| Electronic Components Datasheet Search |
|
20176220ACNUMNFZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | T2111027201-702 | TE Connectivity | Contact; female; copper alloy; silver plated; 28AWG÷20AWG; 5A; 50V RoHS : Compliant |
| 96 | |
| 2017 | VISATON GmbH & Co KG | Loudspeaker; general purpose; 8W; 8Ω; 66.5x66.5x37mm; 120÷20000Hz |
| 28 | ||
| 66.2017-10021 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1000V |
| 9 | ||
| 66.2017-10022 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1000V |
| 8 | ||
| 0620 170 | RECA | Drill bit; for metal; Ø: 17mm; L: 125mm; high speed steel HSS-O |
| 1 | ||
| ZCAT2017-0930B-BK | TDK Corporation | Ferrite: two-piece; on round cable; A: 21mm; B: 17mm; C: 9mm; D: 20mm RoHS : Compliant |
| 0 | ||
| XC6221A2017R-G | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 2V; 250mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
| 10.01.02.01728 | Schmalz | Spring plunger; 0÷80°C; FSTIm |
| 0 | ||
| 0201702 | Phoenix Contact | Protection; spring clamp; PA; L: 27.5mm; W: 4.6mm; H: 27.5mm RoHS : Compliant |
| 0 | ||
| 66.2017-07530 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1000V |
| 0 | ||
| 66.2017-20030 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1000V |
| 0 | ||
| 7000-51201-7900150 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; M12 male angled,RJ45 plug; 1.5m; 60VDC |
| 0 | ||
| 7000-51201-7900600 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; M12 male angled,RJ45 plug; 6m; 60VDC |
| 0 | ||
| 3RT2017-2XB42-0LA2 | Siemens | Contactor: 3-pole; NO x3; Auxiliary contacts: NC; 24÷34VDC; 12A |
| 0 | ||
STPS20170CFP![]() | STMicroelectronics | Diode: Schottky rectifying; THT; 170V; 10Ax2; TO220FP; Ufmax: 0.99V RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 402017300 | CONVER | AVAILABLE EU | 16,380 | ||
![]() NexGen Digital | TRF372017IRGZR![]() | Texas Instruments | RoHS : Compliant | 9 | ||
![]() PUI | 620-1701-FBW | RCD Components Inc | RoHS : Compliant | 100 | ||
![]() Richardson RFPD | M3051-000002-017BG![]() | TE Connectivity | Industrial Pressure Sensor 0bar to 17bar Gage 4-Pi RoHS : Compliant |
| 0 | |
| CR201-75VE | Ohmite Mfg Co | Heat Sink Passive TO-247/TO-264 Vertical Clip Alum RoHS : Compliant |
| 0 | ||
| GN2017AINE3 | Semtech Corporation | CDR 3.3V 32-PIN QFN RoHS : Not Compliant | 0 | |||
| DM182017-4 | Microchip Technology Inc | SX1239 RF Transceiver Development Kit RoHS : Compliant | 0 | |||
| ATS-CPX030030020-171-C3-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Screw Mount Aluminum 60 RoHS : Compliant |
| 0 | ||
ATS-CPX035035020-177-C1-R0![]() | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Screw Mount Aluminum 60 RoHS : Compliant |
| 0 | ||
| R180052017 | Radiall | NEX10 M SL STR SD.141 C50 RoHS : Compliant | 0 | |||
| SI5341B-D12017-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| R162017000W | Radiall | Conn Type N 0Hz to 1.5GHz 75Ohm ST Cable Mount PL RoHS : Compliant |
| 0 | ||
| BMR4562112/017 | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| CGSE2017 | Knowles CDE | FILM CAPACITOR RoHS : Not Compliant | 0 | |||
| 9004-100-2017 | Spectrum Control | EMI Filter Low Pass T-Circuit 15A 80VDC Solder Lug |
| 0 | ||
| UM0062-017-NB-1 | LICAP Technologies Inc | SUPERCAP ULTRACAP RoHS : Compliant |
| 0 | ||
| GN2017AINTE3Z | Semtech Corporation | Multi Lane Signal Conditional RoHS : Not Compliant | 0 | |||
| ATS012012017-SF-2P | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Straight Adhesive Aluminum 1 RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | DR-PC20-1-7000 | JAE Electronics | INSTOCK | 1,355,900 | ||
| 501190-2017 | Molex | INSTOCK RoHS : Compliant | 135,183 | |||
| DS1042-24-2017VBR16010 | INSTOCK | 51,226 | ||||
| 49597-2017 | Molex | INSTOCK RoHS : Compliant | 48,360 | |||
| 72.01.741 | ETTGR | INSTOCK | 4,158 | |||
| MC12017P | INSTOCK | 2,435 | ||||
| MC12017P | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 2,435 | |||
| BN 20173 30X5 | INSTOCK | 1,044 | ||||
| 104486 A1A 27.06.2017 | INSTOCK | 39 | ||||
M28F201-70K1![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 34 | |||
| 104567 A1 11.10.2017 | INSTOCK | 12 | ||||
| NAS1922-0175-3 | INSTOCK | 6 | ||||
| M28F201-70K1 | INSTOCK | 5 | ||||
| 104492 A1A 09.08.2017 | INSTOCK | 2 | ||||
| 104508 A1 15.02.2017 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 2201778-1 | TE Connectivity | Memory Card Connector MicroSD PushPush Copper Gold Plated Contacts - Tape and Reel (Alt: 2201778-1) RoHS : Compliant | 37,000 | ||
| CRCW020175K0FNED | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 1 50 mW 0201 0603 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW020175K0FNED) RoHS : Compliant | 30,000 | |||
| 5011902017 | Molex | Pin Header WiretoBoard 1 mm 2 Rows 20 Contacts Surface Mount Straight PicoClasp 501190 - Tape and Reel (Alt: 5011902017) RoHS : Compliant | 9,900 | |||
| 540-88-020-17-400 | PRECI-DIP SSA | Conn PLCC Socket SKT 20 POS 127mm Solder ST SMD TR (Alt: 540-88-020-17-400) RoHS : Compliant | 5,780 | |||
| 5011902017 | Molex | Pin Header WiretoBoard 1 mm 2 Rows 20 Contacts Surface Mount Straight PicoClasp 501190 - Tape and Reel (Alt: 5011902017) RoHS : Compliant | 4,400 | |||
| 2201789 | Phoenix Contact | (Alt: 2201789) RoHS : Compliant | 100 | |||
| 13720177 | Aptiv PLC | ASM TERM F DSQ 15 AU 13720177 (Alt: 13720177) RoHS : Compliant | 0 | |||
| 10820171 | Aptiv PLC | Conn Housing F 3 POS 333mm ST Cable Mount (Alt: 10820171) RoHS : Compliant | 0 | |||
| 24572017 | nVent Schroff | Desktop Case IP20 6U 3155mm Depth (Alt: 24572017) RoHS : Compliant | 0 | |||
| 205201-7 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 205201-7) RoHS : Compliant | 0 | |||
| 205201-7 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece (Alt: 205201-7) RoHS : Compliant | 0 | |||
| ZCAT2017-0930 | TDK Corporation | Split Core Ferrite 9 mm 10 MHz 500 MHz 50 Ohm (Alt: ZCAT2017-0930) RoHS : Compliant | 0 | |||
| 97-3106B-20-17P | Amphenol Corporation | Conn MILC5015 Circular PIN 6 POS Solder ST Cable Mount 6 Terminal 1 Port (Alt: 97-3106B-20-17P) RoHS : Not Compliant | 0 | |||
| ZCAT2017-0930B-BK | TDK Corporation | (Alt: ZCAT2017-0930B-BK) RoHS : Not Compliant | 0 | |||
M3051-000002-017BG![]() | TE Connectivity | Pressure Sensor 0V to 01V 0bar to 17bar Gauge (Alt: M3051-000002-017BG) RoHS : Compliant | 0 | |||
![]() Avnet Silica | XP231P02017R-G | Torex Semiconductor LTD | (Alt: XP231P02017R-G) RoHS : Compliant | 32,000 | ||
| APX803L20-17C3-7 | Diodes Incorporated | Processor Supervisor 17255V 12V to 5V 3Pin SOT323 TR (Alt: APX803L20-17C3-7) RoHS : Compliant | 3,000 | |||
STPS20170CG-TR![]() | STMicroelectronics | Schottky Rectifier 170 V 20 A Dual Common Cathode TO263 D2PAK 3 Pins 990 mV (Alt: STPS20170CG-TR) RoHS : Compliant | 2,000 | |||
STPS20170CT![]() | STMicroelectronics | Diode Schottky 170V 20A 3Pin3Tab TO220AB Tube (Alt: STPS20170CT) RoHS : Compliant | 0 | |||
| MIC2017YM6-TR | Microchip Technology Inc | (Alt: MIC2017YM6-TR) RoHS : Compliant | 0 | |||
| TEA2017DK1007 | NXP Semiconductors | TEA2017DK1007 (Alt: TEA2017DK1007) RoHS : Compliant | 0 | |||
| XC6221A2017R-G | Torex Semiconductor LTD | (Alt: XC6221A2017R-G) RoHS : Compliant | 0 | |||
| R5F12017MSP#50 | Renesas Electronics Corporation | (Alt: R5F12017MSP#50) RoHS : Compliant | 0 | |||
| PI6CV304LEX-2017 | Diodes Incorporated | Clock Buffer 55 Duty Cycle 160MHz 4OUT 8Pin TSSOP W TR (Alt: PI6CV304LEX-2017) RoHS : Compliant | 0 | |||
| PI5C3309UEX-2017 | Diodes Incorporated | Bus Switch 1 Channel 15 Ohm 120 mA 8 Pins MSOP (Alt: PI5C3309UEX-2017) RoHS : Compliant | 0 | |||
| APX803L20-17SA-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX803L20-17SA-7) RoHS : Compliant | 0 | |||
| PI7C9X130DNDE-2017 | Diodes Incorporated | (Alt: PI7C9X130DNDE-2017) RoHS : Compliant | 0 | |||
| PI3EQX7741AIZDEX-2017 | Diodes Incorporated | (Alt: PI3EQX7741AIZDEX-2017) RoHS : Compliant | 0 | |||
SST39VF3201-70-4I-B3KE![]() | Microchip Technology Inc | NOR Flash Parallel 33V 32Mbit 2M x 16bit 70ns 48Pin TFBGA (Alt: SST39VF3201-70-4I-B3KE) RoHS : Compliant | 0 | |||
| L135-4080SA35000P1-CUS 201755 | Lumileds | LMIL1354080SA35000P1 (Alt: L135-4080SA35000P1) RoHS : Compliant | 0 | |||
![]() DB Roberts | 2017 | Heyco | SB 375-281 BLACK | 0 | ||
| 020172A025 | Essentra Components | 82 SLOTTED CSK SCREW, 1-72 THR | 0 | |||
| 07269-12017 | Avdel | POCHETTE DE JOINTS POUR 7267TE | 0 | |||
| D7-201-711-010 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to | 0 | |||
| D8-314-220-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| 50M120175J040 | Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.75 | 0 | |||
| 47-65-201-74 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 50M120175J060B | Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.75 | 0 | |||
| 68020176 | Pop Rivets | FAN275-198 PROSET 2500 REDUCED | 0 | |||
| D8-316-620-170 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| 50M120175J035 | Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.75 | 0 | |||
| 0020170000VR | Essentra Components | 0 | ||||
| 50M120175J025 | Essentra Components | HEX UNSLOTTED BOLT, M12 X 1.75 | 0 | |||
| 0325020175FT | Essentra Components | 0 | ||||
| M2017-B-4007-S-12 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | STPS20170CT![]() | STMicroelectronics | Diode Schottky 170V 20A 3Pin3Tab TO220AB Tube (Alt: STPS20170CT) RoHS : Compliant | 15,000 | ||
| TPD2017FN,L1F(S | Toshiba America Electronic Components | (Alt: TPD2017FN,L1F(S) RoHS : Compliant | 2,000 | |||
STPS20170CFP![]() | STMicroelectronics | Schottky Rectifier 170 V 20 A Dual Common Cathode TO220FP 3 Pins 900 mV (Alt: STPS20170CFP) RoHS : Compliant | 850 | |||
SST39VF3201-70-4I-EKE![]() | Microchip Technology Inc | NOR Flash Parallel 33V 32Mbit 2M x 16bit 70ns 48Pin TSOP (Alt: SST39VF3201-70-4I-EKE) RoHS : Compliant | 96 | |||
| S00027120174 | SIMCom | RF Components (Alt: S00027120174) RoHS : Not Compliant | 0 | |||
| MIC2017YM6-TR | Microchip Technology Inc | (Alt: MIC2017YM6-TR) RoHS : Compliant | 0 | |||
| TEA2017AAT/2Y | NXP Semiconductors | Digital MultiMode PFC IC LLC Combo Controller 182 V to 197 V 40 C to 150 C SOIC16 (Alt: TEA2017AAT/2Y) RoHS : Compliant | 0 | |||
| TEA2017DB1580 | NXP Semiconductors | Demo Board TEA2017AAT Power Management Resonant Controller (Alt: TEA2017DB1580) RoHS : Compliant | 0 | |||
| TEA2017AAT/3Y | NXP Semiconductors | (Alt: TEA2017AAT/3Y) RoHS : Compliant | 0 | |||
STPS20170CG-TR![]() | STMicroelectronics | Schottky Rectifier 170 V 20 A Dual Common Cathode TO263 D2PAK 3 Pins 990 mV (Alt: STPS20170CG-TR) RoHS : Compliant | 0 | |||
SST39VF3201-70-4C-EKE![]() | Microchip Technology Inc | NOR Flash Parallel 33V 32Mbit 2M x 16bit 70ns 48Pin TSOP (Alt: SST39VF3201-70-4C-EKE) RoHS : Compliant | 0 | |||
SST39VF3201-70-4C-B3KE![]() | Microchip Technology Inc | NOR Flash Parallel 33V 32Mbit 2M x 16bit 70ns 48Pin TFBGA (Alt: SST39VF3201-70-4C-B3KE) RoHS : Compliant | 0 | |||
SST39VF3201-70-4I-EKE-T![]() | Microchip Technology Inc | (Alt: SST39VF3201-70-4I-EKE-T) RoHS : Compliant | 0 | |||
![]() ECCO | 10-825962-017 | Amphenol Industrial Operations |
| 50 | ||
| CA3102E20-17P | ITT Interconnect Solutions | RoHS : Not Compliant | 10 | |||
| MS3102R20-17P | ITT Interconnect Solutions | RoHS : Not Compliant |
| 10 | ||
| CA3102R20-17P | ITT Interconnect Solutions | 10 | ||||
| MS3102E20-17P | ITT Interconnect Solutions | RoHS : Not Compliant |
| 10 | ||
| MS3102E20-17PF80 | ITT Interconnect Solutions | 7 | ||||
| CA3102E20-17PF80 | ITT Interconnect Solutions | RoHS : Not Compliant | 7 | |||
![]() FDH Electronics | MS3406D20-17SW | Corsair Electrical Connectors Inc | Connector |
| 89 | |
| MS3406D20-17SW-LC | Corsair Electrical Connectors Inc | Connector |
| 89 | ||
| MS3450KS20-17PW | Corsair Electrical Connectors Inc | Connector |
| 79 | ||
| MS3454W20-17PX-LC | Corsair Electrical Connectors Inc | Connector |
| 58 | ||
| MS3404D20-17EY-LC | Corsair Electrical Connectors Inc | Connector |
| 55 | ||
| MS3451L20-17P-LC | Corsair Electrical Connectors Inc | Connector 5015 |
| 27 | ||
| MS3402D20-17AW | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3402D20-17PX-LC | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3454W20-17SX | Corsair Electrical Connectors Inc | Connector |
| 13 | ||
| MS3456LS20-17S-LC | Corsair Electrical Connectors Inc | Connector 5015 |
| 13 | ||
| MS3456W20-17SX-LC | Corsair Electrical Connectors Inc | Connector |
| 13 | ||
| MS3401D20-17EX-LC | Corsair Electrical Connectors Inc | Connector |
| 12 | ||
| MS3452L20-17BY | Corsair Electrical Connectors Inc | Connector |
| 6 | ||
| MS3452W20-17B | Corsair Electrical Connectors Inc | Connector |
| 6 | ||
| MS3454LS20-17AW | Corsair Electrical Connectors Inc | Connector |
| 4 | ||
![]() Flip Electronics | R5F12017ASP#70 | Renesas Electronics Corporation | Stock | 4,900 | ||
| HAF2017-90L-E | Renesas Electronics Corporation | Stock | 2,209 | |||
| R5F12017GSP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 967 | |||
![]() Pasternack Enterprises US | PE3MP2017 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) cable. | 775 | ||
| PE34201-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Male to N Female Bulkhead Cable 72 Inch Length Using RG178 Coax., Radio frequency assembly N male to N female bulkhead cable 72 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 72 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE34201-72, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE34201-72 is built with RG178 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34201-72 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 72 inch length using RG178 coax. |
| 334 | ||
| PE3MP2017-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 36" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-36 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-36 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable. |
| 155 | ||
| PE3MP2017-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 60" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-60 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-60 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 60" cable. RoHS : Unknown |
| 155 | ||
| PE3MP2017-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 12" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-12 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-12 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 12" cable. |
| 155 | ||
| PE3W20175-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Non-Magnetic Cable 6 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3W20175-6 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20175-6 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3W20175-6 RF cable has a copper jacket. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20175-6 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 85 | ||
| PE3W20175-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Non-Magnetic Cable 36 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3W20175-36 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20175-36 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3W20175-36 RF cable has a copper jacket. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20175-36 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 14 | ||
| PE3TC0201-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-80TEST, RF Cable Type: PE-TC195, RF Cable Impedance: 50 Ohm, Length: 72 inches. PE-TC195 Series Phase Stable Test Cable SMA Male to SMA Male to 27 GHz 72 Inch Length ,RoHS., Radio frequency assembly PE-TC195 series phase stable test cable SMA male to SMA male to 27 GHz 72 inch length ,RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. PE-TC195 series phase stable test cable SMA male to SMA male to 27 GHz 72 inch length ,RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3TC0201-72, can also be known as a precision SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3TC0201-72 is built with PE-TC195 which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 27 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this PE-TC195 series phase stable test cable SMA male to SMA male to 27 GHz 72 inch length ,RoHS. |
| 3 | ||
| PE3W20178LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using PE-C100-LSZH Coax with HeatShrink, LF Solder. PE3W20178LF/HS is a SMA female to SMA female cable using PE-C100-LSZH coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20178LF/HS SMA female to SMA female cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE88X2017 | Pasternack Enterprises | Key Specifications, Input Frequency, Min: 450 MHz, Input Frequency, Max: 600 MHz, Output Frequency, Min: 1.35 GHz, Output Frequency, Max: 1.8 GHz, Input VSWR, Max: 1.8, Output VSWR, MAX: 2.2. Active 3x Frequency Multiplier, 1350 MHz to 1800 MHz Output Frequency, 9 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2017 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 450 MHz and a maximum frequency input of 600 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 1.35 GHz and output maximum frequency of 1.8 GHz. SMA frequency doubler / multiplier PE88X2017 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 0 | ||
| PE3W20176 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. BMMA Male Bulkhead to SMA Male Cable Using RG405 Coax. PE3W20176 is a BMMA male bulkhead to SMA male cable using RG405 coax. This Pasternack BMMA male bulkhead to SMA male cable assembly uses a 50 Ohm BMMA for connector 1 and a 50 Ohm SMA for connector 2. Our male BMMA bulkhead to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20176 BMMA male bulkhead to SMA male cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W20177 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. QMA Male to Mini UHF Female Cable Using LMR-195-UF Coax. PE3W20177 is a QMA male to Mini UHF female cable using LMR-195-UF coax. This Pasternack QMA male to Mini UHF female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male QMA to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20177 QMA male to Mini UHF female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02017 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Male to MCX Plug Right Angle Cable Using LMR-100 Coax. PE3W02017 is a TNC male to MCX plug right angle cable using LMR-100A coax. This Pasternack TNC male to MCX plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MCX for connector 2. TNC to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02017 TNC male to MCX plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W20170 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to SMA Male Cable Using PE-034SR Coax. PE3W20170 is a 2.92mm male right angle to SMA male cable using PE-034SR coax. This Pasternack 2.92mm male right angle to SMA male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20170 2.92mm male right angle to SMA male cable assembly is constructed with PE-034SR coax. | 0 | |||
| PE3W22017 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 1.85mm Female Bulkhead to BNC Female Bulkhead Cable Using PE-P086HF Coax. PE3W22017 is a 1.85mm female bulkhead to BNC female bulkhead cable using PE-P086HF coax. This Pasternack 1.85mm female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 1.85mm bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22017 1.85mm female bulkhead to BNC female bulkhead cable assembly is constructed with PE-P086HF coax. | 0 | |||
![]() TE Connectivity | 205201-7 | TE Connectivity | SOCKET CONT. Contact Mating Area Plating Material: Gold Flash Contact Type: Socket Wire Size: 24 – 20 AWG Wire Size: .2 – .6 mm² Contact Retention Type Within Housing: Snap-In Gold Flash Socket 24 – 20 AWG .2 – .6 mm² | Connector Contact | Part Number: 205201-7 | Internal Number: 205201-7 | TE Connectivity RoHS : Compliant |
| 15,321 | |
| 745201-7 | TE Connectivity | 09 HDE AP RECEPT, LEAD FREE Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Wire-to-Wire Connector Mounting Type: Free-Hanging (In-Line) Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Wire-to-Wire Free-Hanging (In-Line) | Part Number: 745201-7 | Internal Number: 745201-7 | TE Connectivity RoHS : Compliant |
| 1,919 | ||
| T2111027201-702 | TE Connectivity | HMN-Q3-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 8 Wire Size: 28 – 20 AWG Contact Current Rating (Max): 5 A Socket Insert for Contacts 8 28 – 20 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-702 | Internal Number: T2111027201-702 | TE Connectivity RoHS : Compliant |
| 96 | ||
| 1SNG622017R0000 | TE Connectivity | EP-SIG-SZ20-GR-D Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Snap-In Primary Product Material: PA 6 Clamping Diameter Range: 7 – 13 mm Primary Product Color: Gray Cable Gland Snap-In PA 6 7 – 13 mm | Snap-In Type Plastic Cable Gland | Part Number: 1SNG622017R0000 | Internal Number: 1SNG622017R0000 | Gray | TE Connectivity RoHS : Compliant |
| 56 | ||
| T2111027201-701 | TE Connectivity | HMN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 4 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 4 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-701 | Internal Number: T2111027201-701 | TE Connectivity RoHS : Compliant |
| 31 | ||
| 2349201-7 | TE Connectivity | SFP56 STACKED 2X12 RECEPTACLE ASSEMBLY High Speed I/o | Part Number: 2349201-7 | Internal Number: 2349201-7 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Venkel Ltd. | C0402HQN201-7R0CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.25pF RoHS : Compliant | 0 | ||
| C0402HQN201-7R7CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.7pF;�0.25pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R4CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.4pF;�0.25pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R2CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.2pF;�0.25pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R5DNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.5pF;�0.5pF RoHS : Compliant | 0 | |||
| C1111HQN201-7R0DNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;7pF;�0.5pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R8BNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.8pF;�0.1pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R0DNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.5pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R3BNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.3pF;�0.1pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R6CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.6pF;�0.25pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R0BNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.1pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R8DNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.8pF;�0.5pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R4DNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.4pF;�0.5pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R6BNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.6pF;�0.1pF RoHS : Compliant | 0 | |||
| C0402HQN201-7R8CNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;7.8pF;�0.25pF RoHS : Compliant | 0 | |||
![]() Vyrian | APX803L20-17W5-7 | Diodes Incorporated | Power Supply Support Circuit, Fixed, 1 Channel, +1.7V, PDSO5 | 16,692 | ||
| 356-019-520-178 | EDAC Inc | Card Edge Connector, 19 Contact(s), 1 Row(s), Female, Straight, 0.156 inch Pitch, Solder Terminal, #4-40unc, Black Insulator RoHS : Compliant | 15,955 | |||
2201747![]() | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 10,819 | |||
STPS20170CFP![]() | STMicroelectronics | Rectifier Diode, Schottky, 1 Phase, 2 Element, 10A, 170V V(RRM), Silicon, TO-220AB RoHS : Compliant | 10,743 | |||
TMS28F020-17C4DDQ![]() | Texas Instruments | Flash, 256KX8, 170ns, PTSO32 RoHS : Not Compliant | 7,702 | |||
| GC2520-17 | Microchip Technology Inc | Step Recovery Diode, Silicon RoHS : Compliant | 7,677 | |||
| 1982017 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,628 | |||
2201766![]() | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 6,202 | |||
| TMS28F020-17C5DDQ4 | Texas Instruments | Flash, 256KX8, 170ns, PDSO32 RoHS : Not Compliant | 6,037 | |||
| 2201731 | Phoenix Contact | Modular Terminal Block, 8A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,018 | |||
2201769![]() | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 5,715 | |||
TMS28F020-17C5DDQ![]() | Texas Instruments | Flash, 256KX8, 170ns, PTSO32 RoHS : Not Compliant | 5,482 | |||
| DW-20-17-G-S-260 | Samtec Inc | Board Stacking Connector, 20 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 5,009 | |||
TMS28F020-17C5DDE![]() | Texas Instruments | Flash, 256KX8, 170ns, PTSO32 RoHS : Not Compliant | 4,623 | |||
| SKNA20/17 | SEMIKRON | Rectifier Diode, Avalanche, 1 Phase, 1 Element, 22A, 1700V V(RRM), Silicon RoHS : Compliant | 370 | |||
![]() Waytek, Inc. | 20170 | Hillsdale Terminal & Tool Inc | The Standard Vinyl Butt Connector is an insulated crimp splice designed to securely join 1614 Ga. wires in low-voltage electrical systems. Featuring a butted seam barrel with blue vinyl insulation, it provides reliable conductivity and protection against abrasion and corrosion. The color-coded design ensures quick size identification and consistent crimp performance, making it ideal for automotive, marine, and industrial wiring applications. |
| 191,370 | |
![]() Win Source Electronics | PT7C4511WEX-2017 | Diodes Incorporated | XO CLOCK SO-8 |
| 31,670 | |
| 2201778-1 | TE Connectivity | MICRO SD PUSH PUSH LOW PROFILE T / 8 Position Card Connector Secure Digital - microSD? Surface Mount, Right Angle Gold-Palladium RoHS : Compliant |
| 9,082 | ||
TSC2017IYZGT![]() | Texas Instruments | IC CTRLR TCH SCREEN I2C 12DSBGA RoHS : Compliant |
| 8,646 | ||
TSC2017IYZGR![]() | Texas Instruments | IC CTRLR TCH SCREEN I2C 12DSBGA RoHS : Compliant |
| 8,576 | ||
| 501190-2017 | Molex | 1.0 WTB WAFER ASSY 20CKT EMBSTP RoHS : Compliant |
| 4,273 | ||
SST39VF3201-70-4I-EKE![]() | Microchip Technology Inc | NOR Flash Parallel 3.3V 32M-bit 2M x 16 70ns 48-Pin TSOP Tray / IC FLASH 32MBIT 70NS 48TSOP RoHS : Compliant |
| 3,081 | ||
| HCTL-2017-A00 | Broadcom Limited | IC DECODER/COUNTER 16BIT 16-DIP RoHS : Compliant |
| 1,111 | ||
SST39VF3201-70-4C-EKE![]() | Microchip Technology Inc | IC FLASH 32MBIT 70NS 48TSOP RoHS : Compliant |
| 960 | ||
SST39VF3201-70-4C-EKE-T![]() | Microchip Technology Inc | IC FLASH 32M PARALLEL 48TSOP RoHS : Compliant |
| 880 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |