610TF-R24M-R Price, Distributor, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Female Bulkhead to SMA Male Right Angle Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-NF-BH-LP N type bulkhead cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-NF-BH-LP type N to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable is a female to male coax assembly, PE3C6216-100CM, can also be known as a low PIM TC-SPP250-NF-BH-LP N type jack to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-NF-BH-LP type N jack to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6216-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-NF-BH-LP N cable assembly is manufactured with TC-SPP250-NF-BH-LP N type to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6216-100CM can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-NF-BH-LP type N female bulkhead cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-NF-BH-LP type N jack bulkhead to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-NF-BH-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female bulkhead to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE7316-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 7/16 DIN Female To N Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7316-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7316-10 10 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7316-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $635.0
10 : $609.6
25 : $584.2

PE7610-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30dB RF fixed attenuator 10W, DC to 4GHz, BNC male to BNC female. The PE7610-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.25:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with BNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7610-30 attenuator is rated for up to 4 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum BNC connector with gold-plated brass contact. Our fixed RF attenuator PE7610-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $131.99
10 : $129.35
25 : $126.71
100 : $124.07

PE3VNA2610-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm NMD, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 24 inches. VNA Ruggedized Test Cable 3.5mm Female to 3.5mm NMD Female 27GHz 24 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm female to 3.5mm NMD female 27GHz 24 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm female to 3.5mm NMD female 27GHz 24 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm NMD cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 3.5mm cable connection on one end and 3.5mm NMD cable connection on the other. Our test 3.5mm to 3.5mm NMD cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm NMD cable is a female to female coax assembly, PE3VNA2610-24, can also be known as a test 3.5mm jack to 3.5mm NMD jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm NMD jack cable assembly PE3VNA2610-24 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm NMD cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 27 GHz maximum frequency 3.5mm female to 3.5mm NMD female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3VNA2610-24 can also be used in the other direction and will be 3.5mm NMD female to 3.5mm female cable assembly if the opposite connectivity is required. Test 3.5mm jack to 3.5mm NMD jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm NMD cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm female to 3.5mm NMD female 27GHz 24 inch length, RoHS.

1 : $1,680.0
25 : $1,596.0
50 : $1,512.0
100 : $1,444.8

PE3C5866-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.1/9.5 Mini DIN Male to QMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and QMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to QMA cable is a male to male coax assembly, PE3C5866-100CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to QMA plug cable assembly PE3C5866-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5866-100CM can also be used in the other direction and will be QMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to QMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3C7286-100CM

Pasternack Enterprises

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3W06100

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using LMR-195-FR Coax. PE3W06100 is a SMA male to MCX plug cable using LMR-195-FR coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06100 SMA male to MCX plug cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W06108/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG214 Coax with HeatShrink. PE3W06108/HS is a C female to N female cable using RG214 coax. This Pasternack C female to N female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm N for connector 2. Our female C to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06108/HS C female to N female cable assembly is constructed with RG214 coax.

PE7610-40

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40dB RF fixed attenuator 10W, DC to 4GHz, BNC male to BNC female. The PE7610-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.25:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with BNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7610-40 attenuator is rated for up to 4 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum BNC connector with gold-plated brass contact. Our fixed RF attenuator PE7610-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $153.99
10 : $150.91
25 : $147.83
100 : $144.75

PE3C10610

Pasternack Enterprises

PE3W16102/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using RG223 Coax with HeatShrink. PE3W16102/HS is a SMA male to TNC female bulkhead cable using RG223 coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16102/HS SMA male to TNC female bulkhead cable assembly is constructed with RG223 coax.

PE3W25610/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMB Plug Cable Using PE-P086HF Coax with HeatShrink. PE3W25610/HS is a SMP female right angle to SMB plug cable using PE-P086HF coax. This Pasternack SMP female right angle to SMB plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMB for connector 2. SMP right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25610/HS SMP female right angle to SMB plug cable assembly is constructed with PE-P086HF coax.

PE3W18610LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3W18610LF/HS is a N male to UHF male cable using LMR-195-UF coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18610LF/HS N male to UHF male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1610/BK

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMB Plug to SMB Plug Cable Using LMR-195 Coax, LF Solder., Pasternack’s PE3C1610/BK SMB plug to SMB plug RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a SMB cable connection on the other. Our SMB to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1610/BK can also be known as a SMB male to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1610/BK RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMB plug to SMB plug cable has a maximum VSWR of 1.4:1. This PE3C1610/BK SMB male to SMB male cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMB male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to SMB RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3C6103

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. 2.92mm Female to SMP Female Cable Using PE-SR047FL Coax., Radio frequency assembly 2.92mm female to SMP female cable using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm female to SMP female cable using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMP cable connection on the other. Our 2.92mm to SMP cable assemblies have a female gender on end 1 and female on end 2. This 2.92mm to SMP cable is a female to female coax assembly, PE3C6103, can also be known as a 2.92mm jack to SMP jack cable assembly and will be shipped same-day as it is purchased. 2.92mm jack to SMP jack cable assembly PE3C6103 is built with PE-SR047FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency 2.92mm female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6103 can also be used in the other direction and will be SMP female to 2.92mm female cable assembly if the opposite connectivity is required. 2.92mm jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm female to SMP female cable using PE-SR047FL coax.

Teledyne HiRel

5962-8766101XA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-9161001M3A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS
RoHS : Not Compliant

5962-8766105YC

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 200 NS ACCESS TIME

5962-8766108XA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8872610LA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8766106YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 250 NS ACCESS TIME
RoHS : Not Compliant

5962-8766106YC

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 250 NS ACCESS TIME

5962-8766104YC

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 170 NS ACCESS TIME

5962-8766107XA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 300 NS ACCESS TIME
RoHS : Not Compliant

5962-8766108YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-89561012A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE
RoHS : Not Compliant

5962-8766103YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 150 NS ACCESS TIME
RoHS : Not Compliant

5962-87761012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8766107YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 300 NS ACCESS TIME
RoHS : Not Compliant

5962-8766102YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

Win Source Electronics

TPS61023DRLT

Texas Instruments

IC REG BOOST ADJ 3A SOT563 / Boost Switching Regulator IC Positive Adjustable 2.2V 1 Output 3A SOT-563, SOT-666
RoHS : Compliant

1,790 : $0.1679
1,335 : $0.1873
1,035 : $0.1938
750 : $0.2002
485 : $0.2067
200 : $0.2519

122,150

DFE201610E-100M=P2

Murata Manufacturing Co Ltd

FIXED IND 10UH 650MA 780MOHM SMD
RoHS : Compliant

2,930 : $0.1025
2,345 : $0.1067
1,805 : $0.1109
1,260 : $0.1192
815 : $0.1234
380 : $0.1317

60,000

SBCP56-10T1G

onsemi

TRANS NPN 80V 1A SOT-223
RoHS : Compliant

1,665 : $0.1807
1,245 : $0.2016
960 : $0.2085
700 : $0.2155
450 : $0.2224
185 : $0.2711

50,000

FDC610PZ

Fairchild Semiconductor Corporation

MOSFET P-CH 30V 4.9A SSOT-6
RoHS : Compliant

1,380 : $0.2435
1,035 : $0.2715
800 : $0.2809
580 : $0.2903
375 : $0.2996
155 : $0.3651

36,770

BQ296107DSGT

Texas Instruments

IC BATTERY PROTECTION 8WSON
RoHS : Compliant

800 : $0.4216
640 : $0.4387
495 : $0.4558
345 : $0.4901
225 : $0.5072
105 : $0.5415

10,890

LT6105CDCB#TRPBF

Linear Technology

IC OPAMP CURR SENSE 100KHZ 6DFN / SP Amp Current Sense Amp Single 36V Automotive 6-Pin DFN EP T/R
RoHS : Compliant

125 : $2.7
93 : $3.0116
72 : $3.1154
53 : $3.2192
34 : $3.323
14 : $4.0499

9,940

LM74610QDGKRQ1/LM74610QDGKTQ1

Texas Instruments

270 : $1.1182
215 : $1.1637
170 : $1.2091
120 : $1.3
75 : $1.3455
35 : $1.4364

9,130

SIR610DP-T1-RE3

Vishay Huntington

77 : $3.9098
58 : $4.361
45 : $4.5113
33 : $4.6617
21 : $4.8121
9 : $5.8647

6,010

LT6105CMS8#TRPBF

Linear Technology

IC OPAMP CURR SENSE 100KHZ 8MSOP
RoHS : Compliant

30 : $10.173
24 : $10.5865
19 : $11.0
13 : $11.8271
9 : $12.2407
4 : $13.0677

4,760

LMZ23610TZE/NOPB

Texas Instruments

10A SIMPLE SWITCHER Power Module With 36-V Maximum Input Voltage and Current Sharing
RoHS : Compliant

11 : $29.8981
8 : $33.3479
6 : $34.4978
5 : $35.6478
3 : $36.7977
2 : $44.8472

4,710

LT8610IMSE

Analog Devices Inc

IC REG BUCK ADJ 2.5A 16MSOP

37 : $8.2097
28 : $9.157
22 : $9.4728
16 : $9.7885
10 : $10.1043
5 : $12.3146

4,225

PT61017PEL

Bourns Inc

PULSE XFMR 1CT:1CT 350UH / 350μH LAN 10/100 Base-T Pulse Transformer 1CT:1CT Surface Mount
RoHS : Compliant

405 : $0.7498
300 : $0.8363
235 : $0.8651
170 : $0.8939
110 : $0.9228
45 : $1.1246

3,600

AT93C46-10SU-2.7R

Atmel Corporation

1,110 : $0.304
890 : $0.3163
685 : $0.3286
480 : $0.3534
310 : $0.3657
145 : $0.3904

3,000

LTC3610EWP#PBF

Linear Technology

IC REG BUCK ADJ 12A 64QFN / Conv DC-DC 4V to 24V Synchronous Step Down Single-Out 0.6V to 27.72V 12A 64-Pin QFN EP Tube
RoHS : Compliant

9 : $33.5611
7 : $37.4336
6 : $38.7244
4 : $40.0152
3 : $41.306
1 : $50.3417

1,800

LT8610ACHMSE#PBF

Analog Devices Inc

IC REG BUCK ADJ 3.5A 16MSOP / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A 16-TFSOP (0.118", 3.00mm Width) Exposed Pad
RoHS : Compliant

21 : $16.0588
16 : $17.9118
13 : $18.5294
9 : $19.1471
6 : $19.7648
3 : $24.0882

1,760

610TF-R24M-R Distributor

Link URL