C17G-S14-R Price, Distributor, Stock

BlueKote Thru-Feed Form 7 - 1/2 Inch Conduit Body - Body Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating.
RoHS : Compliant

500 : $19.97
250 : $20.24
100 : $20.79
50 : $21.69
25 : $22.66
10 : $23.35
5 : $24.48

BC-17-8-DKL-S-TRANS

Phoenix Contact

Installation component housing - Transparent hinged cover - Including insertion plate - width: 17.8 mm - height: 45 mm - color: transparent/light gray (7035)
RoHS : Compliant

10 : $3.37
1 : $3.55

BC-17-8-UT-HBUS-BK

Phoenix Contact

DIN rail housing for use in distribution boards in accordance with DIN 43880 - Lower housing part with base latch - width: 17.8 mm - height: 89.7 mm - depth: 20.3 mm - cross connection: DIN rail connector (optional) - number of positions cross connector: 16 - color: black (9005)
RoHS : Compliant

10 : $6.11
1 : $6.43

LA3F-2C17V-R

IDEC Corporation

Switch Selector N.O./N.C. DPDT 90° Knob 0.1A 125VAC 30VDC PC Pins 250000Cycles Panel Mount/Through Hole
RoHS : Compliant

500 : $21.16
250 : $21.48
100 : $22.09
50 : $23.07
25 : $24.14
10 : $24.91
1 : $28.01

LC170A/TR

Microchip Technology Inc

Uni-Directional TVS
RoHS : Compliant

100 : $36.07
75 : $36.81
50 : $52.31
25 : $98.8

LC17A/TR

Microchip Technology Inc

Uni-Directional TVS
RoHS : Compliant

100 : $36.07
75 : $36.81
50 : $52.31
25 : $98.8

VA5AL10B-AKC17-000

Carling Technologies

V-SERIES ROCKER SWITCH
RoHS : Compliant

100 : $12.07
75 : $12.32
50 : $13.2
25 : $17.6

VDN2S00B-CZC17-000

Carling Technologies

RoHS : Compliant

250 : $17.23
100 : $21.82
50 : $30.55
30 : $32.32
10 : $34.22
5 : $34.31
1 : $38.45

901-92-AC-1-7-93-PN-090

TE Connectivity

901-92 AC 1-7-93 PN 090 MOQ Reduction
RoHS : Compliant

200 : $1,226.53
150 : $1,251.56
100 : $1,838.63
50 : $3,599.84

BTH3C-17-11-1-C

TE Connectivity

BTH3C-17-11-1-C MOQ Reduction
RoHS : Compliant

50 : $881.02
38 : $899.0
25 : $1,338.3
13 : $2,519.48

DBMC-17C2P-J-K87

ITT Interconnect Solutions

Conn D-Subminiature PIN 2Coaxial/15Signal POS Solder RA Thru-Hole 21 Terminal 1 Port
RoHS : Compliant

168 : $77.43
126 : $79.01
84 : $116.07
42 : $227.25

DBMC-17H2P-J-K127

ITT Interconnect Solutions

Conn D-Sub M 2Power/15Signal POS Solder RA Thru-Hole 17 Terminal 1 Port
RoHS : Compliant

168 : $56.33
126 : $57.48
84 : $83.58
42 : $158.36

C1700/40TB-100

3M Interconnect

RoHS : Compliant

45 : $200.59
34 : $204.68
23 : $293.31
12 : $532.59

Pasternack Enterprises US

PE3C1709LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated SMA Male Right Angle to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-195-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated SMA male right angle to TNC female bulkhead low loss cable 48 inch length using LMR-195-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male right angle to TNC female bulkhead low loss cable 48 inch length using LMR-195-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C1709LF/HS-48 can also be known as a low loss right angle SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1709LF/HS-48 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Our right angle SMA male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3C1709LF/HS-48 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1709LF/HS-48 can also be used in the other direction and will be a TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

1,901

PE3C1737-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1737-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1737-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.3:1. Type N plug to type N plug cable assembly PE3C1737-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $105.99
10 : $103.87
25 : $101.75
100 : $99.63

709

PE3C1732/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1732/HS-36 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1732/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

507

PE3C1737-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1737-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1737-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.3:1. Type N plug to type N plug cable assembly PE3C1737-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $106.99
10 : $104.85
25 : $102.71
100 : $100.57

141

PE3C1722-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 59.055 inches. SMA Male to SMA Male Right Angle Low Loss Test Cable 150 cm Length Using PE-P300LL Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle low loss test cable 150 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle low loss test cable 150 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss test SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1722-150CM, can also be known as a low loss test SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1722-150CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1722-150CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss test SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss test cable 150 cm length using PE-P300LL coax, RoHS.

1 : $477.99
25 : $454.09
50 : $430.19

PE3C1754-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-200-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1754-300 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1754-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C1754-300 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $164.99
10 : $161.69
25 : $158.39
100 : $155.09

PE3C1701

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using RG405 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C1701 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The semi-rigid RF cable has an in-series connection. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. 2.4mm plug to 2.4mm plug cable assembly PE3C1701 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm RF cable assembly as per your requirements.

PE3C1738

Pasternack Enterprises

PE3C1761/HS/PH270

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Right Angle Cable Using LMR-200 Coax with HeatShrink and 270 Deg. Clock. PE3C1761/HS/PH270 is a N male right angle to SMA male right angle cable using LMR-200 coax. This Pasternack N male right angle to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1761/HS/PH270 N male right angle to SMA male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1783

Pasternack Enterprises

PE3C1704LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-400-UF Coax, LF Solder. PE3C1704LF is a TNC male to SMA male cable using LMR-400-UF coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1704LF TNC male to SMA male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1720

Pasternack Enterprises

PE3C1737/HS2

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-240-UF Coax with Double HeatShrink., Radio frequency assembly N male to N male cable using LMR-240-UF coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable using LMR-240-UF coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C1737/HS2, can also be known as a N type plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1737/HS2 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable using LMR-240-UF coax with double heatshrink.

PE3C1751/HS

Pasternack Enterprises

PE3C1757

Pasternack Enterprises

Venkel Ltd.

HPTF0603-SC-1740DT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;174R;�0.5%
RoHS : Compliant

HPTF0805-RC-1780AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�50PPM;178R;�0.05%
RoHS : Compliant

HPTF0805-TC-1741BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;1.74K;�0.1%
RoHS : Compliant

HPTF1206-TC-1782AT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;17.8K;�0.05%
RoHS : Compliant

HPTF1206-UC-17R8BT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;17.8R;�0.1%
RoHS : Compliant

HPTF1210-UC-1741FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;1.74K;�1%
RoHS : Compliant

HPTF2010-UC-1742FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;17.4K;�1%
RoHS : Compliant

HPTF2512-WC-1780AT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�50PPM;178R;�0.05%
RoHS : Compliant

HPTF2512-XC-17R4FT

VENKEL LTD

High Power Thin Film CR;2512;1W;�50PPM;17.4R;�1%
RoHS : Compliant

TFCR0402-16W-C-1740BT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;174R;�0.1%
RoHS : Compliant

TFCR0402-16W-C-1761BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;1.76K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-1721CT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;1.72K;�0.25%
RoHS : Compliant

TFCR0603-10W-C-1762DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;17.6K;�0.5%
RoHS : Compliant

TFCR0603-10W-C-1763BT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;176K ;�0.1%
RoHS : Compliant

TFCR0603-10W-C-17R4BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;17.4R;�0.1%
RoHS : Compliant

Win Source Electronics

LTST-C170KGKT

Lite-On Semiconductor Corporation

Meet ROHS, Green Product.
RoHS : Compliant

31,915 : $0.0094
25,775 : $0.0097
19,805 : $0.0101
13,765 : $0.0109
8,850 : $0.0113
4,170 : $0.012

990,000

SN74HC175DRG4

Texas Instruments

QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

29,660

ALS-PDIC17-77C/TR8

Everlight Electronics Co Ltd

RoHS : Compliant

1,145 : $0.2628
855 : $0.2931
660 : $0.3032
480 : $0.3133
310 : $0.3234
130 : $0.3942

20,000

LTC1772ES6

Linear Technology

Constant Frequency Current Mode Step-Down DC/DC Controller in SOT-23
RoHS : Not Compliant

60 : $6.5591
48 : $6.8324
37 : $7.1056
26 : $7.6523
17 : $7.9256
8 : $8.472

15,000

LPC1769FBD100/P1K

Nexperia

LPC17xx - 512kB flash, 64kB SRAM / ARM® Cortex®-M3 LPC17xx Microcontroller IC 32-Bit 120MHz 512KB (512K x 8) FLASH 100-LQFP (14x14)

14 : $22.7297
10 : $25.3523
8 : $26.2265
6 : $27.1007
4 : $27.975
2 : $34.0945

12,740

SN65LBC179QDG4

Texas Instruments

IC TRANSCEIVER FULL 1/1 8SOIC / 1/1 Transceiver Full RS422, RS485 8-SOIC
RoHS : Compliant

57 : $5.9471
46 : $6.1889
35 : $6.4306
25 : $6.9141
16 : $7.1559
8 : $7.6393

12,500

SN65LBC179ADG4

Texas Instruments

IC TRANSCEIVER FULL 1/1 8SOIC / 1/1 Transceiver Full RS422, RS485 8-SOIC
RoHS : Compliant

240 : $1.4013
180 : $1.563
140 : $1.6168
105 : $1.6708
65 : $1.7247
30 : $2.1019

11,964

SN75LBC176ADG4

Texas Instruments

IC DIFF BUS TXRX 8-SOIC
RoHS : Compliant

65 : $4.6241
52 : $4.8121
40 : $5.0
28 : $5.376
18 : $5.564
9 : $5.9399

8,890

LPC1754FBD80

Nexperia

32-bit ARM Cortex-M3 microcontroller; / MCU 32-bit ARM Cortex M3 RISC 128KB Flash 2.5V/3.3V 80-Pin LQFP

53 : $5.7339
42 : $5.967
33 : $6.2
23 : $6.6662
15 : $6.8993
7 : $7.3655

6,380

LTC1728ES5-2.5

Linear Technology

Micropower Precision Triple Supply Monitors in 8-Lead MSOP and 5-Lead SOT-23 Packages
RoHS : Not Compliant

86 : $3.9117
65 : $4.3631
50 : $4.5135
37 : $4.6639
24 : $4.8144
10 : $5.8676

4,566

LPC1788FET208

Nexperia

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG

14 : $21.6667
11 : $24.1667
8 : $25.0
6 : $25.8334
4 : $26.6667
2 : $32.5001

1,854

LTC1735IS#TRPBF

Linear Technology

IC REG CTRLR BUCK 16SOIC
RoHS : Compliant

27 : $12.8471
20 : $14.3294
16 : $14.8235
11 : $15.3177
8 : $15.8117
3 : $19.2705

590

XCZU11EG-L2FFVC1760E

AMD

IC SOC CORTEX-A53 1760FCBGA / Quad ARM® Cortex®-A53 MPCore™ with CoreSight™, Dual ARM®Cortex™-R5 with CoreSight™, ARM Mali™-400 MP2 System On Chip (SOC) IC series Zynq®UltraScale+™ FPGA, 653K+ Logic Cells 533MHz, 600MHz, 1.3GHz 1760-FCBGA (42.5x42.5)
RoHS : Compliant

1 : $828.9972
1 : $828.9972
1 : $828.9972
1 : $828.9972
1 : $828.9972
1 : $828.9972

500

SN65LBC170DBRG4

Texas Instruments

TRIPLE DIFFERENTIAL TRANSCEIVERS
RoHS : Compliant

16 : $19.697
12 : $21.9697
9 : $22.7273
7 : $23.4849
5 : $24.2425
2 : $29.5455

277

LTC1760IFW#TRPBF

Analog Devices Inc

IC BATT CHG SMART 2CEL 48TSSOP
RoHS : Compliant

8 : $38.2457
6 : $42.6586
5 : $44.1296
4 : $45.6006
3 : $47.0716
1 : $57.3685

120

C17G-S14-R Distributor

Link URL