64SPJ-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

700

PE3C1064/SP-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-48 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

1 : $383.99
25 : $364.79
50 : $345.59
100 : $330.23

140

PE3C1064/SP-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 12 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 12 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-12 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 12 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

1 : $376.99
25 : $358.14
50 : $339.29
100 : $324.21

140

PE3C1064/SP-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-60 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

1 : $383.99
25 : $364.79
50 : $345.59
100 : $330.23

140

PE3C1064/SP-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 36 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 36 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 36 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-36 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 36 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

1 : $380.99
25 : $361.94
50 : $342.89
100 : $327.65

140

PE3C1064/SP-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 24 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 24 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 24 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-24 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 24 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder.

1 : $380.99
25 : $361.94
50 : $342.89
100 : $327.65

140

PE3W03264/SP-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 100 cm length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 100 cm length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-100CM can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-100CM can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3C6464/SP

Pasternack Enterprises

PE3W03264/SP-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 24 inch length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 24 inch length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-24 can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-24 can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3W03264/SP-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 48 inch length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 48 inch length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-48 can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-48 can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3W03264/SP-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 200 cm length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 200 cm length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-200CM can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-200CM can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE3W03264/SP-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 36 inch length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 36 inch length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-36 can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-36 can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3W19964/SP

Pasternack Enterprises

PE9864/SF-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-430, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.4, Frequency, Min: 1.7 GHz, Frequency, Max: 2.6 GHz. WR-430 Waveguide Standard Gain Horn Antenna Operating from 1.7 GHz to 2.6 GHz with a Nominal 20 dB Gain SMA Female Input. The PE9864/SF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-430 input and a waveguide to coaxial transition adapter. Our WR-430 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-430 standard gain horn antenna with an SMA female input has a minimum frequency of 1.7 GHz and a maximum frequency of 2.6 GHz. Pasternack’s PE9864/SF-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.4 degrees at 3 dB. This antenna has a length of 48 inches, a width of 24 inches, and a weight of 29.5 lbs. This WR-430 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $5,960.0
5 : $5,721.6
10 : $5,483.2

PE9864/SF-10

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-430, Gain Min: 10, Beam Width, 3dB V: 64.8, Beam Width, 3dB H: 45.4, Frequency, Min: 1.7 GHz, Frequency, Max: 2.6 GHz. WR-430 Waveguide Standard Gain Horn Antenna Operating from 1.7 GHz to 2.6 GHz with a Nominal 10 dB Gain SMA Female Input. The PE9864/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-430 input and a waveguide to coaxial transition adapter. Our WR-430 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-430 standard gain horn antenna with an SMA female input has a minimum frequency of 1.7 GHz and a maximum frequency of 2.6 GHz. Pasternack’s PE9864/SF-10 waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 64.8 degrees and a horizontal beam width of 45.4 degrees at 3 dB. This WR-430 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $3,510.0
5 : $3,369.6
10 : $3,229.2

TE Connectivity

DT06-4S-P004

TE Connectivity

PLG, 4P, GRY, N Nominal Voltage Architecture: 48 V 24 V 12 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 48 V | Part Number: DT06-4S-P004 | Internal Number: DT06-4S-P004 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $1.88

3,225

DT06-4S-LC01

TE Connectivity

PLG, 4P, BLK, E, SEAL RET,DIN BKSHL ADPT Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 12 V 4 | Part Number: DT06-4S-LC01 | Internal Number: DT06-4S-LC01 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $8.55

1,380

DTM06-4S-C017

TE Connectivity

PLG, 4P, GRY, BLOCKED Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Dtm Housing | 48 V | Part Number: DTM06-4S-C017 | Internal Number: DTM06-4S-C017 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $2.58

894

DTM06-4S-E003

TE Connectivity

DTM06-4S-E003, PLG, 4P, GRY, N, CAP Nominal Voltage Architecture: 12 V Number of Positions: 4 Connector & Housing Type: Plug Connector System: Wire-to-Wire Mating Pin Diameter: 1 mm Deutsch Dtm Housing | 12 V 4 Plug Wire-to-Wire | Part Number: DTM06-4S-E003 | Internal Number: 2298287-1 | 1 mm | TE Connectivity
RoHS : Compliant

1 : $2.75

782

DT06-4S-CP01

TE Connectivity

PLG, 4P, BLK, BLOCKED, SEAL RET Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 48 V | Part Number: DT06-4S-CP01 | Internal Number: DT06-4S-CP01 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $4.89

766

DT06-4S-EP11

TE Connectivity

PLG, 4P, BLK, N, SEAL RET, XCAP Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 24 V | Part Number: DT06-4S-EP11 | Internal Number: DT06-4S-EP11 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $2.89

755

DTP06-4S-CE02

TE Connectivity

PLG, 4P, BLK, E Nominal Voltage Architecture: 24 V 12 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 2.39 mm Deutsch Dtp Housing | 24 V Housing for Female Terminals | Part Number: DTP06-4S-CE02 | Internal Number: DTP06-4S-CE02 | Alias Number: ZPF000000000130278 | 2.39 mm | TE Connectivity
RoHS : Compliant

1 : $7.33

616

DTMH06-4SA

TE Connectivity

PLG, 4P, BLK, N, HI TEMP, A Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1 mm Automotive Housing | 48 V | Part Number: DTMH06-4SA | Internal Number: DTMH06-4SA | 1 mm | TE Connectivity
RoHS : Compliant

1 : $3.26

516

DTP06-4S-EE01

TE Connectivity

PLG, 4P, BLK, N, XCAP Nominal Voltage Architecture: 12 V 24 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 2.39 mm Deutsch Dtp Housing | 12 V 4 Housing for Female Terminals | Part Number: DTP06-4S-EE01 | Internal Number: DTP06-4S-EE01 | Alias Number: ZPF000000000130281 | 2.39 mm | TE Connectivity
RoHS : Compliant

1 : $7.08

484

DT06-4S-C017

TE Connectivity

PLG, 4P, GRY, BLOCKED Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 24 V | Part Number: DT06-4S-C017 | Internal Number: DT06-4S-C017 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $3.16

460

DT06-4S-CE15

TE Connectivity

PLG, 4P, BLK, E, SEAL RET, DOVETAIL CAP Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 24 V | Part Number: DT06-4S-CE15 | Internal Number: DT06-4S-CE15 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $6.21

454

DT06-4S-CE04

TE Connectivity

PLG, 4P, GRY, E, XCAP Nominal Voltage Architecture: 12 V 48 V 24 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 12 V 4 | Part Number: DT06-4S-CE04 | Internal Number: DT06-4S-CE04 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $6.39

395

DT06-4S-EP04

TE Connectivity

PLG, 4P, GRY, N, CAP Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Plug Connector | 12 V 4 | Part Number: DT06-4S-EP04 | Internal Number: DT06-4S-EP04 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $2.44

182

DTM06-4S-E004

TE Connectivity

PLG, 4P, BLK, N Nominal Voltage Architecture: 24 V 48 V 12 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Dtm Housing | 24 V | Part Number: DTM06-4S-E004 | Internal Number: DTM06-4S-E004 | Alias Number: ZPF000000000130268 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $2.18

159

FN9264S-10-06

TE Connectivity

FN9264S-10-06 Current Rating (Max): 10 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: FASTON Ground Choke Option: No Fn9264 Power Entry Module With Emc Filter – General-Purpose Module With Integrated Switch | 10 A Filtered 180 µA FASTON | Part Number: FN9264S-10-06 | Internal Number: 811707-SF | FN9264S-10-06 Current Rating (Max): 10 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: FASTON Ground Choke Option: No Fn9264 Power Entry Module With Emc Filter – General-Purpose Module With Integrated Switch | 10 A Filtered 180 µA FASTON | Part# FN9264S-10-06
RoHS : Compliant

50 : $45.7
25 : $48.38
10 : $51.07
1 : $53.76

Vyrian

DT06-4S-EP04

TE Connectivity

Combination Line Connector, 4 Contact(s), Female, Crimp Terminal, Plug
RoHS : Compliant

7,285

M25PX64STVMF6EBA

Micron Technology Inc

Flash, 8MX8, PDSO16
RoHS : Compliant

7,133

KGM100X64SC2/64

Kingston Technology Company

6,674

M25PX64STVME6TGB

Micron Technology Inc

Flash, 8MX8, PDSO8
RoHS : Compliant

6,663

M25PX64SOVMD3GA

Micron Technology Inc

Flash, 8MX8, PDSO8
RoHS : Compliant

5,603

MT5LC2564SG-15IT

Micron Technology Inc

Standard SRAM, 64KX4, 15ns, CMOS, PDSO24
RoHS : Not Compliant

5,517

M25PX64STVMF6TPB

Micron Technology Inc

Flash, 8MX8, PDSO16
RoHS : Compliant

5,363

MT5LC2564SG-35LPAT

Micron Technology Inc

Standard SRAM, 64KX4, 35ns, CMOS, PDSO24
RoHS : Not Compliant

4,636

KGM100X64SC2/32

Kingston Technology Company

4,350

MT5C2564SG-25LPXTTR

Micron Technology Inc

Standard SRAM, 64KX4, 25ns, CMOS, PDSO24
RoHS : Not Compliant

4,278

EPM7064STI100-10P

Altera Corporation

EE PLD, 10ns, CMOS, PQFP100

3,836

LM27964SQX-C/NOPB

Texas Instruments

LED Driver, PQCC24
RoHS : Compliant

3,687

M25PX64STVME3GA

Micron Technology Inc

Flash, 8MX8, PDSO8
RoHS : Compliant

2,420

EPM7064SLC44-6N

Intel / Altera

EE PLD, 6ns, 64-Cell, CMOS, PQCC44

2,235

MS3106E36-4SX

Defense Logistics Agency

MIL Series Connector, 3 Contact(s), Aluminum Alloy, Female, Solder Terminal, Plug

685

Win Source Electronics

ATMXT1664S-CU

Microchip Technology Inc

IC SENSOR MAXTOUCH
RoHS : Compliant

178 : $2.1864
143 : $2.2774
110 : $2.3686
77 : $2.5507
49 : $2.6417
23 : $2.824

62,000

EPM7064SLC44-10

Altera Corporation

IC CPLD 64MC 10NS 44PLCC
RoHS : Not Compliant

120 : $3.234
96 : $3.3688
74 : $3.5035
52 : $3.7731
34 : $3.9077
16 : $4.1772

47,640

DVIULC6-4SC6

STMicroelectronics

TVS DIODE 5VWM 17VC SOT23-6 / ESD Suppressor Diode Diode Array Uni-Dir 5V 6-Pin SOT-23 T/R
RoHS : Compliant

320 : $0.939
260 : $0.9771
200 : $1.0153
140 : $1.0917
90 : $1.1298
45 : $1.2062

30,000

ATMXT1664S1-CU

Microchip Technology Inc

IC SENSOR MAXTOUCH
RoHS : Compliant

18 : $19.7053
13 : $21.979
10 : $22.7369
8 : $23.4948
5 : $24.2527
2 : $29.5579

22,222

DVIULC6-4SC6Y

STMicroelectronics

TVS DIODE 5VWM 17VC SOT23-6
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

15,000

BG95M3LA-64-SGNS

Quectel Wireless Solutions Co Ltd

RF TXRX MOD CELLULAR SMD / Cellular, Navigation BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS, GSM, LTE Transceiver Module 850MHz, 900MHz, 1.8GHz, 1.9GHz Antenna Not Included Surface Mount
RoHS : Compliant

26 : $11.9084
19 : $13.2825
15 : $13.7405
11 : $14.1985
7 : $14.6565
3 : $17.8626

6,573

NCV8664ST33T3G