA female to TNC male cable assembly is constructed with RG223 coax. | | 0
 |
PE35195LF/HS
| Pasternack Enterprises | | | 0
 |
PE3C1956
| Pasternack Enterprises | | | 0
|
PE3W01954/WP-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male Right Angle to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male right angle to TNC male low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W01954/WP-36 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01954/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W01954/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01954/WP-36 can also be used in the other direction and will be a TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $149.99 25 : $142.49 50 : $134.99 100 : $128.99
|
| 0
 |
PE3W19540
| Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SSMC Jack Bulkhead to SSMC Jack Bulkhead Cable Using PE-SR405AL Coax. PE3W19540 is a SSMC jack bulkhead to SSMC jack bulkhead cable using PE-SR405AL coax. This Pasternack SSMC jack bulkhead to SSMC jack bulkhead cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm SSMC for connector 2. Our jack SSMC bulkhead to jack SSMC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W19540 SSMC jack bulkhead to SSMC jack bulkhead cable assembly is constructed with PE-SR405AL coax. | | 0
 |
 Vyrian | VT1195MFP
| Analog Devices Inc | | | 11,305
 |
VT1195SFQR-001
| Analog Devices Inc | | | 11,042
 |
V14X195E
| Littelfuse Inc | Varistor, 150J, Through Hole Mount RoHS : Compliant | | 10,787
 |
V07X195E
| Littelfuse Inc | Varistor, 30J, Through Hole Mount RoHS : Compliant | | 10,453
 |
VT1195SFQ
| Analog Devices Inc | | | 9,780
 |
UPA1950TE-T1-AT
| Renesas Electronics Corporation | Transistor RoHS : Compliant | | 9,750
 |
V20X195E
| Littelfuse Inc | Varistor, 300J, Through Hole Mount RoHS : Compliant | | 9,677
 |
V05X195E
| Littelfuse Inc | Varistor, 14J, Through Hole Mount RoHS : Compliant | | 9,031
 |
UPA1952TE-T1-A
| Renesas Electronics Corporation | Small Signal Field-Effect Transistor, 2A I(D), P-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | | 8,627
 |
VT1195SFQ-001
| Analog Devices Inc | | | 7,822
 |
V11X195E
| Littelfuse Inc | Varistor, 75J, Through Hole Mount RoHS : Compliant | | 7,230
 |
V10X195E
| Littelfuse Inc | Varistor, 49J, Through Hole Mount RoHS : Compliant | | 4,042
 |
VC-709-119-50M0000000
| Microchip Technology Inc | LVPECL Output Clock Oscillator, 50MHz Nom RoHS : Compliant | | 1,994
 |
VM19558100J0G
| Amphenol Communications Solutions | Barrier Strip Terminal Block, 20A, 2.5mm2, 1 Row(s), 1 Deck(s) | | 240
 |
VM19550300J0G
| Amphenol Communications Solutions | Barrier Strip Terminal Block, 20A, 2.5mm2, 1 Row(s), 1 Deck(s) | | 214
 |
 Waytek, Inc. | 19140-0195
| Molex | 16-14 GA #10 Spade Terminal Non-Insulated | 100 : $0.0921 200 : $0.0837 500 : $0.0747 1,000 : $0.0676 5,000 : $0.0645
|
| 18,715
 |
12059195
| Aptiv PLC | 6 Way TPA #12059195 | 50 : $0.1863 200 : $0.1775 500 : $0.1654 1,000 : $0.1598
|
| 8,806
 |
7000001957
| 3M | Dual Lock 1" x 50 YDS Spool Black 3M # SJ-3541 Type 400 | 1 : $441.39 5 : $418.82 10 : $409.16
|
| 10
 |
880195400
| Littelfuse Inc | 600 A HPDM 2 Pole Mega Fuse Module 48V IP69K Sealed | 1 : $201.12 5 : $193.6 10 : $187.3 25 : $177.26 50 : $170.96
|
| 3
 |
 Win Source Electronics | GRM3195C1H104JA05D
| Murata Manufacturing Co Ltd | CAP CER 0.1UF 50V C0G/NP0 1206 / 0.1 µF ±5% 50V Ceramic Capacitor C0G, NP0 1206 (3216 Metric) RoHS : Compliant | 2,275 : $0.132 1,700 : $0.1472 1,315 : $0.1522 955 : $0.1573 620 : $0.1624 255 : $0.1979
|
| 990,000
 |
CSD19538Q2T
 | Texas Instruments | MOSFET N-CH 100V 13.1A 6WSON / N-Channel 100 V 13.1A (Tc) 2.5W (Ta), 20.2W (Tc) Surface Mount 6-WSON (2x2) RoHS : Compliant | 1,065 : $0.2817 855 : $0.2932 660 : $0.3046 460 : $0.3275 295 : $0.339 140 : $0.3619
|
| 54,410
 |
AD8195ACP
| Analog Devices Inc | HDMI/DVI Buffer with Equalization LFCSP-40 | 126 : $2.3817 95 : $2.6565 73 : $2.7481 53 : $2.8397 35 : $2.9313 14 : $3.5726
|
| 17,199
 |
HT66F3195
| Holtek Semiconductor Inc | SSOP-28-150mil Microcontrollers RoHS RoHS : Compliant | 405 : $0.7429 305 : $0.8286 235 : $0.8572 170 : $0.8858 110 : $0.9143 45 : $1.1143
|
| 15,000
 |
INA195AIDBV
| Texas Instruments | Current Sense Amplifier 80V 500kHz SOT-23-5 | 126 : $2.3817 95 : $2.6565 73 : $2.7481 53 : $2.8397 35 : $2.9313 14 : $3.5726
|
| 15,000
 |
1-2199119-5
| TE Connectivity | CONN M.2 FMALE 67POS 0.020 GOLD RoHS : Compliant | 345 : $0.8726 260 : $0.9733 200 : $1.0069 145 : $1.0404 95 : $1.074 40 : $1.3089
|
| 12,000
 |
CSD19505KCS
 | Texas Instruments | MOSFET N-CH 80V 150A TO220-3 / N-Channel 80 V 150A (Ta) 300W (Tc) Through Hole TO-220-3 RoHS : Compliant | 240 : $1.4188 180 : $1.5826 140 : $1.6371 100 : $1.6916 65 : $1.7462 30 : $2.1282
|
| 10,000
 |
REF195ES
 | Analog Devices Inc | IC VREF SERIES 0.04% 8SOIC RoHS : Not Compliant | 54 : $5.5891 41 : $6.2339 32 : $6.4489 23 : $6.6639 15 : $6.8788 6 : $8.3836
|
| 7,675
 |
MAX1951ESA+T
 | Maxim Integrated Products | IC REG BUCK ADJ 2A SYNC 8SOIC RoHS : Compliant | 41 : $8.2245 33 : $8.5588 26 : $8.8931 18 : $9.5619 12 : $9.8962 6 : $10.5648
|
| 6,030
 |
REF195ESZ-REEL
 | Analog Devices Inc | IC VREF SERIES 5V 8SOIC RoHS : Compliant | 58 : $5.2182 47 : $5.4304 36 : $5.6425 25 : $6.0667 16 : $6.2788 8 : $6.7031
|
| 5,500
 |
F1958NBGK
| Renesas Electronics Corporation | 7-BIT 0.25DB DIGITAL STEP ATTENU / RF Attenuators 31.75dB 1 MHz ~ 6 GHz 50 Ohms 24-WFQFN Exposed Pad RoHS : Compliant | 6 : $55.7143 5 : $62.1429 4 : $64.2858 3 : $66.4286 2 : $68.5715 1 : $83.5715
|
| 4,085
 |
MAX1951AESA+T
| Maxim Integrated Products | IC REG BUCK ADJ 2A SYNC 8SOIC RoHS : Compliant | 84 : $4.6714 63 : $5.2104 48 : $5.3901 35 : $5.5698 23 : $5.7493 10 : $7.0069
|
| 2,396
 |
AD8195ACPZ
 | Analog Devices Inc | IC VIDEO HDMI/DVI BUFFER 40LFCSP / Video Buffer IC Parallel HDMI 1.3a 40-LFCSP-VQ (6x6) Package RoHS : Compliant | 65 : $4.68 48 : $5.22 38 : $5.4 27 : $5.58 18 : $5.76 8 : $7.02
|
| 1,750
 |
AD8195ACPZ-R7
 | Analog Devices Inc | IC VIDEO HDMI/DVI BUFFER 40LFCSP / Video Buffer IC Parallel HDMI 1.3a 40-LFCSP-VQ (6x6) Package RoHS : Compliant | 61 : $4.9918 45 : $5.5678 35 : $5.7598 26 : $5.9517 17 : $6.1437 7 : $7.4877
|
| 1,500
 |
CSD19531KCS
 | Texas Instruments | MOSFET N-CH 100V 100A TO220-3 RoHS : Compliant | 54 : $5.591 43 : $5.8182 34 : $6.0455 24 : $6.5001 15 : $6.7273 7 : $7.1819
|
| 700
 |