| Electronic Components Datasheet Search |
|
75G-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | 75GR4220AA30J | KEMET Corporation | Cap Film 2.2uF 160V PP 5%( 32 X 11 X 20mm) Radial Plastic Rectangular Can 27.5mm 0.0072 Ohm 105°C Tray RoHS : Compliant |
| 577 | |
| 75GR44704030J | KEMET Corporation | Cap Film 4.7uF 160V PP 5%( 32 X 13 X 25mm) Radial Plastic Rectangular Can 27.5mm 0.0051 Ohm 105°C Tray RoHS : Compliant |
| 376 | ||
![]() Avnet Americas | LTPL-G35UV275GR-E | Lite-On Semiconductor Corporation | LED Single Chip Ultraviolet 277nm 200mA 2-Pin SMD - Tape and Reel (Alt: LTPL-G35UV275GR-E) RoHS : Compliant |
| 0 | |
| BZT52B75-G RHG | Taiwan Semiconductor | Diode Zener Single 75V 2% 410mW 2-Pin SOD-123 Surface Mount T/R - Tape and Reel (Alt: BZT52B75-G RHG) RoHS : Compliant |
| 0 | ||
| MPQ4475GR-AEC1-P | Monolithic Power Systems | Converter DC-DC Single Step Down 7V to 36V 25-Pin QFN - Tape and Reel (Alt: MPQ4475GR-AEC1-P) RoHS : Compliant | 0 | |||
| IDSS-08-D-04.75-G-R | Samtec Inc | - Bulk (Alt: IDSS-08-D-04.75-G-R) RoHS : Compliant |
| 0 | ||
| BZT52C75-G RHG | Taiwan Semiconductor | Diode Zener Single 75V 5% 500mW 2-Pin SOD-123F Surface Mount T/R - Tape and Reel (Alt: BZT52C75-G RHG) RoHS : Compliant |
| 0 | ||
| MPQ4475GR-E-AEC1-P | Monolithic Power Systems | 36V,2.5A,Frequency Selectable,Step-Down Converter with Single USB Charging Port AEC-Q100 Qualified - Tape and Reel (Alt: MPQ4475GR-E-AEC1-P) RoHS : Compliant |
| 0 | ||
| RE75GR499C02 | Vishay Intertechnologies | - Bulk (Alt: RE75GR499C02) RoHS : Not Compliant |
| 0 | ||
| RE75GR750C02 | Vishay Intertechnologies | - Bulk (Alt: RE75GR750C02) RoHS : Not Compliant |
| 0 | ||
| RE75GR800J01 | Vishay Intertechnologies | RH-50 .8 1% RE75GR800 J01 - Bulk (Alt: RE75GR800J01) RoHS : Not Compliant |
| 0 | ||
| LTPL-G35UVC275GR | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTPL-G35UVC275GR) RoHS : Compliant | 0 | |||
| MPQ4475GR-E-AEC1-Z | Monolithic Power Systems | 36V,2.5A,Frequency Selectable,Step-Down Converter with Single USB Charging Port AEC-Q100 Qualified - Tape and Reel (Alt: MPQ4475GR-E-AEC1-Z) RoHS : Compliant |
| 0 | ||
| IDMD-10-T-03.75-G-R | Samtec Inc | - Bulk (Alt: IDMD-10-T-03.75-G-R) RoHS : Compliant |
| 0 | ||
| MPQ4475GR-AEC1-Z | Monolithic Power Systems | Converter DC-DC Single Step Down 7V to 36V 25-Pin QFN T/R - Tape and Reel (Alt: MPQ4475GR-AEC1-Z) RoHS : Compliant | 0 | |||
| R75GR44704030K | KEMET Corporation | 440.UF 160V - Trays (Alt: R75GR44704030K) RoHS : Compliant |
| 0 | ||
| RE75GR500C02 | Vishay Intertechnologies | - Bulk (Alt: RE75GR500C02) RoHS : Not Compliant |
| 0 | ||
![]() Newark | R75GR51004000J | KEMET Corporation | Film Capacitor, 10Uf, 160V, Radial; |Kemet R75GR51004000J RoHS : Compliant |
| 224 | |
| R75GR510050H0J | KEMET Corporation | Cap, Aec-Q200, 10Uf, 160V, Film; Dielectric Type:Metallized Pp; Capacitor Case/Package:Radial Box - 2 Pin; Capacitance:10Μf; Capacitance Tolerance:± 5%; Typical Applications:High Frequency; Capacitor Mounting:Through Hole Rohs Compliant: Yes RoHS : Compliant |
| 112 | ||
| H075GR-TB | Thomas & Betts | Conduit Fitting, Buna-N, Zinc, 3/4"; Conduit Configuration:Straight; Trade Size:3/4"; Conduit Material:Zinc; Conduit Colour:-; External Length:40.39Mm; Ip/Nema Rating:-; Product Range:- Rohs Compliant: Yes |Abb Thomas & Betts H075GR-TB RoHS : Compliant |
| 25 | ||
| R75GR468050H0J | KEMET Corporation | Cap, Aec-Q200, 6.8Uf, 160V, Film; |Kemet R75GR468050H0J RoHS : Compliant |
| 8 | ||
| 67075 GR321 | Alpha Wire | Wire, Mppe, Green, 0.75 Mmâ², 164 Ft; Available Until Stocks Are Exhausted |Alpha Wire 67075 GR321 RoHS : Compliant |
| 3 | ||
| FMCA2675/GR-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2675/GR-36 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-1.0/2.3 Plug, 12"; |Fairview Microwave FMCA2675/GR-12 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-72 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2675/GR-72 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-1.0/2.3 Plug, 120"; |Fairview Microwave FMCA2675/GR-120 RoHS : Not Compliant |
| 1 | ||
| FMCA2675/GR-300 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2675/GR-300 RoHS : Not Compliant |
| 1 | ||
| 67075 GR034 | Alpha Wire | |Alpha Wire 67075 GR034 RoHS : Not Compliant |
| 0 | ||
| 75GR510050H0J | KEMET Corporation | 51.0Pf 160V; |Kemet 75GR510050H0J RoHS : Not Compliant |
| 0 | ||
| R75GR4150AA00J | KEMET Corporation | 4.10Uf 160V |Kemet R75GR4150AA00J RoHS : Not Compliant |
| 0 | ||
| R75GR4820AA00K | KEMET Corporation | 4800Pf 160V |Kemet R75GR4820AA00K RoHS : Not Compliant |
| 0 | ||
| IDSD-20-D-37.75-G-R | Samtec Inc | Slim Body Double-Row Idc Socket Assembli; |Samtec, Inc. IDSD-20-D-37.75-G-R RoHS : Not Compliant |
| 0 | ||
![]() RS | L075GR-TB | T&B Fittings | ZINC GROUNDING AND BONDING LOCKNUT, 3/4", FOR USE WITH RIGID/IMC CONDUIT |
| 22 | |
| H075GRA-TB | T&B Fittings | ALUMINUM, GROUNDING HUB, 3/4 INCH, WITH THERMOPLASTIC INSULATING THROAT |
| 8 | ||
| H075GRSST | T&B Fittings | GROUNDING HUB, STAINLESS STEEL, 3/4 INCH, THERMOPLASTIC INSULATING THROAT |
| 7 | ||
| N6PATCH75GR | StarTech | 75 FT CAT6 PATCH CABLE WITH SNAGLESS RJ45 CONNECTORS - GRAY - CAT 6 ETHERNET |
| 7 | ||
| 67075 GR033 | Alpha Wire | METRIC ECOWIRE, GREEN, 100M, .75MM2, 42X 0.16, 600V, MPPE, 19AWG, 67075 SERIE |
| 1 | ||
| H075GRPVC-C | T&B Fittings | HUB WITH PVC GROUNDING/BONDING LOCKNUT, 3/4 |
| 0 | ||
| 67075 GR034 | Alpha Wire | METRIC ECOWIRE, GREEN, 500M, .75MM2, 42 X 0.16, 600V, MPPE, 19AWG, 67075 SERIE |
| 0 | ||
| EL32T75GR1F | Eaton Cutler-Hammer | 320A RINGLESS LEVER BYPASS |
| 0 | ||
| 72HB/40-75 GRN | ABUS Security Tech Germany | PADLOCK, ALUMINUM BODY, 4.84IN H, 1.5IN W, GREEN, SHACKLE .25D 3H .81W, KA |
| 0 | ||
| PSPT-375-175-GR | Brady Worldwide Inc | POLYOLEFIN ADHESIVE MARKING SLEEVES, 0.375"H X 1.75"W X 100, GREEN |
| 0 | ||
| PSPT-250-175-GR | Brady Worldwide Inc | POLYOLEFIN ADHESIVE MARKING SLEEVES, 0.25"H X 1.75"W X 100, GREEN |
| 0 | ||
| 3075 GR005 (NULL) | Alpha Wire | HOOK-UP WIRE, TC, 18 AWG, 16X30, GREEN PVC INSULATED, -20 TO +105C, 600V |
| 0 | ||
| 5875 GR001 (NULL) | Alpha Wire | HOOK-UP WIRE, COPPER, 22 AWG, 19X34, GREEN TFE INSULATED, -60 TO 200C, 300V |
| 0 | ||
| 357-5 GREEN CX1000 | Olympic Wire & Cable Corp | HOOK-UP WIRE; 16 AWG;GREEN |
| 0 | ||
| F083575 (GRS-H-50-60-D-0-0-0-0) | GEFRAN spa | SINGLE-PHASE SOLID STATE RELAY, UP TO 120A INTEGRATED HEATSINK |
| 0 | ||
![]() Bisco Industries | PSPT-187-175-GR | Brady Worldwide Inc | 9,900 | |||
![]() Rochester Electronics | NXP3875GR![]() | NXP Semiconductors | Trans BJTs Single 50V 150mA SOT-23-3 T/R RoHS : Compliant |
| 1,853,460 | |
NXP3875GR![]() | Nexperia | Trans BJTs Single 50V 150mA SOT-23-3 T/R RoHS : Compliant |
| 56,285 | ||
![]() Sager | IDSD-08-D-07.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | ||
| IDSD-20-D-37.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| DX75-GRN | ABB Group | Thomas & Betts |
| 0 | ||
| H075GRPVC-C | ABB Group | Conduit Fittings & Accessories | 0 | |||
| IDSD-20-D-27.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSS-08-D-04.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| UTP28CH75GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 5e (SD), 28 AWG, RoHS : Compliant | 0 | |||
| 5275GR | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| IDSD-20-D-24.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDMD-05-T-15.75-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| H075GRUA | ABB Group | H075GRTB UNASSEMBLED |
| 0 | ||
| IDMD-05-S-15.75-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| H075GRA-TB | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| IDMD-08-D-11.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDMD-10-T-03.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
![]() TME | LT-423 3X0.75 GRY 1M END CUT | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; AS/NZS 3112 (I) plug,cables; PVC; 1m |
| 209 | |
| LT-319 3X0.75 GRAY 1.8M END CUT | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; CEI 23-50 (L) plug,cables; PVC; 1.8m |
| 186 | ||
| LGY0.75-GR/BR | BQ Cable | Wire; H05V-K,LgY; stranded; Cu; 0.75mm2; PVC; green-brown; 100m |
| 100 | ||
| LT-423 3X0.75 GRY 1.5M END CUT | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; AS/NZS 3112 (I) plug,cables; PVC; 1.5m |
| 99 | ||
| LT-319 3X0.75 GRAY 1M END CUT | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; CEI 23-50 (L) plug,cables; PVC; 1m |
| 80 | ||
| LT-318(3A)+503 2X0.75 GRY 1M | Lian Dung Electric Wire Material Co Ltd | Cable; H03VVH2-F; 2x0.75mm2; BS 1363 (G) plug,IEC C7 female; PVC |
| 25 | ||
| LT-423+501 H05VV-F 3X0.75 GRY 1M | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; AS/NZS 3112 (I) plug,IEC C13 female |
| 24 | ||
| LT-318(3A)+503 2X0.75 GRY 5M | Lian Dung Electric Wire Material Co Ltd | Cable; H03VVH2-F; 2x0.75mm2; BS 1363 (G) plug,IEC C7 female; PVC |
| 15 | ||
| PETG 1,75 GREEN TRANSPARENT | Devil Design | Filament: PET-G; Ø: 1.75mm; green (transparent); 220÷250°C; 1kg |
| 14 | ||
| PETG 1,75 GRAY 2 | Devil Design | Filament: PET-G; Ø: 1.75mm; grey; 220÷250°C; 2kg |
| 9 | ||
| PLA 1,75 GREEN METALLIC SOLO 0,33 | Devil Design | Filament: PLA; Ø: 1.75mm; metallic green; 200÷235°C; 330g |
| 9 | ||
| N42W1-075GR025 | Cheval Electronic Enclosure Co Ltd | Cable with crimped terminals; H05V-K; 0.75mm2; grey; N42W-T1 |
| 0 | ||
| R75GR510050H0J | KEMET Corporation | Capacitor: polypropylene; R75; 10uF; 160VDC; 90VAC; 32x22x37mm; THT RoHS : Compliant |
| 0 | ||
| LGY0.75-GR/OR | BQ Cable | Wire; H05V-K,LgY; stranded; Cu; 0.75mm2; PVC; green-orange; 100m |
| 0 | ||
| LT-322 H05VV-F 3X0.75 GRY 2M END RO | Lian Dung Electric Wire Material Co Ltd | Cable; H05VV-F; 3x0.75mm2; CEE 7/7 (E/F) plug angled,cables; PVC |
| 0 | ||
![]() Rutronik | LTPL-G35UV275GR-E | Lite-On Semiconductor Corporation | UVC LED 275NM 21mW 150mA 120° RoHS : Compliant |
| 228 | |
![]() Avnet Abacus | 75GR51004000J | KEMET Corporation | (Alt: R75GR51004000J) RoHS : Compliant | 112 | ||
| 75GR4470AA30J | KEMET Corporation | (Alt: R75GR4470AA30J) RoHS : Compliant | 0 | |||
| 75GR44704030J | KEMET Corporation | (Alt: R75GR44704030J) RoHS : Compliant | 0 | |||
| 75GR4560AA00J | KEMET Corporation | (Alt: R75GR4560AA00J) RoHS : Compliant | 0 | |||
| 75GR4680AA00J | KEMET Corporation | (Alt: R75GR4680AA00J) RoHS : Compliant | 0 | |||
| R75GR42205030J | KEMET Corporation | Power Film Capacitor 22 uF 90 V 160 V 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR42205030J) RoHS : Compliant | 0 | |||
| R75GR4220AA30K | KEMET Corporation | Power Film Capacitor 22 uF 90 V 160 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR4220AA30K) RoHS : Compliant | 0 | |||
| R75GR5100AA00J | KEMET Corporation | Power Film Capacitor 10 uF 90 V 160 V 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR5100AA00J) RoHS : Compliant | 0 | |||
| R75GR51005000J | KEMET Corporation | Power Film Capacitor 10 uF 90 V 160 V 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR51005000J) RoHS : Compliant | 0 | |||
| R75GR5100AA00K | KEMET Corporation | Power Film Capacitor 10 uF 90 V 160 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR5100AA00K) RoHS : Compliant | 0 | |||
| R75GR4220AA30J | KEMET Corporation | Power Film Capacitor 22 uF 90 V 160 V 5 Metallized PP Radial Box 2 Pin Through Hole (Alt: R75GR4220AA30J) RoHS : Compliant | 0 | |||
| R75GR433050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 33 uF 5 Through Hole 90 V 160 V (Alt: R75GR433050H0J) RoHS : Compliant | 0 | |||
| R75GR510050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 10 uF 5 Through Hole 90 V 160 V (Alt: R75GR510050H0J) RoHS : Compliant | 0 | |||
| R75GR468050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 68 uF 5 Through Hole 90 V 160 V (Alt: R75GR468050H0J) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NXP3875GR![]() | Nexperia | Trans GP BJT NPN 50V 015A 3Pin TO236AB TR (Alt: NXP3875GR) RoHS : Compliant | 0 | ||
| IS31CS8975-GRLS2-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS31CS8975-GRLS2-TR) RoHS : Compliant | 0 | |||
| IS32CS8975-GRLA3-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS32CS8975-GRLA3-TR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 3075-GR005 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | |
![]() EBV Elektronik | IS31CS8975-GRLS2-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS31CS8975-GRLS2-TR) RoHS : Compliant | 0 | ||
| IS32CS8975-GRLA3-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS32CS8975-GRLA3-TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 9100375GRY | Easy Braid Co | Wire and Cable | 120 | ||
![]() Master Electronics | 3075-GREEN-100 | Alpha Wire | Hook-up Wire 18AWG 2.85mm Tinned Copper- Green - 600V - 30.48m (100ft)/Spool RoHS : Compliant |
| 6 | |
| IDSD-03-D-15.75-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-08-D-07.75-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-13-D-15.75-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-20-D-37.75-G-R | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| DX75-GRN | Thomas & Betts | PVC CTD DEFL/EXP FITTING 3 RoHS : Compliant |
| 0 | ||
| H075GRPVC-C | Thomas & Betts | 3/4 Inch Hub with PVC Grounding/Bonding Locknut - Insulated Throat for Threaded Rigid Metal Conduit. RoHS : Compliant |
| 0 | ||
| IDSD-08-D-05.75-G-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-20-D-27.75-G-R | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDSS-08-D-04.75-G-R | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| 5275GR | Thomas & Betts | Steel Liquidtight Female Hub Adapter With External Ground - 1-1/4 Inch. RoHS : Compliant |
| 0 | ||
| IDSD-20-D-24.75-G-R | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDMD-05-T-15.75-G-RW | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| H075GRUA | Thomas & Betts | H075GRTB UNASSEMBLED RoHS : Compliant |
| 0 | ||
| IDMD-05-S-15.75-G-RW | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
![]() Neutron USA | N6PATCH75GR | StarTech | StarTech.com 75 ft Gray Snagless Cat6 UTP Patch Cable |
| 22 | |
![]() Pasternack Enterprises US | PE3C8875/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 255 | ||
| PE3C8875/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
![]() Vyrian | 3075GR001 | Alpha Wire | Wire And Cable, 1 Conductor(s), 18AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 9,093 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |