882-D-TA3-R Price, Distributor, Stock

1 : $436.244
5 : $436.244
10 : $384.922
25 : $363.537
50 : $363.537
100 : $350.554
250 : $338.466
500 : $338.466
1,000 : $327.183
2,500 : $327.183
10,000 : $316.629

M85049/88-21P03

Glenair Inc

Connector Acc

1 : $102.6
5 : $102.6
10 : $90.529
25 : $85.5
50 : $85.5
100 : $82.446
250 : $79.603
500 : $79.603
1,000 : $76.95
2,500 : $76.95
10,000 : $74.468

PE4882

Pasternack Enterprises

Connector

C8824-3W15

SOURIAU-SUNBANK

Connector Acc

C8821-2W15

SOURIAU-SUNBANK

Connector Acc

1 : $95.156
5 : $95.156
10 : $83.961
25 : $79.296
50 : $79.296
100 : $76.464
250 : $73.828
500 : $73.828
1,000 : $71.367
2,500 : $71.367
10,000 : $69.065

C8824-3W9

SOURIAU-SUNBANK

Connector Acc

M85049/88-21G02

Glenair Inc

Connector

1 : $645.964
5 : $602.169
10 : $538.303
25 : $530.269
50 : $530.269
100 : $522.471
250 : $507.543
500 : $493.444
1,000 : $486.685
2,500 : $486.685
10,000 : $486.685

M85049/88-21P03

Amphenol PCD

Backshells & Ac

1 : $79.86
5 : $79.86
10 : $70.465
25 : $66.55
50 : $66.55
100 : $64.173
250 : $61.96
500 : $61.96
1,000 : $59.895
2,500 : $59.895
10,000 : $57.963

MS27488-22-2

Glenair Inc

Connector
RoHS : Compliant

1 : $5.945
5 : $5.542
10 : $4.955
25 : $4.881
50 : $4.881
100 : $4.809
250 : $4.671
500 : $4.542
1,000 : $4.479
2,500 : $4.479
10,000 : $4.479

Maritex

926882-1

TE Connectivity

Rectangular Connector Contacts; 926882-1; TE CONNECTIVITY; Tin; Crimp; 14 AWG; 20 AWG
RoHS : Compliant

10,000 : $0.037
5,000 : $0.04
1,000 : $0.048
300 : $0.056
100 : $0.067
10 : $0.091
1 : $0.286

107,938

926882-3

TE Connectivity

Rectangular Connector Contacts; 926882-3; TE CONNECTIVITY; Tin; 14 AWG; Crimp; 20 AWG
RoHS : Compliant

5,000 : $0.045
1 : $0.069

38,001

7-188275-8

TE Connectivity

Female Socket Headers; 7-188275-8; TE CONNECTIVITY; 2; 1.5 A; 8; 8
RoHS : Compliant

1,000 : $0.98
500 : $1.092
100 : $1.266
10 : $1.68
1 : $2.3402

10,342

61988-2

TE Connectivity

Quick Connect, Disconnect Terminals; 61988-2; TE CONNECTIVITY; Brass; Non-Insulated; Tin; 6.35 mm
RoHS : Compliant

2,500 : $0.163
1,000 : $0.183
500 : $0.203
100 : $0.231
10 : $0.271
1 : $0.3197

10,000

2-215882-0

TE Connectivity

Panel Mount Connectors; 2-215882-0; TE CONNECTIVITY; 20; 2; Grey; Gold
RoHS : Compliant

1,000 : $1.192
500 : $1.302
100 : $1.473
10 : $1.839
1 : $2.3377

5,296

880688-2

TE Connectivity

Quick Connect, Disconnect Terminals; 880688-2; TE CONNECTIVITY; Brass; Tin; Non-Insulated
RoHS : Compliant

1,000 : $0.048
100 : $0.057
10 : $0.067
1 : $0.076

3,571

D882SSG-P-AE3-R

Unisonic Technologies Co Ltd

Bipolar Transistors (BJT); D882SSG-P-AE3-R; UTC; 30 V; 3 A
RoHS : Compliant

3,000 : $0.043
1 : $0.062

1,715

RNP18-PK0608-820K

RDA Microelectronics

Inductor: wire; THT; 82uH; Ipracy: 1.3A; 293mOhm; 10%; 7.5x9.5mm

1,000 : $0.066
500 : $0.077
100 : $0.088
10 : $0.099
1 : $0.11

1,000

RNP18-PK0608-821K

RDA Microelectronics

Inductor: wire; THT; 820uH; 10%; 7.5x9.5mm; terminal pitch: 3mm

1,000 : $0.066
500 : $0.077
100 : $0.088
10 : $0.099
1 : $0.11

1,000

1971788-2

TE Connectivity

Rectangular Connector Contacts; 1971788-2; TE CONNECTIVITY; Tin; 0 AWG; Crimp
RoHS : Compliant

1,000 : $0.079
500 : $0.083
100 : $0.091
10 : $0.099
1 : $0.1096

450

DRV8824QPWPRQ1

Texas Instruments

Motor Drivers; DRV8824QPWPRQ1; TEXAS INSTRUMENTS; 28; 4.4 mm; 9.7 mm; 1.2 mm
RoHS : Compliant

1,000 : $2.35
500 : $2.578
100 : $2.893
30 : $3.072
10 : $4.031
1 : $4.637

165

2388278-1

TE Connectivity

Automotive Connectors; 2388278-1; TE CONNECTIVITY
RoHS : Compliant

100 : $0.578
30 : $0.701
10 : $0.831
1 : $0.9642

125

2-215882-6

TE Connectivity

Panel Mount Connectors; 2-215882-6; TE CONNECTIVITY; 2; 26; Gold
RoHS : Compliant

30 : $2.954
10 : $3.381
1 : $4.6907

IW3688-21

Dialog Semiconductor GmbH

LED Driver; AC/DC converter; 45-66kHz; 20W; dimming; single-stage; 230V; -40+150 deg.C; SMD; SO14
RoHS : Compliant

2,500 : $0.335
500 : $0.384
100 : $0.43
25 : $0.455
1 : $0.478

DRV8824PWPR

Texas Instruments

Motor Drivers; DRV8824PWPR; TEXAS INSTRUMENTS; 28; 4.4 mm; 9.7 mm; 1.2 mm
RoHS : Compliant

1,000 : $0.78
500 : $0.844
100 : $1.02
30 : $1.233
10 : $1.455
1 : $1.934

Pasternack Enterprises US

PE4882

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: MCX, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Interface Type 1: RG58, Interface Type 2: RG303, Interface Type 3: RG141, Interface Type 4: PE-C195, Interface Type 5: PE-P195, Interface Type 6: LMR-195, Interface Type 7: .195 inch. MCX Plug Right Angle Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, .195 inch. PE4882 MCX plug right angle coaxial connector has an interface type of RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, .195 inch and a 50 Ohm impedance. Pasternack MCX plug connector uses shield/contact crimp/solder as an attachment method. Our plug MCX right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack right angle MCX plug coaxial connector has a PTFE dielectric type and a VSWR of 1.63. The Pasternack MCX coaxial connector has a brass body with nickel plating. Our PE4882 MCXright angle connector uses brass contact. This MCX plug right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle plug MCX connector will ship the same day as purchased. Our MCX right angle plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MCX connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $44.09
25 : $41.89
50 : $39.68
100 : $37.92

1,317

PE3C5882

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum QMA Male to SMA Female Low PIM Cable Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum QMA male to SMA female low PIM cable using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum QMA male to SMA female low PIM cable using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and SMA cable connection on the other. Our low PIM QMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to SMA cable is a male to female coax assembly, PE3C5882, can also be known as a low PIM QMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA jack cable assembly PE3C5882 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM QMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5882 can also be used in the other direction and will be SMA female to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum QMA male to SMA female low PIM cable using SPP-250-LLPL coax, LF solder.

315

PE34882-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to BNC Female Bulkhead Cable 60 Inch Length Using RG400 Coax., Radio frequency assembly N male to BNC female bulkhead cable 60 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC female bulkhead cable 60 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC bulkhead cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and female on end 2. This type N to BNC cable is a male to female coax assembly, PE34882-60, can also be known as a type N plug to BNC jack cable assembly and will be shipped same-day as it is purchased. N type plug to BNC jack cable assembly PE34882-60 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34882-60 can also be used in the other direction and will be BNC female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC female bulkhead cable 60 inch length using RG400 coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

263

PE3W08827/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to SMA Male Cable 6 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 6 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 6 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W08827/HS-6 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08827/HS-6 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our right angle SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W08827/HS-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder (without contact) attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08827/HS-6 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

126

PE3W08827-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male Right Angle to SMA Male Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA male cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08827-6 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W08827-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08827-6 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 6 inch length using PE-SR402FLJ coax.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

126

PE3C5882-12

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum QMA Male to SMA Female Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum QMA male to SMA female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum QMA male to SMA female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and SMA cable connection on the other. Our low PIM QMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to SMA cable is a male to female coax assembly, PE3C5882-12, can also be known as a low PIM QMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA jack cable assembly PE3C5882-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM QMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5882-12 can also be used in the other direction and will be SMA female to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum QMA male to SMA female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3C6188-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-RA-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to right angle TC-SPP250-716M-RA-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-RA-LP 7/16 DIN cable is a male to male coax assembly, PE3C6188-200CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to right angle TC-SPP250-716M-RA-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-RA-LP 7/16 DIN plug cable assembly PE3C6188-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to right angle TC-SPP250-716M-RA-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-716M-RA-LP 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6188-200CM can also be used in the other direction and will be right angle TC-SPP250-716M-RA-LP 7/16 DIN male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-RA-LP 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-RA-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE38488-24

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 24 inches. QN Male to QN Male Right Angle Cable 24 Inch Length Using RG223 Coax., Radio frequency assembly QN male to QN male right angle cable 24 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to QN male right angle cable 24 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and right angle QN cable connection on the other. Our QN to right angle QN cable assemblies have a male gender on end 1 and male on end 2. This QN to QN cable is a male to male coax assembly, PE38488-24, can also be known as a QN plug to right angle QN plug cable assembly and will be shipped same-day as it is purchased. QN plug to QN plug cable assembly PE38488-24 is built with RG223 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to right angle QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency QN male to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38488-24 can also be used in the other direction and will be right angle QN male to QN male cable assembly if the opposite connectivity is required. QN plug to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to QN male right angle cable 24 inch length using RG223 coax.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE38821

Pasternack Enterprises

PE3W08820LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to MCX Plug Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W08820LF/HS is a SMA female to MCX plug cable using LMR-100A coax. This Pasternack SMA female to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our female SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08820LF/HS SMA female to MCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08828

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to N Female Cable Using RG316 Coax. PE3W08828 is a SMP female right angle to N female cable using RG316 coax. This Pasternack SMP female right angle to N female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm N for connector 2. SMP right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08828 SMP female right angle to N female cable assembly is constructed with RG316 coax.

PE3C9288-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to BNC Male Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly 2.4mm male to BNC male cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to BNC male cable 24 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.4mm cable connection on one end and a BNC cable connection on the other. Our 2.4mm to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C9288-24 can also be known as a 2.4mm plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9288-24 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our 2.4mm male to BNC male cable has a maximum VSWR of 1.4:1. 2.4mm plug to BNC plug cable assembly PE3C9288-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9288-24 can also be used in the other direction and will be a BNC male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to BNC cable assembly for quick shipment worldwide. Variations of 2.4mm and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to BNC RF cable assembly as per your requirements.

1 : $252.99
10 : $242.87
25 : $232.75
100 : $222.63

PE3W08882-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MHV Female Bulkhead to MHV Female Bulkhead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax, MHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV bulkhead cable connection on one end and MHV bulkhead cable connection on the other. Our MHV to MHV cable assemblies have a female gender on end 1 and female on end 2. PE3W08882-36 can also be known as a MHV jack to MHV jack cable assembly and will be shipped same-day as it is purchased. MHV jack to MHV jack cable assembly PE3W08882-36 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency MHV female bulkhead to MHV female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax.

1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43

PE3W08823-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to SMA Female Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to SMA female cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SMA female cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assemblies have a male gender on end 1 and female on end 2. This BNC to SMA cable is a male to female coax assembly, PE3W08823-12, can also be known as a BNC plug to SMA jack cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA jack cable assembly PE3W08823-12 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08823-12 can also be used in the other direction and will be SMA female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA female cable 12 inch length using RG174 coax.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3C2882LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMA Male Cable Using PE-SR047AL Coax, LF Solder. PE3C2882LF is a Mini SMP female to SMA male cable using PE-SR047AL coax. This Pasternack Mini SMP female to SMA male cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female Mini SMP to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C2882LF Mini SMP female to SMA male cable assembly is constructed with PE-SR047AL coax.

Relay Specialties

645-1304/8820

BlockMaster Blocks

Spring Clamp Terminal Block 4-position; 3.50mm; PCB Mount

1 : $1.21
10 : $1.19
25 : $1.18
50 : $1.16
100 : $1.15

2,240

20108-82

Deltrol Controls

Power Relay; 24 VAC 2C DPDT; 10A; Plug-In 8-Pin Octal

1 : $33.05
10 : $30.84
25 : $28.92
100 : $22.39
500 : $20.41

20238-82

Deltrol Controls

Power Relay, 24 VAC 1X SPST-NO-DM, 30 Amps Base Mount, Screw Terminals

1 : $49.35
10 : $46.06
25 : $43.18
100 : $33.43
500 : $30.48

20308-82

Deltrol Controls

General Purpose Relay 24 VAC, 3C 3PDT, 13 Amps Plug-In, 11- Pin Blade

1 : $41.05
10 : $38.31
25 : $35.92
100 : $27.81
500 : $25.35

TE Connectivity

1-726388-2

TE Connectivity

187 FASTON,TAB,TPBR PCB Terminal Type: Tab Mating Tab Width: .187 in Mating Tab Width: 4.75 mm PCB Hole Diameter: 1.4 mm PCB Hole Diameter: .055 in Tab .187" 4.75 mm 1.4 mm | .187" | TE Connectivity
RoHS : Compliant

1,000 : $0.18
100 : $0.25
10 : $0.3
1 : $0.4

47,647

1-215882-6

TE Connectivity

16 WAY BLACK MK II RECP Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Row-to-Row Spacing: 2.54 mm Wire-to-Board 16 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $1.4
500 : $1.44
50 : $1.64
10 : $2.18
1 : $2.24

9,996

1-188275-2

TE Connectivity

12P, MM 1.27, FOB, TE, SMD, T&R Connector System: Board-to-Board Number of Positions: 12 Centerline (Pitch): 1.27 mm Centerline (Pitch): .05 in PCB Mount Retention: Without Board-to-Board 12 1.27 mm .05" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $3.9
500 : $4.02
250 : $4.14
100 : $4.26
50 : $4.37
25 : $4.49
10 : $4.61
1 : $4.73

7,363

1-215882-0

TE Connectivity

10 WAY BLACK MK II RECP Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Row-to-Row Spacing: 2.54 mm Wire-to-Board 10 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $1.72
500 : $1.79
10 : $2.38
1 : $2.8

5,248

1-2328823-1

TE Connectivity

LUMAWISE S 80MM DIA DOME CLEAR LOW Lighting Product Type: Dome Primary Product Color: Natural Product Height: 1.316 in Product Height: 33.43 mm Lighting Connector Features Included: Keyed Not Vented Dome Natural 1.316" 33.43 mm | 1.316" | TE Connectivity
RoHS : Compliant

100 : $3.82
50 : $4.0
25 : $4.19
10 : $4.37
1 : $4.55

4,743

1-188275-0

TE Connectivity

10P, MM 1.27, FOB, TE, SMD, T&R Connector System: Board-to-Board Number of Positions: 10 Centerline (Pitch): 1.27 mm Centerline (Pitch): .05 in PCB Mount Retention: Without Board-to-Board 10 1.27 mm .05" | Ampseal Header | TE Connectivity
RoHS : Compliant

2,500 : $3.26
1,000 : $3.35
500 : $3.43
250 : $3.52
100 : $3.61
50 : $3.7
25 : $3.79
10 : $3.87
1 : $3.96

3,847

1-188275-4

TE Connectivity

14P, MM 1.27, FOB, TE, SMD, T&R Connector System: Board-to-Board Number of Positions: 14 Centerline (Pitch): 1.27 mm Centerline (Pitch): .05 in PCB Mount Retention: Without Board-to-Board 14 1.27 mm .05" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $4.76
500 : $4.9
250 : $5.05
100 : $5.19
50 : $5.34
25 : $5.48
10 : $5.63
1 : $5.77

2,081

1452388-2

TE Connectivity

SECONDARY LOCK FOR 96 POS CONN Primary Product Color: Red Connector & Contact Retention Accessory Type: Secondary Lock Primary Product Material: PA 66 GF25 Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Red Secondary Lock | PA 66 GF25 | TE Connectivity
RoHS : Compliant

10,000 : $0.29
5,000 : $0.36
2,500 : $0.49
1,000 : $0.65
500 : $0.97
100 : $1.17

1,589

1-188275-6

TE Connectivity

16P, MM 1.27, FOB, TE, SMD, T&R Connector System: Board-to-Board Number of Positions: 16 Centerline (Pitch): 1.27 mm Centerline (Pitch): .05 in PCB Mount Retention: Without Board-to-Board 16 1.27 mm .05" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $5.42
500 : $5.59
250 : $5.75
100 : $5.92
50 : $6.08
25 : $6.25
10 : $6.41
1 : $6.58

1,519

1-2328823-3

TE Connectivity

LUMAWISE S 80MM DIA DOME CLEAR TALL Lighting Product Type: Connector Primary Product Color: Natural Product Height: 58.43 mm Lighting Connector Features Included: Not Vented Keyed Compatible With Agency/Standards Products: Zhaga Connector Natural 58.43 mm Not Vented | TE Connectivity
RoHS : Compliant

100 : $4.91
50 : $5.14
25 : $5.37
10 : $5.61
1 : $5.84

1,197

1-640388-2

TE Connectivity

12P MTA156 HDR ASSY RN STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 12 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $0.6
100 : $0.81
10 : $1.0
1 : $1.26

507

1-2487882-2

TE Connectivity

Floating BTB Rec 8.45mm H, 120Pos PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 120 PCB Mount Header Right Angle Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $6.5
50 : $7.38
25 : $7.75
10 : $8.27
1 : $9.73

294

1-2328823-2

TE Connectivity

LUMAWISE S 80MM DIA DOME CLEAR MEDIUM Lighting Product Type: Connector Primary Product Color: Natural Product Height: 43.43 mm Lighting Connector Features Included: Not Vented Keyed Compatible With Agency/Standards Products: Zhaga Connector Natural 43.43 mm Not Vented | TE Connectivity
RoHS : Compliant

100 : $4.48
50 : $4.7
25 : $4.91
10 : $5.13
1 : $5.34

113

1-2823588-2

TE Connectivity

M12 D-90 DEGR-F-4,CAT 5 RADOX 7.3MM, H&S Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 17 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 4 17 | Ampseal Header | TE Connectivity
RoHS : Compliant

50 : $385.3
25 : $407.97
10 : $430.63
1 : $453.3

163088-2

TE Connectivity

LOOSE PC SOCKET TYPEIII+ CONTACT SIZE16 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 24 – 20 AWG Wire Size: .2 – .5 mm² Gold (Au) Socket Gold Flash 24 – 20 AWG | TE Connectivity
RoHS : Compliant

2,500 : $3.13
1,000 : $3.21
500 : $3.29
250 : $3.38
100 : $3.46
50 : $3.55
25 : $3.63
10 : $3.72
1 : $3.8