Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  



513-R12K Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Chip-Germany GmbH
165130.23 M16/12.P

Entmer
18
93.51.3.240

FINDER SpA
4
PSA513-500/5A-KL1-10VA

Mirmer
3
PCF0805-13-1K8

TT Electronics Welwyn Components
2
L3 DISPLAY-UNIT 935-1312

Breimer-Roth Tranformatoren
1
6ES7151-3AA23-0AB0

Siemens
RoHS : Compliant
1

ECCO
97-79-513-6

Amphenol Industrial Operations
25 : $1.436
3,032
97-79-513-6

Amphenol Industrial Operations
25 : $1.436
3,032
97-79-513-12

Amphenol Industrial Operations
25 : $1.42
727
M10-570735-137

Amphenol Aerospace
10 : $3.53
294
97-79-513-8

Amphenol Industrial Operations
25 : $1.38
11
M22520/5-13

Astro Tool Corp
1 : $180.76
2

Pasternack Enterprises US
PE33451-36

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Female to 75 Ohm BNC Female Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female to 75 Ohm BNC female cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female to 75 Ohm BNC female cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE33451-36, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE33451-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female to 75 Ohm BNC female cable 36 inch length using 75 Ohm RG179 coax.
1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6
899
PE5131

Pasternack Enterprises Key Specifications. Connector Series SMA Connector Gender Female Impedance 50 Ohm Attachment Method Crimp Mount Method None Minimum Frequency DC Maximum Frequency 6 GHz Interface Type 1 LMR240 Interface Type 2 RG8X Interface Type 3 PE-C240 Interface Type 4 TCOM-240-FR Interface Type 5 LMR-240-UF Interface Type 6 LMR-240-DB Interface Type 7 TCOM-240 Interface Type 8 LMR-240-FR Interface Type 9 LMR-LW240. SMA Female Connector Crimp Attachment for LMR240, RG8X, PE-C240, TCOM-240-FR, LMR-240-UF, LMR-240-DB, TCOM-240, LMR-240-FR, LMR-LW240. PE5131 SMA female coaxial connector has an interface type of SMA female which is compatible with LMR240, RG8X, PE-C240, TCOM-240-FR, LMR-240-UF, LMR-240-DB, TCOM-240, LMR-240-FR and LMR-LW240 has an impedance of 50 Ohm. Pasternack’s SMA female connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 6 GHz. This SMA female RF connector is stocked to be readily available for same business day shipment. The Pasternack SMA female coaxial connector has a PTFE dielectric type and a VSWR of 1.25:1. Pasternack’s SMA coaxial connector has a brass body with tri-metal plating. Our PE5131 SMA connector uses gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The PE5131 SMA connector operates at a temperature range of -40 to 155 deg C. This SMA connector has a gold inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. Our SMA female connector has a length of 0.98 inches, a width of 0.35 inches and a weight of 0.0097 lbs. This Pasternack female SMA connector will ship the same business day as purchased. Our SMA female connector is part of over one million RF, microwave and millimeter wave components in stock for local, domestic and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. *LMR™ is a Trademark of Times Microwave.
1 : $38.79
25 : $36.85
50 : $34.91
100 : $33.36
58
PE5130

Pasternack Enterprises Key Specifications. Connector Series SMA Connector Gender Female Impedance 50 Ohm Attachment Method Crimp Mount Method None Minimum Frequency DC Maximum Frequency 6 GHz Interface Type 1 LMR-195 Interface Type 2 RG303 Interface Type 3 RG58 Interface Type 4 RG141 Interface Type 5 PE-C195 Interface Type 6 PE-P195 Interface Type 7 RG58-TPX Interface Type 8 LMR-LW195 Interface Type 9 RG303HV Interface Type 10 TCOM-195. SMA Female Connector Crimp Attachment for LMR-195, RG303, RG58, RG141, PE-C195, PE-P195, RG58-TPX, LMR-LW195, RG303HV, TCOM-195. PE5130 SMA female coaxial connector has an interface type of SMA female which is compatible with LMR-195, RG303, RG58, RG141, PE-C195, PE-P195, RG58-TPX, LMR-LW195, RG303HV and TCOM-195 has an impedance of 50 Ohm. Pasternack’s SMA female connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 6 GHz. This SMA female RF connector is stocked to be readily available for same business day shipment. The Pasternack SMA female coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with tri-metal plating. Our PE5130 SMA connector uses gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The PE5130 SMA connector operates at a temperature range of -40 to 155 deg C. This SMA connector has a gold inner contact plating. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.91 inches, a width of 0.36 inches and a weight of 0.0076 lbs. This Pasternack female SMA connector will ship the same business day as purchased. Our SMA female connector is part of over one million RF, microwave and millimeter wave components in stock for local, domestic and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. *LMR™ is a Trademark of Times Microwave.
1 : $30.19
25 : $28.68
50 : $27.17
100 : $25.96
38
PE3C5133/HS-48

Pasternack Enterprises Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to 7/16 DIN Male Low Loss Cable 48 Inch Length Using LMR-600 Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male right angle to 7/16 DIN male low loss cable 48 inch length using LMR-600 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to 7/16 DIN male low loss cable 48 inch length using LMR-600 coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss right angle N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C5133/HS-48 can also be known as a low loss right angle type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE3C5133/HS-48 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N right angle male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5133/HS-48 can also be used in the other direction and will be 7/16 DIN male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to 7/16 DIN male low loss cable 48 inch length using LMR-600 coax with Times Microwave components with heatshrink.
1 : $194.99
25 : $185.24
50 : $175.49
100 : $167.69
5
PE7451-3

Pasternack Enterprises Key Specifications. Design Fixed Maximum Frequency 6 GHz Impedance 50 Ohm Power Maximum 2 Watt VSWR Maximum 1.3:1 Attenuation 3 dB Connector Series 1 4.3-10 Connector Gender 1 Male Connector Series 2 4.3-10 Connector Gender 2 Female Body Material Brass Body Plating Nickel. 3 dB Fixed Attenuator, 4.3-10 Male to 4.3-10 Female Rated to 2 Watts Up to 6 GHz. PE7451-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line resistive pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 4.3-10 attenuator has a male gender on side 1 and a 4.3-10 female connector on side 2. The Pasternack PE7451-3 3 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7451-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57
2
PE3W09513-12

Pasternack Enterprises Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female to SMA Male Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMP female to SMA male cable 12 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 12 inch length using PE-SR405FL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W09513-12 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W09513-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09513-12 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male cable 12 inch length using PE-SR405FL coax.
1 : $166.99
25 : $158.64
50 : $150.29
100 : $143.61
0
PE3W16513

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using LMR-195-UF Coax. PE3W16513 is a reverse polarity SMA male to N male cable using LMR-195-UF coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16513 SMA reverse polarity male to N male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W25135

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Female to TNC Male Cable Using RG188-DS Coax. PE3W25135 is a SMA female to TNC male cable using RG188-DS coax. This Pasternack SMA female to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25135 SMA female to TNC male cable assembly is constructed with RG188-DS coax.
0
PE3W25134

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Female to TNC Male Cable Using RG188 Coax. PE3W25134 is a SMA female to TNC male cable using RG188 coax. This Pasternack SMA female to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25134 SMA female to TNC male cable assembly is constructed with RG188 coax.
0
PE3C5136

Pasternack Enterprises Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. QMA Male to SMA Female Bulkhead Cable Using PE-SR402AL Coax., Radio frequency assembly QMA male to SMA female bulkhead cable using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to SMA female bulkhead cable using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and SMA bulkhead cable connection on the other. Our QMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to SMA cable is a male to female coax assembly, PE3C5136, can also be known as a QMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA jack cable assembly PE3C5136 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid QMA cable assembly is manufactured with QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency QMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5136 can also be used in the other direction and will be SMA female bulkhead to QMA male cable assembly if the opposite connectivity is required. QMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to SMA female bulkhead cable using PE-SR402AL coax.
0
PE3FCA513-7M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC APC, NK to ST UPC, SM OS2, 2.0mm LSZH, Yellow-7M. Pasternack’s PE3FCA513-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long duplex cable assembly is equipped with FC/APC narrow key to ST/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA513-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA513-7M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/APC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $37.59
5 : $36.09
10 : $34.58
25 : $33.08
0
PE35133

Pasternack Enterprises
0
PE38451-36

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to QN Male Cable 36 Inch Length Using RG223 Coax., Radio frequency assembly N male to QN male cable 36 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to QN male cable 36 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and QN cable connection on the other. Our N type to QN cable assemblies have a male gender on end 1 and male on end 2. This N type to QN cable is a male to male coax assembly, PE38451-36, can also be known as a type N plug to QN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to QN plug cable assembly PE38451-36 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency N type male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38451-36 can also be used in the other direction and will be QN male to type N male cable assembly if the opposite connectivity is required. Type N plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QN male cable 36 inch length using RG223 coax.
1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5
0
PE3513

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50. SMA Male to SMA Male Right Angle Cable Using RG316 Coax. PE3513 is a SMA male to SMA male right angle cable using RG316 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3513 SMA male to SMA male right angle cable assembly is constructed with RG316 coax and the maximum VSWR is 1.4:1.
0
PE3513LF-36

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using RG316 Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using RG316 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 36 inch length using RG316 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3513LF-36, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3513LF-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3513LF-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 36 inch length using RG316 coax, RoHS.
1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75
0

Teledyne HiRel
5962-8951301SA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-8951302RA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-89513022A

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-8751308VA

Teledyne HiRel STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant
0
5962-8951301RA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-8751309VA

Teledyne HiRel STATIC RAM, 1K X 4, 45 NS ACCESS TIME
RoHS : Not Compliant
0
5962-8751307VA

Teledyne HiRel STATIC RAM, 1K X 4, 25 NS ACCESS TIME
RoHS : Not Compliant
0
5962-89513012A

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-8951302SA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0

Venkel Ltd.
C0603C0G251-3R9CNP

VENKEL LTD HV Chip Capacitor;0603;C0G;250V;3.9pF;�0.25pF
RoHS : Compliant
8,000
C0505HQN251-390FNE

VENKEL LTD High-Q NP0 Capacitor;0505;HQN;250V;39pF;�1%
RoHS : Compliant
0
C0505HQN251-3R9BNE

VENKEL LTD High-Q NP0 Capacitor;0505;HQN;250V;3.9pF;�0.1pF
RoHS : Compliant
0
C0603HQN251-3R6ANP

VENKEL LTD High-Q NP0 Capacitor;0603;HQN;250V;3.6pF;�0.05pF
RoHS : Compliant
0
C0805HQN251-300GNP

VENKEL LTD High-Q NP0 Capacitor;0805;HQN;250V;30pF;�2%
RoHS : Compliant
0
C0805HQN251-3R1BNP

VENKEL LTD High-Q NP0 Capacitor;0805;HQN;250V;3.1pF;�0.1pF
RoHS : Compliant
0
SWCR0805-VK-513MT

VENKEL LTD Surge Withstanding CR;0805;1/2W;�100PPM;51K;�20%
RoHS : Compliant
0
SWCR1210-VK-513JT

VENKEL LTD Surge Withstanding CR;1210;1/2W;�100PPM;51K;�5%
RoHS : Compliant
0
SWCR2512-JK-513JT

VENKEL LTD Surge Withstanding CR;2512;2W;�100PPM;51K;�5%
RoHS : Compliant
0
CR0805-8W-513JT

VENKEL LTD Chip Resistor;0805;1/8W;51K;�5%
RoHS : Compliant
0
C0505HQN251-330FNE

VENKEL LTD High-Q NP0 Capacitor;0505;HQN;250V;33pF;�1%
RoHS : Compliant
0
C0505HQN251-3R2CNE

VENKEL LTD High-Q NP0 Capacitor;0505;HQN;250V;3.2pF;�0.25pF
RoHS : Compliant
0
C0603C0G251-390GNP

VENKEL LTD HV Chip Capacitor;0603;C0G;250V;39pF;�2%
RoHS : Compliant
0
C1111HQN251-3R3BNE

VENKEL LTD High-Q NP0 Capacitor;1111;HQN;250V;3.3pF;�0.1pF
RoHS : Compliant
0
C1812X7R251-393KNE

VENKEL LTD HV Chip Capacitor;1812;X7R;250V;0.039uF;�10%
RoHS : Compliant
0

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com