| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Component Electronics, Inc | CR0805F5901T1
| Chip Technologies Inc | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $0.08
100 : $0.09
1 : $0.12
|
| 7,800
 |
2322-734-63901L
| YAGEO Corporation | IN STOCK SHIP TODAY | 1,000 : $0.05
100 : $0.06
1 : $0.08
|
| 4,600
|
901
| Zierick Manufacturing Corporation | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.6
100 : $0.69
1 : $0.92
|
| 1,222
|
7901-09MMNB
| OUPIIN AMERI | IN STOCK SHIP TODAY | | 137
|
MMBR901
| | IN STOCK SHIP TODAY | | 100
|
595D337X9010R
| Vishay Intertechnologies | IN STOCK SHIP TODAY | 1,000 : $2.0
100 : $2.31
1 : $3.08
|
| 54
|
901
| Keystone Electronics Corp | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $1.25
100 : $1.44
1 : $1.92
|
| 50
|
NTLLD4901NF
| onsemi | IN STOCK SHIP TODAY | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 50
|
90122-0122
| Molex | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 50
|
90120-0124
| Molex | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 25
|
90130-1210
| Molex | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $1.0
100 : $1.15
1 : $1.54
|
| 8
|
M39019/01-226
| Airpax | IN STOCK SHIP TODAY | 1,000 : $200.0
100 : $230.77
1 : $307.69
|
| 6
|
M39012/19-0102
| Kings Electronics | IN STOCK SHIP TODAY | 1,000 : $25.0
100 : $28.85
1 : $38.46
|
| 4
|
3-1393190-1
| TE Connectivity | IN STOCK SHIP TODAY | 1,000 : $1.0
100 : $1.15
1 : $1.54
|
| 3
|
J7KNA-09-01-24D
| OMRON Corporation | IN STOCK SHIP TODAY | 1,000 : $25.0
100 : $28.85
1 : $38.46
|
| 2
|
Pasternack Enterprises US | PE3C0990-120
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0990-120 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0990-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax. | 1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07
|
| 156
|
PE7390-10
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.2:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Aluminum. 10 dB Fixed Attenuator, N Male to N Female Aluminum Body Rated to 5 Watts Up to 3 GHz. PE7390-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7390-10 10 dB attenuator is rated for up to 3 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. Our fixed RF attenuator PE7390-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $132.99
25 : $126.34
50 : $119.69
100 : $114.37
|
| 76
|
M39012/25-0006
| Pasternack Enterprises | Key Specifications, Connector Series: BNC, Connector Gender: Male, Chain Option: Chain. BNC Male Open Circuit Connector Cap With 2.25 Inch Chain. Pasternack’s M39012/25-0006 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a BNC connector series and a male gender. Our BNC male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 2.25-inch long chain to prevent loss and misplacement. Our M39012/25-0006 dust cap has a length of 0.67 inches, a width of 3.9 inches, and a height of 0.6 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this BNC male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0006 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements. | 1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95
|
| 32
|
PE3C3190-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm SMC Jack to 75 Ohm BNC Male Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm SMC jack to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMC jack to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assembly has jack gender on end 1 and male on end 2. PE3C3190-12 can also be known as a SMC female to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMC female to BNC plug cable assembly PE3C3190-12 is built with RG179 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C3190-12 RF cable are available on our downloadable PDF datasheet.PE3C3190-12 can also be used in the other direction and will be BNC male to SMC jack cable assembly if the opposite connectivity is required. SMC female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMC RF cable assembly as per your requirements. | 1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31
|
| 17
|
PE3W06519/PH90-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax with 90 Deg. Clock., Radio frequency assembly SMP female right angle to SMP female right angle cable 18 inch length using PE-SR405FLJ coax with 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable 18 inch length using PE-SR405FLJ coax with 90 deg. clock, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W06519/PH90-18 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W06519/PH90-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 18 inch length using PE-SR405FLJ coax with 90 deg. clock. | 1 : $280.99
25 : $266.94
50 : $252.89
100 : $241.65
|
| 7
|
PE7090-15
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.4:1, Attenuation: 15 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 15 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7090-15 is a fixed 15 dB attenuator from Pasternack. This 15dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7090-15 15 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7090-15 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 15dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $383.99
10 : $368.63
25 : $353.27
|
| 7
|
PE70A3901
| Pasternack Enterprises | Key Specifications, Design: USB Controlled, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.2 Watt, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Series 2: 2.92mm, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 30 dB. 30 dB Programmable USB Controlled Attenuator, 2.92mm Female to 2.92mm Female, 1 dB Steps From 100 MHz to 40 GHz. PE70A3901 is a programmable attenuator from Pasternack. Our 2.92mm attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a 2.92mm female for connector 2. PE70A3901 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 30 dB with 0dB step sizes. Our programmable RF attenuator has frequency range of 100 MHz to 40 GHz and a maximum VSWR of 0. This adjustable SMA attenuator is rated to 0.2 Watt at the stated attenuation. Our attenuator PE70A3901 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $4,940.0
5 : $4,742.4
10 : $4,544.8
|
| 5
|
PE71S9016
| Pasternack Enterprises | Key Specifications. Connector Series SMA Connector Gender Female Maximum Frequency 26.5 GHz Insertion Loss, Maximum 0.5. SP2T SMA Manual Toggle Switch DC to 26.5 GHz, Rated to 30 Watts., The manual switch from Pasternack PE71S9016 is one of a huge selection of coaxial switching products for radio, antenna and other types of RF components that are specifically ready for quick shipment. This manual switch is manufactured in a SPDT design with a manual toggle actuator. Our coaxial SPDT manual switch has an SMA connector with a female configuration. This RF coaxial SPDT manual toggle switch is rated for a maximum frequency of 26.5 GHz. Pasternack’s SPDT manual switch has a maximum VSWR of 1.5:1. The PE71S9016 RF coaxial manual switch with SMA connector comes with a 50 Ohm impedance along with 0.5 dB of maximum insertion loss. Our high-quality 26.5 GHz manual toggle switch has 40 dB minimum isolation. Additional dimensions and specifications for this SPDT manual toggle switch are on our downloadable PDF datasheet above. Our 50 Ohm SPDT manual switch is a great option for test and measurements, redundancy systems, manual switching between antenna bands and OEM front panel control applications. The PE71S9016 manual toggle switch from Pasternack has a length of 1.34 inches, width of 0.5 inches and height of 1.97 inches. Our PE71S9016 manual switch with SMA connector is rated for a maximum input power (CW) of 80 Watts. Pasternack is where to buy a 26.5 GHz SPDT RF manual switch for quick shipment worldwide, and this PE71S9016 is just one of more than a million parts we have available. We also stock a wide selection of other 50 Ohm radio frequency switches that will ship the same business day. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF SPDT manual toggle switch as per your requirements. | 1 : $1,600.0
5 : $1,568.0
10 : $1,536.0
25 : $1,504.0
|
| 0
|
PE3901-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50. BNC Male to BNC Female Cable 48 Inch Length Using RG188 Coax. PE3901-48 is a BNC male to BNC female cable using RG188 coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3901-48 BNC male to BNC female cable assembly is constructed with RG188 coax and the maximum VSWR is 1.4:1. | 1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65
|
| 0
|
PE39013
| Pasternack Enterprises | | | 0
|
PE39424/PH90-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Male Right Angle Cable 12 Inch Length Using PE-SR402FL Coax with 90 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle cable 12 inch length using PE-SR402FL coax with 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 12 inch length using PE-SR402FL coax with 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE39424/PH90-12 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE39424/PH90-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 12 inch length using PE-SR402FL coax with 90 deg. clock. | 1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5
|
| 0
|
PE3C109017
| Pasternack Enterprises | | | 0
|
PE3C9016
| Pasternack Enterprises | | | 0
|
PE3C9490-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Jack to SHV Jack Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SHV jack to SHV jack cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack cable 12 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9490-12 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9490-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female to SHV female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack cable 12 inch length using RG58 coax. | 1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27
|
| 0
|
PE3MSA00590-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free LSZH 3-Lug TRB Bulkhead Insulated Jack with Blunt Cut for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00590-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00590-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00590-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable. | 1 : $297.99
25 : $283.09
50 : $268.19
100 : $256.27
|
| 0
|
Teledyne HiRel | 80019012A
 | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant | | 0
 |
5962-9098901M3A
 | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, ASYNCHRONOUS, 35 NS
RoHS : Not Compliant | | 0
|
M38510/34901BDA
 | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT
RoHS : Not Compliant | | 0
|
5962-8753901LA
| Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT, 25 NS
RoHS : Not Compliant | | 0
|
5962-8775901BRA
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-8775901MSA
| Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-8775901RA
 | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-8866901UA
| Teledyne HiRel | FIFO MEMORY, 2K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant | | 0
|
5962-9098901MLA
 | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, ASYNCHRONOUS, 35 NS
RoHS : Not Compliant | | 0
|
5962-8968901EA
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
M38510/30901BFA
 | Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT
RoHS : Not Compliant | | 0
|
M38510/31901BEA
 | Teledyne HiRel | REGISTER FILE, 4 X 4, 3-STATE OUTPUTS
RoHS : Not Compliant | | 0
|
5962-8752901KA
 | Teledyne HiRel | PROM, UV ERASABLE, 2K X 8, REGISTERED, 45 NS SETUP TIME
RoHS : Not Compliant | | 0
|
5962-8762901RA
| Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant | | 0
|
5962-89539012A
| Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant | | 0
|
Wuhan P&S | LM2901DR2G
 | onsemi | Single Supply Quad Comparators
RoHS : Compliant | 1 : $0.27
100 : $0.17
500 : $0.14
1,000 : $0.13
|
| 340,000
|
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British