| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Braemac Americas-Symmetry | KIT-24441
| SparkFun Electronics | SparkFun XBee Kit | | 1
 |
AX7DAF1-644.1628T
 | Abracon Corporation | XTAL OSC XO 644.1628MHZ LVDS SMD
RoHS : Compliant | | 0
|
ASG-P-X-A-1.24416GHZ-T
 | Abracon Corporation | XTAL OSC XO 1.24416GHZ LVPECL
RoHS : Compliant | | 0
|
AX7DAF1-1244.1600T
| Abracon Corporation | XTAL OSC XO 1.24416GHZ LVDS SMD
RoHS : Compliant | | 0
|
AX7DAF2-1244.1600T
| Abracon Corporation | XTAL OSC XO 1.24416GHZ LVDS SMD
RoHS : Compliant | | 0
|
XG29-RB4413A
| Silicon Laboratories Inc | EFR32xG29 +6 dBm Radio Board Kit (Boost) | | 0
|
XG29-RB4412A
| Silicon Laboratories Inc | EFR32xG29 +8 dBm Radio Board Kit (Buck) | | 0
|
XG22-RB4415A
| Silicon Laboratories Inc | EFR32xG22E 2.4 GHz +6 dBm Radio Board (QFN40) | | 0
|
ECCO | 0441001414P1000101
| Amphenol Sine Systems | | | 3,000
|
044-1005-000-MS
| ITT Interconnect Solutions | | | 1,212
|
044-1009-000
| ITT Interconnect Solutions | | | 1,060
|
044-1004-000-MS
| ITT Interconnect Solutions | | | 615
|
044-1001-000-MS
| ITT Interconnect Solutions | | | 441
|
044-1008-000
| ITT Interconnect Solutions | | | 338
|
044-1002-000-MS
| ITT Interconnect Solutions | | | 321
|
044-1006-000-MS
| ITT Interconnect Solutions | | | 137
|
044-1008-000-MS
| ITT Interconnect Solutions | | | 100
|
044-1007-000-MS
| ITT Interconnect Solutions | | | 100
|
04410310006
| Amphenol Tuchel | | | 100
|
044-1007-000
| ITT Interconnect Solutions | | | 34
|
044-1001-000
| ITT Interconnect Solutions | | | 24
|
04410310005
| Amphenol Tuchel | | | 13
|
04410310003
| Amphenol Tuchel | | | 2
|
Pasternack Enterprises US | PE44137
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: .042 inch End Launch. SMB Jack Connector Solder Attachment .042 inch End Launch PCB, .020 inch x .010 inch Contact. PE44137 SMB jack pcb connector has an interface type of .042 inch end launch and a 50 Ohm impedance. Pasternack SMB jack connector uses shield/contact solder as an attachment method. Our jack SMB pcb connector provides a minimum frequency of DC and a maximum frequency of 4 GHz. The Pasternack SMB jack pcb connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack SMB pcb connector has a brass body with gold plating. Our PE44137 SMB connector uses beryllium copper contact. This SMB jack pcb RF connector is RoHS and REACH compliant. This Pasternack jack SMB connector will ship the same day as purchased. Our SMB jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMB connector cable assemblies that will ship the same day as well. | 1 : $39.59
25 : $37.61
50 : $35.63
100 : $34.05
|
| 1,263
|
PE3C4441-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. SSMC Plug to SSMC Plug Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SSMC plug to SSMC plug cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to SSMC plug cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and SSMC cable connection on the other. Our SSMC to SSMC cable assemblies have a plug gender on end 1 and plug on end 2. This SSMC to SSMC cable is a plug to plug coax assembly, PE3C4441-36, can also be known as a SSMC male to SSMC male cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC male cable assembly PE3C4441-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SSMC cable assembly is manufactured with SSMC to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SSMC plug to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMC male to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SSMC plug cable 36 inch length using PE-SR405FLJ coax. | 1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31
|
| 215
|
PE34412LF-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to TNC Male Cable 48 Inch Length Using PE-SR047FL Coax, RoHS., Radio frequency assembly SMA male to TNC male cable 48 inch length using PE-SR047FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 48 inch length using PE-SR047FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE34412LF-48, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE34412LF-48 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34412LF-48 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 48 inch length using PE-SR047FL coax, RoHS. | 1 : $160.99
25 : $152.94
50 : $144.89
|
| 177
|
PE44182
| Pasternack Enterprises | Key Specifications, Polarity: Reverse Thread, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: RG55, Interface Type 2: RG141, Interface Type 3: RG142, Interface Type 4: RG223, Interface Type 5: RG400. RT SMA Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400. PE44182 reverse thread SMA male coaxial connector has an interface type of RG55, RG141, RG142, RG223, RG400 and a 50 Ohm impedance. Pasternack reverse thread SMA male connector uses shield/contact crimp/solder as an attachment method. The Pasternack reverse thread SMA male coaxial connector has a PTFE dielectric type. The Pasternack SMA coaxial connector has a brass body with nickel plating. Our PE44182 reverse thread SMA connector uses brass contact. This reverse thread SMA male coaxial RF connector is RoHS and REACH compliant. This Pasternack reverse thread male SMA connector will ship the same day as purchased. Our SMA reverse thread male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. | 1 : $40.49
25 : $38.47
50 : $36.44
100 : $34.82
|
| 118
|
PE3C10444-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 1.85mm Female Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm male to 1.85mm female cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm female cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10444-12 can also be known as a 1.85mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. Our 1.85mm male to 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm plug to 1.85mm jack cable assembly PE3C10444-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10444-12 can also be used in the other direction and will be a 1.85mm female to 1.85mm male cable assembly if the opposite connectivity is required. 1.85mm plug to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. | 1 : $306.99
10 : $300.85
25 : $294.71
100 : $288.57
|
| 0
|
PE3C4414-18
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to SSMC Plug Right Angle Cable 18 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to SSMC plug right angle cable 18 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SSMC plug right angle cable 18 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle SSMC cable connection on the other. Our BNC to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This BNC to SSMC cable is a male to plug coax assembly, PE3C4414-18, can also be known as a BNC plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. BNC plug to SSMC male cable assembly PE3C4414-18 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BNC male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4414-18 can also be used in the other direction and will be right angle SSMC plug to BNC male cable assembly if the opposite connectivity is required. BNC plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SSMC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SSMC plug right angle cable 18 inch length using RG316 coax. | 1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85
|
| 0
|
PE3C4417-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. SSMC Plug to TNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SSMC plug to TNC male cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to TNC male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4417-24, can also be known as a SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4417-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4417-24 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male cable 24 inch length using RG316 coax. | 1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31
|
| 0
|
PE44100
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: MHV, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: RG55, Interface Type 2: RG141, Interface Type 3: RG142, Interface Type 4: RG223, Interface Type 5: RG400. MHV Female Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400. PE44100 MHV female coaxial connector has an interface type of RG55, RG141, RG142, RG223, RG400 and a 50 Ohm impedance. Pasternack MHV female connector uses shield/contact crimp/solder as an attachment method. The Pasternack MHV coaxial connector has a brass body with nickel plating. This MHV female coaxial RF connector is REACH compliant. This Pasternack female MHV connector will ship the same day as purchased. Our MHV female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MHV connector cable assemblies that will ship the same day as well. | 1 : $50.79
25 : $48.25
50 : $45.71
100 : $43.68
|
| 0
|
PE344-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Female Bulkhead Low Loss Test Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to N female bulkhead low loss test cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead low loss test cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss test N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE344-12, can also be known as a low loss test type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE344-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE344-12 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss test type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss test cable 12 inch length using PE-P142LL coax, RoHS. | 1 : $346.99
25 : $329.64
50 : $312.29
|
| 0
|
PE34410-6
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to TNC Male Cable 6 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male to TNC male cable 6 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 6 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE34410-6, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE34410-6 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34410-6 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 6 inch length using PE-SR047AL coax. | 1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65
|
| 0
|
PE34410-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to TNC Male Cable 60 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male to TNC male cable 60 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 60 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE34410-60, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE34410-60 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34410-60 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 60 inch length using PE-SR047AL coax. | 1 : $186.99
25 : $177.64
50 : $168.29
|
| 0
|
PE34411LF-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 12 inches. MHV Male to SHV Plug Cable 12 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly MHV male to SHV plug cable 12 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 12 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE34411LF-12, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE34411LF-12 is built with RG223 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34411LF-12 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 12 inch length using RG223 coax, RoHS. | 1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5
|
| 0
|
PE34417
| Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50. MHV Male to SHV Plug Cable Using RG316 Coax. PE34417 is a MHV male to SHV plug cable using RG316 coax. This Pasternack MHV male to SHV plug cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm SHV for connector 2. Our male MHV to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34417 MHV male to SHV plug cable assembly is constructed with RG316 coax. | | 0
|
PE34417-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. MHV Male to SHV Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MHV male to SHV plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE34417-36, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE34417-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34417-36 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 36 inch length using RG316 coax. | 1 : $109.99
25 : $104.49
50 : $98.99
|
| 0
|
PE3441LF-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly N male to N male cable 60 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 60 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3441LF-60, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3441LF-60 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using RG58 coax, RoHS. | 1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31
|
| 0
|
Venkel Ltd. | UPTF0402-16W-P-3441DT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;3.44K;�0.5%
RoHS : Compliant | | 0
|
UPTF0603-16W-N-2441BT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.44K;�0.1%
RoHS : Compliant | | 0
|
UPTF1206-8W-P-2441DT
| VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;2.44K;�0.5%
RoHS : Compliant | | 0
|
UPTF2512-2W-N-3441DT
| VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;3.44K;�0.5%
RoHS : Compliant | | 0
|
UPTF0402-16W-N-2441UT
| VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;2.44K;�0.01%
RoHS : Compliant | | 0
|
UPTF0603-16W-P-3441BT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;3.44K;�0.1%
RoHS : Compliant | | 0
|
UPTF0805-10W-P-2441AT-1K
| VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;2.44K;�0.05%
RoHS : Compliant | | 0
|
TFCR0603-10W-K-3441BT
| VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;3.44K;�0.1%
RoHS : Compliant | | 0
|
TFCR0805-10W-C-3441CT-1K
| VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;3.44K;�0.25%
RoHS : Compliant | | 0
|
TFCR1206-4W-C-3441DT-1K
| VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;3.44K;�0.5%
RoHS : Compliant | | 0
|
TFCR1206-8W-C-2441DT
| VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;2.44K;�0.5%
RoHS : Compliant | | 0
|
TFCR1210-4W-C-3441BT
| VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;3.44K;�0.1%
RoHS : Compliant | | 0
|
TFCR1210-4W-K-2441BT-1K
| VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;2.44K;�0.1%
RoHS : Compliant | | 0
|
TFCR2010-4W-C-2441BT
| VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;2.44K;�0.1%
RoHS : Compliant | | 0
|
TFCR2010-4W-C-3441DT-1K
| VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;3.44K;�0.5%
RoHS : Compliant | | 0
|
Vyrian | 17441441205
| Harting Electronics & Kg | Board Connector, 144 Contact(s), 6 Row(s), Male, Straight, Press Fit Terminal | | 15,799
 |
NTHS5441T1G
| onsemi | Small Signal Field-Effect Transistor, 3.9A I(D), 20V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET
RoHS : Compliant | | 10,613
|
V441HG34
| Littelfuse Inc | Varistor, 587V, 620J, Chassis Mount
RoHS : Compliant | | 9,579
|
SMJ4416-20JDE
 | Texas Instruments | Page Mode DRAM, 16KX4, 200ns, NMOS, CDIP18
RoHS : Not Compliant | | 9,384
|
SMJ44100-15JDM
| Texas Instruments | Fast Page DRAM, 4MX1, 150ns, CMOS, CDIP18 | | 8,700
|
5962-01-154-4419
| Texas Instruments | Jbar-Kbar Flip-Flop, 2-Func, Positive Edge Triggered, TTL, CDIP14
RoHS : Not Compliant | | 7,917
|
MT28C64416W30AFW-F705P70KTWT
 | Micron Technology Inc | Memory Circuit, Flash+SRAM, 4MX16, CMOS, PBGA77
RoHS : Not Compliant | | 6,845
|
2-1564412-1
| TE Connectivity | Combination Line Connector, 18 Contact(s), Male
RoHS : Compliant | | 6,842
|
109712-HMC441LC3B
| Analog Devices Inc | | | 6,529
|
MT28C64416W18AFW-F70P70BWT
| Micron Technology Inc | Memory Circuit, Flash+SRAM, 4MX16, CMOS, PBGA77
RoHS : Not Compliant | | 6,488
|
1544169-3
| TE Connectivity | Connector Sub-assemblies
RoHS : Compliant | | 5,796
|
MT28C64416W18ABW-F70P85BWT
| Micron Technology Inc | Memory Circuit, Flash+SRAM, 4MX16, CMOS, PBGA77
RoHS : Compliant | | 5,009
|
MT28C64416W18ABW-F706P70BWT
| Micron Technology Inc | Memory Circuit, Flash+SRAM, 4MX16, CMOS, PBGA77
RoHS : Compliant | | 4,247
|
MT28C64416W30AFW-F70P85BWT
| Micron Technology Inc | Memory Circuit, Flash+SRAM, 4MX16, CMOS, PBGA77
RoHS : Not Compliant | | 3,839
|
XC95144-10PQ100C
 | AMD Xilinx | Flash PLD, 10ns, 144-Cell, CMOS, PQFP100
RoHS : Not Compliant | | 3,638
|
Waytek, Inc. | 1441B1015-0
| Unified Wire and Cable Inc | 14GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.3564
500 : $0.2766
1,000 : $0.2265
1,500 : $0.211
5,000 : $0.1904
|
| 42,450
|
1441T1015-9
| Unified Wire and Cable Inc | 14GA White MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.383
500 : $0.3125
1,000 : $0.2641
1,500 : $0.2281
5,000 : $0.2046
|
| 23,750
|
1441T1015-5
| Unified Wire and Cable Inc | 14GA Green MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.383
500 : $0.3125
1,000 : $0.2641
1,500 : $0.2281
5,000 : $0.2046
|
| 22,750
|
1441T1015-2
| Unified Wire and Cable Inc | 14GA Red MTW/AWM Wire Tinned Wire 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.383
500 : $0.3125
1,000 : $0.2641
1,500 : $0.2281
5,000 : $0.2046
|
| 22,000
|
1441T1015-3
| Unified Wire and Cable Inc | 14GA Orange MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.383
500 : $0.3125
1,000 : $0.2641
1,500 : $0.2281
5,000 : $0.2046
|
| 14,000
|
1441T1015-1
| Unified Wire and Cable Inc | 14GA Brown MTW/AWM Wire Tinned Copper 600V, 1000V UL 1015/1230/1032 CSA TEW | 250 : $0.383
500 : $0.3125
1,000 : $0.2641
1,500 : $0.2281
5,000 : $0.2046
|
| 9,000
|
7114-4151-02
| Yazaki Corp | 18-16 GA Yazaki 2.8 Male Terminal Loose | 20 : $0.1887
10 : $0.1717
50 : $0.1567
100 : $0.15
200 : $0.1453
500 : $0.1387
|
| 5,289
|
7114-4153-02
| Yazaki Corp | 12-10 GA Yazaki 2.8 Male Terminal Reel | 2,500 : $0.3127
12,500 : $0.3054
|
| 5,000
|
7114-4151-02
| Yazaki Corp | 18-16 GA Yazaki 2.8 Male Terminal Reel | 4,000 : $0.1164
20,000 : $0.1065
|
| 4,000
|
7114-4142-02
| Yazaki Corp | 12 GA Yazaki 6.3 Male Terminal Reel 1750/Reel | 1,750 : $0.2241
7,500 : $0.2106
|
| 3,500
|
7114-4152-02
| Yazaki Corp | 14 GA Yazaki 2.8 Male Terminal Reel | 3,000 : $0.123
15,000 : $0.1198
|
| 3,000
|
12048441
| Aptiv PLC | Metri-Pack 480 Cable Seal 12048441 changed to 15324988 18-16GA White | 100 : $0.0493
200 : $0.0457
500 : $0.0416
1,000 : $0.0385
5,000 : $0.0366
|
| 2,551
|
7114-4153-02
| Yazaki Corp | 12-10 GA Yazaki 2.8 Male Terminal Loose | 10 : $0.91
50 : $0.8206
100 : $0.7233
200 : $0.6759
500 : $0.6312
1,000 : $0.5918
|
| 1,846
|
963244-1
| TE Connectivity | TE Power Timer White Cable Seal 2.2-3.0 mm2 20-18ga
RoHS : Compliant | 20 : $0.157
50 : $0.1459
100 : $0.1365
200 : $0.1339
500 : $0.1305
1,000 : $0.1271
|
| 1,561
|
7114-4142-02
| Yazaki Corp | 12 GA Yazaki 6.3 Male Terminal Loose | 6 : $0.249
50 : $0.2396
100 : $0.2318
200 : $0.2194
500 : $0.2116
1,000 : $0.2054
|
| 1,364
|
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British