| Electronic Components Datasheet Search |
|
95320480BCNDMNTHCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DB Roberts | 9295-32-SPRING | HA Guden Co Inc |
| 1,000 | ||
| SPL49532 | Spiralock | #10-32 SPL HI LIMIT PD GAGE |
| 13 | ||
| SPL59532 | Spiralock | M6X1.0 SPL Hi Limit PD Gage Standard Gage |
| 1 | ||
| 1953-2520-A | RAF Electronic Hardware | 0 | ||||
![]() Flip Electronics | PCA9532PW,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 11,770 | ||
PCA9532BS,118![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 10,137 | ||
PCA9532D,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 5,982 | |||
PCA9532PW,112![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,784 | ||
![]() Pasternack Enterprises US | PE3C4953-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-24, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-24 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-24 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax. |
| 18 | |
| PE3C9532-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to Straight Cut Lead Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 24 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-24 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-24 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-24 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3C9532 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Straight Cut Lead Cable Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. | 0 | |||
| PE3C9532-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Female Bulkhead to Straight Cut Lead Cable 6 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 6 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 6 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-6 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-6 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-6 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE39532 | Pasternack Enterprises | 0 | ||||
| PE3C9532-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to Straight Cut Lead Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-36 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-36 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3C9532-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to Straight Cut Lead Cable 48 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 48 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 48 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-48 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-48 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-48 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19532 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303HV, RF Cable Type: RG303 Hi Voltage, RF Cable Impedance: 50 Ohm. UHF Male to 10KV Male Cable Using RG303HV Coax. PE3W19532 is a UHF male to 10KV male cable using RG303 Hi Voltage coax. This Pasternack UHF male to 10KV male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm 10KV for connector 2. Our male UHF to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19532 UHF male to 10KV male cable assembly is constructed with RG303 Hi Voltage coax. | 0 | |||
| PE3C9532-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to Straight Cut Lead Cable 12 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 12 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 12 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-12 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-12 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-12 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE33953-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack to BNC Female Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMB jack to BNC female cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC female cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and female on end 2. PE33953-24 can also be known as a SMB female to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB female to BNC jack cable assembly PE33953-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33953-24 RF cable are available on our downloadable PDF datasheet.PE33953-24 can also be used in the other direction and will be BNC female to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE35953-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. FME Plug to FME Plug Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly FME plug to FME plug cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to FME plug cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a plug gender on end 1 and plug on end 2. This FME to FME cable is a plug to plug coax assembly, PE35953-24, can also be known as a FME male to FME male cable assembly and will be shipped same-day as it is purchased. FME male to FME male cable assembly PE35953-24 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to FME plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME male to FME male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to FME plug cable 24 inch length using RG58 coax. |
| 0 | ||
| PE3953-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Female to BNC Female Cable 24 Inch Length Using RG214 Coax., Radio frequency assembly BNC female to BNC female cable 24 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to BNC female cable 24 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3953-24, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3953-24 is built with RG214 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to BNC female cable 24 inch length using RG214 coax. |
| 0 | ||
| PE3C2953-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male Right Angle to N Female Bulkhead Low Loss Test Cable 200 cm Length Using PE-P300LL Coax., Radio frequency assembly N male right angle to N female bulkhead low loss test cable 200 cm length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low loss test cable 200 cm length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss test right angle type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C2953-200CM, can also be known as a low loss test right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C2953-200CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2953-200CM can also be used in the other direction and will be type N female bulkhead to right angle N type male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss test cable 200 cm length using PE-P300LL coax. |
| 0 | ||
| PE3C2953-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to N Female Bulkhead Low Loss Test Cable 24 Inch Length Using PE-P300LL Coax., Radio frequency assembly N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss test right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C2953-24, can also be known as a low loss test right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C2953-24 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2953-24 can also be used in the other direction and will be N type female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax. |
| 0 | ||
| PE3C7953-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 male right angle low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 4.3-10 cable is a male to male coax assembly, PE3C7953-200CM, can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7953-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7953-200CM can also be used in the other direction and will be right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male right angle low PIM cable 200 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
![]() Teledyne HiRel | 5962-8953202YA | Teledyne HiRel | BUS TRANSCEIVER, DUAL ASYNCHRONOUS RoHS : Not Compliant | 0 | ||
5962-8953202QA![]() | Teledyne HiRel | BUS TRANSCEIVER, DUAL ASYNCHRONOUS RoHS : Not Compliant | 0 | |||
5962-8953201XA![]() | Teledyne HiRel | BUS TRANSCEIVER, DUAL ASYNCHRONOUS RoHS : Not Compliant | 0 | |||
5962-8953202UA![]() | Teledyne HiRel | BUS TRANSCEIVER, DUAL ASYNCHRONOUS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | TFCR0402-16W-C-9532DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;95.3K;�0.5% RoHS : Compliant | 0 | ||
| TFCR0603-10W-C-9532FT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;95.3K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-9532BT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;95.3K;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-9532CT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;95.3K;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-9532CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;95.3K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-UE-9532DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;95.3K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TC-9532BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;95.3K;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-9532AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;95.3K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-9532DT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;95.3K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-9532CT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;95.3K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-9532BT | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;95.3K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-9532CT | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;95.3K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-9532FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;95.3K;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-9532BT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;95.3K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0207-XE-9532DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;95.3K;�0.5% RoHS : Not Compliant | 0 | |||
![]() Vyrian | M95320-BN3![]() | STMicroelectronics | RoHS : Not Compliant | 9,469 | ||
| M95320-DFDW6TP | STMicroelectronics | RoHS : Compliant | 8,254 | |||
| M95320-DRDW6TP | STMicroelectronics | EEPROM, 4KX8, Serial, CMOS, PDSO8 RoHS : Compliant | 6,802 | |||
M95320-BN1![]() | STMicroelectronics | RoHS : Not Compliant | 6,481 | |||
M95320-BN6![]() | STMicroelectronics | RoHS : Not Compliant | 5,489 | |||
| TMX99532NL | Texas Instruments | Modem, MOS, PDIP18 RoHS : Not Compliant | 4,596 | |||
M95320-DRDW3TP/K![]() | STMicroelectronics | RoHS : Compliant | 4,551 | |||
| M95320-DRDW8TP/K | STMicroelectronics | RoHS : Compliant | 4,459 | |||
| M95320-DFMN6TP | STMicroelectronics | RoHS : Compliant | 4,149 | |||
| M95320-DFMC6TG | STMicroelectronics | RoHS : Compliant | 3,907 | |||
| TMS99532NL | Texas Instruments | Modem, MOS, PDIP18 RoHS : Not Compliant | 3,667 | |||
| TMS99532JL | Texas Instruments | Modem, MOS, CDIP18 RoHS : Not Compliant | 3,415 | |||
| VG95328J1626PW | ITT Interconnect Solutions | MIL Series Connector, 26 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug RoHS : Unknown | 651 | |||
| VG95328M1626SY | ITT Interconnect Solutions | MIL Series Connector, 26 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug | 261 | |||
| VG95328M83ASNF0 | ITT Interconnect Solutions | MIL Series Connector, 3 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug | 219 | |||
![]() Win Source Electronics | PCA9532BS | Nexperia | 16-bit I2C LED dimmer |
| 60,000 | |
M95320-WMN6TP![]() | STMicroelectronics | IC EEPROM 32KBIT 10MHZ 8SO RoHS : Compliant |
| 32,995 | ||
M95320-WMN6![]() | STMicroelectronics | 64Kbit and 32Kbit Serial SPI Bus EEPROM With High Speed Clock RoHS : Compliant |
| 32,000 | ||
M95320-WMN6T![]() | STMicroelectronics | 64/32/16/8 Kbit Serial SPI Bus EEPROM With High Speed Clock RoHS : Compliant |
| 30,290 | ||
M95320-WMN6P![]() | STMicroelectronics | IC EEPROM 32KBIT 10MHZ 8SO RoHS : Compliant |
| 30,230 | ||
| PCA9532BS,118 | Nexperia | IC LED DRIVER LIN 25MA 24HVQFN / LED Driver 550uA Supply Current 24-Pin HVQFN EP T/R |
| 30,000 | ||
M95320-WMN6TP/P![]() | STMicroelectronics | IC EEPROM 32KBIT 10MHZ 8SO RoHS : Compliant |
| 29,510 | ||
CAT9532YI-T2![]() | onsemi | IC LED DRVR LIN DIM 25MA 24TSSOP / LED Driver 16 Segment 550uA Supply Current 24-Pin TSSOP T/R RoHS : Compliant |
| 16,000 | ||
| RT9532GQW | Richtek Technology Corp | IC BATT CHRGR LI-ION SGL 10WQFN RoHS : Compliant |
| 15,000 | ||
| PCA9532PW | Nexperia | LED Driver 550uA Supply Current 24-Pin TSSOP / 16-bit I2C LED dimmer |
| 10,000 | ||
| PCA9532PW,112 | Nexperia | IC LED DRIVER LIN 25MA 24TSSOP |
| 9,050 | ||
| PCA9532PW,118 | Nexperia | IC LED DRIVER LIN 25MA 24TSSOP / LED Driver 550uA Supply Current 24-Pin TSSOP T/R |
| 9,040 | ||
CSD19532Q5B![]() | Texas Instruments | 100 V N-Channel NexFET Power MOSFET RoHS : Compliant |
| 6,810 | ||
CSD19532Q5BT![]() | Texas Instruments | MOSFET N-CH 100V 100A VSON / Trans MOSFET N-CH Si 100V 100A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 6,790 | ||
CAT9532HV6I-GT2![]() | onsemi | IC LED DRVR LIN DIM 25MA 24TQFN RoHS : Compliant |
| 4,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |