3132-R2 Price, Distributor, Stock

Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening.

R4-EM-73-132

Southco

Southcos R4-EM5 7 Series Electronic Rotary Latch provides reliable electronic access control in demanding environments. With its corrosion-resistant plated-steel or stainless steel outer body construction and fully-sealed internal actuator the Outdoor R

R4-EM-R53-132

Southco

E3-13-27

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

M15003132545BMODL2.77M

RAF Electronic Hardware

RAFM1500-3.13-2545-BMODL=2.7MM

Southco

Southco

Southco

RAF Electronic Hardware

R4-EM-13-132

Southco

Easy to install and maintain the 1 2 Series R4-EM delivers the convenience of electronic access control with the security of a proven robust all-metal rotary latch design in a compact integrated package. Easy push-to-close operation and electronic ac

R4-EM-R13-132

Southco

R4-EM-R13-132

FDH Electronics

6313-201-0902

TE Connectivity

Circular Conn

1 : $2.054
5 : $1.915
10 : $1.712
25 : $1.686
50 : $1.686
100 : $1.662
250 : $1.614
500 : $1.569
1,000 : $1.548
2,500 : $1.548
10,000 : $1.548

2,443

6313-203-2302

TE Connectivity

Circular Conn

1 : $2.716
5 : $2.532
10 : $2.263
25 : $2.229
50 : $2.229
100 : $2.196
250 : $2.134
500 : $2.074
1,000 : $2.046
2,500 : $2.046
10,000 : $2.046

965

6313-203-1902

TE Connectivity

Circular Conn

1 : $3.309
5 : $3.085
10 : $2.758
25 : $2.716
50 : $2.716
100 : $2.676
250 : $2.6
500 : $2.528
1,000 : $2.493
2,500 : $2.493
10,000 : $2.493

897

6313-201-1702

TE Connectivity

Circular Conn

1 : $4.127
5 : $3.847
10 : $3.439
25 : $3.388
50 : $3.388
100 : $3.338
250 : $3.243
500 : $3.153
1,000 : $3.11
2,500 : $3.11
10,000 : $3.11

791

6313-201-1102

TE Connectivity

Circular Conn

1 : $3.512
5 : $3.274
10 : $2.927
25 : $2.883
50 : $2.883
100 : $2.841
250 : $2.759
500 : $2.683
1,000 : $2.646
2,500 : $2.646
10,000 : $2.646

259

M85049/31-32W

Amphenol PCD

Connector Acc

1 : $25.398
5 : $25.398
10 : $22.41
25 : $21.165
50 : $21.165
100 : $20.409
250 : $19.705
500 : $19.705
1,000 : $19.048
2,500 : $19.048
10,000 : $18.434

196

31-3220

Amphenol RF

RF / Coaxial

1 : $19.073
5 : $17.78
10 : $15.894
25 : $15.657
50 : $15.657
100 : $15.426
250 : $14.986
500 : $14.569
1,000 : $14.37
2,500 : $14.37
10,000 : $14.37

313.2

Littelfuse Inc

Circuit Protect
RoHS : Unknown

31-320-RFX

Amphenol RF

RF / Coaxial

1 : $1.927
5 : $1.797
10 : $1.606
25 : $1.582
50 : $1.582
100 : $1.559
250 : $1.514
500 : $1.472
1,000 : $1.452
2,500 : $1.452
10,000 : $1.452

W-2313-2255

Whitmore/Wirenetics

Hook-Up Wire

31-321

Amphenol RF

Connector

1 : $5.982
5 : $5.576
10 : $4.985
25 : $4.91
50 : $4.91
100 : $4.838
250 : $4.7
500 : $4.569
1,000 : $4.507
2,500 : $4.507
10,000 : $4.507

LM-12725-031324

ELECTRO ENTERPRISES INC

Wire and Cable

116331-3211

Smiths Interconnect

Connector

116431-3209

Smiths Interconnect

Circular Conn

1 : $8,143.992
5 : $8,143.992
10 : $7,185.876
25 : $6,786.66
50 : $6,786.66
100 : $6,544.28
250 : $6,318.615
500 : $6,318.615
1,000 : $6,107.994
2,500 : $6,107.994
10,000 : $5,910.962

116331-3232

Smiths Interconnect

Circular Conn

1 : $1,798.211
5 : $1,676.299
10 : $1,498.509
25 : $1,476.144
50 : $1,476.144
100 : $1,454.436
250 : $1,412.88
500 : $1,373.634
1,000 : $1,354.817
2,500 : $1,354.817
10,000 : $1,354.817

Flip Electronics

HCPL-2531#320

Broadcom Limited

Stock, Ship Today
RoHS : Not Compliant

1 : $2.0

600

SII3132CNU

Lattice Semiconductor Corporation

Stock, Ship Today
RoHS : Compliant

1 : $6.38

Neutron USA

09031326962

HARTING Technology Group

DIN 41612 Connectors DIN-SIGNAL C032MS-3,0C1-2-V1

1 : $29.99

1313280

Phoenix Contact

Circular Metric Connectors PRC 20/2-C3-FT25-FS2 5
RoHS : Compliant

1 : $39.99

1313275

Phoenix Contact

Circular Metric Connectors PRC 20/2-C1-FT25-FS2 5
RoHS : Compliant

1 : $34.99

1313276

Phoenix Contact

Circular Metric Connectors PRC 20/2-C2-FT25-MS2 5
RoHS : Compliant

1 : $39.99

09731326907

HARTING Technology Group

DIN 41612 Connectors DIN-SIGNAL 32P TYP R

1 : $29.99

1443132

Phoenix Contact

Sensor Cables / Actuator Cables SAC-3P- 10,0-PUR/A-1L-V
RoHS : Compliant

1 : $117.42

31320-K85M

BEI Sensors

Cordset, Str M12 F 8p to cut end, 7wire+shield 5m, YELLOW POLYURETHANE JACKET

1 : $288.95

45-2231.32H0.000

EAO AG

Switch Actuators Illuminated pushbutton actuator green transparent lens raised above bezel momentary front metal housing plastic
RoHS : Compliant

1 : $89.99

CFM-2507CF-0140-313-22

Same Sky

DC Fans dc axial fan, 25 mm square, 7 mm, 5 Vdc, omniCOOL, 14000 RPM, 3.09 CFM, TS/PWM
RoHS : Compliant

1 : $34.99

P6-331320

OTTO Engineering Inc

Limit Switches Mom. Actn Pin Rllr 7A 1, 2, & 4 Poles
RoHS : Compliant

1 : $334.99

83731324

Crouzet

Limit Switches Plunger, 2.2M Cbl THRD BRL PSHBTN

1 : $239.46

A3132546-AX

Axiom Manufacturing

Axiom A3132546-AX 2GB DDR3 SDRAM Memory Module

1 : $54.99

P5-D231324

OTTO Engineering Inc

Pushbutton Switches Alternate Action Dome Pushbutton Switch
RoHS : Compliant

1 : $89.99

09731326555

HARTING Technology Group

DIN 41612 Connectors DIN-SIGNAL R032MP-5,0C1-2

1 : $34.99

45-2131.3210.000

EAO AG

Switch Actuators Pushbutton actuator black lens level raised above bezel momentary front metal housing plastic
RoHS : Compliant

1 : $119.99

Pasternack Enterprises US

PE3C3132

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable Using Tinned RG405 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and female on end 2. PE3C3132 can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMA jack cable assembly PE3C3132 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3132 RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

233

PE3C3132-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and female on end 2. PE3C3132-18 can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMA jack cable assembly PE3C3132-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3132-18 RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3C3132-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and female on end 2. PE3C3132-36 can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMA jack cable assembly PE3C3132-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3132-36 RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

PE3C3132-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 12 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and female on end 2. PE3C3132-12 can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMA jack cable assembly PE3C3132-12 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3132-12 RF cable are available on our downloadable PDF datasheet. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE38313-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: LC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG218/U, RF Cable Type: RG218, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male to LC Male Cable 24 Inch Length Using RG218 Coax., Radio frequency assembly 7/16 DIN male to LC male cable 24 inch length using RG218 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to LC male cable 24 inch length using RG218 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to LC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and LC cable connection on the other. Our 7/16 DIN to LC cable assembly has male gender on end 1 and male on end 2. PE38313-24 can also be known as a 7/16 DIN plug to LC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. 7/16 DIN plug to LC plug cable assembly PE38313-24 is built with RG218 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to LC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38313-24 RF cable are available on our downloadable PDF datasheet.PE38313-24 can also be used in the other direction and will be LC male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to LC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to LC cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

1 : $839.99
25 : $797.99
50 : $755.99
100 : $722.39

PE7313-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 20 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7313-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7313-20 20 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7313-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $631.99
5 : $606.71
10 : $581.43

PE33132-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Female Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA female cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assembly has male gender on end 1 and female on end 2. PE33132-48 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMA jack cable assembly PE33132-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33132-48 RF cable are available on our downloadable PDF datasheet.PE33132-48 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE33132LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female cable using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable using RG316 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33132LF/HS can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33132LF/HS is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33132LF/HS can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable using RG316 coax with heatshrink, LF solder.

PE33132LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using RG316 Coax, RoHS. PE33132LF is a SMA male right angle to SMA female cable using RG316 coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33132LF SMA male right angle to SMA female cable assembly is constructed with RG316 coax.

PE33132LF/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Female Cable 12 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female cable 12 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 12 inch length using RG316 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33132LF/HS-12 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33132LF/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33132LF/HS-12 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 12 inch length using RG316 coax with heatshrink, LF solder.

1 : $132.99
25 : $126.34
50 : $119.69
100 : $114.37

PE33132-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Female Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA female cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assembly has male gender on end 1 and female on end 2. PE33132-36 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMA jack cable assembly PE33132-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33132-36 RF cable are available on our downloadable PDF datasheet.PE33132-36 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C8313-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to N Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8313-24 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8313-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8313-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8313-24 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3C3132/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable Using Tinned RG405 Coax with HeatShrink. PE3C3132/HS is a SMA female 4 hole flange to SMA female 4 hole flange cable using RG405 Tinned coax. This Pasternack SMA female 4 hole flange to SMA female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 4 hole flange to female SMA 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3132/HS SMA female 4 hole flange to SMA female 4 hole flange cable assembly is constructed with RG405 Tinned coax.

PE3W03132/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. SMA Male to SMB Plug Cable Using RG303 Coax with HeatShrink. PE3W03132/HS is a SMA male to SMB plug cable using RG303 coax. This Pasternack SMA male to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03132/HS SMA male to SMB plug cable assembly is constructed with RG303 coax.

PE33132LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Female Cable 48 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female cable 48 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA female cable 48 inch length using RG316 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE33132LF/HS-48 can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE33132LF/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33132LF/HS-48 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female cable 48 inch length using RG316 coax with heatshrink, LF solder.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

TE Connectivity

63132-3

TE Connectivity

TAB, .250 FASTON,MAG-MATE Magnet Wire Terminal Type: Tab Magnet Wire Size: 30 – 27 AWG Magnet Wire Size: .25 – .36 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .25 in Tab 30 – 27 AWG .25 – .36 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 63132-3 | Internal Number: 63132-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.27
100 : $0.37
10 : $0.45
1 : $0.59

6,392

9-160313-2

TE Connectivity

250 PIDG FASTON REC Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 17 – 13 AWG Wire Size: 1 – 2.5 mm² Wire Size: 1980 – 4914 CMA Receptacle Partially Insulated 17 – 13 AWG 1 – 2.5 mm² | Pidg Faston Receptacle Quick Disconnect | Part Number: 9-160313-2 | Internal Number: 9-160313-2 | Alias Number: 331498-000 | TE Connectivity
RoHS : Compliant

5,000 : $0.86
2,500 : $0.88
1,000 : $0.9
500 : $0.92
250 : $0.94
100 : $0.96
50 : $0.99
25 : $1.01
10 : $1.03
1 : $1.05

4,876

1-178313-2

TE Connectivity

DYNAMIC D3100 HDR V 3P ASSY PdNi & Au PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178313-2 | Internal Number: 1-178313-2 | TE Connectivity
RoHS : Compliant

2,500 : $5.02
1,000 : $5.16
500 : $5.29
250 : $5.43
100 : $5.56
50 : $5.7
25 : $5.84
10 : $5.97
1 : $6.11

2,220

4-338313-2

TE Connectivity

9POS.HD-20 REC.ASSY Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 4-338313-2 | Internal Number: 4-338313-2 | TE Connectivity
RoHS : Compliant

1,000 : $6.58
500 : $6.77
250 : $6.98
100 : $7.21
50 : $7.42
1 : $8.14

1,552

1-338313-2

TE Connectivity

9POS.HD-20 REC.ASSY Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 1-338313-2 | Internal Number: 1-338313-2 | TE Connectivity
RoHS : Compliant

1,000 : $5.48
500 : $5.55
250 : $5.83
50 : $6.48
25 : $6.9
10 : $7.09
1 : $8.19

415

2-338313-2

TE Connectivity

9P.HDP20 REC. ASSY Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 2-338313-2 | Internal Number: 2-338313-2 | TE Connectivity
RoHS : Compliant

1,000 : $5.7
500 : $5.97
250 : $6.27
50 : $7.02
25 : $7.42
10 : $7.92
1 : $9.32

130

5-338313-2

TE Connectivity

9POS.HD-20 REC.ASSY Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 5-338313-2 | Internal Number: 5-338313-2 | TE Connectivity
RoHS : Compliant

1,000 : $5.11
500 : $5.25
250 : $5.42
100 : $5.6
50 : $5.76
1 : $6.32

105

RT8131-32-10M1

TE Connectivity

RT8131-32-10M1 Operating Voltage (Max): 600 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 600 VDC 32 A PCB Terminal PD2 | Part Number: RT8131-32-10M1 | Internal Number: 823786-SF | RT8131-32-10M1 Operating Voltage (Max): 600 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 600 VDC 32 A PCB Terminal PD2 | Part# RT8131-32-10M1
RoHS : Compliant

50 : $190.74
25 : $201.96
10 : $213.18
1 : $224.4

RT8531-32-10M1

TE Connectivity

RT8531-32-10M1 Operating Voltage (Max): 600 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 600 VDC 32 A PCB Terminal PD2 | Part Number: RT8531-32-10M1 | Internal Number: 823795-SF | RT8531-32-10M1 Operating Voltage (Max): 600 VDC Current Rating (Max): 32 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rt Series & Rt Series N: High-Performance Chokes For Demanding Application | 600 VDC 32 A PCB Terminal PD2 | Part# RT8531-32-10M1
RoHS : Compliant

50 : $190.74
25 : $201.96
10 : $213.18
1 : $224.4

T1650063132-000

TE Connectivity

H6B-SGRH-M32 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1650063132-000 | Internal Number: T1650063132-000 | TE Connectivity
RoHS : Compliant

25 : $27.04
10 : $29.12
1 : $31.2

2336313-2

TE Connectivity

QSFP 25GIG 32AWG 1 METER Cable Assembly Type: QSFP to QSFP Number of Positions: 16 Cable Assembly Length: 1 m Cable Assembly Length: 3.28 ft Data Rate: 25 Gb/s QSFP to QSFP 16 1 m 3.28 ft | High Speed I/o Cable Assembly | Part Number: 2336313-2 | Internal Number: 2336313-2 | TE Connectivity
RoHS : Compliant

1,000 : $59.93
500 : $61.63
250 : $63.54
100 : $65.67
50 : $67.58
1 : $74.17

T1250163132-000

TE Connectivity

H16B-TSBS-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250163132-000 | Internal Number: T1250163132-000 | TE Connectivity
RoHS : Compliant

25 : $34.23
10 : $36.86
1 : $39.5

T1660163132-000

TE Connectivity

H16B-SDRH-LB-M32 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1660163132-000 | Internal Number: T1660163132-000 | TE Connectivity
RoHS : Compliant

10 : $39.15
1 : $43.5

2313228-2

TE Connectivity

NanoRF BACKPLANE MODULE, 12 PSN, AL Number of Coaxial Contacts: 12 PCB Mount Orientation: Vertical Body Material: Aluminum Alloy Connector System: Cable-to-Cable Number of Positions: 12 PCB Rf Module | 12 Vertical Aluminum Alloy Cable-to-Cable | Part Number: 2313228-2 | Internal Number: 2313228-2 | TE Connectivity
RoHS : Compliant

1 : $655.35

2313225-1

TE Connectivity

NanoRF, DC, 12 POS, SS Number of Coaxial Contacts: 12 PCB Mount Orientation: Right Angle Body Material: Stainless Steel Connector System: Cable-to-Cable Number of Positions: 12 PCB Rf Module | 12 Right Angle Stainless Steel Cable-to-Cable | Part Number: 2313225-1 | Internal Number: 2313225-1 | TE Connectivity
RoHS : Compliant

1 : $856.24