| Electronic Components Datasheet Search |
|
425-L222-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | TSW-104-25-L-S-RA | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 4 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-104-25-L-S-RA) RoHS : Compliant |
| 30 | |
| QFS-016-04.25-L-D-DP-A-TR | Samtec Inc | - Tape and Reel (Alt: QFS-016-04.25-L-D-DP-A-TR) RoHS : Compliant |
| 0 | ||
| QFS-026-04.25-L-D-RF2-P-TR | Samtec Inc | - Tape and Reel (Alt: QFS-026-04.25-L-D-RF2-P-TR) RoHS : Compliant |
| 0 | ||
| QFS-032-04.25-L-D-DP-A-GP-TR | Samtec Inc | Conn Differential Pair SKT 64 POS 0.635mm Solder ST SMD T/R - Tape and Reel (Alt: QFS-032-04.25-L-D-DP-A-GP-TR) RoHS : Compliant |
| 0 | ||
| QFS-078-04.25-L-D-GP | Samtec Inc | - Trays (Alt: QFS-078-04.25-L-D-GP) RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-A-P | Samtec Inc | - Trays (Alt: QFSS-052-04.25-L-D-A-P) RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-PT8 | Samtec Inc | - Bulk (Alt: QFSS-052-04.25-L-D-PT8) RoHS : Compliant | 0 | |||
| QFSS-078-04.25-L-D-A-TR | Samtec Inc | - Tape and Reel (Alt: QFSS-078-04.25-L-D-A-TR) RoHS : Compliant |
| 0 | ||
| JT07RE-14-15SD(425)(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-38999 Series II, Jam Nut Receptacle, 15 Contacts, Bayonet, Copper Alloy - Bulk (Alt: JT07RE-14-15SD(425)(LC)) RoHS : Not Compliant |
| 0 | ||
| JT07RE-20-16SD(425)(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-38999 Series II, Jam Nut Receptacle, 16 Contacts, Bayonet, Copper Alloy - Bulk (Alt: JT07RE-20-16SD(425)(LC)) RoHS : Not Compliant |
| 0 | ||
| JT07RE-24-2SC(425)(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-38999 Series II, Jam Nut Receptacle, 100 Contacts, Bayonet, Copper Alloy - Bulk (Alt: JT07RE-24-2SC(425)(LC)) RoHS : Not Compliant |
| 0 | ||
| HTSW-204-25-L-Q-RA | Samtec Inc | - Bulk (Alt: HTSW-204-25-L-Q-RA) RoHS : Compliant | 0 | |||
| HTSW-214-25-L-D | Samtec Inc | - Bulk (Alt: HTSW-214-25-L-D) RoHS : Compliant | 0 | |||
| 100P2314-25-L40-C | TE Connectivity | - Bulk (Alt: AAE1599-00) RoHS : Not Compliant | 0 | |||
| QFS-026-04.25-L-D-RF1-P | Samtec Inc | - Bulk (Alt: QFS-026-04.25-L-D-RF1-P) RoHS : Compliant | 0 | |||
![]() Newark | TSW-104-25-L-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 8Way; |Samtec, Inc. TSW-104-25-L-D RoHS : Compliant |
| 1,127 | |
| MTSW-104-22-T-S-425-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTSW-104-22-T-S-425-LL RoHS : Compliant |
| 671 | ||
| TSW-104-25-L-S-LA | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. TSW-104-25-L-S-LA RoHS : Compliant |
| 541 | ||
| TSW-104-25-L-D-RA-003 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 8Pos; |Samtec, Inc. TSW-104-25-L-D-RA-003 RoHS : Compliant |
| 541 | ||
| TSW-204-25-L-S-RA | Samtec Inc | Header, 5.08Mm, Tht, R/A, 4Way; |Samtec, Inc. TSW-204-25-L-S-RA RoHS : Compliant |
| 502 | ||
| TSW-114-25-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 14Way; |Samtec, Inc. TSW-114-25-L-S RoHS : Compliant |
| 400 | ||
| MTSW-112-09-T-S-425-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 12Pos; |Samtec, Inc. MTSW-112-09-T-S-425-LL RoHS : Compliant |
| 393 | ||
| MTSW-114-22-T-S-425-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 14Pos; |Samtec, Inc. MTSW-114-22-T-S-425-LL RoHS : Compliant |
| 335 | ||
| HTSW-104-25-LM-S-RA | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. HTSW-104-25-LM-S-RA RoHS : Compliant |
| 329 | ||
| TSW-114-25-L-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 28Way; |Samtec, Inc. TSW-114-25-L-D RoHS : Compliant |
| 308 | ||
| TSW-124-25-L-D-LA | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 48Pos; |Samtec, Inc. TSW-124-25-L-D-LA RoHS : Compliant |
| 240 | ||
| 202K174-25L-0 | TE Connectivity | Heat-Shrink Boot, Straight Lipped, 60Mm; |Te Connectivity Raychem 202K174-25L-0 RoHS : Compliant |
| 152 | ||
| TSW-214-25-L-S | Samtec Inc | Header, 5.08Mm, Tht Vert, 14Way; |Samtec, Inc. TSW-214-25-L-S RoHS : Compliant |
| 92 | ||
| QFS-026-04.25-L-D-A-P-TR | Samtec Inc | Connector; |Samtec, Inc. QFS-026-04.25-L-D-A-P-TR RoHS : Compliant |
| 89 | ||
| 425-LF | MG Chemicals | Desoldering Braid, 1.5M; |Mg Chemicals 425-LF RoHS : Compliant |
| 69 | ||
![]() RS | KMEB-1-24-2.5-LED (151688) | Festo | PLUG SOCKET WITH CABLE, KMEB SERIES |
| 29 | |
| KMEB-1-24-2,5-LED (151688) | Festo | ANGLED PLUG SOCKET W/CABLE, M2.5 SCREW, 3-PIN, 2.5, SIGNAL LED, KMEB SERIES |
| 23 | ||
| 425-LF | MG Chemicals | DESOLDERING BRAID 1/12 WIDTH, 2.0MM, 5FT, 1.5M, ESD SAFE, LABEL COLOR GREEN |
| 20 | ||
| KME-1-24-2.5-LED (30943) | Festo | PUG SOCKET WITH CABLE, RIGHT ANGLE, 2.5M PVC, KME SERIES |
| 19 | ||
| RA2425LA06 | Carlo Gavazzi Holding AG | SOLID STATE RELAY SCREW PANEL MOUNT, ZERO VARISTOR, 25 A, 90 V AC/DC RoHS : Compliant |
| 16 | ||
| KMEB-3-24-2.5-LED (547268) | Festo | PLUG SOCKET WITH CABLE, KMEB SERIES |
| 6 | ||
| 3RV27425LD10 | Siemens | CIRCUIT BREAKER UL489 60A 3RV2 SERIES |
| 5 | ||
| KMEB-2-24-2,5-LED (174844) | Festo | PLUG SOCKET WITH CABLE, 175301-803, TYPE C, 4 PIN, 24V, 2.5M |
| 1 | ||
| BF-042.5-LS | Bimba Manufacturing Company | CYLINDER, O.L., BLOCK FRONT BFS.R.; 3/4IN BORE; STROKE: 2.5IN; SGL ACT/FN MT WI |
| 0 | ||
| 75915425LF | Amphenol FCi | DUBOX |
| 0 | ||
| 89891425LF | Amphenol FCi | DUBOX |
| 0 | ||
| MS2-M-72-425-L-1CA-A-0AA | Carling Technologies | MS-SERIES CIRCUIT BREAKER |
| 0 | ||
| 4AM5542-5LT10-0FA0 (4AM55425LT100FA0) | Siemens | XFMR, 0.8KVA, PRI 660V, SEC 230V, IP00 ;4AM55425LT100FA0 |
| 0 | ||
| AM1-B0-24-425-L01-C (AM1B024425L01C | AM1-B0-24-425-L01-C | AM1B024425L01C) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| MS1-B-12-425-L-1CB-A-C (MS1B12425L1CBAC | MS1-B-12-425-L-1CB-A-C | MS1B12425L1CB | Carling Technologies | CIRCUIT BREAKER, M-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() Microchip Technology Inc | PIC17C44-25/L![]() | Microchip Technology Inc | MCU CMOS 44 LD 25MHZ 8K EPRM, PLCC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 893 | |
![]() Bisco Industries | MS21209F4-25L | MS Inserts | 9,581 | |||
| MS21209C0425L | MS Inserts | 3,035 | ||||
| MS21209C4-25L | MS Inserts | 396 | ||||
| BACI12AE-F4-25L | Boeing | 47 | ||||
| BACI12AE-F4-25L | HeliCoil | 47 | ||||
![]() Sager | MS1-B-10-425-L-1CB-A-0A-C | Carling Technologies | Circuit Breakers MS1B10425L1CBA0AC |
| 0 | |
| MS2-M-72-425-L-1CA-A-0AA | Carling Technologies | Circuit Breakers MS2M72425L1CAA0AA |
| 0 | ||
| QFS-016-04.25-L-D-DP-A-TR | Samtec Inc | Headers & Wire Housings 0.635 mm Q2 High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFS-026-04.25-L-D-RF2-P-TR | Samtec Inc | Headers & Wire Housings 0.635 mm Q2 High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFS-032-04.25-L-D-DP-A-GP-TR | Samtec Inc | Headers & Wire Housings 0.635 mm Q2 High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFS-078-04.25-L-D-GP | Samtec Inc | Headers & Wire Housings 0.635 mm Q2 High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-016-04.25-L-D-DP-P-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| QFSS-052-04.25-L-D-A-P | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Q2 Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-BM-PT4 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| QFSS-052-04.25-L-D-PT8 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| QFSS-078-04.25-L-D-A-TR | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Q2 Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| HTSW-204-25-L-Q-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-214-25-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| QFS-026-04.25-L-D-PC4-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| QFS-026-04.25-L-D-RF1-P | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | 865635306425LF | Amphenol Corporation | Connector: D-Sub; female; crimped; phosphor bronze; 24AWG÷20AWG |
| 2,874 | |
| 91910-21425LF | Amphenol Corporation | Contact; gold-plated; 1A; PIN: 25; 500V; vertical; H: 6mm; -55÷130°C |
| 1,355 | ||
| 10138654-G04-25LF | Amphenol Corporation | Connector: wire-board; male; PIN: 25; Minitek; Urated: 200V; UL94V-0 |
| 1,000 | ||
| QFS-026-04.25-L-D | Samtec Inc | Connector: PCB to PCB; female; PIN: 52; POWER; vertical; 2.6A; SMT RoHS : Compliant |
| 147 | ||
| QFS-026-04.25-L-D-A-RT1 | Samtec Inc | Connector: PCB to PCB; female; PIN: 52; QFS; straight; 2.6A; 300VAC RoHS : Compliant |
| 60 | ||
| QFS-052-04.25-L-D-A | Samtec Inc | Connector: PCB to PCB; socket; female; PIN: 104; QFS; vertical; SMT RoHS : Compliant |
| 52 | ||
| QFS-104-04.25-L-D-GP | Samtec Inc | Connector: PCB to PCB; POWER; Plating: gold-plated RoHS : Compliant |
| 24 | ||
| QFS-026-04.25-L-D-A | Samtec Inc | Connector: PCB to PCB; socket; female; PIN: 52; QFS; vertical; 2.6A RoHS : Compliant |
| 22 | ||
| QFS-026-04.25-L-D-A-P-TR | Samtec Inc | Connector: PCB to PCB; socket; female; PIN: 52; QFS; vertical; SMT RoHS : Compliant |
| 5 | ||
| 3425L260/60UR | Littelfuse Inc | Fuse: PTC polymer; SMD; 2.6A; 3425L; 3425 RoHS : Compliant |
| 0 | ||
| 3425L200/60MR | Littelfuse Inc | Fuse: PTC polymer; SMD; 2A; 3425L; 3425 RoHS : Compliant |
| 0 | ||
| 3425L260/60UR-A | Littelfuse Inc | Fuse: PTC polymer; SMD; 2.6A; 3425L; 3425 |
| 0 | ||
| 3425L200/60MR-A | Littelfuse Inc | Fuse: PTC polymer; SMD; 2A; 3425L; 3425 |
| 0 | ||
| 52103425LF | Lapp Group | Stopper; M20; 1.5; IP68; brass; nickel; SKINDICHT®; with seal |
| 0 | ||
| HFD42/5-L13SR | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 5VDC; DPDT; 4A; subminiature; SMD |
| 0 | ||
![]() Interstate Connecting Components | 71991-425LF | Amphenol FCi | DUBOX RoHS : Compliant |
| 2 | |
| 865635306425LF | Amphenol FCi | OEM ITEM 569-5L1F-CABLE CONNECTORS |
| 0 | ||
| 91911-31425LF | Amphenol FCi | CONAN HEADER RoHS : Compliant |
| 0 | ||
| 91687-425LF | Amphenol FCi | DUBOX HDR DR TMT VERT-91687-42 | 0 | |||
| 202K174-25L-0 | TE Connectivity | 202K174-25L-0 RoHS : Compliant | 0 | |||
| 10138654-G04-25LF | Amphenol FCi | MINITEK HDR SR TMT STR-UNSHROU | 0 | |||
| 91910-21425LF | Amphenol FCi | CONAN HEADER RoHS : Compliant |
| 0 | ||
| 86303425LF | Amphenol FCi | F LL NEW DSGN 9-37P RoHS : Compliant |
| 0 | ||
| 202K174-25L/225-0 | TE Connectivity | 202K174-25L/225-0 | 0 | |||
| 222K174-25L/225-0 | TE Connectivity | 222K174-25L/225-0 | 0 | |||
| 865635206425LF | Amphenol FCi | 865635206425LF-CONT MALE AWG | 0 | |||
| 71920-425LF | Amphenol FCi | DUBOX RCP SR TMT VERT-HE13 SPR RoHS : Compliant | 0 | |||
| 222K174-25L-0 | TE Connectivity | 222K174-25L-0 | 0 | |||
![]() Powell Electronics | 865635306425LF | Amphenol FCi | Cable Assembly |
| 1,897 | |
| QFS-026-04.25-L-D-A-P-TR | Samtec Inc | 0.635 mm Q2 High-Speed Rugged Ground Pla RoHS : Compliant |
| 1,620 | ||
| TSW-104-25-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 744 | ||
| MTSW-104-22-T-S-425-LL | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 443 | ||
| DW-03-09-G-S-425-LL | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 381 | ||
| TSW-104-25-L-D-RA-003 | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 357 | ||
| TSW-104-25-L-S-LA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 357 | ||
| TSW-204-25-L-S-RA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 331 | ||
| TSW-114-25-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 264 | ||
| MTSW-112-09-T-S-425-LL | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 259 | ||
| MTSW-114-22-T-S-425-LL | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 221 | ||
| HTSW-104-25-LM-S-RA | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 217 | ||
| TSW-114-25-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 203 | ||
| TSW-214-25-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 61 | ||
| QFS-104-04.25-L-D-GP | Samtec Inc | HS MEZZ SOCKET 4POS 2ROW RoHS : Compliant |
| 16 | ||
![]() Richardson RFPD | WHM0425LE | WanTcom | RF & MW LNA RoHS : Compliant |
| 0 | |
| QFSS-064-04.25-L-D-DP-A | Samtec Inc | Conn Micro High Speed Terminal Strip SKT 64 POS 0. RoHS : Compliant |
| 0 | ||
![]() Rutronik | 91687-425LF | Amphenol Communications Solutions | 50P SHROUDED HEADER ST 2 ROWS RoHS : Compliant |
| 32 | |
![]() Avnet Abacus | QFS-052-04.25-L-D-A-P-TR | Samtec Inc | Mezzanine Connector Receptacle 0635 mm 2 Rows 104 Contacts Surface Mount Phosphor Bronze (Alt: QFS-052-04.25-L-D-A-P-TR) RoHS : Compliant | 150 | ||
| QFS-052-04.25-L-D-A | Samtec Inc | Mezzanine Connector Receptacle 0635 mm 2 Rows 104 Contacts Straight Solder Surface Mount (Alt: QFS-052-04.25-L-D-A) RoHS : Compliant | 52 | |||
| QFS-078-04.25-L-D-A-P | Samtec Inc | Conn Micro High Speed Socket Strip SKT 156 POS 0635mm Solder ST SMD (Alt: QFS-078-04.25-L-D-A-P) RoHS : Compliant | 0 | |||
| QFS-078-04.25-L-D-PT8 | Samtec Inc | Conn Micro High Speed Socket Strip SKT 16Power156Signal POS Solder ST ThruHoleSMD (Alt: QFS-078-04.25-L-D-PT8) RoHS : Compliant | 0 | |||
| QFSS-016-04.25-L-D-DP | Samtec Inc | Conn Differential Pair SKT 16 POS 0635mm Solder ST SMD (Alt: QFSS-016-04.25-L-D-DP) RoHS : Compliant | 0 | |||
| QFS-032-04.25-L-D-DP-A | Samtec Inc | (Alt: QFS-032-04.25-L-D-DP-A) RoHS : Compliant | 0 | |||
| QFSS-078-04.25-L-D-A-TR | Samtec Inc | (Alt: QFSS-078-04.25-L-D-A-TR) RoHS : Compliant | 0 | |||
| QFS-078-04.25-L-D-A-GP-P | Samtec Inc | (Alt: QFS-078-04.25-L-D-A-GP-P) RoHS : Compliant | 0 | |||
| QFS-052-04.25-L-D-RF1-TR | Samtec Inc | (Alt: QFS-052-04.25-L-D-RF1-TR) RoHS : Compliant | 0 | |||
| QFS-016-04.25-L-D-DP-A-TR | Samtec Inc | (Alt: QFS-016-04.25-L-D-DP-A-TR) RoHS : Compliant | 0 | |||
| QFS-032-04.25-L-D-DP-A-GP | Samtec Inc | Conn Differential Pair SKT 64 POS 0635mm Solder ST SMD (Alt: QFS-032-04.25-L-D-DP-A-GP) RoHS : Compliant | 0 | |||
| QFSS-032-04.25-L-D-DP-A-P | Samtec Inc | Conn Differential Pair SKT 32 POS 0635mm Solder ST SMD (Alt: QFSS-032-04.25-L-D-DP-A-P) RoHS : Compliant | 0 | |||
| QFSS-032-04.25-L-D-DP-PT8 | Samtec Inc | (Alt: QFSS-032-04.25-L-D-DP-PT8) RoHS : Compliant | 0 | |||
| QFS-032-04.25-L-D-DP-A-P-TR | Samtec Inc | Conn Differential Pair SKT 64 POS 0635mm Solder ST SMD TR (Alt: QFS-032-04.25-L-D-DP-A-P-TR) RoHS : Compliant | 0 | |||
| QFS-032-04.25-L-D-DP-A-GP-TR | Samtec Inc | Conn Differential Pair SKT 64 POS 0635mm Solder ST SMD TR (Alt: QFS-032-04.25-L-D-DP-A-GP-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 91911-31425LF | Amphenol Corporation | Conn Board to Board HDR 25 POS 1mm Solder ST SMD T/R (Alt: 91911-31425LF) RoHS : Compliant | 0 | ||
| 51940-425LF | Amphenol Corporation | (Alt: 51940-425LF) RoHS : Compliant | 0 | |||
| QFS-026-04.25-L-D-PC4 | Samtec Inc | (Alt: QFS-026-04.25-L-D-PC4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PIC17C44-25/L![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 44Pin PLCC Tube (Alt: PIC17C44-25/L) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | BS14A-H24/2.5L | Nipron Co | NiMH battery |
| 0 | |
| DS02A-L24/2.5L-B | Nipron Co |
| 0 | |||
| BS06A-H24/2.5L | Nipron Co | NiMH battery |
| 0 | ||
| BS06B-H24/2.5L | Nipron Co | NiMH battery |
| 0 | ||
![]() Component Electronics, Inc | RX25VB471M12.5X42.5LL | Chemi-Con | IN STOCK SHIP TODAY | 5,000 | ||
| RX25VB471M12.5X42.5LL | United Chemi-Con Inc | IN STOCK SHIP TODAY | 4,546 | |||
![]() EBV Elektronik | PIC17C44-25/L![]() | Microchip Technology Inc | MCU 8bit PIC17 PIC RISC 16KB EPROM 5V 44Pin PLCC Tube (Alt: PIC17C44-25/L) RoHS : Compliant | 0 | ||
![]() FDH Electronics | LM-71727-080425-LARGE | ELECTRO ENTERPRISES INC | Identification | 7 | ||
| 202K174-25L-0 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| 222K174-25L-0 | TE Connectivity | Harness Mgmt | 0 | |||
![]() Master Electronics | MS2-M-72-425-L-1CA-A-0AA | Carling Technologies | MS2M72425L1CAA0AA RoHS : Compliant |
| 0 | |
| QFS-016-04.25-L-D-DP-A-TR | Samtec Inc | 0.635 mm Q2™ High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFS-016-04.25-L-D-DP-PC8-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| QFS-026-04.25-L-D-PC8-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| QFS-026-04.25-L-D-RF2-P-TR | Samtec Inc | 0.635 mm Q2™ High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFS-078-04.25-L-D-GP | Samtec Inc | 0.635 mm Q2™ High-Speed Rugged Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-016-04.25-L-D-DP-P-TR | Samtec Inc | 0.635 mm Q2™ Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-A-P | Samtec Inc | 0.635 mm Q2™ Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-BM-PT4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| QFSS-052-04.25-L-D-PT8 | Samtec Inc | 0.635 mm Q2™ Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| QFSS-078-04.25-L-D-A-TR | Samtec Inc | 0.635 mm Q2™ Shielded Ground Plane Socket Strip RoHS : Compliant |
| 0 | ||
| TSW-104-25-L-D-RA-002 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-204-25-L-Q-RA | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-214-25-L-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-214-25-L-D-LA | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 425-LF | MG Chemicals | Desoldering braid 1/12 width, 2.0mm, 5ft, 1.5m, ESD Safe, label color Green |
| 50 | |
![]() Pasternack Enterprises US | PE34425LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MHV Male to MHV Male Cable 12 Inch Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly MHV male to MHV male cable 12 inch length using RG400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV male to MHV male cable 12 inch length using RG400 coax with heatshrink, LF solder, MHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a male gender on end 1 and male on end 2. PE34425LF/HS-12 can also be known as a MHV plug to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV plug to MHV plug cable assembly PE34425LF/HS-12 is built with RG400 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency MHV male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to MHV male cable 12 inch length using RG400 coax with heatshrink, LF solder. |
| 2,368 | |
| PE34425LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MHV Male to MHV Male Cable 36 Inch Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly MHV male to MHV male cable 36 inch length using RG400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV male to MHV male cable 36 inch length using RG400 coax with heatshrink, LF solder, MHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a male gender on end 1 and male on end 2. PE34425LF/HS-36 can also be known as a MHV plug to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV plug to MHV plug cable assembly PE34425LF/HS-36 is built with RG400 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency MHV male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to MHV male cable 36 inch length using RG400 coax with heatshrink, LF solder. |
| 1,776 | ||
| PE33425LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm BNC Male to 75 Ohm BNC Female Bulkhead Cable 48 Inch Length Using 75 Ohm PE-B150 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm PE-B150 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm PE-B150 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE33425LF-48, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE33425LF-48 is built with PE-B150 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33425LF-48 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm PE-B150 coax. |
| 174 | ||
| PE33425LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Female Bulkhead Cable 36 Inch Length Using 75 Ohm PE-B150 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 36 inch length using 75 Ohm PE-B150 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 36 inch length using 75 Ohm PE-B150 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE33425LF-36, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE33425LF-36 is built with PE-B150 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33425LF-36 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 36 inch length using 75 Ohm PE-B150 coax. |
| 174 | ||
| PE33425LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Female Bulkhead Cable 60 Inch Length Using 75 Ohm PE-B150 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm PE-B150 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm PE-B150 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE33425LF-60, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE33425LF-60 is built with PE-B150 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33425LF-60 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC female bulkhead cable 60 inch length using 75 Ohm PE-B150 coax. |
| 174 | ||
| PE3C4425LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMC Plug Right Angle to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax, LF Solder., Radio frequency assembly SSMC plug right angle to SMA male right angle low loss cable using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMC plug right angle to SMA male right angle low loss cable using LMR-100 coax, LF solder, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SSMC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SSMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C4425LF can also be known as a low loss right angle SSMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SSMC male to SMA plug cable assembly PE3C4425LF is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SSMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4425LF can also be used in the other direction and will be right angle SMA male to right angle SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMA cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SMA male right angle low loss cable using LMR-100 coax, LF solder. | 0 | |||
| PE3C3425LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to BNC Male Cable 12 Inch Length Using RG174 Coax, LF Solder, RoHS., Radio frequency assembly SMC plug to BNC male cable 12 inch length using RG174 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 12 inch length using RG174 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3C3425LF-12, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3C3425LF-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3425LF-12 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 12 inch length using RG174 coax, LF solder, RoHS. |
| 0 | ||
| PE3C4425LF-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMC Plug Right Angle to SMA Male Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SSMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SSMC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SSMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C4425LF-200CM can also be known as a low loss right angle SSMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SSMC male to SMA plug cable assembly PE3C4425LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SSMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4425LF-200CM can also be used in the other direction and will be right angle SMA male to right angle SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMA cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SMA male right angle low loss cable 200 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3C5425LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug Right Angle to BNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3C5425LF/HS is a 1.0/2.3 plug right angle to BNC male cable using RG58 coax. This Pasternack 1.0/2.3 plug right angle to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. 1.0/2.3 right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug 1.0/2.3 right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5425LF/HS 1.0/2.3 plug right angle to BNC male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C3425LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMC Plug to BNC Male Cable 24 Inch Length Using RG174 Coax, LF Solder, RoHS., Radio frequency assembly SMC plug to BNC male cable 24 inch length using RG174 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 24 inch length using RG174 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3C3425LF-24, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3C3425LF-24 is built with RG174 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3425LF-24 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 24 inch length using RG174 coax, LF solder, RoHS. |
| 0 | ||
| PE3C3425LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMC Plug to BNC Male Cable 60 Inch Length Using RG174 Coax, LF Solder, RoHS., Radio frequency assembly SMC plug to BNC male cable 60 inch length using RG174 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 60 inch length using RG174 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3C3425LF-60, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3C3425LF-60 is built with RG174 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3425LF-60 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 60 inch length using RG174 coax, LF solder, RoHS. |
| 0 | ||
| PE3C4425LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMC Plug Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SSMC plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMC plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax, LF solder, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SSMC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SSMC to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C4425LF-36 can also be known as a low loss right angle SSMC male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SSMC male to SMA plug cable assembly PE3C4425LF-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SSMC right angle plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4425LF-36 can also be used in the other direction and will be right angle SMA male to right angle SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC right angle male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMA cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SMA male right angle low loss cable 36 inch length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3C3425LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMC Plug to BNC Male Cable 36 Inch Length Using RG174 Coax, LF Solder, RoHS., Radio frequency assembly SMC plug to BNC male cable 36 inch length using RG174 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 36 inch length using RG174 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3C3425LF-36, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3C3425LF-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3425LF-36 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 36 inch length using RG174 coax, LF solder, RoHS. |
| 0 | ||
| PE3W11425LF | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Plug to FAKRA Plug Cable Using RG174 Coax, LF Solder. PE3W11425LF is a FAKRA plug to FAKRA plug cable using RG174 coax. This Pasternack FAKRA plug to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our plug FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11425LF FAKRA plug to FAKRA plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3425LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Male to TNC Male Cable 36 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly TNC male to TNC male cable 36 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 36 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3425LF-36, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3425LF-36 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 36 inch length using RG174 coax, RoHS. |
| 0 | ||
![]() TE Connectivity | 202K174-25L-0 | TE Connectivity | 202K174-25L-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 202 25 | Part Number: 202K174-25L-0 | Internal Number: CV7364-000 | TE Connectivity RoHS : Compliant |
| 200 | |
![]() Vyrian | A3425LK-T | Allegro MicroSystems | Analog Circuit, 1 Func, BICMOS, PSIP4 | 15,033 | ||
| HMC425LP3TR | Analog Devices Inc | Variable Attenuator, 2200MHz Min, 8000MHz Max, 4.3dB Insertion Loss-Max, GAAS RoHS : Not Compliant | 10,692 | |||
| TSW-104-25-L-D | Samtec Inc | Board Connector, 8 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator RoHS : Compliant | 8,710 | |||
| 105408-HMC425LP3 | Analog Devices Inc | 8,199 | ||||
| 202K174-25L-0 | TE Connectivity | Connector Accessory, 0.618in Min Cable Dia, 1.378in Max Cable Dia, Elastomer RoHS : Compliant | 7,721 | |||
| HMC425LP3 | Analog Devices Inc | Variable Attenuator, 2200MHz Min, 8000MHz Max, 4.3dB Insertion Loss-Max, GAAS RoHS : Not Compliant | 6,412 | |||
MT5C2564-25L![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 5,667 | |||
MT5C1604-25LIT![]() | Micron Technology Inc | Standard SRAM, 4KX4, 25ns, CMOS, PDIP20 RoHS : Not Compliant | 5,309 | |||
| DS1425L-F5 | Maxim Integrated Products | 5,279 | ||||
MT5LC2564-25LPAT![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 4,449 | |||
MT5LC2564-25LPIT![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 3,999 | |||
MT5C2564-25LIT![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 2,956 | |||
MT5LC2564-25L![]() | Micron Technology Inc | Standard SRAM, 64KX4, 25ns, CMOS, PDIP24 RoHS : Not Compliant | 2,467 | |||
MT5C1604-25L![]() | Micron Technology Inc | Standard SRAM, 4KX4, 25ns, CMOS, PDIP20 RoHS : Not Compliant | 2,335 | |||
| QFS-078-04.25-L-D-A-GP-P | Samtec Inc | Board Stacking Connector, 156 Contact(s), 2 Row(s), Female, Straight, 0.025 inch Pitch, Surface Mount Terminal, Hole .14, Black Insulator, Socket RoHS : Compliant | 869 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |