7486AARMZ-R7 Price, Distributor, Stock

7486AARMZ-R7 Distributor

Distributor

Part #

Manufacturer

Description

Price

Qty.
BuyNow

Ameya Holding Limited

IRL7486MTRPBF

Infineon Technologies AG

RoHS : Compliant

33,600

BU7486F-E2

ROHM Semiconductor

接地检测高速低电压 CMOS运算放大器
RoHS : Compliant

1 : $1.1214
10 : $1.1214
50 : $1.1214
100 : $1.0584
500 : $0.9954
1,000 : $0.9324
2,500 : $0.8064
5,000 : $0.756
12,500 : $0.6552
25,000 : $0.6048

7,490

BU7486FVM-TR

ROHM Semiconductor

接地检测高速低电压 CMOS运算放大器
RoHS : Compliant

1 : $0.8442
10 : $0.8442
50 : $0.8442
100 : $0.8064
500 : $0.756
1,000 : $0.7056
3,000 : $0.6174
6,000 : $0.567
15,000 : $0.4914
30,000 : $0.4662

6,300

BU7486SFVM-TR

ROHM Semiconductor

接地检测高速低电压 CMOS运算放大器
RoHS : Compliant

1 : $0.882
10 : $0.882
50 : $0.882
100 : $0.8316
500 : $0.7812
1,000 : $0.7434
3,000 : $0.6426
6,000 : $0.5922
15,000 : $0.5166
30,000 : $0.4788

300

BU7486FV-E2

ROHM Semiconductor

接地检测高速低电压 CMOS运算放大器
RoHS : Compliant

1 : $1.1844
10 : $1.1844
50 : $1.1844
100 : $1.1214
500 : $1.0584
1,000 : $0.9954
2,500 : $0.8568
5,000 : $0.7938
12,500 : $0.693
25,000 : $0.6426

250

BU7486SF-E2

ROHM Semiconductor

RoHS : Compliant

1 : $1.07
10 : $0.9365
100 : $0.8799
500 : $0.718
1,000 : $0.6669
1,500 : $0.5676
2,500 : $0.4541

100

ComSIT USA

57486774

TE Connectivity

AVAILABLE EU

125

ComSIT USA

IRL7486MTRPBF

International Rectifier

STRONG IR FET Power Field-Effect Transistor, 209A I(D), 40V, 0.00125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
RoHS : Compliant

4,520

Richardson RFPD

MACP-007486-CH0010

MACOM

17dB Couple 5-1000MHz
RoHS : Compliant

SI5351C-B07486-GMR

Skyworks Solutions Inc

Clock Generator 10MHz to 100MHz-IN 200MHz-OUT 20-P
RoHS : Compliant

SI5351C-B07486-GM

Skyworks Solutions Inc

Clock Generator 10MHz to 100MHz-IN 200MHz-OUT 20-P
RoHS : Compliant

10207486-00

TE Connectivity

NTC Thermistor Sensor
RoHS : Compliant

1 : $10.73
1,000 : $9.01
2,500 : $8.79
5,000 : $8.47
100,009 : $6.97

5748612-1

TE Connectivity

Conn D-Sub SKT 25 POS 1.38mm Solder ST Thru-Hole 2
RoHS : Compliant

1 : $6.84
1,000 : $5.47
2,500 : $4.79
5,000 : $4.38
10,000 : $4.1
250,009 : $3.83

Chip 1 Exchange

DE0907-486 R 561K 2K

Murata Manufacturing Co Ltd

INSTOCK

14,000

DE0907-486 R 561K 2K

Murata Manufacturing Co Ltd

INSTOCK

10,800

DE1307486E472MKH

Murata Manufacturing Co Ltd

INSTOCK

1,546

748627200

TE Connectivity

INSTOCK

800

DE1307486E472MKH

Murata Manufacturing Co Ltd

INSTOCK

544

7486272-

INSTOCK

400

2274867-5

TE Connectivity

INSTOCK
RoHS : Compliant

301

748627200-

TE Connectivity

INSTOCK

200

SN7486N

INSTOCK

N7486A

INSTOCK

5748676-2

TE Connectivity

INSTOCK
RoHS : Compliant

748677-1

TE Connectivity

INSTOCK
RoHS : Not Compliant

748677-2

TE Connectivity

INSTOCK
RoHS : Not Compliant

Avnet Asia

10177486-Z198011LF

Amphenol Corporation

FCI10177486-Z198011LF DENSISTAK FLEX CAB (Alt: 10177486-Z198011LF)
RoHS : Compliant

5748676-5

TE Connectivity

D Sub Backshell, AMPLIMITE Series, DD, 180?, Zinc Alloy Body (Alt: 5748676-5)
RoHS : Compliant

5748677-2

TE Connectivity

(Alt: 5748677-2)
RoHS : Compliant

5748676-1

TE Connectivity

(Alt: 5748676-1)
RoHS : Compliant

5748676-2

TE Connectivity

D Sub Backshell, Diecast, Rapid Assembly, AMPLIMITE, DA, 180?, Zinc Alloy Body (Alt: 5748676-2)
RoHS : Compliant

Component Electronics, Inc

748627-2

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $0.75
100 : $0.87
1 : $1.15

571

DE0907-486B102K3K

Murata Manufacturing Co Ltd

IN STOCK SHIP TODAY

1,000 : $0.25
100 : $0.29
1 : $0.38

539

7486N

Signetics

IN STOCK SHIP TODAY

748677-3

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $2.25
100 : $2.6
1 : $3.46

748610-7

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $1.0
100 : $1.15
1 : $1.54

748634-1

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $2.0
100 : $2.31
1 : $3.08

748678-2

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $4.0
100 : $4.62
1 : $6.15

DM7486N

National Semiconductor Corporation

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $0.5
100 : $0.58
1 : $0.77

5748677-1

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $3.25
100 : $3.75
1 : $5.0

HBL7486G

Hubbell Premise Wiring

IN STOCK SHIP TODAY

1,000 : $20.0
100 : $23.08
1 : $30.77

5748678-3

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $3.5
100 : $4.04
1 : $5.38

5748678-2

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $5.0
100 : $5.77
1 : $7.69

748678-1

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $2.5
100 : $2.88
1 : $3.85

748676-4

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $5.0
100 : $5.77
1 : $7.69

748676-2

TE Connectivity

IN STOCK SHIP TODAY
RoHS : Not Compliant

1,000 : $4.0
100 : $4.62
1 : $6.15

EBV Elektronik

IRL7486MTRPBF

Infineon Technologies AG

Trans MOSFET NCH 40V 209A 10Pin DirectFET ME TR (Alt: SP001567046)
RoHS : Compliant

Pasternack Enterprises US

PE7486-40

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7486-40 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 40 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $440.99
10 : $432.17
25 : $423.35
100 : $414.53

PE7486-30

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7486-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $376.99
10 : $369.45
25 : $361.91
100 : $354.37

PE7486-20

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7486-20 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $380.99
10 : $373.37
25 : $365.75
100 : $358.13

PE7486-3

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7486-3 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $376.99
10 : $369.45
25 : $361.91
100 : $354.37

PE7486-6

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7486-6 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $376.99
10 : $369.45
25 : $361.91
100 : $354.37

PE7486-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7486-10 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $378.99
10 : $371.41
25 : $363.83
100 : $356.25

PE3W07486/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMA Male Right Angle to SMA Male Cable Using RG188 Coax with HeatShrink. PE3W07486/HS is a SSMA male right angle to SMA male cable using RG188 coax. This Pasternack SSMA male right angle to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. SSMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SSMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07486/HS SSMA male right angle to SMA male cable assembly is constructed with RG188 coax.

PE3W17486

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to TNC Male Cable Using RG316-DS Coax. PE3W17486 is a MMCX plug right angle to TNC male cable using RG316-DS coax. This Pasternack MMCX plug right angle to TNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. MMCX right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17486 MMCX plug right angle to TNC male cable assembly is constructed with RG316-DS coax.

PE3C10748-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 2.92mm Male Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10748-6 1.85mm male to 2.92mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10748-6 can also be known as a 1.85mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C10748-6 1.85mm plug to 2.92mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10748-6 can also be used in the other direction and will be a 2.92mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements.

1 : $323.42
10 : $310.48
25 : $297.55
100 : $284.61

PE3W17486/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to TNC Male Cable Using RG316-DS Coax with HeatShrink. PE3W17486/HS is a MMCX plug right angle to TNC male cable using RG316-DS coax. This Pasternack MMCX plug right angle to TNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm TNC for connector 2. MMCX right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17486/HS MMCX plug right angle to TNC male cable assembly is constructed with RG316-DS coax.

PE3C9748-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Male to 2.4mm Male VITA 67 Cable 6 Inch Length Using PE-P086HF Coax with HeatShrink., Radio frequency assembly mini SMP male to 2.4mm male VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP male to 2.4mm male VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and 2.4mm cable connection on the other. Our vita 67 mini SMP to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C9748-6 can also be known as a vita 67 mini SMP plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. Mini SMP plug to 2.4mm plug cable assembly PE3C9748-6 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to 2.4mm cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9748-6 can also be used in the other direction and will be 2.4mm male to mini SMP male cable assembly if the opposite connectivity is required. Vita 67 mini SMP plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.4mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP male to 2.4mm male VITA 67 cable 6 inch length using PE-P086HF coax with heatshrink.

1 : $312.99
25 : $297.34
50 : $281.69
100 : $269.17

PE3W07486

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMA Male Right Angle to SMA Male Cable Using RG188 Coax. PE3W07486 is a SSMA male right angle to SMA male cable using RG188 coax. This Pasternack SSMA male right angle to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. SSMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SSMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07486 SSMA male right angle to SMA male cable assembly is constructed with RG188 coax.