709P5ABC Price, Distributor, Stock

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to 2.92mm Male Cable 6 Inch Length Using PE-047SR Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 6 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable 6 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W01709-6 can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3W01709-6 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 6 inch length using PE-047SR coax.

1 : $389.99
25 : $370.49
50 : $350.99
100 : $335.39

PE8709

Pasternack Enterprises

Key Specifications, Bands: UMTS, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 1.92 GHz, Bandpass Max Frequency: 1.98 GHz, RF Filter Design: Combline, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Power: 5 Watts. 4 Section Bandpass Filter With SMA Female Connectors Operating From 1.92 GHz To 1.98 GHz With a 60 MHz Passband. UMTS bandpass filter PE8709 from Pasternack is part of our extensive in-stock RF components for sale. Our UMTS band pass filter is manufactured with SMA connectors that are female and in a 4 section design. This 4 section SMA bandpass filter for UMTS has an insertion loss of 1.500 dB and a maximum power of 5 Watts. Frequency range of this band pass filter is 1.92 GHz to 1.98 GHz and the passband is 60 MHz. PE8709 bandpass filter for UMTS band is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our 4 section UMTS bandpass filter can be bought and shipped worldwide the same-day as with our other in-stock RF parts.

1 : $780.0
10 : $748.8
25 : $717.6

PE7094-07

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 7 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 7 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7094-07 is a fixed 7 dB attenuator from Pasternack. This 7dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7094-07 7 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7094-07 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 7dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $129.99
10 : $124.79
25 : $119.59
100 : $114.39

PE3C0709/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG316 Coax with HeatShrink. PE3C0709/HS is a BNC male to SMA male cable using RG316 coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0709/HS BNC male to SMA male cable assembly is constructed with RG316 coax.

PE3C7094

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm.

PE3W14709/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated SSMC Plug to N Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-100-FR Coax with HeatShrink., Radio frequency assembly fire rated SSMC plug to N female bulkhead low loss cable 24 inch length using LMR-100-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SSMC plug to N female bulkhead low loss cable 24 inch length using LMR-100-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMC cable connection on one end and a type N bulkhead cable connection on the other. Our low loss SSMC to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W14709/HS-24 can also be known as a low loss SSMC male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14709/HS-24 RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMC plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. SSMC male to type N jack cable assembly PE3W14709/HS-24 is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14709/HS-24 can also be used in the other direction and will be a type N female bulkhead to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMC to type N cable assembly for quick shipment worldwide. Variations of SSMC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W17097/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using RG316 Coax with HeatShrink. PE3W17097/HS is a MMCX plug right angle to BMA jack 2 hole flange cable using RG316 coax. This Pasternack MMCX plug right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BMA for connector 2. MMCX right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack BMA 2 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17097/HS MMCX plug right angle to BMA jack 2 hole flange cable assembly is constructed with RG316 coax.

PE7090-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.4:1, Attenuation: 10 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7090-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7090-10 10 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7090-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $700.0
10 : $672.0
25 : $644.0

PE3C0709LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Cable 36 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly SMA male to BNC male cable 36 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable 36 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0709LF-36 can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0709LF-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0709LF-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 36 inch length using RG316 coax, LF solder.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3W07094/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to BNC Male Cable Using LMR-200 Coax with HeatShrink. PE3W07094/HS is a N female bulkhead to BNC male cable using LMR-200 coax. This Pasternack N female bulkhead to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07094/HS N female bulkhead to BNC male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

1 : $85.99
25 : $81.69
50 : $77.39
100 : $73.95

PE3W08709

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 93 Ohm RG62 Coax. PE3W08709 is a BNC male to BNC male cable using RG62 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3W08709 BNC male to BNC male cable assembly is constructed with RG62 coax.

PE3W24709/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. SMB Plug to TNC Male Right Angle Cable Using LMR-195-FR Coax with HeatShrink. PE3W24709/HS is a SMB plug to TNC male right angle cable using LMR-195-FR coax. This Pasternack SMB plug to TNC male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm TNC for connector 2. SMB to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24709/HS SMB plug to TNC male right angle cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W07095-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. TNC Female Bulkhead to TNC Male Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly TNC female bulkhead to TNC male right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to TNC male right angle low loss cable 200 cm length using LMR-100 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. PE3W07095-200CM can also be known as a low loss TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE3W07095-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07095-200CM can also be used in the other direction and will be right angle TNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC male right angle low loss cable 200 cm length using LMR-100 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE7092-3

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 3 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 3 dB Fixed Attenuator, SMA Male to SMA Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7092-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7092-3 3 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7092-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $73.99
25 : $70.29
50 : $66.59
100 : $63.63

PE7094-03

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 3 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 3 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7094-03 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7094-03 3 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7094-03 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $145.99
10 : $140.15
25 : $134.31
100 : $128.47

Win Source Electronics

770904-1

TE Connectivity

CONN SOCKET 18-22AWG TIN CRIMP
RoHS : Compliant

10,490 : $0.0286
7,840 : $0.0319
6,065 : $0.033
4,400 : $0.0341
2,845 : $0.0352
1,170 : $0.0428

585,000

DEA070960LT-4006B1

TDK Corporation

FILTER MULTILAYER
RoHS : Compliant

5,640 : $0.0532
4,220 : $0.0593
3,260 : $0.0614
2,370 : $0.0634
1,530 : $0.0654
630 : $0.0798

112,943

7447709152

Wurth Elektronik

POWER-CHOKE WE-PD | FIXED IND 1.5MH 650MA 2.3 OHM
RoHS : Compliant

164 : $2.0515
123 : $2.2882
95 : $2.3671
69 : $2.446
45 : $2.5249
19 : $3.0772

77,300

7447709470

Wurth Elektronik

POWER-CHOKE WE-PD | FIXED IND 47UH 3.8A 60 MOHM SMD
RoHS : Compliant

164 : $1.8327
123 : $2.0441
95 : $2.1146
69 : $2.1851
45 : $2.2556
19 : $2.749

40,250

LC709203FQH-01TWG

onsemi

IC BATT MONITOR LI-ION 8WDFN / Smart LiB Gauge Battery Fuel Gauge LSI
RoHS : Compliant

82 : $3.6993
65 : $3.8497
50 : $4.0
35 : $4.3008
23 : $4.4512
11 : $4.7519

20,000

7447709151

Wurth Elektronik

FIXED IND 150UH 2.1A 200MOHM SMD / 150 µH Shielded Drum Core, Wirewound Inductor 2.1 A 200mOhm Max Nonstandard
RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

20,000

7447709100

Wurth Elektronik

FIXED IND 10UH 7.1A 21 MOHM SMD
RoHS : Compliant

950 : $0.3169
760 : $0.3297
585 : $0.3426
410 : $0.3684
265 : $0.3813
125 : $0.407

10,000

ACS709LLFTR-20BB-T

Allegro MicroSystems LLC

SENSOR CURRENT HALL 20A AC/DC
RoHS : Compliant

83 : $3.6157
62 : $4.0329
48 : $4.172
35 : $4.3111
23 : $4.4501
10 : $5.4236

7,580

TPS71709DSER

Texas Instruments

IC REG LDO 0.9V 0.15A 6WSON
RoHS : Compliant

375 : $0.8053
280 : $0.8982
220 : $0.9291
160 : $0.9601
105 : $0.9911
45 : $1.2079

6,000

TPS70925DBVR

Texas Instruments

IC REG LDO 2.5V 0.15A SOT23-5
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

6,000

CX20709-21Z

Conexant Systems Inc

16 : $19.697
12 : $21.9697
9 : $22.7273
7 : $23.4849
5 : $24.2425
2 : $29.5455

4,000

AD7091RBRMZ-RL7

Analog Devices Inc

IC ADC 12BIT SAR 10MSOP
RoHS : Compliant

55 : $5.5489
44 : $5.7745
34 : $6.0
24 : $6.4512
15 : $6.6767
8 : $7.1279

2,720

MAX709MCSA-T

Maxim Integrated Products

IC SUPPLY MON W/RESET 8SOIC
RoHS : Not Compliant

270 : $1.4416
205 : $1.6079
160 : $1.6632
115 : $1.7186
75 : $1.7742
30 : $2.1622

2,600

AUIPS7091S

Infineon Technologies AG

IC HIGH SIDE SWITCH IPS D2-PAK-5
RoHS : Compliant

4 : $97.7444
3 : $109.0226
2 : $112.782
1 : $116.5414

2,400

TPS70925DBVT

Texas Instruments

IC REG LDO 2.5V 0.15A SOT23-5 / LDO Regulator Pos 2.5V 0.15A 5-Pin SOT-23 T/R
RoHS : Compliant

38 : $8.0758
28 : $9.0076
22 : $9.3182
16 : $9.6288
11 : $9.9394
5 : $12.1137

Wuhan P&S

MMA02040C4709FB300

Vishay Intertechnologies

Professional Thin Film MELF Resistors
RoHS : Compliant

1 : $0.13
100 : $0.05
500 : $0.04
1,000 : $0.04

261,000

G22041432709J2C000

Vishay Intertechnologies

Axial Vitreous Leaded Wirewound Resistors
RoHS : Compliant

1 : $4.23
100 : $1.41
500 : $1.31
1,000 : $1.27

5,000

NCD57090ADWR2G

onsemi

Isolated High Current Gate Driver
RoHS : Compliant

1 : $3.84
100 : $2.45
500 : $2.02
1,000 : $1.86

3,000

709P5ABC Distributor

Link URL