| Electronic Components Datasheet Search |
|
2076TAAD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Master Electronics | 42076 | TE Connectivity | SPLC AMVAR 600-3000 020BR RoHS : Compliant |
| 25,000 | |
| 320761 | TE Connectivity | Ring Terminal Connector - 5/8 Stud - 0.039 (0.99mm) Thickness - 1.250 (31.75mm) Width - 10 to 12 AWG - Non-Insulated - Crimp Termination. RoHS : Compliant |
| 1,445 | ||
| FW-02-03-FM-D-112-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-262-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-102-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-292-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-242-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-092-076 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1SNS420001Z2076 | TE Connectivity | ADD0001533137-A (TB.EBR) ENT12986-A RoHS : Compliant |
| 0 | ||
| 2076251-1 | TE Connectivity | WIRE CRIMPER SPECIAL RoHS : Compliant |
| 0 | ||
| 2076864-1 | TE Connectivity | WIRE CRIMPER FOR MID SIZE RoHS : Compliant |
| 0 | ||
| ZPF000000000020769 | TE Connectivity | SME 410 B 2 S 6 MOQ Reduction RoHS : Compliant |
| 0 | ||
| SGE151020760A05000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 93-22076 | TE Connectivity | Conn G FSA 38999 S3 Shell 25 RoHS : Compliant |
| 0 | ||
| AW-15-03-G-D-122-076 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 142-0761-881 | Bel Fuse | - Bag (Alt: 142-0761-881) RoHS : Compliant |
| 1,025 | |
| 207684-5 | TE Connectivity | - Bag (Alt: 207684-5) RoHS : Compliant |
| 1,000 | ||
| 142-0761-821 | Bel Fuse | - Bag (Alt: 142-0761-821) RoHS : Compliant |
| 525 | ||
| 142-0761-801 | Bel Fuse | Conn SMA RCP 0Hz to 26.5GHz 50Ohm Solder RA Thru-Hole - Bag (Alt: 142-0761-801) RoHS : Compliant |
| 302 | ||
| M39014/22-0764 | Kyocera AVX Components | - Rail/Tube (Alt: M39014/22-0764) RoHS : Not Compliant | 174 | |||
| M39014/05-2076 | KEMET Corporation | - Bulk (Alt: M39014/05-2076) RoHS : Not Compliant |
| 54 | ||
| 207604-1 | TE Connectivity | Connector Accessories Strain Relief Kit 36 POS Thermoplastic Red 600VAC - Bag (Alt: 207604-1) RoHS : Compliant |
| 47 | ||
| 142-0761-841 | Bel Fuse | Conn SMA RCP 0Hz to 26.5GHz 50Ohm Solder ST Edge Mount Gold - Bag (Alt: 142-0761-841) RoHS : Compliant |
| 5 | ||
| M39014/22-0767 | Kyocera AVX Components | - Rail/Tube (Alt: M39014/22-0767) RoHS : Not Compliant |
| 4 | ||
| SUPERTHERMAL-A072-30-02-0762-0762G | Boyd Corporation | SUPERTHERMAL-A072-30-02-0762-0762 - Bulk (Alt: 058676) RoHS : Compliant | 0 | |||
| SUPERTHERMAL-B132-10-02-0762-0762G | Boyd Corporation | SUPERTHERMAL-B132-10-02-0762-0762 - Bulk (Alt: 058677) RoHS : Compliant | 0 | |||
| SUPERTHERMAL-B132-30-02-0762-0762 | Boyd Corporation | SUPERTHERMAL-B132-30-02-0762-0762 - Bulk (Alt: 058679) RoHS : Compliant | 0 | |||
| SUPERTHERMAL-A072-10-02-0762-0762G | Boyd Corporation | SUPERTHERMAL-A072-10-02-0762-0762 - Bulk (Alt: 058674) RoHS : Compliant |
| 0 | ||
| 207602-5022 | Molex | - Bulk (Alt: 2076025022) RoHS : Not Compliant |
| 0 | ||
| 207602-5059 | Molex | Grounding Jumper, Tin, Copper, 207602 Series, Right-Angle-to-Flat, 48x14/30 Braid Type, 457mm L - Bulk (Alt: 2076025059) RoHS : Compliant |
| 0 | ||
![]() Newark | 46207-6010 | Molex | Conn, Hdr, 10Pos, 2Row, 4.2Mm, Th; |Molex 46207-6010 RoHS : Compliant |
| 2,764 | |
| MIC2076-1YM | Microchip Technology Inc | Switch, Mosfet, Dual, Active High, 8Soic; |Microchip Technology MIC2076-1YM RoHS : Compliant |
| 257 | ||
| 207602-5027 | Molex | Ground Jumper 48X14/30 150 A Max 12 In; |Molex 207602-5027 RoHS : Not Compliant |
| 250 | ||
| 2076025010 | Molex | Ground Cord, Stud-Stud, 12"; |Molex 2076025010 RoHS : Compliant |
| 241 | ||
| 2076025004 | Molex | Earth Strap, Stud To Stud, 24", 607Mm; |Molex 2076025004 RoHS : Compliant |
| 231 | ||
| 207602-5010 | Molex | Flexible Braid Bond, Lug-Lug, 305Mm; |Molex 207602-5010 RoHS : Compliant |
| 187 | ||
| 207613-7 | TE Connectivity | Conn Hdr, Amp - Te Connectivity 207613-7; |Te Connectivity Amp 207613-7 RoHS : Not Compliant |
| 151 | ||
| 5207661-3 | TE Connectivity | D Sub Housing, Rcpt, 37Pos, Dc; No. Of Positions:37Positions; Connector Type:D Sub; Connector Shell Size:Dc; Product Range:Amplimite Hdp-20 Series; Gender:Receptacle; Connector Body Material:Metal Body Rohs Compliant: Yes |Te Connectivity Amp 5207661-3 RoHS : Compliant |
| 147 | ||
| 207602-5008 | Molex | Flex Braided Ground Cord, Lug-Lug, 607Mm; |Molex 207602-5008 RoHS : Compliant |
| 121 | ||
| MP002076 | SPC Multicomp | 52Mm Red Led Traffic Light Pixel Cluster; |Multicomp Pro MP002076 RoHS : Compliant |
| 118 | ||
| TW-30-01-G-D-142-076 | Samtec Inc | Conn Stack Brd, 2Mm, 60Pos, Hdr; |Samtec, Inc. TW-30-01-G-D-142-076 RoHS : Compliant |
| 67 | ||
| 2076025003 | Molex | Earth Strap, Stud To Stud, 18", 457Mm; |Molex 2076025003 RoHS : Compliant |
| 36 | ||
| 207602-1 | TE Connectivity | Strain Relief Kit, 12Way, Thermoplastic; |Te Connectivity Amp 207602-1 RoHS : Compliant |
| 34 | ||
| 207601-1 | TE Connectivity | Strain Relief Kit, 9Way, Thermoplastic; Accessory Type:Strain Relief; For Use With:9 Position Plugs And Receptacles; No. Of Positions:9Positions; Strain Relief Material:Thermoplastic; Product Range:Metrimate Square Grid Rohs Compliant: Yes RoHS : Compliant |
| 11 | ||
| 2076 | Adafruit Industries | 2X23 Male Headers For Beaglebone Black - Two Pack! |Adafruit 2076 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX20766EPE+ | Analog Devices Inc | SMART SLAVE IC WITH INTEGRATED RoHS : Compliant |
| 895 | |
| MAX20766EPE+T | Analog Devices Inc | SMART SLAVE IC (COMMS SPECIFIC RoHS : Compliant |
| 470 | ||
| DC2076A-A | Analog Devices Inc | LTC6430-20 Demo Board - Optimi RoHS : Compliant |
| 13 | ||
| DC2076A-B | Analog Devices Inc | LTC6430-20 Demo Board - Optimi RoHS : Compliant |
| 12 | ||
![]() RS | 2076 | Heyco | UNIVERSAL BUSHINGS, NYLON 6/6, WHITE, MOUNTING HOLE SIZE 0.625 IN, UB SERIES |
| 8,320 | |
| 207602-5001 (TRITON 207602-5001) | Molex | BUS BARS, GROUND JUMPER, 24X5/30 53 A MAX 6IN, 207602 SERIES |
| 242 | ||
| 207602-5007 (TRITON 207602-5007) | Molex | BUS BARS, GROUND JUMPER, 48X24/36 105 A MAX 18 IN, 207602 SERIES |
| 212 | ||
| 207602-5012 (TRITON 207602-5012) | Molex | BUS BARS, GROUND JUMPER, 48X24/30 150 AMAX 24 IN, 207602 SERIES |
| 210 | ||
| 207680 | RS Pro | GREEN LED INDICATOR LAMPS BA9S SINGLE CHIP 130 V AC 100000 H |
| 172 | ||
| 207602-5003 (TRITON 207602-5003) | Molex | BUS BARS, GROUND JUMPER, 24X5/30 53 A MAX 18 IN, 207602 SERIES |
| 79 | ||
| 207602-5004 (TRITON 207602-5004) | Molex | BUS BARS, GROUND JUMPER, 24X5/30 A MAX 24 IN, 207602 SERIES |
| 55 | ||
| 207696 | RS Pro | YELLOW LED INDICATOR LAMPS BA9S SINGLE CHIP 130 V AC 100000 H |
| 39 | ||
| 207602-5010 (TRITON 207602-5010) | Molex | BUS BARS, GROUND JUMPER, 48X24/30 150 A MAX 12 IN, 207602 SERIES |
| 30 | ||
| 207602-5011 (TRITON 207602-5011) | Molex | BUS BARS, GROUND JUMPER, 48X24/30 150 A MAX 18 IN, 207602 SERIES |
| 8 | ||
| 2076 | 80/20 Inc | 10 S LEFT HAND LIFT-OFF HINGE SECTION W/ SHORT PIN |
| 7 | ||
| 207602-5002 (TRITON 207602-5002) | Molex | BUS BARS, GROUND JUMPER, 24X5/30 53 A MAX 12 IN, 207602 SERIES |
| 5 | ||
| 2076 | Adafruit Industries | 2X23 MALE HEADERS FOR BEAGLEBONE BLACK - TWO PACK! |
| 0 | ||
| 2076 | Keystone Electronics Corp | TURNABLE JACK SCREW |
| 0 | ||
| 2076 | Lincoln Industrial Corporation | PUMP ASY-POWER MASTER III |
| 0 | ||
![]() Microchip Technology Inc | MIC2076A-2YM | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2035-11-24 RoHS : Compliant |
| 6,840 | |
| MIC2076A-1YM | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-08-18 RoHS : Compliant |
| 6,190 | ||
| MIC2076-1YM-TR | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-05-20 RoHS : Compliant |
| 750 | ||
| MIC2076-1YM | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-03-16 RoHS : Compliant |
| 284 | ||
| MIC2076-2YM | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-01-17 RoHS : Compliant |
| 80 | ||
| MIC2076-2YM-TR | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-01-26 RoHS : Compliant |
| 0 | ||
| MIC2076A-1YM-TR | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2041-10-19 RoHS : Compliant |
| 0 | ||
| MIC2076A-2YM-TR | Microchip Technology Inc | Dual USB High-Side Power Switch, SOIC, Projected EOL: 2036-09-17 RoHS : Compliant |
| 0 | ||
| DSC1004DI2-076.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 76MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-10-26 RoHS : Compliant |
| 0 | ||
| DSC1004DI2-076.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 76MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-10-26 RoHS : Compliant |
| 0 | ||
| OX-2051-DEE-2076-100M000000 | Microchip Technology Inc | OX-2051-DEE-2076-100M000000, Projected EOL: 2051-04-04 - Contact for Pricing | 0 | |||
![]() Bisco Industries | MS122076 | MS Inserts | 30,761 | |||
| 0906-0-15-20-76-14-11-0 | Mill-Max Mfg Corp | RoHS : Compliant | 6,584 | |||
| 1120761 | Unbrako Group | 3,450 | ||||
| 0983-0-15-20-76-14-26-0 | Mill-Max Mfg Corp | 3,090 | ||||
| MS122076L | MS Inserts | 1,000 | ||||
| A2076-16-2-97 | Amphenol Positronic | 753 | ||||
| 2076-440-AL-21 | RAF Electronic Hardware | 220 | ||||
| BU-1420761871 | Mueller Electric Company | 100 | ||||
| 20764 | WASHERS | 100 | ||||
| BU-1420761861 | Mueller Electric Company | 100 | ||||
| MS20760-W20-24 | B&E Manufacturing | 48 | ||||
| MS20760-W12-16 | B&E Manufacturing | 44 | ||||
| MS20760-R16 | MS FITTINGS/ELBOWS | 8 | ||||
| NAS6207-6D | Mac Fastteners Inc | 4 | ||||
| MS20760-D12-16 | Pamco Precision Aircraft Machining Company | 2 | ||||
![]() Rochester Electronics | ULS2076H-883 | Allegro MicroSystems LLC | Darlington Transistor 4 NPN Darlington 50V 1.5A 16-DIP RoHS : Not Compliant |
| 747 | |
| CY8C20766A-24FDXCT | Cypress Semiconductor | Specific Microcontroller M8C Capacitive Sensing 2k x 8 I²C, SPI 30-BGA T/R RoHS : Compliant |
| 2,970 | ||
| CY8C20767-24FDXCT | Cypress Semiconductor | Microprocessor Circuit PBGA30 RoHS : Compliant |
| 4,165 | ||
| MIC2076-2BN | Micrel Inc | Power Distribution Switch General Purpose N-Channel 2 OUT High Side 8-DIP Tube RoHS : Not Compliant |
| 15,135 | ||
| 1S2076AS7A | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Not Compliant |
| 306 | ||
| 1S2076JRE | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Not Compliant |
| 8,000 | ||
| 1S2076JTA | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Not Compliant |
| 10,000 | ||
| 1S2076JTD | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Not Compliant |
| 16,244 | ||
| 1S2076S7A | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Not Compliant |
| 26,000 | ||
1S2076TA-E![]() | Renesas Electronics Corporation | Mixer Diode, Silicon, DO-35 RoHS : Compliant |
| 433,515 | ||
| 1S2076TA-E-Q | Renesas Electronics Corporation | Epitaxial Planar Diode for High Speed Switching RoHS : Compliant |
| 175,000 | ||
1S2076TD-E![]() | Renesas Electronics Corporation | Mixer Diode, Silicon, DO-35 RoHS : Compliant |
| 930,487 | ||
![]() Sager | 2076 | Keystone Electronics Corp | Screws & Fasteners TURNABLE JACK SCREW | 0 | ||
| 2000-8-15-20-76-14-11-0 | Mill-Max Mfg Corp | STANDARD SPRING LOADED PIN RoHS : Compliant |
| 0 | ||
| 2076025016 | Molex | Cable Mounting & Accessories 10GA, 6 GROUND STRAP, FOC |
| 0 | ||
| 2076025061 | Molex | Cable Mounting & Accessories | 0 | |||
| 2076864-1 | TE Connectivity | Bench Top Tools WIRE CRIMPER FOR MID SIZE | 0 | |||
| 320761 | TE Connectivity | Terminals RING 12-10AWG #5/8 RoHS : Compliant |
| 0 | ||
| 42076 | TE Connectivity | Terminals SPLICE END FEED THRU RoHS : Compliant |
| 0 | ||
| V23552B2076B201 | TE Connectivity | TE Connectivity | 0 | |||
| AW-15-03-G-D-122-076 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 207601-1 | TE Connectivity | Headers & Wire Housings STR REL KIT9P RoHS : Compliant |
| 0 | ||
| 2076025066 | Molex | Cable Mounting & Accessories |
| 0 | ||
| 2076794-4 | TE Connectivity | TE Connectivity SPECIAL ANVIL |
| 0 | ||
| 9763402076 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9865502076 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 70230-2076 | OMRON Electronic Components | Safety Light Curtains TYPE MSF4800S-30-0600 SAFETY LIGHT CURTAIN | 0 | |||
![]() TME | 42076 | TE Connectivity | Tip: butt splice; non-insulated; brass; crimped RoHS : Compliant |
| 60,000 | |
| MRA0207 6K65 B 15PPM TA | The Heico Companies LLC | Resistor: metal film; 6.65kΩ; 250mW; ±0.1%; -55÷155°C |
| 500 | ||
| 2-2342076-5 | TE Connectivity | Connector: pluggable terminal block; power supply; 11A; 300V RoHS : Compliant |
| 197 | ||
| BZV15/A0420/76 | Bulgin | Connector: AC supply; male; power supply; 4A; 250V RoHS : Compliant |
| 100 | ||
| 1SNS420001Z2076 | TE Connectivity | 1SNS420001Z2076 |
| 36 | ||
| 2076864-1 | TE Connectivity | Crimping tool: dedicated |
| 4 | ||
| 2076794-4 | TE Connectivity | Anvil |
| 1 | ||
| BMBR2076 | BM Group spa | Cable tie; L: 200mm; W: 7.6mm; polyamide; natural; 230N; Ømax: 55mm |
| 0 | ||
| 10042076 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 28; THT; 1.5A; 60V |
| 0 | ||
| 10042076 | Essentra Components | Washer; round; h=3mm; D=36mm; polyamide; natural |
| 0 | ||
| DE1207-680 | FerroCore | Inductor: wire; SMD; 680uH; 850mA; R: 1.13Ω; ±20%; 12x12x8mm |
| 0 | ||
| NVWV-M207-6 | Thomas & Betts | 90° angled connector; brass,polyamide; VWV; IP68; black; UL94V-0 |
| 0 | ||
| PTVS2-076C-H | Bourns Inc | Diode: TVS; 85÷95V; 2kA; bidirectional; DFN2; reel,tape RoHS : Compliant |
| 0 | ||
| 087-2-076-0-S-XS0-1020 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 76; THT; straight RoHS : Compliant |
| 0 | ||
| 087-2-076-0-S-XS0-1390 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 76; THT; straight RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 1207640 | Phoenix Contact | AVAILABLE EU RoHS : Compliant | 189 | ||
![]() ComSIT USA | 2076096 | TE Connectivity | Combination Line Connector, 3 Contact(s), Female, Solder Terminal RoHS : Compliant | 700 | ||
| MIC20762YM | Micrel Inc | Dual-Channel Power Distribution Switch Power Supply Support Circuit, Fixed, 2 Channel, +2.4V, PDSO8 RoHS : Compliant | 579 | |||
| MIC20762YMTR | Micrel Inc | Dual-Channel Power Distribution Switch Power Supply Support Circuit, Fixed, 2 Channel, +2.4V, PDSO8 RoHS : Compliant | 435 | |||
| 2076151 | TE Connectivity | SOCKET HEADER ASSEMBLY, 16 POSITION, IN-LINE, METRIMATE Combination Line Connector, 16 Contact(s), Female, Solder Terminal, Socket RoHS : Not Compliant | 120 | |||
| 2076156 | TE Connectivity | Combination Line Connector, 16 Contact(s), Female, Solder Terminal, Plug RoHS : Compliant | 40 | |||
| 207603051003000 | odu | Electronic Component RoHS : Not Compliant | 29 | |||
![]() Interstate Connecting Components | 207602-1 | TE Connectivity | METRIMATE,STR REL KIT,12P RoHS : Compliant |
| 89 | |
| RC442-076-301-3900 | AirBorn a molex company | Low Profile Receptacle RoHS : Compliant |
| 1 | ||
| 2076240-3 | TE Connectivity | COVER, TERMINAL SUPPORT | 0 | |||
| 320761 | TE Connectivity | BUDGET RING 12-10 5/8 RoHS : Compliant |
| 0 | ||
| 42076 | TE Connectivity | SPLC AMVAR 600-3000 020BR RoHS : Compliant |
| 0 | ||
| 207601-1 | TE Connectivity | METRIMATE,STR REL KIT,9P RoHS : Compliant |
| 0 | ||
| 2076794-4 | TE Connectivity | SPECIAL ANVIL |
| 0 | ||
| 2076864-6 | TE Connectivity | WIRE CRIMPER FOR MID SIZE | 0 | |||
| 7-1437207-6 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 713HS355NF2120-767 | Glenair Inc | HAT TRICK SYSTEM BS W/ BAND TERMINI FOR TUBING | 0 | |||
| 71-632076-08L | Amphenol Industrial Operations | PLUG | 0 | |||
| 7-2076295-5 | TE Connectivity | WIRE CRIMPER, SPECIAL RoHS : Compliant | 0 | |||
| 2-2342076-5 | TE Connectivity | 25POS HDR 90 DEG,HT,3.5MM PITC RoHS : Compliant |
| 0 | ||
| 2076084-3 | TE Connectivity | SLUG BLADE FOR E.F. MID S |
| 0 | ||
| 207684-1 | TE Connectivity | AMPLIMITESKT CONTSZ 22 RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 142-0761-821 | Johnson Components |
| 738 | ||
| 142-0761-851 | Johnson Components |
| 49 | |||
| 23A02076-23 | SOURIAU-SUNBANK |
| 0 | |||
| 142-0761-891 | Johnson Components |
| 0 | |||
| MB2-076P(702) | Amphenol Corporation |
| 0 | |||
| A2076-16-3-97 | Amphenol Positronic |
| 0 | |||
| DD78S32S60T20-764.58 | Amphenol Positronic |
| 0 | |||
| S2090-2207-65 | SOURIAU-SUNBANK |
| 0 | |||
| BV1SRP2076DCW | Amphenol PCD |
| 0 | |||
| A2076-16-3-16 | Amphenol Positronic |
| 0 | |||
| A2076-16-2-97 | Amphenol Positronic |
| 0 | |||
| 23A02076-65 | SOURIAU-SUNBANK |
| 0 | |||
| 142-0761-841 | Johnson Components |
| 0 | |||
| 23A02076-04 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02076-87 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 207684-3 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 2,013 | |
| 207684-1 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 908 | ||
| 207613-1 | TE Connectivity | Connectors RoHS : Not Compliant |
| 496 | ||
| 132076-1 | TE Connectivity | Terminals RoHS : Compliant |
| 424 | ||
| 1-2342076-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 349 | ||
| 5207661-3 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 132 | ||
| 2-2342076-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 130 | ||
| RC4B2-076-281-58NB | AirBorn a molex company | RC4B2-076-281-58NB |
| 97 | ||
| RC4C2-076-111-5700 | AirBorn a molex company | Top-oN-Stack Cable Mating Connector (MAL |
| 92 | ||
| TW-30-01-G-D-142-076 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 44 | ||
| 2076864-1 | TE Connectivity | Tools |
| 3 | ||
| 2076794-4 | TE Connectivity | Connectors |
| 1 | ||
| 2076859-3 | TE Connectivity | Connectors |
| 1 | ||
| 1-2076865-3 | TE Connectivity | Connectors |
| 1 | ||
| 2076862-7 | TE Connectivity | Connectors |
| 1 | ||
![]() Richardson RFPD | SUPERTHERMAL-B132-30-02-0762-0762 | BOYD Laconia | Super Thermal Gap Filler RoHS : Compliant | 0 | ||
| SUPERTHERMAL-A072-10-02-0762-0762 | BOYD Laconia | THERMAL MGMT ACCSY RoHS : Compliant | 0 | |||
| 07207630 | SEMIKRON | Thyristor SCR 1.2KV 9KA 2-Pin RoHS : Compliant | 0 | |||
| R142076161W | Radiall | Conn BNC 0Hz to 1.5GHz 75Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| DC2076A-B | Analog Devices Inc | LTC6430-20 CATV Amplifier Demonstration Circuit RoHS : Compliant |
| 0 | ||
| R142076000W | Radiall | Conn BNC 0Hz to 1.5GHz 75Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| MRA020769K8B15PPMTA | Ohmite Mfg Co | METAL FILM RESISTOR RoHS : Compliant | 0 | |||
| MRA02076K98B15PPMTA | Ohmite Mfg Co | METAL FILM RESISTOR RoHS : Compliant | 0 | |||
| DMF2076-000 | Skyworks Solutions Inc | Diode RF Mixer Schottky 2V 75mW 4-Pin RoHS : Compliant |
| 0 | ||
| MRA020768K1B15PPMTA | Ohmite Mfg Co | METAL FILM RESISTOR RoHS : Compliant | 0 | |||
| 142-0761-891 | Cinch Connectivity Solutions | Conn SMA 0Hz to 26.5GHz 50Ohm Solder ST Edge Mount RoHS : Compliant |
| 0 | ||
| MRA02076K81B15PPMTA | Ohmite Mfg Co | Res Metal Film 6.81K Ohm 0.1% 0.25W(1/4W) ±15ppm/C RoHS : Compliant | 0 | |||
| MRA020763K4B15PPMTA | Ohmite Mfg Co | Res Metal Film 63.4K Ohm 0.1% 0.25W(1/4W) ±15ppm/C RoHS : Compliant | 0 | |||
| MRA020760K4B15PPMTA | Ohmite Mfg Co | Res Metal Film 60.4K Ohm 0.1% 0.25W(1/4W) ±15ppm/C RoHS : Compliant | 0 | |||
| SI5332AD12076-GM2R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 4 RoHS : Compliant | 0 | |||
![]() Rutronik | 32207690 | YAGEO Nexenos | PT100 Platinium M213 B RoHS : Compliant |
| 1,000 | |
| 32207691 | YAGEO Nexenos | PT100 A-CLASS M213 B=3850K RoHS : Compliant |
| 1,000 | ||
![]() Chip 1 Exchange | HCA0207-680R-2%R5-E3 | Vishay Intertechnologies | INSTOCK | 75,000 | ||
| 32207638 | YAGEO Corporation | INSTOCK | 3,980 | |||
| 901220768- | Molex | INSTOCK | 564 | |||
| 6903 6728 20 76 | Wurth Elektronik | INSTOCK | 303 | |||
| 8-752-076-23 | Sony Batteries | INSTOCK | 207 | |||
| BA2076B | Toshiba America Electronic Components | INSTOCK | 179 | |||
| BA2076B | Asahi Kasei Microsystems Corporation | INSTOCK | 51 | |||
| 1207650- | Phoenix Contact | INSTOCK | 17 | |||
| 32207614- | YAGEO Corporation | INSTOCK | 9 | |||
| 2N2076A | INSTOCK | 5 | ||||
![]() Avnet Abacus | 901220768 | Molex | (Alt: 901220768) RoHS : Compliant | 1,800 | ||
| 32207695 | YAGEO Corporation | M 213 Pt 1000 B (Alt: 32207695) RoHS : Compliant | 1,000 | |||
| 32207690 | YAGEO Corporation | M 213 Pt 100 B (Alt: 32207690) RoHS : Compliant | 1,000 | |||
| 32207691 | YAGEO Corporation | M 213 Pt 100 A (Alt: 32207691) RoHS : Compliant | 1,000 | |||
| RC422-076-101-3000 | Molex | AirBorn RC Series Rectangular BottomofStack Board Mount Connector Stackable 0075191mm Pitch (Alt: RC422-076-101-3000) RoHS : Compliant | 5 | |||
| 42076 | TE Connectivity | Splice Terminal 15522AWG 686mm 369mm Strip (Alt: 42076) RoHS : Compliant | 0 | |||
| 42076 | TE Connectivity | Splice Terminal 15522AWG 686mm 369mm Strip (Alt: 42076) RoHS : Compliant | 0 | |||
| 320761 | TE Connectivity | Ring Tongue Terminal 1012AWG 4816mm 3175mm Tin Loose Piece (Alt: 320761) RoHS : Compliant | 0 | |||
| 207601-1 | TE Connectivity | Connector Accessories 9 POS Strain Relief Kit Thermoplastic Red Individual (Alt: 207601-1) RoHS : Compliant | 0 | |||
| 207601-1 | TE Connectivity | Connector Accessories 9 POS Strain Relief Kit Thermoplastic Red Individual (Alt: 207601-1) RoHS : Compliant | 0 | |||
| 2076025016 | Molex | Flexible Braided Ground Straps with Insulation 24x530 Type 152mm Length (Alt: 2076025016) | 0 | |||
| PTVS2-076C-H | Bourns Inc | - Tape and Reel (Alt: PTVS2-076C-H) RoHS : Compliant | 0 | |||
| BZV15/A0420/76 | Bulgin | (Alt: BZV15/A0420/76) RoHS : Compliant | 0 | |||
| SUPERTHERMAL-B132-30-02-0762-0762 | Boyd Corporation | THDSuperThermalB132300207620762 (Alt: 058679) RoHS : Compliant | 0 | |||
| SUPERTHERMAL-A072-10-02-0762-0762 | Boyd Corporation | THDSuperThermalA072100207620762 (Alt: 058674) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 12402076E512A | Amphenol Corporation | (Alt: 12402076E512A) RoHS : Compliant |
| 3,000 | |
0901220765![]() | Molex | Pin Header, 10 Contacts, 2 Rows, 2.54mm, Gold, 3A, Right Angle, Unshrouded, Brass, Wire-to-Board (Alt: 0901220765) RoHS : Compliant | 0 | |||
| 0901220763 | Molex | Pin Header, 6 Contacts, 2 Rows, 2.54mm, Gold, 3A, Right Angle, Unshrouded, Brass, Wire-to-Board (Alt: 0901220763) RoHS : Compliant | 0 | |||
| 142-0761-831 | Bel Fuse | (Alt: 142-0761-831) RoHS : Compliant | 0 | |||
| 12402076E512A | Amphenol Corporation | Connector USB4 Type C Receptacle 24 Position 0.5mm Right Angle Surface Mount 1 Port T/R (Alt: 12402076E512A) RoHS : Compliant | 0 | |||
| U77-E162H-20761A | Amphenol Corporation | (Alt: U77-E162H-20761A) RoHS : Compliant | 0 | |||
| 2339207-6 | TE Connectivity | (Alt: 2339207-6) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MIC2076-1YM | Microchip Technology Inc | DUAL USB HIGHSIDE POWER SWITCH (Alt: MIC2076-1YM) RoHS : Compliant | 0 | ||
| MIC2076-2YM | Microchip Technology Inc | (Alt: MIC2076-2YM) RoHS : Compliant | 0 | |||
| MIC2076A-2YM | Microchip Technology Inc | DUAL USB HIGHSIDE POWER SWITCH (Alt: MIC2076A-2YM) RoHS : Compliant | 0 | |||
| MIC2076A-1YM | Microchip Technology Inc | USB Power SW Hi SideDIST Dual 27V to 55V 07A 8Pin SOIC (Alt: MIC2076A-1YM) RoHS : Compliant | 0 | |||
| MIC2076-2YM-TR | Microchip Technology Inc | (Alt: MIC2076-2YM-TR) RoHS : Compliant | 0 | |||
| MIC2076-1YM-TR | Microchip Technology Inc | (Alt: MIC2076-1YM-TR) RoHS : Compliant | 0 | |||
| MIC2076A-1YM-TR | Microchip Technology Inc | (Alt: MIC2076A-1YM-TR) RoHS : Compliant | 0 | |||
| RJK2076DPA-00#J5A | Renesas Electronics Corporation | (Alt: RJK2076DPA-00#J5A) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 76002076 | Digi International Inc | Kit,WR54/WR64 Power Supply |
| 0 | |
![]() Chip-Germany GmbH | WL260-S270 6020767 | SICK AG | 1 | |||
![]() Component Electronics, Inc | 21-01-2076 | Molex | IN STOCK SHIP TODAY |
| 3,000 | |
| 207610-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 402 | ||
| 78207-612 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 400 | ||
| 207604-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 79 | ||
| MIC2076-1YM | Micrel Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 55 | ||
| 1020-76 | Wakefield-Vette | IN STOCK SHIP TODAY |
| 42 | ||
| 207601-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 207619-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| M39014/22-0766 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| C3207-6 | MAC | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | FHS-207-6 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 3,343 | |
| 2076 | Heyco | UB 625 WHITE | 0 | |||
| 20767129 | Essentra Components | 0 | ||||
| 20767174 | Essentra Components | 0 | ||||
| 1220765 | Essentra Components | 0 | ||||
| HS2076A | Essentra Components | HOOK - S STYLESPRING STEEL | 0 | |||
| 20767341 | Essentra Components | 0 | ||||
| HC12076A | Essentra Components | HOOK - C STYLESPRING STEEL | 0 | |||
| 20767068 | Essentra Components | 0 | ||||
| 20767112 | Essentra Components | 0 | ||||
| 20767518 | Essentra Components | 0 | ||||
| 20767563 | Essentra Components | 0 | ||||
| 1220766 | Essentra Components | 0 | ||||
| 1207-6-A-6 | RAF Electronic Hardware | 0 | ||||
| 1220767 | Essentra Components | 0 | ||||
![]() EBV Elektronik | MIC2076-2YM | Microchip Technology Inc | (Alt: MIC2076-2YM) RoHS : Compliant | 95 | ||
| MIC2076-1YM | Microchip Technology Inc | DUAL USB HIGHSIDE POWER SWITCH (Alt: MIC2076-1YM) RoHS : Compliant | 0 | |||
| MIC2076-2YM-TR | Microchip Technology Inc | (Alt: MIC2076-2YM-TR) RoHS : Compliant | 0 | |||
| MIC2076-1YM-TR | Microchip Technology Inc | (Alt: MIC2076-1YM-TR) RoHS : Compliant | 0 | |||
| MIC2076A-1YM-TR | Microchip Technology Inc | (Alt: MIC2076A-1YM-TR) RoHS : Compliant | 0 | |||
| MIC2076A-2YM-TR | Microchip Technology Inc | (Alt: MIC2076A-2YM-TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/11-20-76 | Whitmore/Wirenetics | Wire and Cable | 10,845 | ||
| SXL-207-6 | FDH Electronics | Wire and Cable | 4,000 | |||
| 512002076-F | FDH Electronics | BJG Microwave C | 3,469 | |||
| TXL-207-6 | FDH Electronics | Wire and Cable | 2,716 | |||
| TXL-207-6L9 | WORLD CLASS WIRE AND CABLE | Wire and Cable | 250 | |||
| 207654-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 75 | ||
| 512002076 | FDH Electronics | BJG Microwave C | 3 | |||
| 207600-1 | TE Connectivity | Connector Acc RoHS : Compliant |
| 1 | ||
| 2455RC 80820762 | Honeywell Sensing and Control | Thermistor |
| 0 | ||
| 390MS077NF1207-6 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 440BS031B2207-6A | Glenair Inc | Connector |
| 0 | ||
| 319FS001M1207-6T | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 440FS030M2207-6KPT | Glenair Inc | Backshells & Ac | 0 | |||
| 319AA001N1207-6 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 23A02076-65 | Cooper Interconnect | Backshells & Ac | 0 | |||
![]() Maritex | JPRH1207-681M | Jantek Electronics Co. | Inductor; SMD; 680uH; 0.85A; 1.13; 12.0x12.0x8mm; 20% |
| 3,773 | |
| JPRH1207-6R8M-8R4-A | Jantek Electronics Co. | Inductor; SMD; 6.8uH; 14A; 0.0335R; 12.5x12.5x8mm; 20% |
| 900 | ||
| 2-292207-6 | TE Connectivity | Male Pin Headers; 2-292207-6; TE CONNECTIVITY; 1; Tin; 6; 6 RoHS : Compliant |
| 290 | ||
| JPRH 1207-681M-1R0-A | Jantek Electronics Co. | Inductor; SMD; 680uH; 1.00A; 1.23R; 12.5x12.5x8mm; 20% |
| 265 | ||
| JPRH 1207-680M | Jantek Electronics Co. | Inductor; SMD; 68uH; 2.6A; 0.12R; 12.5x12.5x8mm; 20% |
| 179 | ||
![]() Pasternack Enterprises US | PE3C2076/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-195 Coax with HeatShrink. PE3C2076/HS is a SMA male to BNC male cable using LMR-195 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2076/HS SMA male to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 37,657 | ||
| PE3C2076/HS-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to BNC Male Low Loss Cable 50 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 50 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 50 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C2076/HS-50CM, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2076/HS-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2076/HS-50CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 50 cm length using LMR-195 coax with heatshrink. |
| 4,592 | ||
| PE3C2076/HS-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C2076/HS-24, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2076/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2076/HS-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with heatshrink. |
| 4,425 | ||
| PE3C2076/HS-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C2076/HS-60, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2076/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2076/HS-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with heatshrink. |
| 3,698 | ||
| PE3W12076/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to N Female Low Loss Cable Using LMR-400-DB Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female low loss cable using LMR-400-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug to N female low loss cable using LMR-400-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a type N cable connection on the other. Our low loss reverse polarity SMA to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W12076/HS can also be known as a low loss reverse polarity SMA male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12076/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA plug to type N female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to type N jack cable assembly PE3W12076/HS is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12076/HS can also be used in the other direction and will be a type N female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 215 | |||
| PE3W12076/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to N Female Low Loss Cable 24 Inch Length Using LMR-400-DB Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female low loss cable 24 inch length using LMR-400-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug to N female low loss cable 24 inch length using LMR-400-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a type N cable connection on the other. Our low loss reverse polarity SMA to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W12076/HS-24 can also be known as a low loss reverse polarity SMA male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12076/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA plug to type N female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to type N jack cable assembly PE3W12076/HS-24 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12076/HS-24 can also be used in the other direction and will be a type N female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 43 | ||
| PE2207-6 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 12.4 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 12.4 GHz to 18 GHz Rated To 50 Watts. RF coupler part number PE2207-6 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2207-6 is constructed with a coupling value of 6 dB and a coupler directivity of 15 dB. This female SMA directional coupler is built with a maximum insertion loss of 2.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 2.2 dB and a maximum VSWR of 1.3. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2207-6 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 3 | ||
| PE35207-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. Reverse Polarity SMA Male to BNC Male Cable 60 Inch Length Using RG58 Coax., Radio frequency assembly reverse polarity SMA male to BNC male cable 60 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to BNC male cable 60 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and BNC cable connection on the other. Our reverse polarity SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to BNC cable is a male to male coax assembly, PE35207-60, can also be known as a reverse polarity SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to BNC plug cable assembly PE35207-60 is built with RG58 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35207-60 can also be used in the other direction and will be BNC male to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to BNC male cable 60 inch length using RG58 coax. |
| 0 | ||
| PE3W22076 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Cable Using PE-P086HF Coax. PE3W22076 is a BNC male right angle to BNC male cable using PE-P086HF coax. This Pasternack BNC male right angle to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22076 BNC male right angle to BNC male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C2076LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using LMR-195 Coax, LF Solder. PE3C2076LF is a BNC male to SMA male cable using LMR-195 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2076LF BNC male to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02076 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG213 Coax. PE3W02076 is a N male to N male right angle cable using RG213 coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02076 N male to N male right angle cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W20760 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Female Cable Using TCOM-400 Coax. PE3W20760 is a reverse polarity SMA female to reverse polarity SMA female cable using TCOM-400 coax. This Pasternack reverse polarity SMA female to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20760 SMA reverse polarity female to SMA reverse polarity female cable assembly is constructed with TCOM-400 coax. | 0 | |||
| PE3W20761 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Female Bulkhead Cable Using PE-SR405FLJ Coax. PE3W20761 is a MMCX jack to SMA female bulkhead cable using PE-SR405FLJ coax. This Pasternack MMCX jack to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20761 MMCX jack to SMA female bulkhead cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C2076LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C2076LF/HS is a SMA male to BNC male cable using LMR-195 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2076LF/HS SMA male to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W20767/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to TNC Male Right Angle Cable Using LMR-100A-UF Coax with HeatShrink. PE3W20767/HS is a SMP female right angle to TNC male right angle cable using LMR-100A-UF coax. This Pasternack SMP female right angle to TNC male right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm TNC for connector 2. SMP right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20767/HS SMP female right angle to TNC male right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 1-292207-6 | TE Connectivity | MINI CT SGL DIP V 16P NAT PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 16 | PCB Header & Receptacle | Part Number: 1-292207-6 | Internal Number: 1-292207-6 | TE Connectivity RoHS : Compliant |
| 8,644 | |
| 207683-2 | TE Connectivity | AMPLIMITE,PIN CONT,SZ 22 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Contact Size: Size 22 Contact Base Material: Copper Alloy Product Terminates To: Printed Circuit Board Gold (Au) Pin Size 22 Copper Alloy | Connector Contact | Part Number: 207683-2 | Internal Number: 207683-2 | TE Connectivity RoHS : Compliant |
| 2,778 | ||
| 207654-1 | TE Connectivity | KEYING PLUG Connector Hardware Accessory Type: Keying Plug Primary Product Color: Natural Primary Product Material: Thermoplastic Operating Temperature (Max): 266 °F Operating Temperature (Max): 130 °C Keying Plug Natural | Connector Hardware | Part Number: 207654-1 | Internal Number: 207654-1 | Thermoplastic | TE Connectivity RoHS : Compliant |
| 2,589 | ||
| 5207661-3 | TE Connectivity | RCPT ASSY,37P,HDP-20,CN Number of Positions: 37 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 4 D-Shaped Connector | 37 Receptacle Cable-to-Cable Panel Mount | Part Number: 5207661-3 | Internal Number: 5207661-3 | 4 | TE Connectivity RoHS : Compliant |
| 901 | ||
| 320765 | TE Connectivity | TERMINAL,SOLIS R 12-10 3/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: 3/4 Closed Ring Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Ring Terminal | Part Number: 320765 | Internal Number: 320765 | TE Connectivity RoHS : Compliant |
| 678 | ||
| 207684-1 | TE Connectivity | AMPLIMITE,SKT CONT,SZ 22 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Contact Size: Size 22 Contact Base Material: Copper Alloy Product Terminates To: Wire & Cable Gold (Au) Socket Size 22 Copper Alloy | Connector Contact | Part Number: 207684-1 | Internal Number: 207684-1 | TE Connectivity RoHS : Compliant |
| 526 | ||
| 1-2342076-9 | TE Connectivity | 19POS HDR 90 DEG,HT,3.5MM PITCH,TL1.9MM Number of Positions: 19 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 19 Header Wire-to-Board .138" | Part Number: 1-2342076-9 | Internal Number: 1-2342076-9 | .138" | TE Connectivity RoHS : Compliant |
| 200 | ||
| 552076-1 | TE Connectivity | KIT, COVER, 180 DEG, 24 POS Connector Cover Type: Cover Kit Cable Exit Angle: 180 ° Primary Product Color: Black Primary Product Material: Polyphenylene Number of Positions: 24 Cover Kit 180 ° Black Polyphenylene | Connector Cap & Cover | Part Number: 552076-1 | Internal Number: 552076-1 | Alias Number: 500-060-3349 | TE Connectivity RoHS : Compliant |
| 194 | ||
| 132076-1 | TE Connectivity | STRATOTHERM 1/0 NIPL Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 1/0 AWG Wire Size: 41 – 60 mm² Wire Size: 98676 – 118412 CMA Stud Size: 5/16 M8 Closed Ring Tongue Terminal 1/0 AWG 41 – 60 mm² 98676 – 118412 CMA | Ring Terminal | Part Number: 132076-1 | Internal Number: 132076-1 | TE Connectivity RoHS : Compliant |
| 120 | ||
| 207603-1 | TE Connectivity | METRIMATE,STR REL KIT,18P Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: PA 66 Number of Positions: 18 Operating Temperature (Max): 130 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 207603-1 | Internal Number: 207603-1 | PA 66 | TE Connectivity RoHS : Compliant |
| 90 | ||
| 2342076-4 | TE Connectivity | 4POS HDR 90 DEG,HT,3.5MM PITCH, TL 1.9MM Number of Positions: 4 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 4 Header Wire-to-Board .138" | Part Number: 2342076-4 | Internal Number: 2342076-4 | .138" | TE Connectivity RoHS : Compliant |
| 88 | ||
| 207601-1 | TE Connectivity | METRIMATE,STR REL KIT,9P Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: PA 66 Number of Positions: 9 Operating Temperature (Max): 130 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 207601-1 | Internal Number: 207601-1 | PA 66 | TE Connectivity RoHS : Compliant |
| 56 | ||
| 2-2342076-0 | TE Connectivity | 20POS HDR 90 DEG,HT,3.5MM PITCH,TL1.9MM Number of Positions: 20 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 20 Header Wire-to-Board .138" | Part Number: 2-2342076-0 | Internal Number: 2-2342076-0 | .138" | TE Connectivity RoHS : Compliant |
| 39 | ||
| 1-2342076-6 | TE Connectivity | 16POS HDR 90 DEG,HT,3.5MM PITCH,TL1.9MM Number of Positions: 16 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 16 Header Wire-to-Board .138" | Part Number: 1-2342076-6 | Internal Number: 1-2342076-6 | .138" | TE Connectivity RoHS : Compliant |
| 5 | ||
| 207613-7 | TE Connectivity | SKT HDR ASSY,10P,MMATE LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 207613-7 | Internal Number: 207613-7 | TE Connectivity RoHS : Compliant |
| 2 | ||
![]() Vyrian | DC2076A-B | Analog Devices Inc | RoHS : Compliant | 9,889 | ||
| 1207653 | Phoenix Contact | Terminal Block Accessory, Din Rail, Steel RoHS : Compliant | 9,008 | |||
V62/07614-01XE![]() | Texas Instruments | Power Supply Support Circuit, PQCC20 RoHS : Compliant | 8,781 | |||
V62/07606-01XE![]() | Texas Instruments | Operational Amplifier, 2 Func, 2000uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 8,419 | |||
V62/07623-01XE![]() | Texas Instruments | Buffer, AUP/ULP/V Series, 1-Func, 1-Input, CMOS, PDSO5 RoHS : Compliant | 8,348 | |||
V62/07602-04XE![]() | Texas Instruments | Three Terminal Voltage Reference, 1 Output, 4.096V, CMOS, PDSO6 RoHS : Compliant | 8,249 | |||
V62/07647-01XE![]() | Texas Instruments | Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16 RoHS : Compliant | 5,841 | |||
V62/07648-01XE![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, BICMOS, PDSO16 RoHS : Compliant | 5,484 | |||
V62/07612-03NE![]() | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 5,471 | |||
| BCM2076B1KUBG | Broadcom Limited | 4,688 | ||||
| 207601-1 | TE Connectivity | Connector Accessory, Strain Relief Kit, Polyamide RoHS : Compliant | 4,627 | |||
V62/07630-01XE![]() | Texas Instruments | Binary Counter, LV/LV-A/LVX/H Series, Asynchronous, Positive Edge Triggered, 12-Bit, Up Direction, CMOS, PDSO16 RoHS : Compliant | 4,025 | |||
V62/07636-01XE![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, PMOS, PDSO5 RoHS : Compliant | 3,815 | |||
V62/07611-01XE![]() | Texas Instruments | Line Driver, 2 Func, 4 Driver, BICMOS, PDSO20 RoHS : Compliant | 3,229 | |||
| R142.076.161 | Radiall | RF BNC Connector, 1 Contact(s), Male, Cable Mount, Crimp Terminal, Plug RoHS : Compliant | 334 | |||
![]() Waytek, Inc. | 142076-91W | General Cable Technologies Corporation | 20GA TXL Pink Cross-Link Automotive Wire XLPE -51C to 125C |
| 128,360 | |
![]() Win Source Electronics | DEA255375BT-2076A1 | TDK Corporation | FILTER BANDPASS 5 GHZ WLAN SMD RoHS : Compliant |
| 47,695 | |
| MIC2076-1YM | Microchip Technology Inc | IC DISTRIBUTION SW DUAL 8-SOIC RoHS : Compliant |
| 25,390 | ||
MIC2076-1YMTR![]() | Microchip Technology Inc | IC DISTRIBUTION SW DUAL 8-SOIC RoHS : Compliant |
| 22,980 | ||
| MIC2076-1YM-TR | Microchip Technology Inc | IC PWR SWITCH N-CHAN 1:2 8SOIC RoHS : Compliant |
| 22,980 | ||
| MAX20766EPE+ | Maxim Integrated Products | SMART SLAVE IC WITH INTEGRATED C |
| 4,261 | ||
| 32207605 | YAGEO Corporation | SENSOR RTD 100OHM 0.3% 0805 |
| 4,110 | ||
| MAX20766EPE+T | Maxim Integrated Products | IC SMART SLAVE IC 16FCQFN RoHS : Compliant |
| 4,010 | ||
| 32207615 | YAGEO Corporation | SENSOR RTD 1KOHM 0.12% 0805 |
| 2,052 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |