600-37SC-R Price, Distributor, Stock

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMC Plug to SMC Plug Right Angle Cable 60 Inch Length Using RG188 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 60 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 60 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE3600-60, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE3600-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3600-60 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 60 inch length using RG188 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

283

PE91600

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: 45 Degree, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. RF Adapter, 45 Degree Angle TNC plug to TNC jack 18GHz VSWR1.2. Tnc male to tnc female adapter part number PE91600 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. The RF adapter has a 50 Ohm impedance and maximum VSWR of 1.2:1. This RF adapter has a male to female gender configuration which provides easier connections in tighter spaces. Our tnc to tnc adapter is an in-series coaxial adapter design. This 50 Ohm tnc adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. tnc male to tnc female adapter is one of the many RF components that ship same day as they are ordered. PE91600 male tnc to female tnc adapter has a 45 degree body. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Our tnc male to tnc female adapter PE91600 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This high-quality adapter from Pasternack has a tnc to tnc connector is made from passivated stainless steel. Our tnc radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This tnc to tnc radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz radio frequency adapter that meets your requirements.

1 : $267.99
10 : $262.63
25 : $257.27
100 : $251.91

PEWGS6009

Pasternack Enterprises

Key Specifications. Waveguide Size WR-62 Flange Size Flange Type Flange Group UG-419/U Square Cover Grooved Flange Frequency Band Ku band Minimum Frequency 12.4 GHz Maximum Frequency 18 GHz Impedance 50 Ohms Maximum VSWR 1.1:1 Switch Design SPDT DPDT Switching Action Break Before Make Actuator Type Latching Actuator Additional Actuator Feature 1 TTL Logic Additional Actuator Feature 2 Self Cut Off Additional Actuator Feature 3 Window Indicator Additional Actuator Feature 4 Manual Override. WR-62 Waveguide Electromechanical Relay SPDT/DPDT Latching Switch, Ku Band 18 GHz, 2,000 Watts, UG-419/U Square Cover, 28V, TTL Logic., WR62 waveguide electromechanical relay switch PEWGS6009 is part of Pasternack’s international ISO 9001:2008 certified facility same-day shipping program. Manufactured as SPDT and interchangeable DPDT settings, WR62 electromechanical waveguides are relay switches with latching actuators. Pasternack innovative SPDT/DPDT WR62 chem film-plated electromechanical switches are always in stock and have a 2,000 Watt maximum input power rating with a 70 KW peak power rating. 2,000 watts latching aluminum waveguide relay switch PEWGS6009 can operate in the ultra-wide Ku band frequency range of 12.4 GHz to 18 GHz. 18 GHz max WR62 2,000 watt waveguide electromechanical relay switch that has a typical actuating voltage of 28V is sold by Pasternack who has been in business since 1972. Electromechanical relay 28V 2,000 W max power Ku band waveguide has high UG-419/U Square Cover grooved flanges ports. These WR62 18 GHz aluminum body waveguide relay switches plated in chem film produce a maximum actuating current of 1,000mA at a 28 V nominal operating voltage. 1,000mA 2,000 W waveguide electromechanical latching relay switch PEWGS6009 by Pasternack has an operating range of 21 V to 32 V. The patented motor drive housings for PEWGS6009 Ku band electromechanical relay switches at 28 V with manual override control TTL-logic latching actuators support a removable cover for window indicator and a self cut off for the position indicator. Our 2,000 W max input power 21 V to 32 V waveguide relay switch PEWGS6009 with UG-419/U Square Cover flanges has an impressive impedance of 50 Ohms. Pasternack WR62 SPDT/DPDT waveguide relay switch that requires a +28 Vdc nominal bias voltage has a -40°C to 85°C operating temperature range. 18 GHz aluminum waveguide electromechanical relay switch with 50 Ohms impedance can function under 30psig maximum operating pressure and is fitted with a fully weatherized package of 0-100% humidity. PEWGS6009 Electromechanical WR62 latching waveguide switch by Pasternack is a tough aluminum waveguide component that has 250,000k cycles minimum of cold switching mechanical life. Ku band Pasternack SPDT/DPDT Square Cover UG-419/U flanged waveguide relay switch with 1.144 lbs of weight, is 2.11 in. wide, 4.3 in. long, and 2.11 in. high. WR62 28 Vdc 1,000mA 12.4 GHz to 18 GHz electromechanical relay switch with maximum 1.1:1 VSWR (voltage standing wave ratio) has Pasternack’s expert technical support always at hand. CAD drawings with dimensions and specs on a downloadable PEWGS6009 PDF datasheet are available on the product page for this WR62 2,000 W 18 GHz waveguide electromechanical relay switch with Square Cover UG-419/U flanges. Industry-leading electromechanical polarity Ku band latching waveguide that can function under 30psig and temperatures up to 85°C, ships to anywhere globally available the same day. Pasternack’s 1.1:1 VSWR WR62 waveguide relay actuating switch has a quick-connect circular dc connector with mate providing 0.1 dB maximum insertion loss and in-stock consistently for your convenience. Electronic warfare and countermeasures, microwave radio, VSAT, space systems, are just a few of the important applications that these Pasternack PEWGS6009 2,000 W WR62 18 GHz Ku band waveguides chem films are used in. Ordering is easy, just go online or call our knowledgeable sales team by phone and get this WR62 SPDT/DPDT latching switch with 0.1 dB insertion loss and 60 dB of minimum isolation. To summarize, the quality and availability of Pasternack WR62 break before make waveguide electromechanical latching relay switch with 67,000,000 ns typical switching speed.

1 : $7,220.0
5 : $6,931.2
10 : $6,642.4

PE70A6000

Pasternack Enterprises

Key Specifications, Design: TTL Controlled, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 2:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 60 dB. 60 dB With 10 Bit Programmable TTL Controlled Attenuator, SMA Female To SMA Female, 0.06 dB Steps From 500 MHz To 18 GHz. PE70A6000 is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE70A6000 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 60 dB with 10dB step sizes. Our programmable RF attenuator has frequency range of 500 MHz to 18 GHz and a maximum VSWR of 2. This adjustable SMA attenuator is rated to 1 Watt at the stated attenuation. Our attenuator PE70A6000 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $10,700.0
5 : $10,272.0
10 : $9,844.0

PE3W10600

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SSMA Female to SMA Female Bulkhead Cable Using RG405 Coax. PE3W10600 is a SSMA female to SMA female bulkhead cable using RG405 coax. This Pasternack SSMA female to SMA female bulkhead cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SSMA to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10600 SSMA female to SMA female bulkhead cable assembly is constructed with RG405 coax.

PE34600

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BananaConnector Gender 1PlugConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 10Connector Series 2BananaConnector Gender 2PlugConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG316/URF Cable TypeRG316RF Cable Impedance50. Banana Plug to Banana Plug Cable Using RG316 Coax. Very low frequency equipment test lead cable assembly PE34600 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with RG316 cable and the impedance is 50 Ohm. PE34600 Banana plug to banana plug test equipment lead using RG316 cable. Pasternack banana to banana RG316 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and RG316 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

PE3W15600/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Female Bulkhead Cable Using RG141 Coax with HeatShrink. PE3W15600/HS is a MCX plug right angle to SMA female bulkhead cable using RG141 coax. This Pasternack MCX plug right angle to SMA female bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15600/HS MCX plug right angle to SMA female bulkhead cable assembly is constructed with RG141 coax.

PE3W16009LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMC Plug Cable Using RG405 Coax, LF Solder. PE3W16009LF is a SMA male to SMC plug cable using RG405 coax. This Pasternack SMA male to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to plug SMC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16009LF SMA male to SMC plug cable assembly is constructed with RG405 coax.

PE3W22600

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMA Female Cable Using RG188 Coax. PE3W22600 is a BMA jack 2 hole flange to SMA female cable using RG188 coax. This Pasternack BMA jack 2 hole flange to SMA female cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA 2 hole flange to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22600 BMA jack 2 hole flange to SMA female cable assembly is constructed with RG188 coax.

PE36007LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Plug Cable Using RG178 Coax with HeatShrink, LF Solder, RoHS. PE36007LF/HS is a SMA female bulkhead to MMCX plug cable using RG178 coax. This Pasternack SMA female bulkhead to MMCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMA bulkhead to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36007LF/HS SMA female bulkhead to MMCX plug cable assembly is constructed with RG178 coax.

PE3C0600

Pasternack Enterprises

PE3W16003

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Cable Using LMR-400-FR Coax. PE3W16003 is a N male right angle to TNC male cable using LMR-400-FR coax. This Pasternack N male right angle to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16003 N male right angle to TNC male cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16005/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male to N Male Cable Using LMR-195 Coax with HeatShrink. PE3W16005/HS is a TNC male to N male cable using LMR-195 coax. This Pasternack TNC male to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16005/HS TNC male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12600

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Cable Using RG405 Coax. PE3W12600 is a QMA male to QMA male cable using RG405 coax. This Pasternack QMA male to QMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. Our male QMA to male QMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12600 QMA male to QMA male cable assembly is constructed with RG405 coax.

PE3W16002

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. NEX10 Male to SMA Female Cable Using SPP-250-LLPL Coax. PE3W16002 is a NEX10 male to SMA female cable using SPP-250-LLPL coax. This Pasternack NEX10 male to SMA female cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm SMA for connector 2. Our male NEX10 to female SMA cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W16002 NEX10 male to SMA female cable assembly is constructed with SPP-250-LLPL coax.

Relay Specialties

E5766-000032

Vimex International Corporation

VIMEX Part

1 : $0.62
50 : $0.59
100 : $0.55
250 : $0.52
500 : $0.48

1,200

CM1360-0

Comus International

Differential Angle : 30 Deg Ma

1 : $9.52
5 : $9.17
10 : $8.53
25 : $7.98
50 : $7.5

203

WN6003W-8

Panasonic Electronic Components

PEWA-IWSD WALL PLATE, FULL-COL

1 : $2.4
5 : $2.1
10 : $1.87
25 : $1.68
49 : $1.53

113

T6J-600A

OptiFuse

Industrial Fuse; 600 A Class J; Time-Delay; 203mm L 600 VAC / 500 VDC; Blade

1 : $391.82
10 : $362.8
25 : $337.78
50 : $315.99
100 : $296.83

100

301-081-1600

BlockMaster Blocks

TERMINAL BLOCK

1 : $1.37
5 : $1.24
10 : $1.14
25 : $1.05
50 : $1.05

100

301-051-1600

BlockMaster Blocks

TERMINAL BLOCK

1 : $0.81
5 : $0.73
10 : $0.67
25 : $0.62
50 : $0.62

F6T-600A

OptiFuse

Industrial Fuse; 600 A Class T; Fast-Acting; 101.2mm 600 VAC / 300 VDC; Blade

1 : $357.73
10 : $331.24
25 : $308.39
50 : $288.5
100 : $271.01

F3T-600A

OptiFuse

Industrial Fuse; 600 A Class T; Fast-Acting; 77.7mm L 300 VAC / 160 VDC; Blade

1 : $294.82
10 : $272.98
25 : $254.16
50 : $237.76
100 : $223.35

TH593036000

Johnson Electric Group

T-H SWITCH GUARD (TH31-925)

1 : $7.31
5 : $7.04
10 : $6.55
25 : $6.13

2K-6600-039

Hi-G Relays

HI-G RELAY (CECC 16101-007-29-

1 : $138.24
10 : $117.51
25 : $104.45
50 : $94.01
100 : $85.46

TH493060000

Johnson Electric Group

T-H BEZEL (TH65-920)

1 : $3.08
5 : $2.96

60001-53

Deltrol Controls

COIL

1 : $26.67

WN6009W-8

Panasonic Electronic Components

PEWA-IWSD WALL PLATE, FULL-COL

1 : $11.4

M50100THA1600

Crydom Inc

CRYDOM Power Modules
RoHS : Compliant

1 : $157.35
5 : $154.9
10 : $147.52
25 : $144.17

60010-83

Deltrol Controls

SOLENOID

1 : $66.67

TE Connectivity

BMC-Q1EY0600H

TE Connectivity

BMC-Q 0402 600R 25% Tol. High Current Impedance: 600 Ω Current Rating (Max): 200 mA DC Resistance: .7 Ω Package Size Code: 0402 Product Length: .039 in Automotive Grade Multilayer Chip Bead | 600 Ω 200 mA .7 Ω 0402 | Part Number: BMC-Q1EY0600H | Internal Number: 2-2176742-3 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.06
2,500 : $0.06
1,000 : $0.06
500 : $0.06
250 : $0.06
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.07

19,980

NB55486001

TE Connectivity

BICAP-NO.3-0-40MM Wall Type: Dual Wall Adhesive Requirement: Adhesive Precoat Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Dual Wall Adhesive Precoat | End Cap | Part Number: NB55486001 | Internal Number: NB55486001 | TE Connectivity
RoHS : Compliant

20,000 : $0.23
10,000 : $0.29
5,000 : $0.39
2,000 : $0.52
1,000 : $0.78
100 : $0.93

4,985

8PCV-06-006

TE Connectivity

8PCV-06-006=#8 TRIBARRIER Number of Positions: 6 Barrier Strip Style: Tri-Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .438 in Barrier Strip | 6 Tri-Barrier Printed Circuit Pin Wire-to-Board | Part Number: 8PCV-06-006 | Internal Number: 9-1437657-8 | .438" | TE Connectivity
RoHS : Compliant

2,500 : $6.66
1,000 : $6.84
500 : $7.02
250 : $7.2
100 : $7.38
50 : $7.56
25 : $7.74
10 : $7.92
1 : $8.1

3,918

1600914-1

TE Connectivity

HARDWARE KIT MBXL, PANEL MOUNT Connector Hardware Accessory Type: Hardware Kit Primary Product Material: Stainless Steel Operating Temperature (Max): 221 °F Operating Temperature (Max): 105 °C Operating Temperature Range: -67 – 221 °F Hardware Kit Stainless Steel | Connector Hardware | Part Number: 1600914-1 | Internal Number: 1600914-1 | TE Connectivity
RoHS : Compliant

1,000 : $5.02
500 : $5.17
250 : $5.33
100 : $5.5
50 : $5.67
1 : $6.22

1,000

1-6450160-0

TE Connectivity

MBXL R/A RCPT 2P+24S+2P PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Co-Planar Number of Positions: 28 PCB Mount Receptacle Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 1-6450160-0 | Internal Number: 1-6450160-0 | Alias Number: 1287814 | TE Connectivity
RoHS : Compliant

1,000 : $7.62
500 : $7.84
250 : $8.08
100 : $8.36
50 : $8.6
1 : $9.44

301

1-5499160-0

TE Connectivity

A/L UNIV HDR 50P VERT SHT LAT Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5499160-0 | Internal Number: 1-5499160-0 | TE Connectivity
RoHS : Compliant

1,000 : $8.97
500 : $9.22
250 : $9.51
100 : $9.82
50 : $10.11
1 : $11.1

D-600-0083

TE Connectivity

1 : $286.72

T1990160000-009

TE Connectivity

H16BPR-KDBM-EMC-C Connector Cover Type: Protective Cover Primary Product Color: Black Primary Product Material: Die Cast Aluminum Operating Temperature (Max): 125 °C Operating Temperature (Max): 257 °F Protective Cover Black | Connector Cap & Cover | Part Number: T1990160000-009 | Internal Number: T1990160000-009 | Die Cast Aluminum | TE Connectivity
RoHS : Compliant

10 : $36.79
1 : $40.88

EL7660-000

TE Connectivity

TMS-CT-50M-3/32-OUT-9 Primary Product Color: White Printable Tubing Grade: Military Printable Tubing Type: Continuous Recovered Inside Diameter (Max): .031 in Recovered Inside Diameter (Max): .8 mm White Military Continuous .031" | Continuous Tube Military Grade Tms-Ct | Part Number: EL7660-000 | Internal Number: EL7660-000 | TE Connectivity
RoHS : Compliant

50 : $6.27
25 : $6.64
10 : $7.01
1 : $7.38

FN2220-600-99-C2222-R99

TE Connectivity

FN2220-600-99-C2222-R99 Current Rating: 600 A Operating Voltage: 1000 VDC Input Termination Type: Busbar Output Termination Type: Busbar Ultra-Compact Dc-Busbar Emc/rfi Filter For Ev Charging Application | 600 A 1000 VDC Busbar | Part Number: FN2220-600-99-C2222-R99 | Internal Number: 821952-SF | TE Connectivity
RoHS : Compliant

1 : $1,716.62

T1420160000-000

TE Connectivity

H16B-AG-BO Hood & Base Connector Product Type: Base Housing Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1420160000-000 | Internal Number: T1420160000-000 | TE Connectivity
RoHS : Compliant

25 : $19.13
10 : $20.6
1 : $22.07

FN3359-600-99

TE Connectivity

FN3359-600-99 Current Rating: 600 A Input Termination Type: Busbar Output Termination Type: Busbar Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters & High-Current Emc/rfi Filter 2500 A | 600 A Busbar DELTA (3 wire + ground) | Part Number: FN3359-600-99 | Internal Number: 800967-SF | TE Connectivity
RoHS : Compliant

1 : $6,562.24

CJP600J3R3J

TE Connectivity

CJP 600W 3R3 5% Lead Resistance Value: 3.3 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 3.3 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J3R3J | Internal Number: 2176511-5 | TE Connectivity
RoHS : Compliant

1 : $186.47

CJP600J68RJ

TE Connectivity

CJP 600W 68R 5% Lead Resistance Value: 68 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 68 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J68RJ | Internal Number: 2-2176511-1 | TE Connectivity
RoHS : Compliant

1 : $186.47

CJP600J820RJ

TE Connectivity

CJP 600W 820R 5% Lead Resistance Value: 820 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 820 Ω Wire Wound 5 % Power Resistor | Part Number: CJP600J820RJ | Internal Number: 3-2176511-4 | TE Connectivity
RoHS : Compliant

1 : $186.47

Teledyne HiRel

5962-8776001B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001M2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001MSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006BEA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

M38510/06006B2C

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

M38510/06006BFA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-8776001MRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006B2A

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

5962-8776001SA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

PWCR1206-UK-1600FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;160R;�1%
RoHS : Compliant

HPCR0805-U-3600FT

VENKEL LTD

High Power CR;0805;1/3W;360R;�1%
RoHS : Compliant

HPTF0805-RN-3600FT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;360R;�1%
RoHS : Compliant

HPTF0805-RP-3600BT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;360R;�0.1%
RoHS : Compliant

HPTF0805-TE-5600CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;560R;�0.25%
RoHS : Compliant

HPTF1206-TP-1600FT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;160R;�1%
RoHS : Compliant

HPTF1206-UC-3600DT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;360R;�0.5%
RoHS : Compliant

HPTF1210-UC-1600CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;160R;�0.25%
RoHS : Compliant

HPTF1210-UN-5600FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;560R;�1%
RoHS : Compliant

HPTF2010-UN-1600UT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;160R;�0.01%
RoHS : Compliant

HPTF2512-WN-3600FT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�10PPM;360R;�1%
RoHS : Compliant

MEHF0204-TC-1600FT

VENKEL LTD

High Frequency MELF;0204;1/4W;�50PPM;160R�1%
RoHS : Not Compliant

MELFC0102-YE-3600CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;360R;�0.25%
RoHS : Compliant

MELFC0102-YZ-3600DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;360R;�0.5%
RoHS : Compliant

MELFC0207-VC-1600FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;160R;�1%
RoHS : Compliant

Vyrian

36003600

Wurth Elektronik

Cabinets/Frames

18,237

QSB60024S32

XP Power

DC-DC Regulated Power Supply Module, 1 Output, 608W, Hybrid
RoHS : Compliant

10,512

DSC6001MI2A-060.0000

Microchip Technology Inc

CMOS Output Clock Oscillator, 60MHz Nom
RoHS : Compliant

8,919

DSC6001CI2A-036.0000

Microchip Technology Inc

CMOS Output Clock Oscillator, 36MHz Nom
RoHS : Compliant

7,350

BRD-05-60006-00

Broadcom Limited

5,596

05-60006-00

Broadcom Limited

4,473

551600236-001/NOPB

Texas Instruments

Switching Regulator, Voltage-mode, 5.5A, 1000kHz Switching Freq-Max, PDSO8

4,304

XCV600-4FG600I

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

4,001

XCV600-6FG600C

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

3,493

XCV600-4FG600C

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

3,109

XCV600-6FG600I

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

2,524

XCV600-5FG600C

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

1,763

XCV600-5FG600I

AMD Xilinx

Field Programmable Gate Array, 15552-Cell, CMOS, PBGA600
RoHS : Not Compliant

1,244

CCT406393-600-36-00

TDK Corporation

Current Sensor
RoHS : Compliant

615

XLH736002.096000I

Renesas Electronics Corporation

HCMOS Output Clock Oscillator, 2.096MHz Nom

486

Wuhan P&S

SF1600-TAP

Vishay Intertechnologies

1600V,1A,Ultrafast Avalanche Diode
RoHS : Compliant

1 : $0.61
100 : $0.22
500 : $0.16
1,000 : $0.15

1,095,000

MCH6001-TL-E

onsemi

RoHS : Compliant

1 : $0.55
100 : $0.36
500 : $0.29
1,000 : $0.27

12,000

71600-026LF

Amphenol FCi

IDC Receptacle,Double row,26 P,2.54mm
RoHS : Compliant

1 : $1.4
100 : $1.36
500 : $1.33
1,000 : $1.3

1,080

NXH600N105H7F5S1HG

onsemi

F5+BP-PIM 250kW Solar 1500VDC INPC Inverter with HPS DBC - Agile#N07L0
RoHS : Compliant

1 : $856.62
100 : $546.78
500 : $450.86
1,000 : $414.5

960

BTA25-600CW3G

Littelfuse Inc

Triacs Silicon Bidirectional Thyristors
RoHS : Compliant

1 : $1.42
100 : $1.14
500 : $1.05
1,000 : $0.99

550

STUSB4600QTR

STMicroelectronics

1 : $1.13
100 : $1.13
500 : $1.13
1,000 : $1.13

T435-600B-TR

STMicroelectronics

4 A Triacs
RoHS : Compliant

1 : $1.48
100 : $0.5
500 : $0.46
1,000 : $0.45

MICROFJ-SMA-60035-GEVB

onsemi

Evaluation board

1 : $1,167.76
100 : $745.38
500 : $614.61
1,000 : $565.05

600-37SC-R Distributor

Link URL