| Electronic Components Datasheet Search |
|
5887-P-R49 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 5558872-1 | TE Connectivity | Modular Connector, RJ22 Jack, 1 x 1 (Port), 4P4C, Cat3, Through Hole Mount - Trays (Alt: 5558872-1) RoHS : Compliant |
| 817 | |
| 5558872-1 | TE Connectivity | Modular Connector, RJ22 Jack, 1 x 1 (Port), 4P4C, Cat3, Through Hole Mount - Bulk (Alt: 75AC9369) RoHS : Compliant |
| 0 | ||
| 6588715-2 | TE Connectivity | - Bulk (Alt: 6588715-2) RoHS : Compliant | 0 | |||
| 6588715-3 | TE Connectivity | - Bulk (Alt: 6588715-3) RoHS : Compliant | 0 | |||
| 6588719-9 | TE Connectivity | - Bulk (Alt: 6588719-9) RoHS : Compliant | 0 | |||
| TNPW0805887RBEEN | Vishay Intertechnologies | SMD Chip Resistor, 887 Ohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, High Stability - Tape and Reel (Alt: TNPW0805887RBEEN) RoHS : Compliant |
| 0 | ||
| 7-2836588-7 | TE Connectivity | - Bag (Alt: 7-2836588-7) RoHS : Not Compliant | 0 | |||
| CMF55887K00DHR8 | Vishay Intertechnologies | - Tape and Reel (Alt: CMF55887K00DHR8) RoHS : Not Compliant |
| 0 | ||
| B65887E315A87 | TDK Corporation | - Trays (Alt: B65887E0315A087) RoHS : Compliant |
| 0 | ||
| B65887ER487 | TDK Corporation | RM14 N87 6000 +30% -20% - Trays (Alt: B65887E0000R487) RoHS : Compliant |
| 0 | ||
| 1-805887-5 | TE Connectivity | - Bag (Alt: 1-805887-5) RoHS : Not Compliant | 0 | |||
| 2588700000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2588700000) RoHS : Not Compliant | 0 | |||
| RCMX0588703FHS14 | Vishay Intertechnologies | - Bag (Alt: RCMX0588703FHS14) RoHS : Compliant |
| 0 | ||
| ERC55887K00BEEA600 | Vishay Intertechnologies | Through Hole Resistor, 887 kohm, ERC Series, 125 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Tape and Reel (Alt: ERC55887K00BEEA600) RoHS : Compliant |
| 0 | ||
| MKL999WFGS005 887007 | Intel Corporation | (Alt: MKL999WFGS005 887007) RoHS : Not Compliant |
| 0 | ||
![]() Newark | LFXTAL085887RL3K | IQD Frequency Products | Crystal, 32Mhz, 8Pf, Smd, 3.2Mm X 2.5Mm; |Iqd Frequency Products LFXTAL085887RL3K RoHS : Compliant |
| 945 | |
| LFXTAL085887RL3K | IQD Frequency Products | Crystal, 32Mhz, 8Pf, Smd, 3.2Mm X 2.5Mm; |Iqd Frequency Products LFXTAL085887RL3K RoHS : Compliant |
| 945 | ||
| 35-8875 | Stellar labs (MCM Electronics) | Headphone, 16Hz-20Khz, 16 Ohm; Frequency Response Min:16Hz; Frequency Response Max:20Khz; Impedance:16Ohm; Drive Unit Type:Dynamic; Connector Type:3.5Mm Connector; Lead Length:3.9Ft; Product Range:-; Colour:Black |Stellar Labs 35-8875 RoHS : Not Compliant |
| 510 | ||
| 5558872-1 | TE Connectivity | Rj22 Connector, Jack, 4P4C, 1Port, Cat3; |Te Connectivity Amp 5558872-1 RoHS : Compliant |
| 352 | ||
| B65887E0000R087 | TDK Corporation | Ferrite Core, Rm, N87; |Tdk B65887E0000R087 RoHS : Compliant |
| 240 | ||
| B65887E0000R041 | TDK Corporation | Transformer Core, Rm, N41, 70Mm; |Tdk B65887E0000R041 RoHS : Compliant |
| 49 | ||
| 63825-8875 | Molex | Hand Crimp Tool Locator, Terminal; |Molex 63825-8875 (Alternate Part Number: 887191517285 RoHS : Not Compliant |
| 9 | ||
| TR00015887-000 | TR Fastenings | Set Screw, Hex Socket, M4 X 10Mm, Ss A2; |Tr Fastenings TR00015887-000 RoHS : Compliant |
| 4 | ||
| 785887-01 | NI | Software Defined Radio, Encl; Available Until Stocks Are Exhausted |Ni/emerson 785887-01 RoHS : Compliant |
| 3 | ||
| 395-120-558-878 | EDAC Inc | Conn, Card Edge, Edac 395-120-558-878; |Edac 395-120-558-878 RoHS : Compliant |
| 0 | ||
| HDSC0805-887RMT1 | TT Electronics Welwyn Components | Chip Res Smd, 887R, ±20%, 250Mw; |Tt Electronics/welwyn HDSC0805-887RMT1 RoHS : Compliant |
| 0 | ||
| HDSC0805-887RMT1 | TT Electronics Welwyn Components | Chip Res Smd, 887R, ±20%, 250Mw; |Tt Electronics/welwyn HDSC0805-887RMT1 RoHS : Compliant |
| 0 | ||
| HDSC0805-887KJT1 | TT Electronics Welwyn Components | Chip Res Smd, 887K, ±5%, 250Mw; |Tt Electronics/welwyn HDSC0805-887KJT1 RoHS : Compliant |
| 0 | ||
| HDSC0805-887KJT1 | TT Electronics Welwyn Components | Chip Res Smd, 887K, ±5%, 250Mw; |Tt Electronics/welwyn HDSC0805-887KJT1 RoHS : Compliant |
| 0 | ||
| HDSC0805-887RKT3 | TT Electronics Welwyn Components | Res, 887R, 10%, 0.25W, 0805, Thick Film; Resistance:887Ohm; Resistance Tolerance:± 10%; Power Rating:250Mw; Resistor Case/Package:0805 [2012 Metric]; Resistor Technology:Thick Film (Double Sided); Resistor Type:Sulfur Resistant Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX5887EGK+D | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Compliant |
| 2,146 | |
| MAX5887EVKIT# | Analog Devices Inc | Evaluation Kit MAX5887 (3.3V, |
| 21 | ||
| MAX5887EGK+TD | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Compliant |
| 0 | ||
| MAX5887EGK/GG8 | Analog Devices Inc | 3.3V, 14-Bit, 500Msps High Dyn RoHS : Not Compliant | 0 | |||
![]() RS | 1755-3/4X60FT (7000058870) | 3M | TAPE, COTTON FRICTION, 60 FT., 3/4 IN., +21 C, 0.015 IN., WOVEN COTTON FABRIC |
| 410 | |
| 23_SMA-50-0-13/111_NH (22658873) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, STRAIGHT PANEL RECEPTACLE JACK, FLANGE MOUN |
| 75 | ||
| 5558872-1 | TE Connectivity | CAT3 4P4C STRAIGHT THROUGH HOLE UTP RJ22 MODULAR JACK CONNECTOR RoHS : Compliant |
| 49 | ||
| 2345887 | RS Pro | ADHESIVE LINED HEAT SHRINK TUBING, 12.7MM SLEEVE, D X 1.22M L, 3:1 RATIO, BLACK |
| 31 | ||
| HSJ200 (Z235887) | Mersen Electrical Power | FUSE, HIGH SPEED, CLASS J, I.R. 200KA AC/100KA DC, 600VAC/500VDC, 200A |
| 24 | ||
| 952X (7000058873) | 3M | CONN CRIMPTERM QUICKDISCONNECT T-TAP FEMALE 18-14AWG INSUL. SCOTCHLOK |
| 16 | ||
| 33588 (7100132681) | 3M | FILE BELT SANDER CONTACT ARM ASSEMBLY, 457 MM (18 IN) X 13 MM |
| 7 | ||
| 2675887 | RS Pro | EQUIPMENT HOOK-UP WIRE, SINGLE CORE, PVC, 7 STRANDS, 7 0.2MM 500M, YELLOW |
| 3 | ||
| 1365887 | RS Pro | THERMOCOUPLE TYPE K 9.84 FT (3M) 550F (260C) MAX 1/0.3 STRANDING 28AWG |
| 2 | ||
| OXP12X800 (1SCA145887R1001) | ABB Low Voltage Products and Systems | OPERATING SHAFT 31.5" (800MM) |
| 2 | ||
| 1458871 (SACC-E-M12FS-5CON-M16/0 5 VA) | Phoenix Contact | CABLE; SENSOR/ACT; PANEL FEED-THROUGH; 5 POS; M12; SACC-E-M12FS-5CON-M16/0,5 VA |
| 2 | ||
| 7058876 (7059976) | RS Pro | BLACK COMPOSITE TOE BOOT MENS 11 LACE UP LEATHER UPPER COMPOSITE MIDSOLE |
| 1 | ||
| GL10-P4212 (1065887) | SICK AG | PHOTOELECTRIC RETROREFLECTIVE SENSOR,15M AND 12M, VISBL RED, PNP, M12 CONN |
| 1 | ||
| MS6-LFR-1/2-D7-E-R-M (588774) | Festo | FILTER REGULATOR, MS6 SERIES |
| 1 | ||
| 35887 (00051131358874) | 3M | EZ Sand Multi Purpose Repair Material, 47.3 mL Caridge |
| 0 | ||
![]() Bisco Industries | MS51958-87 | Mac Fastteners Inc | 15 | |||
| MS51958-87 | Pilgrim Screw Corporation | 3 | ||||
| MS51958-87 | MS MACHINE SCREWS | 1 | ||||
![]() Rochester Electronics | MAX5887EGK+D | Analog Devices Inc | MAX5887 - 3.3V, 14-Bit, 500Msps High Dynamic Performance DAC with Differential LVDS Inputs RoHS : Compliant |
| 1,390 | |
MAX5887EGK![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant |
| 2,417 | ||
![]() Sager | 0558870401 | Molex | I/O Connectors | 0 | ||
| 1200658875 | Molex | Sensor Cables / Actuator Cables MMC-3P-FE-90-2M-SJTO;SS RoHS : Compliant | 0 | |||
| 5558872-1 | TE Connectivity | Modular Connectors / Ethernet Connectors W/O PANEL STOPS 4-4 RoHS : Compliant |
| 0 | ||
| 7-2836588-7 | TE Connectivity | Crimpers / Crimping Tools OC-080F120F-CRIMPTOOLINGKIT | 0 | |||
| 1-805887-5 | TE Connectivity | Crimpers / Crimping Tools ANVIL,COMBINATION | 0 | |||
| 0638258875 | Molex | Crimpers / Crimping Tools LOCATOR ASSEMBLY |
| 0 | ||
| 1-2058588-7 | TE Connectivity | Lighting Connectors Disp M-CPC FRONT 14P 0D Blue | 0 | |||
| 7-805887-9 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION | 0 | |||
| 5605887 | Phoenix Contact | Phoenix Contact VS08-LI-VS1P67- RJ45-CF-5.0 FR | 0 | |||
| 3-805887-0 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
| 4-805887-5 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION | 0 | |||
| 5-805887-9 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 4-805887-4 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 5-805887-3 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION |
| 0 | ||
| 6-805887-8 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
![]() TME | A5887H | Antenova M2M | Antenna: communication; WiFi; linear; SMD; 50Ω; 2.4÷2.5GHz RoHS : Compliant |
| 1,000 | |
| 3-5175887-0 | TE Connectivity | 3-5175887-0 RoHS : Compliant |
| 342 | ||
| 2588770000 | Weidmüller Interface GmbH & Co. KG | 2588770000 RoHS : Compliant |
| 288 | ||
| 2-5175887-9 | TE Connectivity | Contact; female; gold-plated; soldering,THT; 1.27mm; vertical RoHS : Compliant |
| 185 | ||
| 5558872-1 | TE Connectivity | Connector: RJ9; socket; PIN: 4; 4p4c; THT; straight; 16.51mm RoHS : Compliant |
| 114 | ||
| 5887 | SOLID TOOLS | Trash bags; blue; 120l; 10pcs. |
| 7 | ||
| 45887010 | TE Connectivity | Contactor: 3-pole |
| 4 | ||
| 1158872 | Bossard Group | Screw; M5; M5x14; 0.8; Head: countersunk; Phillips; PH2; steel; zinc |
| 0 | ||
| CRCW0805887KFKEA | Vishay Intertechnologies | Resistor: thick film; 887kΩ; SMD; 0805; 125mW; ±1%; 150V; -55÷155°C RoHS : Compliant |
| 0 | ||
| RCA0805887RFKEA | Vishay Intertechnologies | Resistor: thick film; 887Ω; 0805; 125mW; ±1%; 150V; -55÷155°C RoHS : Compliant |
| 0 | ||
| 1358870000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 9.5A; 200V RoHS : Compliant |
| 0 | ||
| CRCW0805887RFHEAP | Vishay Intertechnologies | Resistor: thick film; 887Ω; SMD; 0805; 125mW; ±1%; 150V; -55÷155°C RoHS : Compliant |
| 0 | ||
| 95887 | Goobay | Patch cord; U/UTP; Cat 6; RJ45 plug,both sides; stranded; Cu; 5m |
| 0 | ||
| 10058871 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 14; THT; 3A; 250V; 1x14 |
| 0 | ||
| 2-1633588-7 | TE Connectivity | Tool: for crimping RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | LFXTAL015887BULK | IQD Frequency Products | Parallel - Fundamental Quartz Crystal, 3.6864MHz Nom RoHS : Compliant | 450 | ||
![]() Interstate Connecting Components | 5558872-1 | TE Connectivity | MJTE4PW/0 PNL STOPS RoHS : Compliant |
| 1,690 | |
| 2305887-2 | TE Connectivity | 5 TTPF 82 T250 125X25 C258 (3D | 0 | |||
| 588715-000 | TE Connectivity | OXSU-F3334-SE01 | 0 | |||
| 5-805887-3 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 858876-000 | TE Connectivity | GURO-SEPARATOR-SET-CASES | 0 | |||
| 8958873001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC99M0121-22-0/2 RoHS : Compliant | 0 | |||
| 058-8763-000 | ITT Interconnect Solutions | 588763000 | 0 | |||
| 058-8754-001 | ITT Interconnect Solutions | 588754001 | 0 | |||
| 10-035887-024 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| 4-805887-6 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 6-1633588-7 | TE Connectivity | CRIMPER, WIRE F .300 RoHS : Compliant |
| 0 | ||
| 5-1633588-7 | TE Connectivity | CRIMPER, WIRE F (.085 ) RoHS : Compliant |
| 0 | ||
| 10-035887-036 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| 10-035887-012 | Amphenol Industrial Operations | CAP | 0 | |||
| 2176588-7 | TE Connectivity | RLC73K 2E R698 1% 1K RL RoHS : Unknown | 0 | |||
![]() NexGen Digital | 1658871-1 | TE Connectivity | RoHS : Compliant | 6 | ||
![]() PEI Genesis | 85005887SW | SOURIAU-SUNBANK |
| 240 | ||
| S1071-158-.87-12 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G6 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G4 | SOURIAU-SUNBANK |
| 0 | |||
| 11472588-7 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G10 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G3 | SOURIAU-SUNBANK |
| 0 | |||
| 25887.9 | CONTA-CLIP Inc |
| 0 | |||
| 1135887G5 | SOURIAU-SUNBANK |
| 0 | |||
| ES7588-74H1A | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G7 | SOURIAU-SUNBANK |
| 0 | |||
| 20588.7 | CONTA-CLIP Inc |
| 0 | |||
![]() Powell Electronics | 5558872-1 | TE Connectivity | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 1,985 | |
| 5175887-1 | TE Connectivity | Connectors RoHS : Compliant |
| 818 | ||
| 8958873001 | TE Connectivity | Connectors RoHS : Compliant |
| 221 | ||
| 5175887-2 | TE Connectivity | Connectors RoHS : Compliant |
| 211 | ||
| 85005887SW | SOURIAU-SUNBANK | 851 NI Backnut #18 |
| 158 | ||
| 5-805887-3 | TE Connectivity | ANVIL, COMBINATION |
| 5 | ||
| 45887010 | Hartmann Electronic | AERO RELAY/CONTACTOR 45887010 |
| 3 | ||
| 805887-2 | TE Connectivity | Tools |
| 2 | ||
| 805887-1 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 2 | ||
| 6-1633588-7 | TE Connectivity | CRIMPER, WIRE F .300 RoHS : Compliant |
| 1 | ||
| 9-805887-4 | TE Connectivity | ANVIL, COMBINATION |
| 1 | ||
| 9-1633588-7 | TE Connectivity | CRIMPER, WIRE F .118 RoHS : Compliant |
| 1 | ||
| 588701-000 | TE Connectivity | Application Equipment General Purpose |
| 1 | ||
| 805887-7 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| 2-1633588-7 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 22658873 | HUBER+SUHNER | Conn SMA 0Hz to 18GHz 50Ohm ST Flange Mount RCP Go RoHS : Compliant |
| 0 | |
| 135887 | Maxwell Technologies | SUPERCAP ULTRACAP RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | CRCW08058871FT | INSTOCK | 15,000 | |||
![]() Avnet Abacus | B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | ||
| 1895887 | Phoenix Contact | MC 15 2G381 NZX15 MC152G381NZX15 (Alt: 1895887) RoHS : Compliant | 0 | |||
| 5558872-1 | TE Connectivity | Modular Connector RJ22 Jack 1 x 1 Port 4P4C Cat3 Through Hole Mount (Alt: 5558872-1) RoHS : Compliant | 0 | |||
| 5558872-1 | TE Connectivity | Modular Connector RJ22 Jack 1 x 1 Port 4P4C Cat3 Through Hole Mount (Alt: 5558872-1) RoHS : Compliant | 0 | |||
| 7-805887-9 | TE Connectivity | (Alt: 7-805887-9) RoHS : Not Compliant | 0 | |||
| 3-805887-0 | TE Connectivity | (Alt: 3-805887-0) RoHS : Not Compliant | 0 | |||
| 4-805887-5 | TE Connectivity | (Alt: 4-805887-5) RoHS : Not Compliant | 0 | |||
| 4-805887-4 | TE Connectivity | (Alt: 4-805887-4) RoHS : Not Compliant | 0 | |||
| 5-805887-3 | TE Connectivity | ANVIL COMBINATION (Alt: 5-805887-3) RoHS : Compliant | 0 | |||
| 5-805887-3 | TE Connectivity | ANVIL COMBINATION (Alt: 5-805887-3) RoHS : Compliant | 0 | |||
| 8958873001 | TE Connectivity | (Alt: 8958873001) RoHS : Compliant | 0 | |||
| 7-805887-2 | TE Connectivity | (Alt: 7-805887-2) RoHS : Not Compliant | 0 | |||
| 6-805887-0 | TE Connectivity | (Alt: 6-805887-0) RoHS : Not Compliant | 0 | |||
| DKTFM41MC5887 | Kyocera AVX Components | (Alt: DKTFM41MC5887) RoHS : Not Compliant | 0 | |||
| TNPW0805887RBEEN | Vishay Intertechnologies | SMD Chip Resistor 887 Ohm 01 200 mW 0805 2012 Metric Thin Film High Stability - Tape and Reel (Alt: TNPW0805887RBEEN) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10158875-101LF | Amphenol Corporation | (Alt: 10158875-101LF) RoHS : Compliant | 0 | ||
| TC358871XBG(NOK) | Toshiba America Electronic Components | (Alt: TC358871XBG(NOK)) RoHS : Compliant | 0 | |||
| 588742-000 | TE Connectivity | Cable Accessories Solder Sleeve Shield Terminator Cross-Linked Polyvinylidene Fluoride Transparent (Alt: 588742-000) RoHS : Not Compliant | 0 | |||
| TNPW0805887KBEEA | Vishay Intertechnologies | (Alt: TNPW0805887KBEEA) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | ||
| A5887H | Antenova M2M | (Alt: A5887H) RoHS : Compliant | 0 | |||
| AL5887-13 | Diodes Incorporated | WQFN52EP I2C SPI 36Channel RGB LED Driver (Alt: AL5887-13) RoHS : Compliant | 0 | |||
| AL5887Q-13 | Diodes Incorporated | WQFN52EP A I2C SPI 36Channel RGB LED Driver (Alt: AL5887Q-13) RoHS : Compliant | 0 | |||
| AL5887QJAZW52-13 | Diodes Incorporated | (Alt: AL5887QJAZW52-13) RoHS : Compliant | 0 | |||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | CRCW0805887RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | |
| CRCW08058873FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,340 | ||
| CRCW08058870FRT1 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,000 | ||
| TNPW08058871BR75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| TNPW0805-8.87K-.1%T-9R75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| 6588714-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 98 | ||
| 1588763-1 | TE Connectivity | IN STOCK SHIP TODAY | 30 | |||
![]() DB Roberts | 5887 | Heyco | 186-L-18-TIN-R/L | 0 | ||
| 10258871 | Pop Rivets | SSK63SSHR 5X1K | 0 | |||
| 5887-F-250-105-140 | RAF Electronic Hardware | 0 | ||||
| 5887-N-234-050-165 | RAF Electronic Hardware | 0 | ||||
| 5887-N-230-060-141 | RAF Electronic Hardware | WASHERS | 0 | |||
| 5887-N-218-105-140 | RAF Electronic Hardware | 0 | ||||
| 495887 | Essentra Components | 21 HEAT SHRINK TRANSPARENT POL | 0 | |||
![]() EBV Elektronik | E25GSFP28SRX 958873 | Intel Corporation | Intel Ethernet SFP28 SR Optic Single Pack (Alt: 958873) RoHS : Compliant | 0 | ||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 85005887LP | SOURIAU-SUNBANK | Connector 26482 |
| 20 | |
![]() Maritex | BQ25887RGER![]() | Texas Instruments | Battery Management ICs; BQ25887RGER; TEXAS INSTRUMENTS; 24; 1 mm; 4 mm; 4 mm RoHS : Compliant |
| 89 | |
![]() Master Electronics | 5558872-1 | TE Connectivity | MJ TE 4P W/0 PNL STOPS RoHS : Compliant |
| 3,007 | |
| 7000058873 | 3M | Splice Terminal 14-18AWG F 9.65mm Tin RoHS : Compliant |
| 850 | ||
| 702305887 | OMRON Industrial Automation | MSF4800S-14-0680-SB1 RoHS : Compliant |
| 0 | ||
| 7-2836588-7 | TE Connectivity | OC-080F120F-CRIMPTOOLINGKIT RoHS : Compliant |
| 0 | ||
| 7000058877 | 3M Interconnect | 7000058877 80620025264 72/PS/2R/STR.235-.145/ALL10AVE RoHS : Compliant |
| 0 | ||
| FFSD-04-S-58.87-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-805887-5 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 1-2058588-7 | TE Connectivity | Disp M-CPC FRONT 14P 0D Blue MOQ Reduction RoHS : Compliant |
| 0 | ||
| 7-805887-9 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 3-805887-0 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 4-805887-5 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 5-805887-9 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 4-805887-4 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 5-805887-3 | TE Connectivity | ANVIL COMBINATION RoHS : Compliant |
| 0 | ||
| 6-805887-8 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 1095887 | Phoenix Contact | Sensor Cables / Actuator Cables SAC4PM12MR/ 2,0680 FDN |
| 50 | |
| AXG62995887/1 | Axiom Manufacturing | AXIOM 16GB DDR4-2133 UDIMM TAA COMP |
| 0 | ||
| B65887E0000R049 | TDK Corporation | Ferrite Cores & Accessories RM14/I-N49 '+30%-20% |
| 0 | ||
| B65887E0250A041 | TDK Corporation | Ferrite Cores & Accessories RM14 N41 250 +3%-3% Sold as set RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C5887 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum N Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder. | 567 | ||
| PE3588-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug to SMB Plug Cable 72 Inch Length Using RG196 Coax., Radio frequency assembly SMB plug to SMB plug cable 72 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug cable 72 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3588-72, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3588-72 is built with RG196 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug cable 72 inch length using RG196 coax. |
| 148 | ||
| PE3C5887-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-100CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-100CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum N Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-12, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum N Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-150CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-150CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum N Male to SMA Male Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-200CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-200CM can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum N Male to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-24, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-36, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-36 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male to SMA Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-48, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-48 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum N Male to SMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-50CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-50CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Male to SMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-60, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-60 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3W15887 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.4mm Female Bulkhead to 2.92mm Male Cable Using Tinned RG405 Coax. PE3W15887 is a 2.4mm female bulkhead to 2.92mm male cable using RG405 Tinned coax. This Pasternack 2.4mm female bulkhead to 2.92mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female 2.4mm bulkhead to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15887 2.4mm female bulkhead to 2.92mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W05887 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Male Right Angle Cable Using Tinned RG405 Coax. PE3W05887 is a MMCX jack to SMA male right angle cable using RG405 Tinned coax. This Pasternack MMCX jack to SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack MMCX to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05887 MMCX jack to SMA male right angle cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W25887 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | 5558872-1 | TE Connectivity | MJ,TE,4P,W/0 PNL STOPS Connector Profile: Standard Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Connector Contact Density: Standard Modular Connector Style: Jack PCB Mount Orientation: Vertical Standard RJ Type Jacks & Plugs | Rj22 Connector | Part Number: 5558872-1 | Internal Number: 5558872-1 | Alias Number: A08646-000 | TE Connectivity RoHS : Compliant |
| 3,079 | |
| 1658871-1 | TE Connectivity | XFP CAGE ASSY W/ INSULATING TA Pluggable Form Factor: XFP Pluggable I/O Product Type: Cage Assembly Sealable: Yes Circuit Application: Signal Operating Temperature Range: -10 – 70 °C XFP Cage Assembly | High Speed I/o | Part Number: 1658871-1 | Internal Number: 1658871-1 | TE Connectivity RoHS : Compliant |
| 762 | ||
![]() Vyrian | MAX5887EGK-D![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant | 10,353 | ||
| CSD58872Q5D | Texas Instruments | 8,820 | ||||
MSP430FR5887IRGCT![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC64 RoHS : Compliant | 8,428 | |||
| PQ25887RGET | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PQCC24 | 5,487 | |||
| MAX5887EGK/GG8 | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.011us Settling Time RoHS : Not Compliant | 5,457 | |||
| 2858878 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 5,343 | |||
| MAX5887EGK+TD | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Compliant | 5,308 | |||
MSP430FR5887IRGCR![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC64 RoHS : Compliant | 5,137 | |||
| CSD58879Q3D | Texas Instruments | 5,048 | ||||
| 5962-01-158-8745 | Texas Instruments | Decade Counter, Synchronous, Bidirectional, TTL, CDIP16 RoHS : Not Compliant | 4,809 | |||
MAX5887EGK-TD![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant | 4,363 | |||
| BQ25887EVM | Texas Instruments | 3,399 | ||||
| CSD58873Q3D | Texas Instruments | 3,390 | ||||
MSP430FR5887IPMR![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,091 | |||
| PYD1588/7656 | Excelitas Technologies | Pyroelectric Sensor | 396 | |||
![]() Win Source Electronics | BQ25887RGER![]() | Texas Instruments | IC BAT BALANCER LI-ION 2C 24VQFN RoHS : Compliant |
| 6,730 | |
| TC358870XBG | Toshiba America Electronic Components | RoHS : Compliant |
| 6,000 | ||
| TC358870XBG(NOK) | Toshiba America Electronic Components | Interface - Specialized HDMI Interface Brdge |
| 4,923 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |