7004-03-CS-A1-R1 Price, Distributor, Stock

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 48 inches. SSMA Male to SSMA Male Cable 48 Inch Length Using RG188 Coax., Radio frequency assembly SSMA male to SSMA male cable 48 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMA male to SSMA male cable 48 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMA cable connection on one end and SSMA cable connection on the other. Our SSMA to SSMA cable assemblies have a male gender on end 1 and male on end 2. This SSMA to SSMA cable is a male to male coax assembly, PE33700-48, can also be known as a SSMA plug to SSMA plug cable assembly and will be shipped same-day as it is purchased. SSMA plug to SSMA plug cable assembly PE33700-48 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMA male to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMA plug to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to SSMA male cable 48 inch length using RG188 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

100

PE7004-2

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 2 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-2 2 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $387.99
10 : $372.47
25 : $356.95

PE7004-30

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 30 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Unknown

1 : $338.99
10 : $325.43
25 : $311.87

PE7004-1

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 1 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 1 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-1 is a fixed 1 dB attenuator from Pasternack. This 1dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-1 1 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-1 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 1dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $329.99
10 : $316.79
25 : $303.59

PE7004-8

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 8 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 8 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-8 is a fixed 8 dB attenuator from Pasternack. This 8dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-8 8 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-8 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 8dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $280.99
10 : $269.75
25 : $258.51

PE7004-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 10 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Compliant

1 : $355.99
10 : $341.75
25 : $327.51

PE7004-15

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 15 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 15 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-15 is a fixed 15 dB attenuator from Pasternack. This 15dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-15 15 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-15 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 15dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $333.99
10 : $320.63
25 : $307.27

PE3TC0700-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-HF, RF Cable Type: PE-VNA-HF, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.4mm Male to 2.4mm Male Right Angle Precision Cable 48 Inch Length Using High Flex VNA Test Coax, RoHS., Radio frequency assembly 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with 2.4mm cable connection on one end and right angle 2.4mm cable connection on the other. Our precision 2.4mm to right angle 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 2.4mm cable is a male to male coax assembly, PE3TC0700-48, can also be known as a precision 2.4mm plug to right angle 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3TC0700-48 is built with PE-VNA-HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to right angle 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC0700-48 can also be used in the other direction and will be right angle 2.4mm male to 2.4mm male cable assembly if the opposite connectivity is required. Precision 2.4mm plug to 2.4mm right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male right angle precision cable 48 inch length using high flex VNA test coax, RoHS.

1 : $3,550.0
25 : $3,372.5
50 : $3,195.0

PE7004-5

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 5 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 5 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-5 is a fixed 5 dB attenuator from Pasternack. This 5dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-5 5 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-5 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 5dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $380.99
10 : $365.75
25 : $350.51

PE15A7004

Pasternack Enterprises

1 : $7,630.0
5 : $7,324.8
10 : $7,019.6
25 : $6,714.4

PE3W17004

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using RG316-DS Coax. PE3W17004 is a N female bulkhead to TNC male cable using RG316-DS coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17004 N female bulkhead to TNC male cable assembly is constructed with RG316-DS coax.

PE7004-4

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 4 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 4 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-4 is a fixed 4 dB attenuator from Pasternack. This 4dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-4 4 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-4 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 4dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $117.99
10 : $113.27
25 : $108.55

PE7004-3

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 3 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 3 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-3 3 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $374.99
10 : $359.99
25 : $344.99

PE3C7004

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm.

PE7004-6

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 6 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 6 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7004-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7004-6 6 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7004-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $350.99
10 : $336.95
25 : $322.91

Relay Specialties

MSD07004

BlockMaster Blocks

PCB Terminal Block; 7-position 2.54mm; PCB Mount; 10A; 150V 30-16AWG; NonStack; Green

1 : $4.34
10 : $4.28
25 : $4.23
50 : $4.17
100 : $4.12

200

2700-4PDT-240A

Guardian Electric Manufacturing Company

RELAY

1 : $58.33

TE Connectivity

170048-2

TE Connectivity

110 FASTON,REC.,24-20 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 24 – 20 AWG Wire Size: .2 – .51 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 24 – 20 AWG .2 – .51 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.12
100 : $0.16
10 : $0.19
1 : $0.25

66,159

787004-3

TE Connectivity

.8MM SCREWLOCK BRDMT,BULK Connector Hardware Accessory Type: Screwlock Primary Product Material: Stainless Steel Operating Temperature (Max): 185 °F Operating Temperature (Max): 85 °C Operating Temperature Range: -67 – 185 °F Screwlock Stainless Steel | TE Connectivity
RoHS : Compliant

1,000 : $1.49
500 : $1.58
250 : $1.62
50 : $1.88
25 : $1.97
10 : $2.09
1 : $2.39

12,227

170048-4

TE Connectivity

110 FASTON,REC.,24-20 AWG,TPPB Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 24 – 20 AWG Wire Size: .2 – .51 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 24 – 20 AWG .2 – .51 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.14
100 : $0.19
10 : $0.23
1 : $0.3

11,972

1217004-1

TE Connectivity

MAG-MATE 23-20 187 FST/TB TPBR Magnet Wire Terminal Type: Tab Magnet Wire Size: 23 – 20 AWG Magnet Wire Size: .57 – .81 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .02 in Tab 23 – 20 AWG .57 – .81 mm Insulation Displacement (IDC) | TE Connectivity
RoHS : Compliant

1,000 : $0.19
100 : $0.26
10 : $0.32
1 : $0.4

11,000

170042-1

TE Connectivity

FF 110 REC 20-16AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

2,500 : $0.11
1,000 : $0.13
500 : $0.15
250 : $0.16
100 : $0.18
50 : $0.18
25 : $0.18
10 : $0.21
1 : $0.23

8,883

770046-1

TE Connectivity

02P UMNL II CAP REAR 94VO Number of Positions: 2 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Ampseal Header | 2 Cap Housing Crimp | TE Connectivity
RoHS : Compliant

1,000 : $0.36
100 : $0.49
10 : $0.6
1 : $0.76

4,500

2-5767004-2

TE Connectivity

MICTOR RECEPT ASSY, 38 POS. PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 38 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $17.33
50 : $20.43
10 : $22.08
1 : $23.5

4,282

770045-1

TE Connectivity

02P UMNL II CAP-FRONT 94VO Number of Positions: 2 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Panel Wire-to-Wire Ampseal Header | 2 Cap Housing Crimp | TE Connectivity
RoHS : Compliant

1,000 : $0.4
100 : $0.54
10 : $0.67
1 : $0.85

2,887

1-480700-4

TE Connectivity

03P UMNL PLUG HSG YELL Number of Positions: 3 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Wire-to-Wire Ampseal Header | 3 Plug Housing Crimp | TE Connectivity
RoHS : Compliant

1,000 : $0.25
100 : $0.34
10 : $0.41
1 : $0.54

2,760

770044-1

TE Connectivity

15P UMNL II PLUG REAR 94VO Number of Positions: 15 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Ampseal Header | 15 Plug Housing Crimp | TE Connectivity
RoHS : Compliant

1,000 : $0.7
100 : $0.93
10 : $1.15
1 : $1.46

1,378

2-5767004-3

TE Connectivity

MICTOR RECEPT ASSY, 76 POS. PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 76 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant

500 : $39.19
250 : $40.4
100 : $41.65
50 : $42.94
1 : $47.05

470

170041-1

TE Connectivity

FF 110 TAB 20-16AWG BR LP Quick Disconnect Terminal Type: Tab Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 2.8 mm Tab Uninsulated 20 – 16 AWG .51 – 1.31 mm² | TE Connectivity
RoHS : Compliant

2,500 : $0.08
1,000 : $0.1
500 : $0.11
250 : $0.11
100 : $0.13
50 : $0.13
25 : $0.13
10 : $0.15
1 : $0.17

264

T4052217004-001

TE Connectivity

RPC-M8-4MR-0.5-M12-4FS-PVC Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 .5 m 1.6 ft | TE Connectivity
RoHS : Compliant

100 : $22.95
50 : $24.05
25 : $25.14
10 : $26.23
1 : $27.33

190

T4052227004-001

TE Connectivity

RPC-M8-4MR-0.5-M12-4FS-PUR Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 .5 m 1.6 ft | TE Connectivity
RoHS : Compliant

100 : $24.81
50 : $25.99
25 : $27.17
10 : $28.35
1 : $29.53

122

T4052127004-002

TE Connectivity

RPC-M8-4MS-1.0-M12-4FS-PUR Cable Assembly Type: M8 to M12 Number of Positions: 4 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 4 1 m 3.2 ft | TE Connectivity
RoHS : Compliant

100 : $26.44
50 : $27.71
25 : $28.95
10 : $30.23
1 : $31.48

Teledyne HiRel

5962-8867004LA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

5962-8867004KA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

5962-88670043A

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

Waytek, Inc.

19137-0041

Molex

12-10 GA # 10 Block Spade Terminal Nylon Extra Sleeve BRASS SUPPORT SLEEVE

50 : $0.3425
200 : $0.3245
500 : $0.302
1,000 : $0.29

12,755

19057-0046

Molex

16-14 GA 3/8 " Ring Terminal Blue Nylon Brass Extra Sleeve

50 : $0.3567
200 : $0.338
500 : $0.3144
1,000 : $0.3019

7,616

19137-0040

Molex

12-10 GA #8 Block Spade Terminal Nylon Extra Sleeve BRASS SUPPORT SLEEVE

50 : $0.3629
200 : $0.3438
500 : $0.32
1,000 : $0.3072

3,371

67004-0064

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #64 Band 1/2" disc way, no repl

5 : $3.3002
50 : $2.77
100 : $2.611
200 : $2.4386
500 : $2.3326

1,150

67004-0024

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #24 Band 1/2" 1" TO 2"

10 : $2.1404
50 : $1.9104
100 : $1.7335
200 : $1.6804
500 : $1.6185
1,000 : $1.5566

1,053

67004-0028

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #28 Band 1/2" 1-1/4" TO 2-1/4"

10 : $2.1577
50 : $1.9258
100 : $1.7476
200 : $1.694
500 : $1.6316
1,000 : $1.5692

949

670040032052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #32 Band 1/2" 1-1/2" TO 2-1/2"

10 : $2.2086
50 : $1.9632
100 : $1.7814
200 : $1.7268
500 : $1.6632
1,000 : $1.5996

743

67004-0006

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #6 Band 1/2" 3/8 to 7/8

10 : $1.8745
50 : $1.6662
100 : $1.5119
200 : $1.4657
500 : $1.4117
1,000 : $1.3577

719

67004-0048

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #48 Band 1/2" 1-1/2" TO 3-1/2"

10 : $2.5316
50 : $2.2702
100 : $2.0608
200 : $1.9772
500 : $1.904
1,000 : $1.8517

667

67004-0020

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #20 Band 1/2" 3/4" TO 1-3/4"

10 : $2.048
50 : $1.8205
100 : $1.6519
200 : $1.6014
500 : $1.5423
1,000 : $1.4833

567

67004-0044

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #44 Band 1/2" 1-1/4" TO 3-1/4"

10 : $2.4285
50 : $2.1686
100 : $1.9687
200 : $1.8989
500 : $1.8389
1,000 : $1.7688

500

67004-0012

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #12 Band 1/2" 1/2" TO 1-1/4"

10 : $1.8745
50 : $1.6662
100 : $1.5119
200 : $1.4657
500 : $1.4117
1,000 : $1.3577

386

670040036052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #36 Band 1/2" 3/4" TO 2-3/4"

10 : $2.4247
50 : $2.1554
100 : $1.9558
200 : $1.896
500 : $1.826
1,000 : $1.7563

385

67004-0056

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #56 Band 1/2" 2" TO 4"

5 : $3.1911
50 : $2.6805
100 : $2.5017
200 : $2.3486
500 : $2.2465

220

15370042

Aptiv PLC

CRIMPER-800 SERIES 15370042

1 : $360.09
10 : $338.48

Wuhan P&S

BAS70-04-HE3-08

Vishay Intertechnologies

70V, 200mA, Single&Dual Small Signal Schottky Diodes
RoHS : Compliant

1 : $0.1112
100 : $0.0393
500 : $0.0288
1,000 : $0.0262

999,000

BAS70-04LT1G

onsemi

Dual Series Schottky Barrier Diode
RoHS : Compliant

1 : $0.05
100 : $0.03
500 : $0.03
1,000 : $0.03

84,000

7004-03-CS-A1-R1 Distributor

Link URL