202-6-RV Price, Distributor, Stock

Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to MCX Plug Cable Using RG178 Coax with HeatShrink., Pasternack’s PE3W20290/HS right angle MMBX plug to MCX plug RF cable assembly using RG178 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMBX plug to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMBX cable connection on one end and a MCX cable connection on the other. Our MMBX to MCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3W20290/HS can also be known as a right angle MMBX male to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20290/HS RF cable has an FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle MMBX plug to MCX plug cable has a maximum VSWR of 1.4:1. This PE3W20290/HS MMBX male to MCX male cable assembly is built with RG178, which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W20290/HS can also be used in the other direction and will be a MCX plug to right angle MMBX plug cable assembly if the opposite connectivity is required. This MMBX right angle male to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to MCX cable assembly for quick shipment worldwide. Variations of MMBX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to MCX RF cable assembly as per your requirements.

1,765

PE3FCA202

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Aqua. Pasternack’s PE3FCA202 fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA202 fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

746

PE3W20290/HS-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. Snap-On MMBX Plug Right Angle to MCX Plug Cable 9 Inch Length Using RG178 Coax with HeatShrink., Pasternack’s PE3W20290/HS-9 right angle MMBX plug to MCX plug RF cable assembly using RG178 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMBX plug to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMBX cable connection on one end and a MCX cable connection on the other. Our MMBX to MCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3W20290/HS-9 can also be known as a right angle MMBX male to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20290/HS-9 RF cable has an FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle MMBX plug to MCX plug cable has a maximum VSWR of 1.4:1. This PE3W20290/HS-9 MMBX male to MCX male cable assembly is built with RG178, which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20290/HS-9 can also be used in the other direction and will be a MCX plug to right angle MMBX plug cable assembly if the opposite connectivity is required. This MMBX right angle male to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to MCX cable assembly for quick shipment worldwide. Variations of MMBX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to MCX RF cable assembly as per your requirements.

1 : $107.43
10 : $103.13
25 : $98.84
100 : $94.54

353

M39012/02-0503

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 11 GHz, Interface Type 1: RG55, Interface Type 2: RG142. N Female Connector Crimp/Solder Attachment for RG55, RG142. M39012/02-0503 type N female coaxial connector is a QPL listed part that has an interface type of RG55 and RG142 and a 50 Ohm impedance. Pasternack's type N female connector uses crimp/solder as an attachment method. Our female type N coaxial connector provides a maximum frequency of 11 GHz. The Pasternack type N female coaxial connector has a PTFE dielectric type and a VSWR of 1.25:1. Pasternack's type N coaxial connector has a brass body with silver plating. Our M39012/02-0503 type N connector uses beryllium copper inner contact and brass outer contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This type N connector has a gold inner contact plating and a silver outer contact plating. The Pasternack type N female connector has a dielectric withstanding voltage of 2,500 Vrms. This Pasternack female type N connector will ship the same business day as purchased. Our type N female connector is part of RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3W20202

Pasternack Enterprises

PE3C2025

Pasternack Enterprises

PE3C2027LF

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to FAKRA Jack Cable Using LMR-100 Coax, LF Solder. PE3C2027LF is a FAKRA jack to FAKRA jack cable using LMR-100A coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2027LF FAKRA jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02029

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50. N Male to 1.0/2.3 Jack Bulkhead Cable Using RG188 Coax. PE3W02029 is a N type male to 1.0/2.3 jack bulkhead cable using RG188 coax. This Pasternack type N male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male N type to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02029 type N male to 1.0/2.3 jack bulkhead cable assembly is constructed with RG188 coax.

PE3W20218

Pasternack Enterprises

PE3W20263

Pasternack Enterprises

PE3W20269LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.92mm Male to SSMC Jack Right Angle Bulkhead Cable Using RG405 Coax, LF Solder. PE3W20269LF is a 2.92mm male to SSMC jack right angle bulkhead cable using RG405 coax. This Pasternack 2.92mm male to SSMC jack right angle bulkhead cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SSMC for connector 2. 2.92mm to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to jack SSMC right anglebulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20269LF 2.92mm male to SSMC jack right angle bulkhead cable assembly is constructed with RG405 coax.

PE3W20289/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable 72 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20289/HS-72 BMA jack 2 hole flange to MCX jack RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to MCX jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA 2 hole flange cable connection on one end and a MCX cable connection on the other. Our BMA to MCX cable assembly has a jack gender on end 1 and a jack on end 2. PE3W20289/HS-72 can also be known as a BMA female to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20289/HS-72 RF cable has an FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This PE3W20289/HS-72 BMA female to MCX female cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20289/HS-72 can also be used in the other direction and will be a MCX jack to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. This BMA female 2 hole flange to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to MCX cable assembly for quick shipment worldwide. Variations of BMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to MCX RF cable assembly as per your requirements.

1 : $171.94
10 : $165.06
25 : $158.18
100 : $151.31

PE38202/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75. 50 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG59 Coax with HeatShrink. PE38202/HS is a N type male to F type male cable using RG59 coax. This Pasternack type N male to type F male cable assembly uses a 50 Ohm type N for connector 1 and a 75 Ohm type F for connector 2. Our male type N to male type F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE38202/HS type N male to F type male cable assembly is constructed with RG59 coax.

PE34202-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using PE-SR401FL Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using PE-SR401FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 12 inch length using PE-SR401FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34202-12, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34202-12 is built with PE-SR401FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34202-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using PE-SR401FL coax.

1 : $173.99
25 : $165.29
50 : $156.59

PE38202

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm.

Teledyne HiRel

5962-9220202MFA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9220202M2A

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9220202MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

M38510/33202BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/76202BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

5962-8866202XA

Teledyne HiRel

STATIC RAM, 32K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8953202UA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-9172202QEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

M38510/35202BCA

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9220204MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-8953202YA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-9220204MFA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

M38510/32202B2A

Teledyne HiRel

BUFFER/DRIVER, HEX, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8953202QA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-8866202UA

Teledyne HiRel

STATIC RAM, 32K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

C1812X7R202-202KNE

VENKEL LTD

HV Chip Capacitor;1812;X7R;2000V;2000pF;�10%
RoHS : Compliant

SAFC1808X7R202-182KNE

VENKEL LTD

Safety Cap;1808;X7R;X2;1800pF;�10%
RoHS : Compliant

SAFC1812X7R202-152KNE

VENKEL LTD

Safety Cap;1812;X7R;X2;1500pF;�10%
RoHS : Compliant

C1206C0G202-100JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;10pF;�5%
RoHS : Compliant

C1206C0G202-470JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;47pF;�5%
RoHS : Compliant

C1206C0G202-470KNE

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;47pF;�10%
RoHS : Compliant

C1206C0G500-202GNE

VENKEL LTD

Chip Capacitor;1206;C0G;50V;2000pF;�2%
RoHS : Compliant

C1812C0G202-681JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;2000V;680pF;�5%
RoHS : Compliant

MELFC0102-RC-8202DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;82K;�0.5%
RoHS : Compliant

MELFC0204-TN-2202FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;22K;�1%
RoHS : Compliant

MELFC0204-TP-2202BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;22K;�0.1%
RoHS : Compliant

MELFC0204-ZN-2202DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;22K;�0.5%
RoHS : Compliant

MELFC0207-XC-6202DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;62K;�0.5%
RoHS : Compliant

MELFC0207-XK-2202FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�100PPM;22K;�1%
RoHS : Compliant

MELFM0204-TC-1202FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�50PPM;12K;�1%
RoHS : Not Compliant

Wuhan P&S

IHLP2020BZER100M11

Vishay Intertechnologies

IHLP Commercial Inductors, Low DCR Series
RoHS : Compliant

1 : $6.25
100 : $2.09
500 : $1.93
1,000 : $1.88

104,000

VCNT2025X01

Vishay Intertechnologies

Reflective Optical Sensor With Transistor Output
RoHS : Compliant

1 : $2.13
100 : $0.71
500 : $0.66
1,000 : $0.64

101,000

IHLP2020CZER4R7M11

Vishay Intertechnologies

IHLP-2020CZ-11 4.7 20% ER E3
RoHS : Compliant

1 : $4.16
100 : $1.39
500 : $1.29
1,000 : $1.25

50,000

IHLP2020CZER1R0M01

Vishay Intertechnologies

IHLP-2020CZ-01 1 20% ER E3
RoHS : Compliant

1 : $4.16
100 : $1.39
500 : $1.29
1,000 : $1.25

42,000

MBR20200CTG

onsemi

Dual Schottky Barrier Power Rectifier
RoHS : Compliant

1 : $3.57
100 : $2.28
500 : $1.88
1,000 : $1.73

22,750

IHLP2020CZER4R7M01

Vishay Intertechnologies

IHLP-2020CZ-01 4.7 20% ER E3
RoHS : Compliant

1 : $4.16
100 : $1.39
500 : $1.29
1,000 : $1.25

20,000

AR2020CSSM13SMTA0-DP

onsemi

20MP 1/1.8 CIS SO
RoHS : Compliant

1 : $107.82
100 : $68.82
500 : $56.75
1,000 : $52.17

18,620

VEMT2020X01

Vishay Intertechnologies

Silicon NPN Phototransistor
RoHS : Compliant

1 : $1.83
100 : $0.61
500 : $0.57
1,000 : $0.55

12,000

MMBFJ202

onsemi

N-Channel General Purpose Amplifier
RoHS : Compliant

1 : $0.1813
100 : $0.1157
500 : $0.0954
1,000 : $0.0878

6,000

VEMD2023X01

Vishay Intertechnologies

Silicon PIN Photodiode
RoHS : Compliant

1 : $1.99
100 : $0.67
500 : $0.62
1,000 : $0.6

6,000

VCNT2020

Vishay Intertechnologies

Reflective Optical Sensor With Transistor Output
RoHS : Compliant

1 : $1.36
100 : $0.46
500 : $0.42
1,000 : $0.41

3,000

STPS20200CFP

STMicroelectronics

-
RoHS : Compliant

1 : $4.66
100 : $1.56
500 : $1.44
1,000 : $1.4

2,000

VLMU35CT20-275-120

Vishay Intertechnologies

UVC Emitting Diode in SMD Package
RoHS : Compliant

1 : $8.42
100 : $3.03
500 : $2.19
1,000 : $2.02

1,000

G85D1162022HHR

TE Connectivity

Nano Sim card connector, 6p, surface mount

1 : $1.05
100 : $1.01
500 : $0.99
1,000 : $0.97

100

202-6-RV Distributor

Link URL