C10-R027K Price, Distributor, Stock

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. MHF1 to SMA Male Cable Assembly Using O.D. 0.81mm Cable., Pasternack’s PE3C100090 MHF1 to SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA cable connection on the other. PE3C100090 can also be known as an MHF1 to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100090 RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to SMA male cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100090 can also be used in the other direction and will be an SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

PE3C100091-20CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 7.87 inches. MHF1 to SMA Male Right Angle Cable Assembly Using O.D. 0.81mm Cable, length = 200mm., Pasternack’s PE3C100091-20CM MHF1 to right angle SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and a right angle SMA cable connection on the other. PE3C100091-20CM can also be known as an MHF1 to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100091-20CM RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to right angle SMA male cable has a maximum VSWR of 1.55:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 7.87-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100091-20CM can also be used in the other direction and will be a right angle SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $14.99
25 : $14.39
50 : $13.94
100 : $13.64

PE3C10030/HS

Pasternack Enterprises

PE3C10047

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Bulkhead Cable Using LMR-195-UF Coax. PE3C10047 is a SMA female to SMA female bulkhead cable using LMR-195-UF coax. This Pasternack SMA female to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10047 SMA female to SMA female bulkhead cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10067/HS

Pasternack Enterprises

PE3C10128

Pasternack Enterprises

PE3C10148/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. 10-32 Female Bulkhead to SSMA Male Cable Using RG196 Coax with HeatShrink. PE3C10148/HS is a 10-32 female bulkhead to SSMA male cable using RG196 coax. This Pasternack 10-32 female bulkhead to SSMA male cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm SSMA for connector 2. Our female 10-32 bulkhead to male SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10148/HS 10-32 female bulkhead to SSMA male cable assembly is constructed with RG196 coax.

PE3C1016

Pasternack Enterprises

PE3C10173

Pasternack Enterprises

PE3C10209

Pasternack Enterprises

PE3C10254

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity TNC Plug Right Angle Low Loss Cable Using LMR-100A-UF Coax., Radio frequency assembly SMA male right angle to reverse polarity TNC plug right angle low loss cable using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to reverse polarity TNC plug right angle low loss cable using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle reverse polarity TNC cable connection on the other. Our low loss right angle SMA to right angle reverse polarity TNC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10254 can also be known as a low loss right angle SMA plug to right angle reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10254 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity TNC male cable assembly PE3C10254 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10254 can also be used in the other direction and will be a right angle reverse polarity TNC plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C1038/HS2

Pasternack Enterprises

PE3C10380

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. N Male to TNC Male Low Loss Cable Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to TNC male low loss cable using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss a type N to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10380 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10380 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to TNC plug cable assembly PE3C10380 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10380 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements.

PE3C10416

Pasternack Enterprises

PE3C10461

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. BNC Female to C Female Bulkhead Cable Using RG225 Coax. PE3C10461 is a BNC female to C female bulkhead cable using RG225 coax. This Pasternack BNC female to C female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm C for connector 2. Our female BNC to female C bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10461 BNC female to C female bulkhead cable assembly is constructed with RG225 coax.

TE Connectivity

MRSSV0DC10THT

TE Connectivity

MRSSV 2.54 GRA SD COM 10 T-H POST TUB Number of Positions: 10 Rotary Switch Type: Rotary DIP Number of Switches: 10 Operating Function: BDC Complement Circuit Actuator Style: Screwdriver Slot Actuator Sealed And Unsealed Rotary Switch | 10 Rotary DIP BDC Complement Circuit | Part Number: MRSSV0DC10THT | Internal Number: 2396233-5 | TE Connectivity
RoHS : Compliant

2,500 : $9.14
1,000 : $9.38
500 : $9.63
250 : $9.88
100 : $10.12
50 : $10.37
25 : $10.62
10 : $10.86
1 : $11.11

3,594

MRSSV1DC10SMJTR

TE Connectivity

MRSSV 2.54 BL SD COM 10 SMT J-LD T&R Number of Positions: 10 Rotary Switch Type: Rotary DIP Number of Switches: 10 Operating Function: BDC Complement Circuit Actuator Style: Screwdriver Slot Actuator Sealed And Unsealed Rotary Switch | 10 Rotary DIP BDC Complement Circuit | Part Number: MRSSV1DC10SMJTR | Internal Number: 2396234-1 | TE Connectivity
RoHS : Compliant

500 : $10.48
250 : $10.84
100 : $11.2
50 : $11.56
25 : $11.93
10 : $12.29
1 : $12.65

1,000

HSC10039RJ

TE Connectivity

HSC100 39R 5% Resistance Value: 39 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 39 Ω Wire Wound 5 % Power Resistor | Part Number: HSC10039RJ | Internal Number: 3-1625999-0 | TE Connectivity
RoHS : Compliant

10 : $24.51
1 : $27.24

769

C106R8JL

TE Connectivity

C10 6R8 5% (LOOSE) Resistance Value: 6.8 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 10 W Through-Hole Resistor | 6.8 Ω Wire Wound Power Resistor 5 % | Part Number: C106R8JL | Internal Number: 3-1623773-2 | TE Connectivity
RoHS : Compliant

250 : $4.83
100 : $5.03
50 : $5.22
25 : $5.41
10 : $5.61
1 : $5.8

471

HSC100600RJ

TE Connectivity

HSC100 600R 5% Resistance Value: 600 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 600 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100600RJ | Internal Number: 7-1625999-0 | TE Connectivity
RoHS : Compliant

10 : $24.53
1 : $27.25

HSC10022RF

TE Connectivity

HSC100 22R 1% Resistance Value: 22 Ω Element Type: Wire Wound Passive Component Tolerance: 1 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 22 Ω Wire Wound 1 % Power Resistor | Part Number: HSC10022RF | Internal Number: 9-1625999-1 | TE Connectivity
RoHS : Compliant

10 : $35.76
1 : $39.73

MTC100-JH1-P22

TE Connectivity

MTC100-JH1-P22 Connector & Housing Type: Plug Connector Product Type: Housing Kit Mating Alignment: With Mating Alignment Type: Keyed Mating Retention: With Plug Housing Kit With Keyed | Standard Rectangular Connector | Part Number: MTC100-JH1-P22 | Internal Number: 699693-000 | Alias Number: 6-1195491-6 | TE Connectivity
RoHS : Compliant

1 : $282.0

HSC100S68KJ

TE Connectivity

HSC100S 68K 5% Screw Terminal Resistance Value: 68K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 68K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S68KJ | Internal Number: 7-2176731-4 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100S1K5J

TE Connectivity

HSC100S 1K5 5% Screw Terminal Resistance Value: 1.5K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 1.5K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S1K5J | Internal Number: 5-2176731-4 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC100S470RJ

TE Connectivity

HSC100S 470R 5% Screw Terminal Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 470 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S470RJ | Internal Number: 4-2176731-8 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

HSC10047KJ

TE Connectivity

HSC100 47K 5% Resistance Value: 47K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 47K Ω Wire Wound 5 % Power Resistor | Part Number: HSC10047KJ | Internal Number: 3-1625999-5 | TE Connectivity
RoHS : Compliant

10 : $24.51
1 : $27.24

HSC100S33KJ

TE Connectivity

HSC100S 33K 5% Screw Terminal Resistance Value: 33K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 33K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S33KJ | Internal Number: 7-2176731-0 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

MRSSH4DC10SMGWTR

TE Connectivity

MRSSH 1.27 SS SD COM 10 SMT GULL T&R Number of Positions: 10 Rotary Switch Type: Rotary DIP Number of Switches: 10 Operating Function: BDC Complement Circuit Actuator Style: Screwdriver Slot Actuator Sealed And Unsealed Rotary Switch | 10 Rotary DIP BDC Complement Circuit | Part Number: MRSSH4DC10SMGWTR | Internal Number: 2396236-1 | TE Connectivity
RoHS : Compliant

250 : $11.4
100 : $11.85
50 : $12.31
25 : $12.76
10 : $13.22
1 : $13.67

HSC1004K7J

TE Connectivity

HSC100 4K7 5% Resistance Value: 4.7K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 4.7K Ω Wire Wound 5 % Power Resistor | Part Number: HSC1004K7J | Internal Number: 3-1625999-7 | TE Connectivity
RoHS : Compliant

10 : $24.51
1 : $27.24

HSC100S100RJ

TE Connectivity

HSC100S 100R 5% Screw Terminal Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 100 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S100RJ | Internal Number: 4-2176731-0 | TE Connectivity
RoHS : Compliant

10 : $45.43
1 : $50.48

Venkel Ltd.

AGTF0805-QC-1001FT

VENKEL LTD

Auto Grade Thin Film;0805;1/10W;�50PPM;1K;�1%
RoHS : Compliant

MELFC0102-YC-1071FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;1.07K;�1%
RoHS : Compliant

MELFC0204-TC-1022FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;10.2K;�1%
RoHS : Compliant

MELFC0204-TC-1051DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;1.05K;�0.5%
RoHS : Compliant

MELFC0204-TC-10R2DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;10.2R;�0.5%
RoHS : Compliant

MELFC0204-ZC-1022DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;10.2K;�0.5%
RoHS : Compliant

MELFC0204-ZC-1051BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;1.05K;�0.1%
RoHS : Compliant

MELFC0204-ZC-10R2BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;10.2R;�0.1%
RoHS : Compliant

MELFC0207-VC-1023FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;102K;�1%
RoHS : Compliant

MELFC0207-VC-1052DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;10.5K;�0.5%
RoHS : Compliant

MELFC0207-XC-1053CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;105K;�0.25%
RoHS : Compliant

MELFM0204-TC-1000FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�50PPM;100R;�1%
RoHS : Not Compliant

MELFM0204-TC-1021CT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�50PPM;1.02K;�0.25%
RoHS : Not Compliant

MELFM0204-ZC-1000DT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�50PPM;100R;�0.5%
RoHS : Not Compliant

MELFM0207-VC-1001FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;1K;�1%
RoHS : Not Compliant

Wuhan P&S

MMA02040C1000FB300

Vishay Intertechnologies

Professional Thin Film MELF Resistors
RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

101,580

MMB02070C1009FB200

Vishay Intertechnologies

Professional Thin Film MELF Resistors,10�� 1% 1W
RoHS : Compliant

1 : $0.53
100 : $0.18
500 : $0.17
1,000 : $0.16

56,000

VS-C10ET07T-M3

Vishay Intertechnologies

650 V Power SiC Merged PIN Schottky Diode, 10 A
RoHS : Compliant

1 : $4.27
100 : $1.54
500 : $1.11
1,000 : $1.03

23,000

MRS25000C1002FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

MRS25000C1004FCT00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.29
100 : $0.1
500 : $0.09
1,000 : $0.09

15,000

MRS25000C1001FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

SMM02040C1004FB300

Vishay Intertechnologies

Thin Film Mini-MELF Resistors,
RoHS : Compliant

1 : $0.23
100 : $0.08
500 : $0.07
1,000 : $0.07

12,000

TX3B336K020C1000

Vishay Intertechnologies

Tantalum capacitor, 33 ? F
RoHS : Unknown

1 : $0.97
100 : $0.33
500 : $0.3
1,000 : $0.29

4,000

MC10EL01DG

onsemi

5V ECL 4-Input OR/NOR
RoHS : Compliant

1 : $10.96
100 : $7.0
500 : $5.77
1,000 : $5.31

1,274

MC100LVEP05MNTXG

onsemi

RoHS : Compliant

1 : $16.48
100 : $10.52
500 : $8.68
1,000 : $7.98

1,000

MC100EL32DG

onsemi

5V ECL ��2 Divider
RoHS : Compliant

1 : $8.93
100 : $5.7
500 : $4.7
1,000 : $4.32

490

MC100EL15DG

onsemi

5V ECL 1:4 Clock Distribution Chip
RoHS : Compliant

1 : $6.98
100 : $4.45
500 : $3.67
1,000 : $3.38

240

MC100EPT23DG

onsemi

3.3V Dual Differential LVPECL/LVDS to LVTTL Translator
RoHS : Compliant

1 : $18.05
100 : $11.52
500 : $9.5
1,000 : $8.74

MC100EL01DG

onsemi

5V ECL 4-Input OR/NOR
RoHS : Compliant

1 : $8.93
100 : $5.7
500 : $4.7
1,000 : $4.32

STPSC10H065DLF

STMicroelectronics

Silicon Carbide Schottky Diode 650 V 10A
RoHS : Compliant

1 : $11.97
100 : $3.99
500 : $3.7
1,000 : $3.6

C10-R027K Distributor

Link URL