203-0-RV Price, Distributor, Stock

Reed Switch for Line Voltage switching RS-LV1925, Operate Band: 20-30AT, Switching Current (max): 0,5A, Corresponding Wattage: 60W/VA, Dimensions: FI2,55x19,50mm, Horizontal Mount

100 : $1.227
50 : $1.402
25 : $1.507
10 : $2.092
1 : $2.484

235

CLED10203

LEDCONN

Wire-to-board connector; Number of contacts: 3; SMD; 2A load capacity; 50V voltage

1,500 : $0.115
500 : $0.125
100 : $0.135
1 : $0.158

RC2012F203CS

Samsung Electro-Mechanics

Chip Resistor; SMD; 0805; 20K; 1%; 1/8W
RoHS : Compliant

20,000 : $0.007
5,000 : $0.008
1,000 : $0.025
1 : $0.039

WH06-2C 203 - 20K

Allconnect

Semi-fix SMD potentiometer; PRM6V203; 20k; 5x5mm

2,000 : $0.082
500 : $0.087
200 : $0.098
1 : $0.103

LV-1925-L-20-30-H, AT20-30

RRE

Reed Switch for Line Voltage switching RS-LV1925, Operate Band: 20-30AT, Switching Current (max): 0,5A, Corresponding Wattage: 30 W/VA, Dimensions: FI2,55x19,50mm, Horizontal Mount

100 : $1.227
50 : $1.402
25 : $1.507
10 : $2.092
1 : $2.484

Pasternack Enterprises US

PE3C2038/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male to N Male Low Loss Cable Using LMR-240 Coax With Times Microwaves Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable using LMR-240 coax with times microwaves components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable using LMR-240 coax with times microwaves components with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2038/HS can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C2038/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2038/HS can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable using LMR-240 coax with times microwaves components with heatshrink.

8,585

PE3C2039-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to TNC male low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2039-24 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C2039-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2039-24 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 24 inch length using LMR-195 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

2,885

PE3C2034/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male to BNC Male Cable 72 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male cable 72 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 72 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assembly has male gender on end 1 and male on end 2. PE3C2034/HS-72 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC plug cable assembly PE3C2034/HS-72 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C2034/HS-72 RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

815

PEWAT1020-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-12, Attenuation, Nominal: 30 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-387/U, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum Power: 0.1 W. WR-12 Waveguide Fixed Attenuator, 30 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Rated to 0.1 Watt. Pasternack’s PEWAT1020-30 is a waveguide fixed attenuator built to operate in full WR-12 band. This WR-12 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1020-30 WR-12 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 1.97 inches, a width of 0.75 inches and weighs 0.13 lbs. Our PEWAT1020-30 WR-12 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-387/U flange. The PEWAT1020-30 waveguide fixed attenuator is rated for maximum input power (CW) of 0.1 Watts along with 30 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-12 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 60 GHz waveguide fixed attenuator that meets your requirements.

1 : $1,110.0
5 : $1,065.6
10 : $1,021.2
25 : $976.8

PE7203-40

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 40 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, 7/16 DIN Male To 7/16 DIN Female Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7203-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a male gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7203-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7203-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,120.0
5 : $1,075.2
10 : $1,030.4

PE3W08203LF-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. MCX Plug to SMA Female Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMA cable connection on the other. Our MCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MCX to SMA cable is a plug to female coax assembly, PE3W08203LF-100CM, can also be known as a MCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MCX male to SMA jack cable assembly PE3W08203LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MCX plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08203LF-100CM can also be used in the other direction and will be SMA female to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMA female cable 100 cm length using LMR-100 coax, LF solder.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W12037

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. MHV Male to 7/16 DIN Male Cable Using LMR-195 Coax. PE3W12037 is a MHV male to 7/16 DIN male cable using LMR-195 coax. This Pasternack MHV male to 7/16 DIN male cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male MHV to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12037 MHV male to 7/16 DIN male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20344

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. HN Male to UHF Female Cable Using RG213 Coax. PE3W20344 is a HN male to UHF female cable using RG213 coax. This Pasternack HN male to UHF female cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm UHF for connector 2. Our male HN to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20344 HN male to UHF female cable assembly is constructed with RG213 coax.

PE3W20371/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male to C Male Cable Using RG58 Coax with HeatShrink. PE3W20371/HS is a reverse polarity BNC male to C male cable using RG58 coax. This Pasternack reverse polarity BNC male to C male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm C for connector 2. Our reverse polarity male BNC to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20371/HS BNC reverse polarity male to C male cable assembly is constructed with RG58 coax.

PE34203-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Right Angle Cable 60 Inch Length Using RG225 Coax., Radio frequency assembly N male to N male right angle cable 60 inch length using RG225 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 60 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34203-60, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE34203-60 is built with RG225 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 400 MHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34203-60 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 60 inch length using RG225 coax.

1 : $312.99
25 : $297.34
50 : $281.69

PE34203LF-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Right Angle Cable 60 Inch Length Using RG225 Coax, LF Solder., Radio frequency assembly N male to N male right angle cable 60 inch length using RG225 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 60 inch length using RG225 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE34203LF-60, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE34203LF-60 is built with RG225 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 400 MHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34203LF-60 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 60 inch length using RG225 coax, LF solder.

1 : $325.99
25 : $309.69
50 : $293.39

PE3W07820-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm TNC Male to 75 Ohm TNC Male Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm TNC male to 75 Ohm TNC male cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm TNC male to 75 Ohm TNC male cable 36 inch length using 75 Ohm RG179 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W07820-36 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W07820-36 is built with RG179 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to 75 Ohm TNC male cable 36 inch length using 75 Ohm RG179 coax.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W20313

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable Using RG400 Coax. PE3W20313 is a reverse polarity SMA male to reverse polarity SMA male cable using RG400 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20313 SMA reverse polarity male to SMA reverse polarity male cable assembly is constructed with RG400 coax.

PE3W20395

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male to C Female Cable Using RG58 Coax. PE3W20395 is a reverse polarity BNC male to C female cable using RG58 coax. This Pasternack reverse polarity BNC male to C female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm C for connector 2. Our reverse polarity male BNC to female C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20395 BNC reverse polarity male to C female cable assembly is constructed with RG58 coax.

PE3C1203-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. SMA Male Right Angle to SMA Male Right Angle Cable 150 cm Length Using PE-P141 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 150 cm length using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 150 cm length using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1203-150CM, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1203-150CM is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 150 cm length using PE-P141 coax.

1 : $299.99
25 : $284.99
50 : $269.99
100 : $257.99

Teledyne HiRel

5962-8855203YA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/33203B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8866203YA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8866203NA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/33203BXA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8855203UA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/76203BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

5962-8866203TA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8866203XA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8855203NA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8757203BA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-8866203UA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/75203BDA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/75203BCA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/75203B2A

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

Venkel Ltd.

MELFC0204-TC-6203DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;620K;�0.5%
RoHS : Compliant

MELFC0204-TZ-1203FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;120K;�1%
RoHS : Compliant

MELFC0204-ZC-6203BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;620K;�0.1%
RoHS : Compliant

MELFC0204-ZE-1203CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;120K;�0.25%
RoHS : Compliant

MELFC0204-ZE-8203FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;820K;�1%
RoHS : Compliant

MELFC0204-ZZ-1203DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;120K;�0.5%
RoHS : Compliant

MELFC0207-VP-2203BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�5PPM;220K;�0.1%
RoHS : Compliant

MELFC0207-XP-1203CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;120K;�0.25%
RoHS : Compliant

UPTF0402-16W-N-2030DT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;203R;�0.5%
RoHS : Compliant

UPTF0603-16W-E-3203AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;320K ;�0.05%
RoHS : Compliant

UPTF0603-16W-N-2031AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.05%
RoHS : Compliant

UPTF0603-16W-N-2032AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;20.3K;�0.05%
RoHS : Compliant

UPTF0603-16W-P-2030AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;203R;�0.05%
RoHS : Compliant

UPTF0805-10W-E-2030AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�25PPM;203R;�0.05%
RoHS : Compliant

UPTF0805-10W-N-1203AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;120K ;�0.05%
RoHS : Compliant

Vyrian

242A312-12-03-0

TE Connectivity

HEAT SHRINK BOOT, FLUORO-ELASTOMER, 25.4 ID Before Shrink
RoHS : Compliant

12,484

2203876-1

TE Connectivity

Connector Accessory
RoHS : Compliant

11,417

1393203-8

TE Connectivity

Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.038A (Coil), 12VDC (Coil), 450mW (Coil), 7A (Contact), DC Input, AC Output, Panel Mount
RoHS : Compliant

10,730

1982033

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,392

V62/03625-04XE

Texas Instruments

Switching Controller, Current-mode, 1A, 500kHz Switching Freq-Max, BIPolar, PDSO8

9,298

2203160

Phoenix Contact

Enclosures/Accessories
RoHS : Compliant

8,604

V62/03602-01XE

Texas Instruments

Bus Driver, ACT Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48
RoHS : Compliant

7,825

V62/03619-04YA

Texas Instruments

Operational Amplifier, 2 Func, 1700uV Offset-Max, BICMOS, PDSO14
RoHS : Not Compliant

5,928

V62/03630-09XX

Texas Instruments

5,634

V62/03632-03XE

Texas Instruments

Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO20
RoHS : Compliant

4,915

V62/03632-03XX

Texas Instruments

4,566

V62/03635-01XE

Texas Instruments

Adjustable Positive LDO Regulator, 1.5V Min, 5.5V Max, PMOS, PDSO20
RoHS : Compliant

3,003

19203-0086

Molex

Ring Terminal, 2mm2
RoHS : Compliant

668

1300120339

Molex

Cable Assembly
RoHS : Compliant

575

135101-R2-03.00

Amphenol Corporation

Cable Assembly, 1 Conductor(s), 500V, Communication Cable
RoHS : Compliant

449

Waytek, Inc.

12020321

Aptiv PLC

Pack-Con III Series Female 16-14GA 12020321 Terminal Reel 2500/Reel

2,500 : $0.0981
12,500 : $0.0921

70,000

12033731

Aptiv PLC

Cap For Weather Resistant BLADE TYPE FUSE HOLDER
RoHS : Compliant

20 : $0.5701
50 : $0.5101
100 : $0.4626
200 : $0.4461
500 : $0.4317
1,000 : $0.361

59,841

5084-2030

Molex

2.13 MM MLX Pin & Socket Receptacle 3 Contacts REPLACED 38153 TYCO 1-480701-0

50 : $0.1414
200 : $0.1339
500 : $0.1242
1,000 : $0.1198

50,125

12020334

Aptiv PLC

Pack-Con Series III Female 20-18GA 12020334 Terminal Reel 2500/Reel
RoHS : Compliant

2,500 : $0.1267
12,500 : $0.1183

17,500

12034145

Aptiv PLC

TPA Clip 3 Contacts Female Black # 12034145
RoHS : Compliant

50 : $0.2111
200 : $0.2006
500 : $0.1872
1,000 : $0.1795

12,624

12020334-L

Aptiv PLC

Pack-Con Series III Female 20-18 GA 12020334 L TERMINAL LOOSE PIECE

50 : $0.2464
200 : $0.2347
500 : $0.2183
1,000 : $0.2102

8,500

12034269

Aptiv PLC

2-Way Metri-Pack 630 Connector Male DELPHI # 12034269
RoHS : Compliant

10 : $1.0593
50 : $0.9576
100 : $0.8442
200 : $0.8442
500 : $0.8243
1,000 : $0.6924

7,972

12034363

Aptiv PLC

2-Way Metri-Pack 630 TPA DELPHI # 12034363

50 : $0.1603
200 : $0.1371
500 : $0.1273
1,000 : $0.1206
5,000 : $0.1095

5,856

15203

Heyco

Heyco 15203 edge clip with 8" UV cable tie combines an edge-grip mount with an integrated UV-resistant tie for drill-free bundle attachment. Its one-piece design supports fast installation, stable retention, and organized harness routing along panel edges in exposed environments.

100 : $0.6345
5,000 : $0.6107

2,500

20385V

Hillsdale Terminal & Tool Inc

12-10GA .195 Female Bullet Yellow Vinyl Insulated

50 : $0.2222
200 : $0.2016
500 : $0.1802
1,000 : $0.1634
5,000 : $0.1557

1,982

167-00203

Aptiv PLC

Aptiv 8905793 outlet fitting for corrugated loom is a conduit transition component designed to route protected wiring out of split loom. Its formed outlet design helps guide and secure harness exits while maintaining organized cable protection in vehicle and equipment applications.

20 : $0.4207
50 : $0.375
100 : $0.3404
200 : $0.3293
500 : $0.3182
1,000 : $0.3056

1,781

643203311

Molex

CMC Rcpt 48Ckt R Blk Mat Seal

1 : $9.1
200 : $8.65
500 : $8.05
1,000 : $7.76

771

20384V

Hillsdale Terminal & Tool Inc

12-10GA .195 Male Bullet Yellow Vinyl Insulated

50 : $0.1525
200 : $0.1384
500 : $0.1237
1,000 : $0.1122
5,000 : $0.107

427