 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
210CP-R33 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Neutron USA | 2210-T210-K0M1-H121-10A | E-T-A | Circuit Breakers 1077, 1P, DM, 277VAC/65VDC,M1, 1NO AUX, 10A RoHS : Compliant |
| 50 | |
| 21033021000 | HARTING Technology Group | Circular Metric Connectors male m12-p-acc RoHS : Compliant |
| 50 | ||
| HIH8121-021-001 | Honeywell Sensing and Control | Board Mount Humidity Sensors SIP 4-Pin w/ Filter Resists Condensation RoHS : Compliant |
| 20 | ||
| 2210-T210-K0M1-H121-32A | E-T-A | Circuit Breakers 1077, 1P, DM, 277VAC/65VDC,M1, 1NO AUX, 32A RoHS : Compliant |
| 0 | ||
| 1410-L210-L2F1-S02-10A | E-T-A | Circuit Breakers Single pole press-to-reset thermal circuit breaker with extremely fast overload switching performance (R-type TO CBE to EN 60934), PCB mounting. Miniaturised construction minimises PCB real estate required. Type 1410-L2 features chang RoHS : Compliant |
| 0 | ||
| 21033021000407 | HARTING Technology Group | Circular Push Pull Connectors M12 Housing rear mount for male pcb mount RoHS : Compliant |
| 0 | ||
| DC12.2102.101 | Schurter Electronic Components | AC Power Entry Modules Snap-in 2-pole 2A Standard RoHS : Compliant |
| 0 | ||
| 2210-T210-K0T1-H121-3A | E-T-A | Circuit Breakers MoQ=10 Non-Preferred Part (Build to Order) - Alternative Stocked Part Number 2210-T210-K0M1-H131-3A 93 RoHS : Compliant |
| 0 | ||
| 21033021001 | HARTING Technology Group | Circular Metric Connectors male m12-p-acc RoHS : Compliant |
| 0 | ||
| 2210-T210-K0M1-H0-10A | E-T-A | Circuit Breakers Non-Preferred Part (Build to Order) - Alternative Stocked Part Number 2210-T210-K0M1-H131-10A94 |
| 0 | ||
| 6136.0137.0210, 6136.CFTBF150C0.0210 | Schurter Electronic Components | Schurter 6136.0137.0210 inlet with circuit breaker IEC Appliance inlet C20 1 pole snap in 15A |
| 0 | ||
| 2210-T210-K0M1-H121-3A | E-T-A | Circuit Breakers 1077, 1P, DM, 277VAC/65VDC,M1, 1NO AUX, 3A RoHS : Compliant |
| 0 | ||
| HIH6121-021-001 | Honeywell Sensing and Control | Digital Humidity/Temperature Sensor, Op HR: 0-100%RH, H/T Accuracy: ±4 %RH/±0.5 °C, Digital I²C output, H/T Resp t: 8/30s, Vs 3.3V, SIP 4 Pin, hydrophobic filter RoHS : Compliant |
| 0 | ||
| DC12.2102.103 | Schurter Electronic Components | AC Power Entry Modules DC12 PWR ENTRY MODUL 2A RoHS : Compliant |
| 0 | ||
| 2210-T210-K0F2-H121-16A | E-T-A | Circuit Breakers 1077, 1P, DM, 277VAC/65VDC,F2, 1NO AUX, 16A RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3FCA082-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual LC APC to SC APC, SM OS2, 2.0mm Riser, Yellow - 10 meter. Pasternack’s PE3FCA082-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex LC/APC to SC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVDF jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA082-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/APC to SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 69 | |
| PE3C6192-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 7/16 DIN Male to N Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6192-100CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly PE3C6192-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6192-100CM can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3C6210-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum SMA Male to SMA Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-SM-LP SMA cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6210-200CM, can also be known as a low PIM TC-SPP250-SM-LP SMA plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6210-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-SM-LP SMA cable assembly is manufactured with TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-SM-LP SMA male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6210-200CM can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-SM-LP SMA male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-SM-LP SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 37 | ||
| PE20DV2108 | Pasternack Enterprises | Key Specifications. Connector Series In 1.0mm Connector Gender In Male Minimum Frequency DC Maximum Frequency 110 GHz Impedance 50 Ohm Maximum Input Power 0.2 Watt. 2 Way 1.0 mm Input (Male) Power Divider, From DC to 110 GHz, Rated at 0.2 Watts. Pasternack carries a wide selection of power dividers to fit your needs. These components are essential in many systems, allowing the combination of multiple signals or splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s resistive and Wilkinson power dividers come with excellent performance featuring minimal loss, high isolation and low VSWR. They are available in both narrow and broad bandwidths with a variety of connector types such as 2.92mm, BNC, N, SMA and 1.0 mm(W1). The PE20DV2108 is a 2-way resistive power splitter that operates from DC to 110 GHz and can handle up to 0.2 Watt (CW) with 9.5 dB max insertion loss. The package interface uses 1.0 mm (W1) female connectors for the output and a 1.0 mm (W1) male connector for the input. |
| 0 | ||
| PE2212-10 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 7 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB SMA Coupler From 7 GHz to 18 GHz Rated To 50 Watts. RF coupler part number PE2212-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 7 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2212-10 is constructed with a coupling value of 10 dB and a coupler directivity of 15 dB. This female SMA directional coupler is built with a maximum insertion loss of 1.1 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 1.1 dB and a maximum VSWR of 1.35. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2212-10 directional 10 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
| PE342-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Male Right Angle Low Loss Test Cable 100 CM Length Using PE-P142LL Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss test cable 100 cm length using PE-P142LL coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle low loss test cable 100 cm length using PE-P142LL coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss test SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE342-100CM, can also be known as a low loss test SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE342-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE342-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss test SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss test cable 100 cm length using PE-P142LL coax with heatshrink, LF solder. |
| 0 | ||
| PE34210-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Right Angle Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly N male to N male right angle cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34210-24, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34210-24 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34210-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 24 inch length using RG316 coax. |
| 0 | ||
| PE35210LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to Reverse Polarity SMA Male Cable 36 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity SMA male cable 36 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity SMA male cable 36 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity SMA cable is a male to male coax assembly, PE35210LF-36, can also be known as a SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA plug cable assembly PE35210LF-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35210LF-36 can also be used in the other direction and will be reverse polarity SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA male cable 36 inch length using RG188 coax, RoHS. |
| 0 | ||
| PE1005-2-100PK | Pasternack Enterprises | PHILLIPS SCREW THREAD SIZE: #4-40 LENGTH (INCHES): 3/8" MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*. |
| 0 | ||
| PE3210LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMC Plug Cable 18 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMA male to SMC plug cable 18 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 18 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE3210LF-18, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE3210LF-18 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3210LF-18 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 18 inch length using RG58 coax, RoHS. |
| 0 | ||
| PE3C2082-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7582-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 100 cm Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 100 cm length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 100 cm length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C7582-100CM, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7582-100CM is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7582-100CM can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 100 cm length using PE-SR402FLJ coax. |
| 0 | ||
| PE3W02107-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. N Male Right Angle to N Male Right Angle Cable 108 Inch Length Using RG214 Coax., Radio frequency assembly N male right angle to N male right angle cable 108 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle cable 108 inch length using RG214 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and right angle type N cable connection on the other. Our right angle type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3W02107-108, can also be known as a right angle type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W02107-108 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency type N right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle cable 108 inch length using RG214 coax. |
| 0 | ||
| PE3W21076/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Female Cable Using LMR-240 Coax with HeatShrink. PE3W21076/HS is a 4.3-10 male to N female cable using LMR-240 coax. This Pasternack 4.3-10 male to N female cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. Our male 4.3-10 to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21076/HS 4.3-10 male to N female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21085 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMA Male Cable Using PE-P086HF Coax. PE3W21085 is a SMP male bulkhead to SMA male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21085 SMP male bulkhead to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
 Relay Specialties | 31042102 | METZ CONNECT USA | RIA CONNECTOR RoHS : Compliant |
| 300 | |
| 9002-12-10 | Coto Technology USA | Reed Relay, SIP 6-Pin, Mount 12 VDC, 1A SPST-NO ES Shield: N/A, RF Shield: Yes RoHS : Compliant |
| 109 | ||
| MC210-50011 | BlockMaster Blocks | PCB Terminal Block; 11-pos 5.00mm; Green |
| 50 | ||
| MC210-50015 | BlockMaster Blocks | PCB Terminal Block; 15-pos 5.00mm; Green |
| 50 | ||
| MC210-50002 | BlockMaster Blocks | PCB Terminal Block; 2-position 5.00mm; Green |
| 46 | ||
| MC210-50808 | BlockMaster Blocks | PCB Terminal Block; 8-position 5.08mm; Green |
| 44 | ||
| AQV210A | Panasonic Electronic Components | MOSFET Relay; 1A SPST-NO 350 V; 0.13 A; DIP6 Surface Mount; 35 ohm RoHS : Compliant |
| 40 | ||
| MC210-50804 | BlockMaster Blocks | PCB Terminal Block; 4-position 5.08mm; Green |
| 40 | ||
| OTB-210N-8P-C | BlockMaster Blocks | Barrier Terminal Block; 8-pos 0.300"; 10A; 250V; Black Cover |
| 40 | ||
| MC210-50802 | BlockMaster Blocks | PCB Terminal Block; 2-position 5.08mm; Green |
| 37 | ||
| TH461221000 | Johnson Electric Group | T-H GREEN LENS (TH31-903G) |
| 21 | ||
| 3570-1210-053 | Comus International | Reed Relay |
| 10 | ||
| 21009-82 | Deltrol Controls | Power Relay, 24 VAC 3A 3PST-NO, 30 Amps Bracket Mount, Top Mount |
| 8 | ||
| 7102-12-1010 | Coto Technology USA | Reed Relay, PC Board, Mounting 12 VDC, 2A DPST-NO ES Shield: Yes, RF Shield: N/A RoHS : Compliant |
| 5 | ||
| 7204-12-1010 | Coto Technology USA | Reed Relay, PC Board, Mounting 12 VDC, 4A 4PST-NO ES Shield: Yes, RF Shield: N/A RoHS : Compliant |
| 5 | ||
 TE Connectivity | 1-2106489-2 | TE Connectivity | Connector, Thru Hole-IDC, 2 pos, 20AWG Connector System: Wire-to-Board Number of Positions: 2 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 2 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 22,321 | |
| 1-2106431-1 | TE Connectivity | Connector, SMT-IDC PASS THRU, 1 POS, 20 Connector System: Wire-to-Board Number of Positions: 1 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 1 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 18,657 | ||
| 1-2106003-2 | TE Connectivity | Connector, SMT-IDC, 2 POS, 20 AWG Connector System: Wire-to-Board Number of Positions: 2 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 2 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 14,918 | ||
| 1-2106489-1 | TE Connectivity | Connector, Thru Hole-IDC, 1 pos, 20AWG Connector System: Wire-to-Board Number of Positions: 1 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 1 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 7,696 | ||
| 1-2106489-3 | TE Connectivity | Connector, Thru Hole-IDC, 3 pos, 20AWG Connector System: Wire-to-Board Number of Positions: 3 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 3 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 3,744 | ||
| 1-2106003-4 | TE Connectivity | Connector, SMT-IDC, 4 POS, 20 AWG Connector System: Wire-to-Board Number of Positions: 4 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 4 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 3,647 | ||
| 1-2106431-2 | TE Connectivity | Connector, SMT-IDC PASS THRU, 2 POS, 20 Connector System: Wire-to-Board Number of Positions: 2 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 2 4" .16 mm | Ampseal Header | 4" | TE Connectivity RoHS : Compliant |
| 3,152 | ||
| 1-2102061-5 | TE Connectivity | Mezalok, Socket, 114 p, 15 mm, 30 Au, TL PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 114 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity RoHS : Compliant |
| 230 | ||
| 1-2102061-4 | TE Connectivity | Mezalok, Socket, 114 p, 15 mm, 50 Au, LF PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 114 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity RoHS : Compliant |
| 220 | ||
| 1-2102061-6 | TE Connectivity | Mezalok, Socket, 114 p, 15 mm, 30 Au, LF PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 114 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity RoHS : Compliant |
| 210 | ||
| RN122-1-02-10M | TE Connectivity | RN122-1-02-10M Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal 300 VDC 1 A PCB Terminal PD2 | TE Connectivity RoHS : Compliant |
| 157 | ||
| T2100122101-000 | TE Connectivity | HK4/8-012-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 12 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 12 14 – 20 AWG | TE Connectivity RoHS : Compliant |
| 28 | ||
| T4130012121-000 | TE Connectivity | M12,REAR MOUNT,MALE,A,12P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 12 18 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 11 | ||
| T2100062101-000 | TE Connectivity | HK4/2-006-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 6 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 6 14 – 20 AWG | TE Connectivity RoHS : Compliant |
| 2 | ||
| T1210240121-000 | TE Connectivity | H24B-TS-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | TE Connectivity RoHS : Compliant |
| 1 | ||
 Teledyne HiRel | 5962-8982101GA | Teledyne HiRel | PERIPHERAL DRIVER, DUAL NOR, CMOS-COMPATIBLE, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9221004MEA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8855210NA | Teledyne HiRel | STATIC RAM, 32K X 8, LOW-POWER, 20 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8982101PA | Teledyne HiRel | PERIPHERAL DRIVER, DUAL NOR, CMOS-COMPATIBLE, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9221002M2A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8855210YA | Teledyne HiRel | STATIC RAM, 32K X 8, LOW-POWER, 20 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8855210TA | Teledyne HiRel | STATIC RAM, 32K X 8, LOW-POWER, 20 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9221004MFA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9952101QYA | Teledyne HiRel | PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ RoHS : Not Compliant | 0 | |||
M38510/21002BLA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9221002MEA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
M38510/21002BKA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| LH2108ADBEA | Teledyne HiRel | OP AMP, DUAL Note LTC Die on hold | 0 | |||
| 5962-9221004M2A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| M38510/21002BJA | Teledyne HiRel | PROM, 2K X 8, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | TFCR1210-4W-E-2102BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;21K;�0.1% RoHS : Compliant | 0 | ||
| TFCR1210-4W-E-2210CT | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;221R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-2210FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;221R;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1210DT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;121R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-2101DT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;2.1K;�0.5% RoHS : Compliant | 0 | |||
| CR1210-4W-1210FT | VENKEL LTD | Chip Resistor;1210;1/4W;121R;�1% RoHS : Compliant | 0 | |||
| CR1210-4W-2101FT | VENKEL LTD | Chip Resistor;1210;1/4W;2.1K;�1% RoHS : Compliant | 0 | |||
C1210C0G102-100JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;1000V;10pF;�5% RoHS : Compliant | 0 | |||
| PWCR1210-WK-2102DT | VENKEL LTD | Pulse Withstanding CR;1210;3/4W;�100PPM;21K;�0.5% RoHS : Compliant | 0 | |||
| CR1210-4W-2102FT | VENKEL LTD | Chip Resistor;1210;1/4W;21K;�1% RoHS : Compliant | 0 | |||
| HPCR1210-W-2100FT | VENKEL LTD | High Power CR;1210;3/4W;210R;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-2102FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;21K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UE-2100FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;210R;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UE-2210DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;221R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1210-UN-2210CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;221R;�0.25% RoHS : Compliant | 0 | |||
 Vyrian | C1210C107M8PAC7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 10V, 20% +Tol, 20% -Tol, X5R, 15% TC, 100uF, Surface Mount, 1210 | 47,650 | ||
| C1210X225K1RACAUTO7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 2.2uF, Surface Mount, 1210 | 40,900 | |||
| C1210C107M4PAC7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X5R, 15% TC, 100uF, Surface Mount, 1210 | 31,300 | |||
| C1210C226K4RAC7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 16V, 10% +Tol, 10% -Tol, X7R, 15% TC, 22uF, Surface Mount, 1210 | 11,750 | |||
| 851-41-032-10-021000 | Mill-max Mfg | 10,000 | ||||
| C1210C620FBGAC7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 630V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.000062uF, Surface Mount, 1210 | 3,900 | |||
| C1210C620GBGAC7210 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 630V, 2% +Tol, 2% -Tol, C0G, 30ppm/Cel TC, 0.000062uF, Surface Mount, 1210 | 3,100 | |||
| 1147-0-18-01-21-02-10-0 | Mill-max Mfg | 2,300 | ||||
| MAL210452103E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 10000uF, Chassis Mount RoHS : Compliant | 2,050 | |||
| 210-332/1000-202 | WAGO Innovative Connections | Terminal Block Accessory RoHS : Compliant | 1,600 | |||
| I210ISWGI210ISSLJXX | Intel Corporation | 200 | ||||
| HIH6121-021-001S | Honeywell Sensing And Control | Serial Switch/Digital Sensor, 14 Bit(s), 1Cel, Rectangular, Through Hole Mount | 130 | |||
| ADP2102-1-0-EVALZ | Analog Devices Inc | 83 | ||||
| CM8062101421002S R0Z1 | Intel Corporation | 30 | ||||
| 5962-1022102VSX | Texas Instruments | Switching Regulator, 1100kHz Switching Freq-Max, CDFP20 | 13 | |||
 Waytek, Inc. | 643221029 | Molex | CP Terminal 0.6 Sn - 0.75sqmm (Reel = 11,500 pcs) |
| 34,500 | |
| 19221-0407 | Molex | 6GA Copper Eyelet 5/16" Stud RoHS : Unknown |
| 3,665 | ||
| 19221-0382 | Molex | 4/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 3,577 | ||
| 19221-0421 | Molex | 1GA Copper Eyelet 1/4" Stud RoHS : Unknown |
| 864 | ||
| 19221-0245 | Molex | 2/0 GA Tinned Eyelet 1/2" Stud RoHS : Compliant |
| 411 | ||
| 55021-07 | Cole Hersee | Cole Hersee 55021-07 PVC-coated heavy-duty metal toggle switch is an SPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three 8" wire leads, an O-ring-sealed stem, and PVC-coated housing. |
| 240 | ||
| 892-1251-210-50 | Trombetta | 12V Isolated DC Contactor Intermittent Duty |
| 46 | ||
| 21015C10 | Eaton Electronics | Sure Power Converter 24V to12V 15 Amps, Switched Outputs |
| 9 | ||
PDM21001LXM | Littelfuse Inc | HWB60-NG 280 Metri-Pack Style Power Distribution Module RoHS : Compliant |
| 0 | ||
| 19221-0224 | Molex | 8GA Tinned Eyelet 1/4" Stud RoHS : Compliant |
| 0 | ||
| 19221-0232 | Molex | 4GA Tinned Eyelet 3/8" Stud RoHS : Compliant |
| 0 | ||
| 643221039 | Molex | CP Terminal 0.6 Sn - 0.50sqmm |
| 0 | ||
| 19221-0377 | Molex | 1/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 0 | ||
| 19221-0233 | Molex | 2GA Tinned Eyelet 5/16" Stud RoHS : Compliant |
| 0 | ||
| 142212-10IE | General Cable Technologies Corporation | 1/0 GA SGX Red Cross-Link Bare Copper Battery Cable -51C to 125C 1064/30 Strand |
| 0 | ||
 Win Source Electronics | 12105C475K4Z2A | Kyocera AVX Components | CAP CER 4.7UF 50V X7R 1210 RoHS : Compliant |
| 44,820 | |
AD2S1210WDSTZ | Analog Devices Inc | Variable Resolution, 10-Bit to 16-Bit R/D Converter | IC R/D CONV 10/12/14/16B 48LQFP RoHS : Compliant |
| 40,000 | ||
| DUP2105SOQ-7 | Diodes Incorporated | TVS DIODE 24VWM 44VC SOT23 T&R / 44V Clamp 8A Ipp Tvs Diode Surface Mount SOT-23-3 RoHS : Compliant |
| 33,000 | ||
| SDR0302-101KL | Bourns Inc | RoHS : Compliant |
| 24,781 | ||
| 20021321-00008C4LF | Amphenol Corporation | CONN RCPT 8POS 0.05 GOLD SMD |
| 16,185 | ||
| TUSB1210BRHBRQ1/TUSB1210BRHBTQ1 | Texas Instruments |
| 15,983 | |||
CP2102N-A01-GQFN28 | Silicon Laboratories Inc | USBXpress Family RoHS : Compliant |
| 10,000 | ||
| ATWINC3400-MR210CA131-T | Microchip Technology Inc | RF TXRX MOD BT WIFI CHIP SMD RoHS : Compliant |
| 6,570 | ||
| SMD1210B020TF | YAGEO Corporation | PPTC SMD 1210, 30V 0.2A, REEL 7" / Polymeric PTC Resettable Fuse 30V 200 mA Ih Surface Mount 1210 (3225 Metric), Concave RoHS : Compliant |
| 5,325 | ||
| R7S721021VCFP#AA0 | Renesas Electronics Corporation | IC MCU 32BIT ROMLESS 208LFQFN |
| 5,090 | ||
| ECN30210P | Hitachi Ltd |
| 3,800 | |||
AD9634BCPZ-210 | Analog Devices Inc | IC ADC 12BIT PIPELINED 32LFCSP RoHS : Compliant |
| 1,120 | ||
AD210BN | Analog Devices Inc | Precision, Wide Bandwidth 3-Port Isolation Amplifier RoHS : Not Compliant |
| 1,000 | ||
ADSP-21065LKSZ-264 | Analog Devices Inc | DSP Floating-Point 32bit 66MHz 66MIPS Automotive 208-Pin MQFP Tray / IC DSP CONTROLL 544KBIT 208-MQFP RoHS : Compliant |
| 250 | ||
ADSP-21060KSZ-160 | Analog Devices Inc | SHARC Processor RoHS : Compliant |
| 200 | ||
 Wuhan P&S | CRCW12102K21FKEA | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 50,000 | |
| AY2101K29Y5SS63L7 | Vishay Intertechnologies | Ceramic Capacitor Y5S, Wafer Type 100 pF ��10% 440VAC RoHS : Compliant |
| 49,000 | ||
IRFL210TRPBF | Vishay Intertechnologies | 200V,1.5��,0.96A,N-Channel Power MOSFET RoHS : Compliant |
| 30,000 | ||
| CRCW040210R5FKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors, RoHS : Compliant |
| 10,000 | ||
| SZNUP2105LT3G | onsemi | CAN Bus Protector,2 Line,Bidirectional RoHS : Compliant |
| 10,000 | ||
| AY2101K29Y5SS6TL0 | Vishay Intertechnologies | Automotive Grade EMI Suppression Safety Capacitor, Ceramic Disc RoHS : Compliant |
| 8,500 | ||
NTS2101PT1G | onsemi | Power MOSFET 8.0V, 1.4A, Single P Channel, SC70 RoHS : Compliant |
| 6,000 | ||
| NCS32100XMNTXG | onsemi | - RoHS : Compliant |
| 5,000 | ||
| 10037912-101LF | Amphenol FCi | AIRMAX: 10.8 mm Guide Module Receptacle RoHS : Compliant |
| 3,300 | ||
| MJD210G | onsemi | Complementary Plastic Power Transistors RoHS : Compliant |
| 1,200 | ||
| STL210N4F7 | STMicroelectronics | 40V,1.6m��,120A,N-Channel Power MOSFET RoHS : Compliant |
| 60 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British