887-1-R220F Price, Distributor, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to MMCX Plug Cable 72 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to MMCX plug cable 72 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MMCX plug cable 72 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our SMA to MMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MMCX cable is a male to plug coax assembly, PE34887-72, can also be known as a SMA plug to MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE34887-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34887-72 can also be used in the other direction and will be MMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug cable 72 inch length using RG188 coax.

1 : $62.99
25 : $59.84
50 : $56.69
100 : $54.17

1,160

PE3W10887

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 2.2-5 Male to QMA Male Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to QMA male low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to QMA male low PIM cable using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10887 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10887 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to QMA male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to QMA plug cable assembly PE3W10887 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10887 can also be used in the other direction and will be a QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to QMA low PIM RF cable assembly as per your requirements.

310

PE3C2887/HS2-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Male Cable 6 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-6, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-6 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-6 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink.

1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43

237

PE3C8874/BR-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BR-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BR-36 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BR-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BR coax.

1 : $50.99
25 : $48.44
50 : $45.89
100 : $43.85

PE3C8874/YW-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/YW-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/YW-120 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/YW-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-YW coax.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE3C8874/YW-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/YW-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/YW-300 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/YW-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax.

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3C8875/BK-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BK, RF Cable Type: Belden 1855A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BK Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BK coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BK-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BK-120 is built with Belden 1855A-BK which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BK coax.

1 : $80.99
25 : $76.94
50 : $72.89
100 : $69.65

PE3C8873/GR-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/GR-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax.

1 : $71.99
25 : $68.39
50 : $64.79
100 : $61.91

PE3C8873/WH-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/WH-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/WH-36 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-WH coax.

1 : $40.79
25 : $38.75
50 : $36.71
100 : $35.08

PE3C8873/WH-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/WH-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/WH-120 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax.

1 : $56.99
25 : $54.14
50 : $51.29
100 : $49.01

PE3887-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Male Cable 12 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to N male cable 12 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 12 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3887-12, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3887-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3887-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 12 inch length using RG402 coax.

1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47

PE3C4887-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to N Male Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a plug gender on end 1 and male on end 2. This BMA to N type cable is a plug to male coax assembly, PE3C4887-60, can also be known as a BMA male to type N plug cable assembly and will be shipped same-day as it is purchased. BMA male to type N plug cable assembly PE3C4887-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA plug bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4887-60 can also be used in the other direction and will be type N male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable 60 inch length using RG405 coax.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W16887

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-FR Coax. PE3W16887 is a N male to N male right angle cable using LMR-600-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16887 N male to N male right angle cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W16887LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-FR Coax with HeatShrink, LF Solder. PE3W16887LF/HS is a N male to N male right angle cable using LMR-600-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16887LF/HS N male to N male right angle cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18876

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Cable Using RG316 Coax. PE3W18876 is a TNC female bulkhead to SMA male right angle cable using RG316 coax. This Pasternack TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18876 TNC female bulkhead to SMA male right angle cable assembly is constructed with RG316 coax.

TE Connectivity

170887-1

TE Connectivity

SLEEVE DIA5 SHUR PLUG NAT Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Primary Product Material: Vinyl Primary Product Color: Natural Packaging Method: Bag Insulation Sleeve Straight Vinyl Natural | Insulation Boots & Sleeve | Part Number: 170887-1 | Internal Number: 170887-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.07
1,000 : $0.09
500 : $0.09
250 : $0.1
100 : $0.11
50 : $0.12
25 : $0.14
10 : $0.16
1 : $0.21

37,670

188746-1

TE Connectivity

CONTACT REC HE13 COSI GOLD PLATED Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 28 – 24 AWG Wire Size: .08 – .24 mm² Gold (Au) Socket Tin 28 – 24 AWG | He13/he14 Contact | Part Number: 188746-1 | Internal Number: 188746-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.63
5,000 : $0.64
2,500 : $0.66
1,000 : $0.67
500 : $0.69
250 : $0.7
100 : $0.71
50 : $0.73
25 : $0.74
10 : $0.76
1 : $0.77

27,320

1-178288-7

TE Connectivity

DYNAMIC D3100S REC HSG 8P X Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 8 Receptacle Housing With | Part Number: 1-178288-7 | Internal Number: 1-178288-7 | TE Connectivity
RoHS : Compliant

1,000 : $1.64
500 : $1.69
250 : $1.74
100 : $1.79
50 : $1.84
25 : $1.89
10 : $1.94
1 : $1.99

23,007

926887-1

TE Connectivity

UNIV.M-N-L.PIN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Pin 20 – 14 AWG | Connector Contact | Part Number: 926887-1 | Internal Number: 926887-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.14
1,000 : $0.16
500 : $0.17
250 : $0.18
100 : $0.21
50 : $0.23
25 : $0.25
10 : $0.29
1 : $0.39

7,241

1718879-2

TE Connectivity

RETAINER, 5-6POS. HSG. Number of Positions: 6 Primary Product Color: Natural Connector & Contact Retention Accessory Type: Retainer Primary Product Material: PBT GF10 Operating Temperature Range: -40 – 105 °C Automotive Connector Lock & Position Assurance | 6 Natural | Part Number: 1718879-2 | Internal Number: 1718879-2 | PBT GF10 | TE Connectivity
RoHS : Compliant

10,000 : $0.37
5,000 : $0.46
2,500 : $0.61
1,000 : $0.81
500 : $1.22
100 : $1.46

3,945

5558872-1

TE Connectivity

MJ,TE,4P,W/0 PNL STOPS Connector Profile: Standard Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Connector Contact Density: Standard Modular Connector Style: Jack PCB Mount Orientation: Vertical Standard RJ Type Jacks & Plugs | Rj22 Connector | Part Number: 5558872-1 | Internal Number: 5558872-1 | Alias Number: A08646-000 | TE Connectivity
RoHS : Compliant

1,000 : $1.24
100 : $1.29
50 : $1.43
10 : $1.54
1 : $1.85

3,079

5788794-1

TE Connectivity

25 HTMSFL PLUG RA 318 (IN,BL) Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5788794-1 | Internal Number: 5788794-1 | 3 | TE Connectivity
RoHS : Compliant

1,000 : $6.43
500 : $6.61
250 : $6.82
100 : $7.05
50 : $7.25
1 : $7.96

1,569

5788796-2

TE Connectivity

09 HTMSFL ASSY RA 318 (IN,BL) Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Board-to-Board Board Mount | Part Number: 5788796-2 | Internal Number: 5788796-2 | 1 | TE Connectivity
RoHS : Compliant

1,000 : $3.24
500 : $3.33
250 : $3.43
100 : $3.55
50 : $3.65
1 : $4.01

1,011

1658871-1

TE Connectivity

XFP CAGE ASSY W/ INSULATING TA Pluggable Form Factor: XFP Pluggable I/O Product Type: Cage Assembly Sealable: Yes Circuit Application: Signal Operating Temperature Range: -10 – 70 °C XFP Cage Assembly | High Speed I/o | Part Number: 1658871-1 | Internal Number: 1658871-1 | TE Connectivity
RoHS : Compliant

1,000 : $22.15
500 : $22.78
250 : $23.49
100 : $24.28
50 : $24.98
1 : $27.42

762

1888781-1

TE Connectivity

Cage Assy Behind Bezel QSFP Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Sealable: Yes Circuit Application: Signal Number of Ports: 1 QSFP+ Cage Signal | High Speed I/o | Part Number: 1888781-1 | Internal Number: 1888781-1 | TE Connectivity
RoHS : Compliant

1,000 : $9.25
500 : $9.51
250 : $9.81
100 : $10.13
50 : $10.43
1 : $11.45

611

640388-7

TE Connectivity

07P MTA156 HDR ASSY RN STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | PCB Header & Receptacle | Part Number: 640388-7 | Internal Number: 640388-7 | TE Connectivity
RoHS : Compliant

1,000 : $0.26
100 : $0.34
10 : $0.42
1 : $0.54

435

RP73PF1E887RBTD

TE Connectivity

RP 1E 0.1W 887R 0.1% 25PPM 5K RL Part Number: RP73PF1E887RBTD | Internal Number: 8-2176305-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.26
1,000 : $0.26
500 : $0.27
250 : $0.28
100 : $0.29
50 : $0.29
25 : $0.3
10 : $0.31
1 : $0.31

174

5748873-1

TE Connectivity

AMP III PLUG 25P RA 590 THD IN Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5748873-1 | Internal Number: 5748873-1 | TE Connectivity
RoHS : Compliant

1,000 : $14.17
500 : $14.57
250 : $15.03
100 : $15.53
50 : $15.98
1 : $17.54

110

5788799-1

TE Connectivity

15 HTMSFL ASSY RA 318 (SL,BL) Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Receptacle Board-to-Board Board Mount | Part Number: 5788799-1 | Internal Number: 5788799-1 | 2 | TE Connectivity
RoHS : Compliant

1,000 : $9.95
500 : $10.24
250 : $10.55
100 : $10.91
50 : $11.22
1 : $12.32

5788793-1

TE Connectivity

09 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5788793-1 | Internal Number: 5788793-1 | TE Connectivity
RoHS : Compliant

1,000 : $4.86
500 : $5.0
250 : $5.15
100 : $5.32
50 : $5.48
1 : $6.01

Teledyne HiRel

5962-88755012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

5962-88702012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE
RoHS : Not Compliant

5962-8871306SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8872401LA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10 OUTPUT AND-OR
RoHS : Not Compliant

5962-88726043A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 20 NS ACCESS TIME
RoHS : Not Compliant

5962-8873903XA

Teledyne HiRel

MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 70 NS MULTIPLY TIME
RoHS : Not Compliant

5962-8870501LA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8871306RA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8872608LA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 10 NS ACCESS TIME
RoHS : Not Compliant

5962-88726123A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-88735033A

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8875601BFA

Teledyne HiRel

DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE
RoHS : Not Compliant

5962-88726033A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8871302RA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

5962-8871310SA

Teledyne HiRel

PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-RE-8870CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;887R;�0.25%
RoHS : Compliant

MELFC0102-RZ-8870DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;887R;�0.5%
RoHS : Compliant

MELFC0102-YE-8872DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;88.7K;�0.5%
RoHS : Compliant

MELFC0204-TC-8873CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;887K;�0.25%
RoHS : Compliant

MELFC0204-TN-8871BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;8.87K;�0.1%
RoHS : Compliant

MELFC0207-XC-8872CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;88.7K;�0.25%
RoHS : Compliant

MELFC0207-XE-8870CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;887R;�0.25%
RoHS : Compliant

MELFC0207-XZ-8870DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;887R;�0.5%
RoHS : Compliant

MELFM0204-ZE-8870FT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;887R;�1%
RoHS : Not Compliant

CR1206-8W-8871DT

VENKEL LTD

Chip Resistor;1206;1/8W;8.87K;�0.5%
RoHS : Compliant

CR2512-1W-8873FT

VENKEL LTD

Chip Resistor;2512;1W;887K ;�1%
RoHS : Compliant

CRS0201-20W-8872FT

VENKEL LTD

Anti-Sulfuration CR;0201;1/20W;88.7K;�1%
RoHS : Compliant

HPTF0603-SE-8871FT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;8.87K;�1%
RoHS : Compliant

HPTF0805-RC-8871AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�50PPM;8.87K;�0.05%
RoHS : Compliant

HPTF1206-TC-8871UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;8.87K;�0.01%
RoHS : Compliant

Vyrian

CRCW0402887RFKEDC

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.063W, 887ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402
RoHS : Compliant

17,870

MAX8878C/W4.3

Analog Devices Inc

Fixed Positive LDO Regulator, 4.3V

11,245

MAX8874RC/D

Analog Devices Inc

10,803

MAX5887EVKIT

Analog Devices (Maxim Integrated)

10,660

MAX8877EUK30+T

Analog Devices Inc

Fixed Positive LDO Regulator, 3V, 0.12V Dropout, CMOS, PDSO5
RoHS : Compliant

10,518

MAX8878EUK24-T

Analog Devices Inc

Fixed Positive LDO Regulator, 2.4V, 0.12V Dropout, PDSO5
RoHS : Not Compliant

9,973

LTC3887EUJ#WPBF

Analog Devices Inc

Switching Controller, Current-mode, CMOS, PQCC40
RoHS : Compliant

9,892

MAX8875EUK25+

Analog Devices Inc

Fixed Positive LDO Regulator, 2.5V, 0.22V Dropout, PDSO5
RoHS : Compliant

9,733

MAX8887EZK19

Analog Devices Inc

Fixed Positive LDO Regulator, 1.9V, BICMOS, PDSO5
RoHS : Not Compliant

8,457

MAX8877C/W2.6

Analog Devices Inc

Fixed Positive LDO Regulator, 2.6V

7,735

MAX8877C/D50

Analog Devices Inc

Fixed Positive LDO Regulator, 5V, 0.12V Dropout
RoHS : Not Compliant

6,433

MAX8878C/W32

Analog Devices Inc

Fixed Positive LDO Regulator, 3.15V, 0.12V Dropout
RoHS : Not Compliant

6,232

MAX8877C/W33

Analog Devices Inc

Fixed Positive LDO Regulator, 3.3V, 0.12V Dropout
RoHS : Not Compliant

5,763

PIC16LF18875-I/P

Microchip Technology Inc

RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP40
RoHS : Compliant

5,317

DS12887

Dallas Semiconductor

Real Time Clock, Non-Volatile, 1 Timer(s), CMOS, PDIP24

328

Waytek, Inc.

131887-91

General Cable Technologies Corporation

16GA GXL Violet Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.1596
1,000 : $0.1405
2,500 : $0.113
5,000 : $0.102

113,500

7100163887

22-18GA Female Disconnect Red Nylon .250 X .032 Fully Insulated

50 : $0.1716
200 : $0.1615
500 : $0.1544
1,000 : $0.1453

89,727

Win Source Electronics

GR8875NRKAG

Grenergy Opto Inc

1,035 : $0.3259
775 : $0.3636
600 : $0.3761
435 : $0.3886
280 : $0.4012
115 : $0.4889

65,000

DRV8876PWPT

Texas Instruments

IC MOTOR DRIVER DC 5.5V 16HTSSOP / Unipolar Motor Driver NMOS PWM 16-HTSSOP
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

53,030

MAX8887EZK33

Maxim Integrated Products

Low-Dropout, 300mA Linear Regulators in SOT23
RoHS : Not Compliant

540 : $0.6273
405 : $0.6997
310 : $0.7239
225 : $0.7479
150 : $0.7721
60 : $0.9409

10,702

AX88796BLF

ASIX Electronics Corporation

Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller / Ethernet CTLR Single Chip 10Mbps/100Mbps 1.8V/3.3V 64-Pin LQFP
RoHS : Compliant

35 : $8.797
26 : $9.8121
20 : $10.1504
15 : $10.4888
10 : $10.8271
4 : $13.1955

10,000

PIC16F18876T-I/MV

Microchip Technology Inc

IC MCU 8BIT 28KB FLASH 40UQFN / PIC PIC® XLP™ 16F, Functional Safety (FuSa) Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 40-UQFN (5x5)
RoHS : Compliant

127 : $3.0792
95 : $3.4345
73 : $3.5529
53 : $3.6714
35 : $3.7897
15 : $4.6187

6,000

FDMC8878

Fairchild Semiconductor Corporation

MOSFET N-CH 30V 9.6A POWER33
RoHS : Compliant

330 : $1.0282
265 : $1.0699
205 : $1.1117
145 : $1.1953
95 : $1.237
45 : $1.3207

5,955

NCV887000D1R2G

onsemi

IC REG CTRLR BOOST/FLYBACK 8SOIC
RoHS : Compliant

91 : $3.3282
68 : $3.7122
53 : $3.8403
38 : $3.9683
25 : $4.0963
11 : $4.9923

5,569