| Electronic Components Datasheet Search |
|
574G-R20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Powell Electronics | 5748634-1 | TE Connectivity | KIT,RCPT,15P,HDP-22,SHLD HDWRE RoHS : Compliant |
| 5,874 | |
| EC1574-000 | TE Connectivity | Labels and Industrial Warning Signs |
| 3,135 | ||
| 5-1825574-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,858 | ||
| 5746613-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,163 | ||
| 5745071-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 1,468 | ||
| 5749200-1 | TE Connectivity | D-Sub Connectors |
| 792 | ||
| 1-5747150-6 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 781 | ||
| 5745058-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 731 | ||
| 5747841-2 | TE Connectivity | TE COMPONENT (REF 5747841-2) RoHS : Compliant |
| 630 | ||
| 1-5747301-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 510 | ||
| 5749721-3 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 135 | ||
| 5748677-4 | TE Connectivity | PLTD PLST CBL CLMP KIT,SZ 4 RoHS : Not Compliant |
| 73 | ||
| B5743-234-M-T-1 | Harwin | BS Datamate L-Tek DIL Male Vertical 3mm RoHS : Not Compliant |
| 36 | ||
| 640457-4 | TE Connectivity | MTA 100 - Header Asse RoHS : Compliant |
| 18 | ||
| 5747830-4 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 3 | ||
![]() PUI | 12.89574 | 25,920 | ||||
| 9WG5748P5G011 | Sanyo-Denki Co Ltd | RoHS : Compliant | 6,182 | |||
| 12.88574 | 3,585 | |||||
| 12.86574 | 2,000 | |||||
| 2012-1X01G00S-2.5-7.4-L | 616 | |||||
| 12.87574 | 102 | |||||
| 12.85574 | 38 | |||||
| 2012-1X03G00S-2.5-7.4-L | 20 | |||||
| 5-747909-2 | TE Connectivity | RoHS : Compliant | 10 | |||
| 9WG5748P5G001 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 8 | ||
![]() Rutronik | SIR574DP-T1-BE3 | Vishay Intertechnologies | N-CH 150V 48,1A 13,5mOhm PPAK SO-8 RoHS : Compliant |
| 6,000 | |
![]() Chip 1 Exchange | B57471V2474J062 | TDK Corporation | INSTOCK RoHS : Compliant | 5,458 | ||
MM74HCT574MTCX![]() | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 1,518 | |||
| MM74HCT574MTCX | onsemi | INSTOCK RoHS : Compliant | 1,354 | |||
| LM5574MT | INSTOCK | 370 | ||||
| LM5574MT | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 370 | |||
| PCF8574AT/3,118 | INSTOCK | 245 | ||||
| DXO57-4-50-T-3.3-TS | MULTC | INSTOCK | 209 | |||
| LM2574HVM-5.0P+ | National Semiconductor Corporation | INSTOCK | 196 | |||
| PCF8574TS | INSTOCK | 108 | ||||
MX574AJP![]() | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 83 | |||
PCF8574T![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 48 | |||
| PCF8574T | INSTOCK | 44 | ||||
| MCM6574P | INSTOCK | 28 | ||||
| ACT574 | INSTOCK | 22 | ||||
| MS3057-4B | INSTOCK | 1 | ||||
![]() Avnet Asia | 0513380574 | Molex | Mezzanine Connector, Receptacle, 50 Contacts, 2 Rows, 0.4mm, Gold, SMT, Straight, Phosphor Bronze (Alt: 0513380574) RoHS : Compliant | 60,000 | ||
| 0559090574 | Molex | Mezzanine Connector, Plug, 50 Contacts, 2 Rows, 0.4mm, Gold, SMT, Straight, Brass, Solder (Alt: 0559090574) RoHS : Compliant | 15,000 | |||
| SLG4V45745V | Renesas Electronics Corporation | GPAK MIXED SIGNAL MATRIX_USI (Alt: SLG4V45745V) RoHS : Compliant | 15,000 | |||
| 282857-4 | TE Connectivity | (Alt: 282857-4) RoHS : Compliant |
| 6,000 | ||
74HCT574D,653![]() | Nexperia | (Alt: 74HCT574D,653) RoHS : Compliant | 4,000 | |||
| 5745563-3 | TE Connectivity | (Alt: 5745563-3) RoHS : Compliant |
| 2,500 | ||
| 1005749 | Kyocera AVX Components | DUAL,698~960HZ,2DBI,1710~2690MHZ (Alt: 1005749) RoHS : Compliant | 1,500 | |||
| 10157422-005RHLF | Amphenol Corporation | Connector SODIMM Socket 262Position 0.5mm Solder Right Angle Surface Mount T/R (Alt: 10157422-005RHLF) RoHS : Compliant | 0 | |||
| 009155005742006 | Kyocera AVX Components | (Alt: 009155005742006) RoHS : Compliant | 0 | |||
MC74HC574ADWR2G![]() | onsemi | Flip-Flop, D, 32 ns, 35 MHz, 7.8 mA, SOIC (Alt: MC74HC574ADWR2G) RoHS : Compliant | 0 | |||
| 5745171-2 | TE Connectivity | (Alt: 5745171-2) RoHS : Compliant | 0 | |||
| 2457449-7 | TE Connectivity | (Alt: 2457449-7) RoHS : Compliant | 0 | |||
| 5745175-2 | TE Connectivity | (Alt: 5745175-2) RoHS : Compliant | 0 | |||
| 5747847-4 | TE Connectivity | D Sub Connector, Standard, Receptacle, AMPLIMITE HD-20 Series, 37 Contacts, DC, Solder (Alt: 5747847-4) RoHS : Compliant | 0 | |||
MC74LCX574DTR2G![]() | onsemi | Flip-Flop, 74LCX574, D, 8.5 ns, 150 MHz, TSSOP (Alt: MC74LCX574DTR2G) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | HAL574UA-K | TDK Micronas GmbH | HAL574UA-K RoHS : Compliant |
| 0 | |
AX7DAF1-657.4219T![]() | Abracon Corporation | XTAL OSC XO 657.4219MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| 93-41057-4010 | ADLINK Technology Inc | ADL-N N97, DDR5 8GB, 2xDP, 1xHDMI, 4xGbE, 2xRS-232/422/485, 2xUSB2, 1xUSB3, 1x line-in/line-out/MIC-in, 1x M.2 B-key, 1x M.2 M key, 1x M.2 A/E-key, 1x PCIe x8, 2x PCIe x4 |
| 0 | ||
![]() Chip-Germany GmbH | 5749767-1 | TE Connectivity | RoHS : Compliant | 1 | ||
| 31574 | Wöhner GmbH & Co. KG | 1 | ||||
![]() Component Electronics, Inc | 640457-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 127 | |
| PCF8574TDK | Philips Semiconductors | IN STOCK SHIP TODAY |
| 123 | ||
| PCF8574TD | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 57 | ||
| 57.404.7053.0 | Wieland Electric GmbH | IN STOCK SHIP TODAY |
| 50 | ||
TC74HC574AF![]() | Toshiba America Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant | 48 | |||
| 574502B03300 | BOYD Laconia | IN STOCK SHIP TODAY |
| 23 | ||
| 5745583-5 | Amphenol Corporation | IN STOCK SHIP TODAY |
| 22 | ||
| MS51957-42B | ALATEC Inc | IN STOCK SHIP TODAY |
| 20 | ||
AM79574JC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 20 | |||
SN74HCT574N![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| CD74ACT574M | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 213574-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant | 7 | |||
| MS3057-4C | Glenair Inc | IN STOCK SHIP TODAY |
| 3 | ||
| 5747843-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| 5748477-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() ECCO | 97-3057-4 | Amphenol Industrial Operations |
| 2,131 | ||
| 97-3057-4 | Amphenol Industrial Operations |
| 2,131 | |||
| A30574A | Amphenol PCD |
| 1,450 | |||
| 97-3057-4(621) | Amphenol Industrial Operations |
| 72 | |||
| 97-3057-4(621) | Amphenol Industrial Operations |
| 72 | |||
![]() Flip Electronics | SPC5747GK1CKU2 | NXP Semiconductors | Stock, Ship Today |
| 15,054 | |
| SPC5748CSK0AVKU2 | NXP Semiconductors | Stock RoHS : Compliant | 7,555 | |||
MC74LVX574DWR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,000 | ||
| SPC5741PK1AKLQ8 | NXP Semiconductors | Stock | 6,000 | |||
| SPC5744BFK1AVKU2 | NXP Semiconductors | Stock | 3,000 | |||
SPC5747CK1CMJ6![]() | NXP Semiconductors | Stock | 2,430 | |||
| R5K574MCB4BG#60 | Renesas Electronics Corporation | Stock | 2,400 | |||
| SP5748GTK0AMKU6R | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| SPC5746BBK1AMMH6 | NXP Semiconductors | Stock | 1,760 | |||
| R5K574NCB4BG#00 | Renesas Electronics Corporation | Stock | 1,280 | |||
| SPC5747CBK0ACKU6 | NXP Semiconductors | Stock | 1,200 | |||
SPC5746CSK1MMH6![]() | NXP Semiconductors | Stock RoHS : Compliant | 880 | |||
SPC5748GK1MKU6R![]() | NXP Semiconductors | Stock RoHS : Compliant | 600 | |||
| MPC574XG-MB | NXP Semiconductors | Stock | 221 | |||
| MM74HCT574MTCX | onsemi | Stock, Ship Today RoHS : Compliant |
| 97 | ||
![]() Maritex | 104257-4 | TE Connectivity | Rectangular Connector Housings; 104257-4; TE CONNECTIVITY; 1; 5; 5; No RoHS : Compliant |
| 162,966 | |
| 5-747904-2 | TE Connectivity | D-Sub Connectors; 5-747904-2; TE CONNECTIVITY; D-Sub; Yes; Straight; 30.8 mm RoHS : Compliant |
| 12,987 | ||
| 1755749 | Phoenix Contact | Rectangular Connector Housings; 1755749; PHOENIX CONTACT; 1; 3; Green; Straight RoHS : Compliant |
| 6,956 | ||
| 5747840-4 | TE Connectivity | D-Sub Connectors; 5747840-4; TE CONNECTIVITY; D-Sub; Yes; Right Angle RoHS : Compliant |
| 6,172 | ||
| ZTAC4,00MG-2P-0.5%-(7.4X3.4)-ROHS ZTACC? | Fronter Electronics Co Ltd | Ceramic resonator; SMD; 4.00MHz=ZTA; CC4.00MG; 2P; 7.4 x 3.4 |
| 3,788 | ||
| 5746881-1 | TE Connectivity | D-Sub Connectors; 5746881-1; TE CONNECTIVITY; 7.11 mm; Male; No RoHS : Compliant |
| 3,000 | ||
| 1881574 | Phoenix Contact | Rectangular Connector Housings; 1881574; PHOENIX CONTACT; 1; 4; Green; Vertical RoHS : Compliant |
| 2,728 | ||
| 5747844-4 | TE Connectivity | D-Sub Connectors; 5747844-4; TE CONNECTIVITY; D-Sub; Yes; Right Angle; 6 A RoHS : Compliant |
| 828 | ||
| 5-747916-2 | TE Connectivity | D-Sub Connectors; 5-747916-2; TE CONNECTIVITY; 37; Male; 69.4 mm; Straight RoHS : Compliant |
| 398 | ||
| 5747299-8 | TE Connectivity | D-Sub Connectors; 5747299-8; TE CONNECTIVITY; D-Sub; No; Vertical RoHS : Compliant |
| 231 | ||
U74HC574G-P20-R![]() | Unisonic Technologies Co Ltd | Flip Flops; U74HC574G-P20-R; UTC RoHS : Compliant |
| 76 | ||
| 5745928-2 | TE Connectivity | D-Sub Connectors; 5745928-2; TE CONNECTIVITY; Female; 53.03 mm; 25; Vertical RoHS : Compliant |
| 19 | ||
| 5-747905-2 | TE Connectivity | D-Sub Connectors; 5-747905-2; TE CONNECTIVITY; D-Sub; Yes; Straight; 3 A RoHS : Compliant |
| 6 | ||
| 1757475 | Phoenix Contact | Rectangular Connector Housings; 1757475; PHOENIX CONTACT; 1; 2; Green; Right Angle RoHS : Compliant |
| 3 | ||
| 5-747917-2 | TE Connectivity | D-Sub Connectors; 5-747917-2; TE CONNECTIVITY; 37; Receptacle; 69.4 mm; Straight RoHS : Compliant |
| 1 | ||
![]() Neutron USA | 5-747909-2 | TE Connectivity | D-Sub Standard Connectors 15P SOCKET TIN RoHS : Compliant |
| 50 | |
| 5745171-2 | TE Connectivity | D-Sub Backshells KIT RoHS : Compliant |
| 50 | ||
| 4157440000 | Weidmüller Interface GmbH & Co. KG | Electrical Enclosure Accessories PF RS 80 OR 2000MM RoHS : Compliant |
| 23 | ||
| 9SG5748P5H01 | Sanyo-Denki Co Ltd | DC Fans Fan 172x51mm 48VDC Hi-Perf Pulse PWM RoHS : Compliant |
| 9 | ||
| 09488585745100 | HARTING Technology Group | Ethernet Cables / Networking Cables VB RJ45 LaR VB RJ45 LaR Cat.6A PUR 10m RoHS : Compliant |
| 5 | ||
| 9457450150 | Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables SAIL-M8BG-3-1.5U RoHS : Compliant |
| 3 | ||
| 6574S-1-102 | Bourns Inc | Precision Potentiometers 1K 10% Servo Mnt RoHS : Compliant |
| 1 | ||
| 5748677-4 | TE Connectivity | Hood D-Sub 37Pos Str.Exit AMP MetallizedPlastic 0.255-0.47InCblDia EMI/RFIShield RoHS : Not Compliant |
| 0 | ||
| 88970574 | Crouzet | HMI 9.7" Touchscreen 16.7M Color 1024x768 Pixels 24VDC IP65 Performance Series |
| 0 | ||
| 5749916-2 | TE Connectivity | Hood D-Sub 37Pos Straight/120Deg AMP Polypropylene 0.255-0.550In.CblDia RoHS : Compliant |
| 0 | ||
| 2907574 | Phoenix Contact | Circuit Breaker, 1pole, Screw, 18-2AWG, 120VAC, 60VDC, TMC 81C 25A RoHS : Compliant |
| 0 | ||
| 5745078-4 | TE Connectivity | AMPLIMITE HD-20 Series 25 Way Through Hole Mount PCB D-sub Connector Socket RoHS : Compliant |
| 0 | ||
| AXG94574 | Axiom Manufacturing | AXIOM MTRJ/MTRJ OM1 FIBER CABLE 4M |
| 0 | ||
| QS18VP6FF100Q5-74210 | Banner Engineering Corp | PE Sensor, Fixed-Field, R: 100 mm, 10-30VDC, L/D PNP, 0.15m QDM12, 74210 |
| 0 | ||
| 2900574 | Phoenix Contact | Hybrid motor starter, 24VDC control, 500VAC 2.4 A Out, ELR H5-I-SC- 24DC/ 500AC-2 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03574-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug right angle to SMB plug right angle cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assembly has plug gender on end 1 and plug on end 2. PE3W03574-18 can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMB male to SMB male cable assembly PE3W03574-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W03574-18 RF cable are available on our downloadable PDF datasheet. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. |
| 2,383 | |
| PE3W03574-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 9 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 9 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug right angle to SMB plug right angle cable 9 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assembly has plug gender on end 1 and plug on end 2. PE3W03574-9 can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMB male to SMB male cable assembly PE3W03574-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W03574-9 RF cable are available on our downloadable PDF datasheet. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. |
| 2,383 | ||
| PE3W08574LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.4mm Male to SMA Male Cable Using RG405 Coax with HeatShrink, LF Solder., Radio frequency assembly 2.4mm male to SMA male cable using RG405 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to SMA male cable using RG405 coax with heatshrink, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMA cable connection on the other. Our 2.4mm to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08574LF/HS can also be known as a 2.4mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMA plug cable assembly PE3W08574LF/HS is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 26.5 GHz maximum frequency 2.4mm male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08574LF/HS can also be used in the other direction and will be SMA male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMA cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMA male cable using RG405 coax with heatshrink, LF solder. | 200 | |||
| PE3M0057-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. MIL-DTL-17 BNC Male to BNC Male Cable 48 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to BNC male cable 48 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to BNC male cable 48 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/16-0014 BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/16-0014 BNC cable connection on the other. Our M39012/16-0014 BNC to M39012/16-0014 BNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/16-0014 BNC cable is a male to male coax assembly, PE3M0057-48, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/16-0014 BNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/16-0014 BNC plug cable assembly PE3M0057-48 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/16-0014 BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/16-0014 BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/16-0014 BNC plug to M39012/16-0014 BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/16-0014 BNC cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to BNC male cable 48 inch length using M17/128-RG400 coax. |
| 131 | ||
| PE3W08574-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.4mm Male to SMA Male Cable 12 Inch Using RG405 Coax., Radio frequency assembly 2.4mm male to SMA male cable 12 inch using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm male to SMA male cable 12 inch using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMA cable connection on the other. Our 2.4mm to SMA cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to SMA cable is a male to male coax assembly, PE3W08574-12, can also be known as a 2.4mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMA plug cable assembly PE3W08574-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 26.5 GHz maximum frequency 2.4mm male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08574-12 can also be used in the other direction and will be SMA male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMA cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMA male cable 12 inch using RG405 coax. |
| 40 | ||
| PE3M0357-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 D38999 Contact Socket to SMA Female Cable 48 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0357-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0357-48 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0357-48 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. M39029 socket to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0357-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to SMA RF cable are available on our downloadable PDF datasheet. M39029 socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to SMA RF cable assembly as per your requirements. |
| 27 | ||
| PE45743 | Pasternack Enterprises | Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Interface Type 1: with EMI gasket, Interface Type 2: accepts 0.51mm (.020inch) pin. 2.4mm Female Field Replaceable Connector 2 Hole Flange Mount with EMI gasket, accepts 0.51mm (.020inch) pin. PE45743 2.4mm female 2 hole flange connector has an interface type of 2.4mm female with EMI gasket, accepts 0.51mm (.020inch) pin and a 50 Ohm impedance. Pasternack 2.4mm female 2 hole flange connector uses shield/contact as an attachment method. Our female 2.4mm connector provides a minimum frequency of DC and a maximum frequency of 50 GHz. The Pasternack 2.4mm female 2 hole flange connector has a PEI dielectric type and a VSWR of 1.2. The Pasternack 2.4mm connector has a passivated stainless steel body. Our PE45743 2.4mm connector uses beryllium copper contact. This 2.4mm female 2 hole flange RF connector is RoHS and REACH compliant. This Pasternack female 2.4mm 2 hole flange connector will ship the same day as purchased. Our 2 hole flange 2.4mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.4mm connector cable assemblies that will ship the same day as well. |
| 10 | ||
| PE45746 | Pasternack Enterprises | Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Interface Type 1: with EMI gasket, Interface Type 2: accepts 0.38mm (.015inch) pin. 2.4mm Female Field Replaceable Connector 2 Hole Flange Mount with EMI gasket, accepts 0.38mm (.015inch) pin. PE45746 2.4mm female 2 hole flange connector has an interface type of 2.4mm female with EMI gasket, accepts 0.38mm (.015inch) pin and a 50 Ohm impedance. Pasternack 2.4mm female 2 hole flange connector uses shield/contact as an attachment method. Our female 2.4mm connector provides a minimum frequency of DC and a maximum frequency of 50 GHz. The Pasternack 2.4mm female 2 hole flange connector has a PEI dielectric type and a VSWR of 1.2. The Pasternack 2.4mm connector has a passivated stainless steel body. Our PE45746 2.4mm connector uses beryllium copper contact. This 2.4mm female 2 hole flange RF connector is RoHS and REACH compliant. This Pasternack female 2.4mm 2 hole flange connector will ship the same day as purchased. Our 2 hole flange 2.4mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.4mm connector cable assemblies that will ship the same day as well. |
| 10 | ||
| PE34574-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 48 inches. 3.5mm Male to 3.5mm Male Cable 48 Inch Length Using RG405 Coax., Radio frequency assembly 3.5mm male to 3.5mm male cable 48 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm male cable 48 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE34574-48, can also be known as a 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE34574-48 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm male cable 48 inch length using RG405 coax. |
| 4 | ||
| PE3W05741/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Female Bulkhead Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to TNC female bulkhead cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC female bulkhead cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC bulkhead cable connection on the other. Our SMA to TNC cable assembly has male gender on end 1 and female on end 2. PE3W05741/HS-12 can also be known as a SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to TNC jack cable assembly PE3W05741/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W05741/HS-12 RF cable are available on our downloadable PDF datasheet.PE3W05741/HS-12 can also be used in the other direction and will be TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04574 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using PE-C400 Coax. PE3W04574 is a N male to N male cable using PE-C400 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04574 N male to N male cable assembly is constructed with PE-C400 coax. | 0 | |||
| PE3W07657-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to BNC Male Right Angle Cable 48 Inch Length Using RG214 Coax., Radio frequency assembly TNC male right angle to BNC male right angle cable 48 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to BNC male right angle cable 48 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and right angle BNC cable connection on the other. Our right angle TNC to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE3W07657-48 can also be known as a right angle TNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.600 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. TNC plug to BNC plug cable assembly PE3W07657-48 is built with RG214 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W07657-48 RF cable are available on our downloadable PDF datasheet.PE3W07657-48 can also be used in the other direction and will be right angle BNC male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE37957-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 48 Inch Length Using PE-C240 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE37957-48, can also be known as a low loss 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37957-48 is built with PE-C240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37957-48 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle cable 48 inch length using PE-C240 coax. |
| 0 | ||
| PE3W05741/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Female Bulkhead Cable 24 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to TNC female bulkhead cable 24 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC female bulkhead cable 24 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC bulkhead cable connection on the other. Our SMA to TNC cable assembly has male gender on end 1 and female on end 2. PE3W05741/HS-24 can also be known as a SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to TNC jack cable assembly PE3W05741/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W05741/HS-24 RF cable are available on our downloadable PDF datasheet.PE3W05741/HS-24 can also be used in the other direction and will be TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W13574 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male to 3.5mm Female Bulkhead Cable Using PE-SR402FL Coax. PE3W13574 is a SMA male to 3.5mm female bulkhead cable using PE-SR402FL coax. This Pasternack SMA male to 3.5mm female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male SMA to female 3.5mm bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13574 SMA male to 3.5mm female bulkhead cable assembly is constructed with PE-SR402FL coax. | 0 | |||
![]() TE Connectivity | 5746613-1 | TE Connectivity | 08 DIP PLUG CONN-W/COVER Connector System: Wire-to-Board Number of Positions: 8 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 8 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5746613-1 | Internal Number: 5746613-1 | TE Connectivity RoHS : Compliant |
| 2,827 | |
| 5745078-4 | TE Connectivity | HD-20 RCPT 25P VERT FFSCRLK Number of Positions: 25 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Receptacle Board-to-Board Board Mount | Part Number: 5745078-4 | Internal Number: 5745078-4 | 3 | TE Connectivity RoHS : Compliant |
| 1,325 | ||
| 5748634-1 | TE Connectivity | KIT,RCPT,15P,HDP-22,SHLD HDWRE Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 1 D-Shaped Connector | 15 Receptacle Cable-to-Cable Panel Mount | Part Number: 5748634-1 | Internal Number: 5748634-1 | TE Connectivity RoHS : Compliant |
| 1,199 | ||
| 5745071-4 | TE Connectivity | HD-20 PLUG 9P VERT FFSCRLK Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5745071-4 | Internal Number: 5745071-4 | TE Connectivity RoHS : Compliant |
| 1,162 | ||
| 5745908-2 | TE Connectivity | PLUG ASSY,15P,HDP-20,CN Number of Positions: 15 Connector & Housing Type: Plug Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 D-Shaped Connector | 15 Plug Cable-to-Cable Panel Mount | Part Number: 5745908-2 | Internal Number: 5745908-2 | TE Connectivity RoHS : Compliant |
| 660 | ||
| 5748026-1 | TE Connectivity | 15 PLUG SP/FMS (IN,SL) Number of Positions: 15 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Plug Board-to-Board Board Mount | Part Number: 5748026-1 | Internal Number: 5748026-1 | TE Connectivity RoHS : Compliant |
| 459 | ||
| 5747841-2 | TE Connectivity | 15 MSFL PLUG RA 318 (FM,BL) Number of Positions: 15 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Plug Board-to-Board Board Mount | Part Number: 5747841-2 | Internal Number: 5747841-2 | TE Connectivity RoHS : Compliant |
| 425 | ||
| 5745820-2 | TE Connectivity | 15 RCPT SP/MS CNUT Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5745820-2 | Internal Number: 5745820-2 | TE Connectivity RoHS : Compliant |
| 351 | ||
| 2057419-3 | TE Connectivity | IMP100S,H,V2P10C,LG,OEW39,5.5 Number of Positions: 60 Row-to-Row Spacing: 1.35 mm Row-to-Row Spacing: .053 in Mating Alignment: With Mating Alignment Type: Guide Pin High Speed Backplane Connector | 60 1.35 mm .053" With | Part Number: 2057419-3 | Internal Number: 2057419-3 | TE Connectivity RoHS : Compliant |
| 333 | ||
| 5747099-1 | TE Connectivity | CABLE CLAMP KIT,SZ 2 Strain Relief Accessory Type: Cable Clamp Kit Primary Product Material: Thermoplastic Compatible With Connector Shell Size: 2 Shielded: Yes Number of Positions: 15 Cable Clamp Kit Thermoplastic 2 | Connector Strain Relief | Part Number: 5747099-1 | Internal Number: 5747099-1 | TE Connectivity RoHS : Compliant |
| 122 | ||
| 5748979-1 | TE Connectivity | AMP III RCPT 9P RA 318 FFSCRLK/BDLK Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 5748979-1 | Internal Number: 5748979-1 | TE Connectivity RoHS : Compliant |
| 89 | ||
| 5749721-3 | TE Connectivity | 28 50SR VERT RCPT ASSY Number of Positions: 28 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Centerline (Pitch): 1.27 mm D-Shaped Connector | 28 Receptacle Cable-to-Board Board Mount | Part Number: 5749721-3 | Internal Number: 5749721-3 | 1.27 mm | TE Connectivity RoHS : Compliant |
| 70 | ||
| 5747250-3 | TE Connectivity | 09 MSFL PLUG RA 318 (IN,FM) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5747250-3 | Internal Number: 5747250-3 | 1 | TE Connectivity RoHS : Compliant |
| 49 | ||
| 1-5747150-6 | TE Connectivity | 09 RCPT SP/FMS SCRLK Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Board-to-Board Board Mount | Part Number: 1-5747150-6 | Internal Number: 1-5747150-6 | TE Connectivity RoHS : Compliant |
| 44 | ||
| 5749193-2 | TE Connectivity | 50 50SR KIT,ST,UK Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Kit Primary Product Material: Zinc Body Orientation: Straight Number of Positions: 50 Shielded Backshell Kit Zinc Straight | Connector Backshell | Part Number: 5749193-2 | Internal Number: 5749193-2 | TE Connectivity RoHS : Compliant |
| 11 | ||
![]() Waytek, Inc. | 57400 OR 611-040 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #40 Band 1/2" 1" TO 3" |
| 812 | |
| 57480 OR 611-048 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #48 Band 1/2" 1-1/2" TO 3-1/2" |
| 780 | ||
| 57440 OR 611-044 | Ideal Clamp Products Inc | Standard Stainless Steel Band Hose Clamp #44 Band 1/2" 1-1/4" TO 3-1/4" |
| 357 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |