| Electronic Components Datasheet Search |
|
C1008F-R56M Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() NXP Semiconductors | PN7160A1EV/C100K | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,626 | |
| PN7160A1HN/C100E | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 1,206 | ||
| PN7160B1EV/C100K | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,657 | ||
| PN7160B1HN/C100E | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 1,355 | ||
| PN7161B1HN/C100E | NXP Semiconductors | EMV L1 Compliant NFC Controller with NCI Interface Supporting EMV and NFC Forum Applications with support for Apple ECP, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 385 | ||
| PN76ACEV/C100Y | NXP Semiconductors | Plug-and-Play NFC Controller Connecting to NXP's MCU and MPU Portfolio, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 975 | ||
![]() Microchip Technology Inc | RE46C100E8F | Microchip Technology Inc | Horn driver, PDIP, Projected EOL: 2036-03-31 RoHS : Compliant |
| 14,156 | |
| BM64SPKS1MC1-0004AA | Microchip Technology Inc | Class-1 43LD BLUETOOTH AUDIO MODULE WITH SHIELDING. 32x15mm, MODULE, Projected EOL: 2050-10-31 - Contact for Pricing RoHS : Compliant | 13,272 | |||
| ATWILC1000B-MU-Y042 | Microchip Technology Inc | SmartConnect Chipset WINC1000, VQFN, Projected EOL: 2040-10-19 RoHS : Compliant |
| 10,798 | ||
ATWILC1000B-MU-Y![]() | Microchip Technology Inc | SmartConnect Chipset WINC1000, VQFN, Projected EOL: 2046-01-23 RoHS : Compliant |
| 4,410 | ||
| VCC1A-B1C-100M000000 | Microchip Technology Inc | VCC1A-B1C-100M000000, LDFN, Projected EOL: 2050-12-02 RoHS : Compliant |
| 1,000 | ||
| DSC1001BL2-050.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 50MHz, 25PPM, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2046-08-11 RoHS : Compliant |
| 700 | ||
| VCC1-B1C-100M000000 | Microchip Technology Inc | VCC1-B1C-100M000000, LDFN, Projected EOL: 2046-01-24 RoHS : Compliant |
| 443 | ||
| ATWILC1000-SD | Microchip Technology Inc | WILC1000-SD, Projected EOL: |
| 74 | ||
| RE46C100S8F | Microchip Technology Inc | Horn driver, SOIC, Projected EOL: 2036-03-31 RoHS : Compliant |
| 71 | ||
| BM64SPKS1MC1-00M2AA | Microchip Technology Inc | Class-1 43LD BLUETOOTH AUDIO MODULE WITH SHIELDING. 32x15mm, MODULE, Projected EOL: 2046-03-22 RoHS : Compliant |
| 55 | ||
| DSC1000BL5-PROG | Microchip Technology Inc | MEMS OSC, BLANK, LVCMOS, 10PPM, 1.8-3.3V, -40 to 105C, 5.0 x 3.2mm, VDFN, Projected EOL: 2046-05-24 RoHS : Compliant |
| 43 | ||
| AC100200 | Microchip Technology Inc | LED Light Cube, Projected EOL: |
| 25 | ||
| DSC1000AL3-PROG | Microchip Technology Inc | MEMS OSC, BLANK, LVCMOS, 20PPM, 1.8-3.3V, -40 to 105C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-05-24 RoHS : Compliant |
| 2 | ||
| DSC1000DL5-PROG | Microchip Technology Inc | MEMS OSC, BLANK, LVCMOS, 10PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-05-24 RoHS : Compliant |
| 2 | ||
| DSC1000BL3-PROG | Microchip Technology Inc | MEMS OSC, BLANK, LVCMOS, 20PPM, 1.8-3.3V, -40 to 105C, 5.0 x 3.2mm, VDFN, Projected EOL: 2046-05-24 RoHS : Compliant |
| 1 | ||
![]() Rochester Electronics | MC100EL32D![]() | onsemi | Prescaler, 100EL Series, 1-Func, ECL, PDSO8 RoHS : Not Compliant |
| 10,709 | |
MC100EP196FA![]() | onsemi | Active Delay Line, Programmable, 1-Func, 1023-Tap, Complementary Output, ECL, PQFP32 RoHS : Not Compliant |
| 8,488 | ||
MC100EPT25D![]() | onsemi | ECL to TTL Translator, 1 Func, True Output, ECL, PDSO8 RoHS : Not Compliant |
| 34,318 | ||
MC100EPT26MNR4![]() | onsemi | MC100EPT26M - Voltage Level Translator Mixed Signal 2 Non-Inverted 8-SO RoHS : Not Compliant |
| 1,952 | ||
MC100LVEL14DWG![]() | onsemi | Low Skew Clock Driver, 100LVEL Series, 5 True Output(s), 0 Inverted Output(s), ECL, PDSO20 RoHS : Compliant |
| 15,204 | ||
MC100LVEL56DWR2G![]() | onsemi | Multiplexer, 100LVEL Series, 2-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, PDSO20 RoHS : Compliant |
| 1,670 | ||
MC100LVELT23DR2![]() | onsemi | PECL to TTL Translator, 2 Func, True Output, ECL, PDSO8 RoHS : Not Compliant |
| 5,493 | ||
MC100E158FNG![]() | onsemi | Multiplexer, 100E Series, 5-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, PQCC28 RoHS : Compliant |
| 4,645 | ||
MC100E446FNG![]() | onsemi | Parallel In Serial Out, 100E Series, 4-Bit, Right Direction, Complementary Output, ECL, PQCC28 RoHS : Compliant |
| 2,247 | ||
MC100EL11DTR2G![]() | onsemi | Low Skew Clock Driver, 100EL Series, 2 True Output(s), 0 Inverted Output(s), ECL, PDSO8 RoHS : Compliant |
| 7,500 | ||
MC100ELT25DT![]() | onsemi | ECL to TTL Translator, 1 Func, True Output, ECL, PDSO8 RoHS : Not Compliant |
| 1,621 | ||
| CY7C1361C-100BZXE | Infineon Technologies AG | Standard 9Mbit 256k x 36 3.135V - 3.6V Parallel 100MHz 8.5ns 165-BGA Tray RoHS : Compliant |
| 1,041 | ||
EPM7064BTC100-7![]() | Altera Corporation | EE PLD, 3.5ns, 64-Cell, CMOS, PQFP100 RoHS : Not Compliant |
| 55 | ||
EPM7128ATC100-10F![]() | Altera Corporation | EE PLD, 10ns, 128-Cell, CMOS, PQFP100 RoHS : Not Compliant |
| 268 | ||
CY7C1009BN-12VC![]() | Cypress Semiconductor | Standard SRAM, 128KX8, 12ns, CMOS, PDSO32 RoHS : Not Compliant |
| 342 | ||
![]() TME | MBB02070C1001FC100 | Vishay Intertechnologies | Resistor: metal film; THT; 600mW; ±1%; 2.5x6.5mm; -55÷155°C; axial RoHS : Compliant |
| 8,000 | |
| MBE04140C1000FC100 | Vishay Intertechnologies | Resistor: metal film; 100Ω; THT; 1W; ±1%; 500V; Ø4.2x11.9mm; axial RoHS : Compliant |
| 2,755 | ||
| H3CR-A8EAC100240DC100D5 | OMRON Corporation | Timer |
| 11 | ||
| H3CRAAC100240DC100125 | OMRON Corporation | Timer; DPDT; 100÷125VDC; H3CR-A; on panel,socket; -10÷55°C |
| 4 | ||
| MBB02070C1001DC100 | Vishay Intertechnologies | Resistor: metal film; 1kΩ; THT; 600mW; ±0.5%; 350V; Ø2.5x6.5mm RoHS : Compliant |
| 0 | ||
| MBB02070C1009FC100 | Vishay Intertechnologies | Resistor: metal film; 10Ω; THT; 600mW; ±1%; 350V; Ø2.5x6.5mm RoHS : Compliant |
| 0 | ||
| MBE04140C1008FC100 | Vishay Intertechnologies | Resistor: metal film; 1Ω; THT; 1W; ±1%; 500V; 11.9x4.2mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| MBB02070C1008FC100 | Vishay Intertechnologies | Resistor: metal film; 1Ω; THT; 600mW; ±1%; 350V; Ø2.5x6.5mm RoHS : Compliant |
| 0 | ||
| MRS16000C1004FC100 | Vishay Intertechnologies | Resistor: thin film; 1MΩ; THT; 400mW; ±1%; 200V; Ø0.5x29mm; 50ppm/°C RoHS : Compliant |
| 0 | ||
| MBA02040C1004FC100 | Vishay Intertechnologies | Resistor: metal film; 1MΩ; THT; 400mW; ±1%; 0; 200V; Ø0.5x29mm; axial RoHS : Compliant |
| 0 | ||
| MRS25000C1009FC100 | Vishay Intertechnologies | Resistor: thin film; 10Ω; THT; 600mW; ±1%; 350V; Ø0.6x28mm; 50ppm/°C RoHS : Compliant |
| 0 | ||
| MBA02040C1003FC100 | Vishay Intertechnologies | Resistor: metal film; 100kΩ; THT; 400mW; ±1%; 0; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| MBA0204VC1009FC100 | Vishay Intertechnologies | Resistor: metal film; 10Ω; THT; 400mW; ±1%; V; 200V; Ø0.5x29mm; axial RoHS : Compliant |
| 0 | ||
| MRS25000C1008FC100 | Vishay Intertechnologies | Resistor: thin film; 1Ω; THT; 600mW; ±1%; 350V; Ø0.6x28mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| MBA02040C1002DC100 | Vishay Intertechnologies | Resistor: metal film; 10kΩ; THT; 400mW; ±0.5%; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | CL10C100JB8NNND | Samsung Electronics Co. Ltd | CL10 Series 10 pF 50 V ±5 % Tol. C0G SMT Multilayer Ceramic Capacitor | 26,817 | ||
| EEEFN1C100R | Panasonic Electronic Components | RoHS : Compliant | 10,000 | |||
| CL05C100JB5NNNC | Samsung Electronics Co. Ltd | CL05 Series 10 pF 50 V ±5% Tolerance C0G SMT Multilayer Ceramic Capacitor | 5,629 | |||
| EEEFC1C100AR | Panasonic Electronic Components | Capacitor: electrolytic; low impedance; SMD; 10uF; 16VDC; Ø4x5.4mm RoHS : Compliant | 4,000 | |||
| STPSC10065DLF | STMicroelectronics | RoHS : Compliant | 3,080 | |||
| 10TPC100M | Panasonic Electronic Components | TPC Series 100 uF ±20 % 10 V Surface Mount Polymer Solid Tantalum Capacitor RoHS : Compliant | 3,000 | |||
| EEEHB1C100R | Panasonic Electronic Components | Capacitor: electrolytic; SMD; 10uF; 16VDC; Ø4x5.8mm; ±20%; 2000h RoHS : Compliant | 2,000 | |||
| EEEHA1C100AR | Panasonic Electronic Components | RoHS : Compliant | 2,000 | |||
| 16SVPC100M | Panasonic Electronic Components | SVPC Series 16 V 100 uF Ø 6.3 x 5.9 mm Surface Mount Polymer Aluminum Capacitor RoHS : Compliant | 2,000 | |||
MC100LVELT22DTRG![]() | onsemi | Dual LVTTL/LVCMOS to Differential LVPECL Translator RoHS : Compliant | 1,822 | |||
| MC1006VEL14DWR2G | Renesas Electronics Corporation | 1,029 | ||||
MC100EL32DG![]() | onsemi | 5V ECL ÷2 Divider RoHS : Compliant | 590 | |||
| RF4C100BCTCR | ROHM Semiconductor | RoHS : Compliant |
| 580 | ||
MC100EPT23DG![]() | onsemi | MC100EPT23 Series 3.6 V 275 MHz LVPECL/LVDS/CML to LVTTL/LVCMOS Translator RoHS : Compliant | 228 | |||
| EPM3128ATC100-10N | Intel Corporation | MAX®3000A Series 3 to 3.6 V 2500 Gates 128 Macrocells CMOS CPLD - TQFP-100 RoHS : Compliant | 180 | |||
![]() ComSIT USA | MRS25000C1009FC100 | BC COMPONENTS/VISHAY INTERTECHNOLOGY INC | AVAILABLE EU | 4,612 | ||
| EDWTC10008146M50 | EDWARD | AVAILABLE EU | 173 | |||
| CO11MEC100689 | PERANCEA | AVAILABLE EU | 1,032 | |||
| RC1005J330CS | SAMSUNG ELECTRONICS CO LTD | AVAILABLE EU | 18,739 | |||
C1005X7S2A103K050BB![]() | TDK Corporation | AVAILABLE EU RoHS : Compliant | 16,179 | |||
| MEC100774 | AQ HOLMBERGS | AVAILABLE EU | 176 | |||
| EEEHD1C100AR | Panasonic Electronic Components | AVAILABLE EU RoHS : Compliant | 103 | |||
C1005X5R1E103K050BA![]() | TDK Corporation | AVAILABLE EU RoHS : Compliant | 834 | |||
| MEC100758 | AQ ENCLOSURE SYSTEMS AB | AVAILABLE EU | 191 | |||
| MBB02070C5620FC100 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 2,217 | |||
C0402C100K5GACTU![]() | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 105 | |||
| MEC100751 | AQ HOLMBERGS | AVAILABLE EU | 281 | |||
| BZG03C100TR | Vishay Intertechnologies | AVAILABLE EU | 431 | |||
| MEC100741 | AQ ENCLOSURE SYSTEMS AB | AVAILABLE EU | 154 | |||
| EXC100CQF2TR | Exclara Inc | AVAILABLE EU | 1,605 | |||
![]() ComSIT USA | MBA02040C1003FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.25W, 100000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 43,000 | ||
| MBA02040C1001FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.25W, 1000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 41,000 | |||
| MBE04140C1005FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.65W, 10000000ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 28,000 | |||
| MRS16000C1000FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 100ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 12,000 | |||
| MBA02040C1000FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.25W, 100ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 11,000 | |||
| MRS25000C1009FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.6W, 10ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 10,000 | |||
| MRS16000C1003FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 100000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 9,000 | |||
| MBE04140C1004FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.65W, 1000000ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 6,000 | |||
| MBB0207VC1003FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.4W, 100000ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 5,000 | |||
| MRS16000C1002FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 10000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 5,000 | |||
| MRS16000C1001FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 1000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 4,000 | |||
| MBB02070C1000FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.4W, 100ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 4,000 | |||
| MRS25000C1005FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.6W, 10000000ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 3,000 | |||
| MRS16000C1009FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 10ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 2,000 | |||
| MBB0207CC1000FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.6W, 100ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 1,000 | |||
![]() GLYN GmbH & Co. KG | AOFC100-500 | Asahi Chemical Co Ltd | Fibre Optic Cable APF 500m on Reel | 1,000 | ||
| AOFC100ABSCHNITT | Asahi Chemical Co Ltd | Fibre Optic Cable APF | 487 | |||
| ADA-FFC10-050-MLX08-125 | ES+S | LED Backlight Adapter TIANMA P1330FHF1MA00 | 2 | |||
![]() Interstate Connecting Components | H3CR-A8 AC100-240/DC100-125 | OMRON Industrial Automation | H3CR-A8 AC100-240/DC100-125 4 MULT FUNCT TIMER,8PIN |
| 9 | |
| HSC10020RJ | TE Connectivity | HSC100 20R 5% RoHS : Compliant |
| 5 | ||
| H3CR-F8N AC100-240/DC100-125 | OMRON Industrial Automation | H3CR-F8N AC100-240/DC100-125 TIMER,REPEAT CYCLE |
| 1 | ||
| C10-070500-012 | Amphenol Industrial Operations | 8,0MM RECEPTACLE DUST CAP | 0 | |||
| JZC-10046 | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| HA06EC100PC | Amphenol PCD | FIBRE | 0 | |||
| MTC100-BJ1-P23 | TE Connectivity | MTC100-BJ1-P23 RoHS : Compliant | 0 | |||
| GMR7590C-100S1BM | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MSTC100-00-126 | Amphenol Fiber Systems International | SA- AMF | 0 | |||
| MTC100-KT2-0166 | TE Connectivity | RoHS : Not Compliant |
| 0 | ||
| JN1055BC100 | Amphenol PCD | FIBRE | 0 | |||
| 107-197C1000EF-5 | Glenair Inc | GENERAL DUTY GROUND STRAP COPPER / NICKEL PLATED | 0 | |||
| 124C10019X | Conec Corporation | HS-BUCHSE M A4 40A 080 RoHS : Compliant | 0 | |||
| SMI-082MTC100-JA2-P11- | TE Connectivity | SMI-082MTC100-JA2-P11-T13 | 0 | |||
| 164C10029X | Conec Corporation | D-SUB 15P RoHS : Compliant | 0 | |||
![]() NexGen Digital | RC1005J750CS | Samsung Electro-Mechanics | RoHS : Compliant | 20,000 | ||
| MBB0207IC4702FC100 | Vishay Huntington | 20,000 | ||||
| C1005C0G1H100CT000F | TDK Corporation | 10,502 | ||||
C1005X6S1C105K050BC![]() | TDK Corporation | RoHS : Compliant | 10,000 | |||
| C1005X5R0J104KT000F | TDK Corporation | 10,000 | ||||
C1005X7S2A103K050BB![]() | TDK Corporation | RoHS : Compliant | 5,675 | |||
| MRS25000C1004FC100 | Vishay Huntington | 1,935 | ||||
C1005C0G1H221J050BA![]() | TDK Corporation | RoHS : Compliant | 1,488 | |||
C1005X5R0J104K050BA![]() | TDK Corporation | RoHS : Compliant | 716 | |||
| RN55C1002B | Vishay Huntington | 500 | ||||
C1005X5R1A335K050BC![]() | TDK Corporation | RoHS : Compliant | 369 | |||
| MC100EL29DW | Motorola Semiconductor Products | RoHS : Not Compliant | 200 | |||
DSC1001DI1-024.0000T![]() | Microchip Technology Inc | RoHS : Compliant | 13 | |||
| C1005X5R1V225K050BE | TDK Corporation | RoHS : Compliant | 8 | |||
| RLR07C1005GR | Vishay Huntington | 6 | ||||
![]() PEI Genesis | C10-070500-012 | Amphenol Corporation |
| 3,752 | ||
| C10-035899-241 | Amphenol Corporation |
| 0 | |||
| C10-037261-32Y | Amphenol Corporation |
| 0 | |||
| C10-074832-02S | Amphenol Corporation |
| 0 | |||
| 3AC100AA1628AA | SOURIAU-SUNBANK |
| 0 | |||
| C10-037261-14Y | Amphenol Corporation |
| 0 | |||
| MS3437C100N | SOURIAU-SUNBANK |
| 0 | |||
| S3684C1003A3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4108C1007S3.0-34-1 | SOURIAU-SUNBANK |
| 0 | |||
| SE16C1003A3.0ES34 | SOURIAU-SUNBANK |
| 0 | |||
| SE16C1004E3.5R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16C1006F3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| SE1C1006A-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE1C1006E-2.5-4 | SOURIAU-SUNBANK |
| 0 | |||
| SE1C1008F-2.0-4 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | C10-070500-012 | Amphenol Corporation | CONNECTOR |
| 2,476 | |
| 104M06QC100 | Evans Capacitor Company | Filter 100Ohm 0.1uF 600V Radial |
| 250 | ||
| M55302/60-C100Y/25 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M55302/60-C100Y/3 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M55302/60-C100Y/52 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M55302/60LC100Y/20 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M55302/60LC100Y/57 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M55302/60LC100Y/8 | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| M5530260C100Y | AirBorn a molex company | Military Rectangular PCB Connector |
| 101 | ||
| ARINC-100.18 | Quell Corporation | EESEAL |
| 50 | ||
| M55302/59C100Y-28 | AirBorn a molex company | Military Rectangular PCB Connector |
| 40 | ||
| M55302/59C100Y-55 | AirBorn a molex company | Military Rectangular PCB Connector |
| 40 | ||
| MS3437C100N | Glenair Inc | ACCESSORIES - RFI/EMI NON-ENV ADAPTER |
| 17 | ||
| 19C100PG7K | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 11 | ||
| MTC100-JA2-P11M3-CS082 | TE Connectivity | Connectors RoHS : Not Compliant |
| 4 | ||
![]() PUI | MSC-100MA | 2,493 | ||||
| FSC-100MA | 1,773 | |||||
| KBPC1008-G | 150 | |||||
| FSC-100MA-BX | 20 | |||||
![]() Braemac Americas-Symmetry | AISC-1008-R015K-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-1008-R068M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R82M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAHC-100.0000MHZ-LJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-3R3G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008HQ-56NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAC-100.0000MHZ-VR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAHC-100.0000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAHC-100.0000MHZ-XR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-1R5M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-2R7J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-3R9G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R33M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R62K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | TM3S8-C100 | Panduit Corp | Cable Tie Mount, .62 #8 Scre (15.8mm)W, |
| 600 | |
| TM2S8-C100 | Panduit Corp | CABLE TIE MOUNT, .43 #8 SCRE (10.9MM)W, RoHS : Compliant |
| 268 | ||
| 375C100-18-02 | Tech-Etch | CLIP-ON, STRIP STRP, 18, C&B | 165 | |||
| KN4C1000F2---21 | Essentra Components | CLAMPING FLUTED KNOB 1.375 IN | 0 | |||
| SC100015B | Essentra Components | ROUND END CAPEPDM BLACK | 0 | |||
| SDS-C100-W | Sugatsune Kogyo Co Ltd | SOFT-DOWN STAY | 0 | |||
| WHC-1000-01BK | Essentra Components | CLIP,SCREW MNT,BLACK,1 IN HOLD | 0 | |||
| DC-100 | Sugatsune Kogyo Co Ltd | DAMPER CATCH | 0 | |||
| BHC-10-01 | Essentra Components | CB SptBlnd Hl MntNat5/8 in Spc Spc CB Spt Blnd Hole Mnt Natural | 0 | |||
| T4184-5C100 | HeliCoil | 0 | ||||
| KN6C10003P4--2R | Essentra Components | CLAMPING 3 ARM KNOB 1.750 IN D | 0 | |||
| EC-100/S | Sugatsune Kogyo Co Ltd | 0 | ||||
| SC100015A | Essentra Components | ROUND END CAPSILICON NATURAL | 0 | |||
| KN4C10005S2--21 | Essentra Components | CLAMPING STAR KNOB 1.380 IN DI | 0 | |||
| KN4C1000T5---21 | Essentra Components | CLAMPING T HANDLE KNOB 2.000 I | 0 | |||
![]() ECCO | AC100000601BP | Amphenol Communications Solutions | 5 | |||
![]() Flip Electronics | MC100EPT22DG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 96,217 | ||
CY7C1361C-100AXE![]() | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 16,853 | |||
MC100EP35DG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 13,720 | |||
MC100EP16VADTG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 11,100 | |||
MC100EP196BFAR2G![]() | onsemi | Stock RoHS : Compliant | 4,567 | |||
MC100LVEL56DWR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 3,470 | |||
MC100LVEL91DWR2![]() | onsemi | Stock RoHS : Not Compliant | 3,000 | |||
MC100LVELT23DTG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 2,700 | |||
MC100EP14DTR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 2,500 | |||
MC100EP196FAR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 2,000 | |||
| MICROFC-10035-SMT-TR1 | onsemi | Stock, Ship Today RoHS : Compliant | 800 | |||
MC100ELT21DG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 588 | |||
EPM7064STC100-10F![]() | Altera Corporation | Stock RoHS : Not Compliant | 347 | |||
| CY7C1361C-100BZXE | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 272 | |||
MC100EP51DTG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 100 | |||
![]() Pasternack Enterprises US | PE3C100070-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 12 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100070-12 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-12 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-12 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-12 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-12 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 29 | |
| PE3C100065-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Female to 2.4mm Female Low Loss Test Cable 36 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100065-36 low loss test 2.4mm female to 2.4mm female RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm female to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100065-36 can also be known as a low loss test 2.4mm jack to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100065-36 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm female to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100065-36 2.4mm jack to 2.4mm jack cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm jack to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 17 | ||
| PE3C100068-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Female to 2.92mm Female Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100068-24 low loss test 2.92mm female to 2.92mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100068-24 can also be known as a low loss test 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100068-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm female to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100068-24 2.92mm jack to 2.92mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.92mm jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements. |
| 17 | ||
| PE3C100087-10CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Male Cable Assembly Using O.D. 1.13mm Cable, length = 100mm., Pasternack’s PE3C100087-10CM MHF1 to SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA cable connection on the other. PE3C100087-10CM can also be known as an MHF1 to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.052-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.157 inches, allowing for a single bend without damaging the cable. Our PE3C100087-10CM RF cable has an FEP jacket of 0.052-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to SMA male cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100087-10CM can also be used in the other direction and will be an SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements. |
| 10 | ||
| PE3C100021-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable 12 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable 12 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable 12 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021-12 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021-12 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10005/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using PE-C200 Coax with HeatShrink. PE3C10005/HS is a N female bulkhead to TNC male cable using PE-C200 coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10005/HS N female bulkhead to TNC male cable assembly is constructed with PE-C200 coax. | 0 | |||
| PE3C10076 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to TNC Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10076 can also be known as a 3.5mm plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC plug cable assembly PE3C10076 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10076 can also be used in the other direction and will be TNC male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3C10085-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Female Bulkhead to TNC Female Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10085-12 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10085-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10085-12 can also be used in the other direction and will be TNC female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10098-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female Bulkhead to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a type N bulkhead cable connection on the other. Our a 3.5mm to a type N cable assembly has female gender on end 1 and female on end 2. PE3C10098-18 can also be known as a 3.5mm jack to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N jack cable assembly PE3C10098-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10098-18 can also be used in the other direction and will be type N female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100012-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Female Bulkhead Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss space SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C100012-100CM can also be known as a low loss space SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.437-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100012-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C100012-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100012-100CM can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss space RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10021 | Pasternack Enterprises | 0 | ||||
| PE3C10058 | Pasternack Enterprises | 0 | ||||
| PE3C10096-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to N Male Right Angle Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to N male right angle cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to N male right angle cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has female gender on end 1 and male on end 2. PE3C10096-9 can also be known as a 3.5mm jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10096-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10096-9 can also be used in the other direction and will be right angle type N male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3TC1000D-24 | Pasternack Enterprises | 0 | ||||
| PE3C10001/HS | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | HSC1003R3J | TE Connectivity | HSC100 3R3 5% Resistance Value: 3.3 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 3.3 Ω Wire Wound 5 % Power Resistor | Part Number: HSC1003R3J | Internal Number: 3-1625999-3 | TE Connectivity RoHS : Compliant |
| 328 | |
| HSC10020RJ | TE Connectivity | HSC100 20R 5% Resistance Value: 20 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 20 Ω Wire Wound 5 % Power Resistor | Part Number: HSC10020RJ | Internal Number: 1-1625999-7 | TE Connectivity RoHS : Compliant |
| 119 | ||
| HSC100R50J | TE Connectivity | HSC100 R50 5% Resistance Value: .5 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.5 Ω Wire Wound 5 % Power Resistor | Chassis Mount Resistor | Part Number: HSC100R50J | Internal Number: 5-1625999-4 | TE Connectivity RoHS : Compliant |
| 66 | ||
| HSC100R82J | TE Connectivity | HSC100 R82 5% Resistance Value: .82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.82 Ω Wire Wound 5 % Power Resistor | Chassis Mount Resistor | Part Number: HSC100R82J | Internal Number: 6-1625999-1 | TE Connectivity RoHS : Compliant |
| 57 | ||
| HSC1001R5J | TE Connectivity | HSC100 1R5 5% Resistance Value: 1.5 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 1.5 Ω Wire Wound 5 % Power Resistor | Part Number: HSC1001R5J | Internal Number: 1-1625999-5 | TE Connectivity RoHS : Compliant |
| 37 | ||
| HSC1003K9J | TE Connectivity | HSC100 3K9 5% Resistance Value: 3.9K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 3.9K Ω Wire Wound 5 % Power Resistor | Part Number: HSC1003K9J | Internal Number: 5-1625999-7 | TE Connectivity RoHS : Compliant |
| 18 | ||
| HSC100S3K3J | TE Connectivity | HSC100S 3K3 5% Screw Terminal Resistance Value: 3.3K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 3.3K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S3K3J | Internal Number: 5-2176731-8 | TE Connectivity RoHS : Compliant |
| 16 | ||
| HSC100S470RJ | TE Connectivity | HSC100S 470R 5% Screw Terminal Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 470 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S470RJ | Internal Number: 4-2176731-8 | TE Connectivity RoHS : Compliant |
| 13 | ||
| HSC100S6K8J | TE Connectivity | HSC100S 6K8 5% Screw Terminal Resistance Value: 6.8K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 6.8K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S6K8J | Internal Number: 6-2176731-2 | TE Connectivity RoHS : Compliant |
| 10 | ||
| HSC100S22KJ | TE Connectivity | HSC100S 22K 5% Screw Terminal Resistance Value: 22K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 22K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S22KJ | Internal Number: 6-2176731-8 | TE Connectivity RoHS : Compliant |
| 8 | ||
| HSC100S2K2J | TE Connectivity | HSC100S 2K2 5% Screw Terminal Resistance Value: 2.2K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 2.2K Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S2K2J | Internal Number: 5-2176731-6 | TE Connectivity RoHS : Compliant |
| 6 | ||
| HSC100S680RJ | TE Connectivity | HSC100S 680R 5% Screw Terminal Resistance Value: 680 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 680 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S680RJ | Internal Number: 5-2176731-0 | TE Connectivity RoHS : Compliant |
| 5 | ||
| HSC100S82RJ | TE Connectivity | HSC100S 82R 5% Screw Terminal Resistance Value: 82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 82 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S82RJ | Internal Number: 3-2176731-9 | TE Connectivity RoHS : Compliant |
| 5 | ||
| HSC100S27RJ | TE Connectivity | HSC100S 27R 5% Screw Terminal Resistance Value: 27 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 27 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S27RJ | Internal Number: 3-2176731-3 | TE Connectivity RoHS : Compliant |
| 3 | ||
| HSC100S100RJ | TE Connectivity | HSC100S 100R 5% Screw Terminal Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 100 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S100RJ | Internal Number: 4-2176731-0 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Venkel Ltd. | MELFC0102-UC-1000DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;100R;�0.5% RoHS : Compliant | 0 | ||
| MELFC0204-ZC-1003CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;100K;�0.25% RoHS : Compliant | 0 | |||
| MELFM0204-TC-1002BT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;10K;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-1003BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;100K ;�0.1% RoHS : Not Compliant | 0 | |||
| HPTF0603-QC-1002AT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�50PPM;10K;�0.05% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1004BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;1M;�0.1% RoHS : Compliant | 0 | |||
| HPTF2512-WC-1001CT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�50PPM;1K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-RC-1003FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;100K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-1003FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;100K;�1% RoHS : Compliant | 0 | |||
| MELFM0204-TC-1000DT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;100R;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-1000BT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;100R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-1001DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;1K;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0207-XC-1002CT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;10K;�0.25% RoHS : Not Compliant | 0 | |||
| HPTF0603-SC-1001BT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;1K;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1002DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;10K;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | MRS16000C1009FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 10ohm, 200V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 18,182 | ||
| MBB0207CC1003FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.6W, 100000ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 15,621 | |||
| MBB02070C1003FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.4W, 100000ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 13,567 | |||
| H3CR-AAC100-240/DC100-125 | OMRON Corporation | Solid State Module RoHS : Compliant | 13,128 | |||
MC100EP31DTR2G![]() | onsemi | D Flip-Flop, 100E Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, ECL, PDSO8 RoHS : Compliant | 12,637 | |||
| H3CR-A8EAC100-240/DC100-125 | ROHM Semiconductor | Solid State Module | 11,170 | |||
MC100EP01D![]() | onsemi | OR/NOR Gate, 100E Series, 1-Func, 4-Input, ECL, PDSO8 RoHS : Not Compliant | 10,972 | |||
| H3CR-F8AC100-240/DC100-125 | OMRON Corporation | Solid State Module | 9,132 | |||
| LY2N-DC100/110 | OMRON Corporation | Power/Signal Relay, DPDT, Momentary, 0.01A (Coil), 110VDC (Coil), 900mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Panel Mount RoHS : Compliant | 7,060 | |||
| H3CR-A8AC100-240/DC100-125 | OMRON Corporation | Solid State Module RoHS : Compliant | 5,503 | |||
MC100EP446FAR2![]() | onsemi | Parallel In Serial Out, 100E Series, 8-Bit, Right Direction, Complementary Output, ECL, PQFP32 RoHS : Not Compliant | 5,237 | |||
MC100EPT26MNR4![]() | onsemi | PECL to TTL Translator, 1 Func, True Output, ECL, PDSO8 RoHS : Not Compliant | 4,855 | |||
MC100EP196FA![]() | onsemi | Active Delay Line, Programmable, 1-Func, 1023-Tap, Complementary Output, ECL, PQFP32 RoHS : Not Compliant | 4,532 | |||
MC100EL1648MEL![]() | onsemi | Analog Circuit, 1 Func, BIPolar, PDSO14 RoHS : Compliant | 4,264 | |||
| C100 | TE Connectivity | 117.2mm2 | 497 | |||
![]() Waytek, Inc. | FHJC1002G | Littelfuse Inc | In-Line 60A JCase Fuse Holder 8 GA Red GXL 125C With Cover -40C TO 125C 46099 RoHS : Compliant |
| 59 | |
| LM-2C-100R/WLAT | NASON | Low Pressure Switch UL CSA 100 PSI SPDT Rising 18" UL3173 10A@125/250 250 VAC 5A@30VDC |
| 12 | ||
![]() Win Source Electronics | C1005X5R1C105KT000E | TDK Corporation | RoHS : Compliant |
| 290,000 | |
| MMA02040C1001FB300 | Vishay Huntington | RES SMD 1K OHM 1% 0.4W 0204 |
| 168,000 | ||
| 25TQC100MD3 | Panasonic Electronic Components | CAP TANT POLY 100UF 25V 2917 / 100 µF Molded Tantalum Polymer Capacitor 25 V 2917 (7343 Metric) 60mOhm @ 100kHz RoHS : Compliant |
| 100,000 | ||
| C1005X7R1H104KT000F | TDK Corporation | 100nF ±10% 50V Ceramic Capacitor X7R 0402 RoHS : Compliant |
| 90,000 | ||
| C1005X7R1H102KT000F | TDK Corporation | RoHS : Compliant |
| 50,000 | ||
| CPC1008NTR | IXYS Integrated Circuits Division | RELAY OPTOMOS SP-NO 150MA 4-SOP RoHS : Compliant |
| 46,210 | ||
| BSC100N06LS3G | Infineon Technologies AG | OptiMOS3 Power-Transistor / Trans MOSFET N-CH 60V 12A 8-Pin TDSON EP T/R RoHS : Compliant |
| 35,000 | ||
| IAUC100N04S6N022 | Infineon Technologies AG | MOSFET_(20V 40V) |
| 30,000 | ||
MC100LVE210FNR2G![]() | onsemi | IC CLK BUF 1:4/1:5 700GHZ 28PLCC RoHS : Compliant |
| 27,790 | ||
MC100EL35DR2G![]() | onsemi | IC JK TYPE POS TRG SNGL 8SOIC RoHS : Compliant |
| 16,540 | ||
MC100EPT23DR2G![]() | onsemi | Translator CML/LVDS/LVPECL to LVCMOS/LVTTL 2-CH Unidirectional 8-Pin SOIC N T/R / IC XLATOR LV PECL-TTL DL 8-SOIC RoHS : Compliant |
| 11,895 | ||
| PN7160A1HN/C100Y | Nexperia | IC NFC CONTROLLER I2C HVQFN40 |
| 9,160 | ||
| 6TPC100M | Panasonic Electronic Components | Polymer Tantalum Capacitors 100UF 6.3V 2917 RoHS : Compliant |
| 6,000 | ||
MC100LVEL16DR2![]() | onsemi | IC RECEIVER ECL DIFF 3.3V 8-SOIC RoHS : Not Compliant |
| 4,580 | ||
EPM7128ATC100-10![]() | Altera Corporation | CPLD MAX 7000A Family 2.5K Gates 128 Macro Cells 87MHz 3.3V 100-Pin TQFP / High-performance 3.3-V EEPROM-based programmable logic devices (PLDs) built on second-generation Multiple Array MatriX RoHS : Not Compliant |
| 2,233 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |