 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C9900-R258 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 NexGen Digital | IMIC9915AY | Cypress Semiconductor | RoHS : Not Compliant | 121 | ||
HMC992LP5E | Hittite Microwave Corp | RoHS : Compliant | 7 | |||
 Chip 1 Exchange | C99830-000 | INSTOCK | 501,540 | |||
| LC99115L-S | SANYO Semiconductor Co Ltd | INSTOCK | 3,295 | |||
| CPC9909NE | INSTOCK | 1,955 | ||||
| MC990001A09 | INSTOCK | 1 | ||||
 Avnet Silica | LC99TIAMD | Quectel Wireless Solutions Co Ltd | (Alt: LC99TIAMD) RoHS : Compliant | 0 | ||
| STWLC99JR | STMicroelectronics | QiCompliant Inductive Wireless Power Receiver 121Pin WLCSP TR (Alt: STWLC99JR) RoHS : Compliant | 0 | |||
| GC99670-00 | Microchip Technology Inc | SchottkySurface Mount Limiting Diode DriverSchottkySurface Mount Limiting Diode Driver (Alt: GC99670-00) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | 33-HC990EXF-35-00-0190 | Calian |
| 0 | ||
| 33-HC997EXF-35-00-1500 | Calian | HC997EXF Extended-Filter Embedded Triple-band GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| HC990EXF-35-05-0361 | Calian | Embedded, Full GNSS Spectrum + L-band with eXtended Filtering, 35dB active gain, MCX R/A Male/Plug, 361mm cable length |
| 0 | ||
| 33-HC990EXF-28-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| 33-HC990EXF-35-00-0150 | Calian | Internal p/n 110-0342-A |
| 0 | ||
| 33-HC990EXF-35-05-0361 | Calian |
| 0 | |||
| 33-HC990XF-28 | Calian | HC990XF Extended-Filter Full-Band GNSS Low-Profile Helical Antenna + L-Band, 28dB |
| 0 | ||
| 33-HC990EXF-35-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | ||
| 33-HC997EXF-28-00-1500 | Calian | HC997EXF Extended-Filter Embedded Triple-band GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | ||
 EBV Elektronik | IGC99T120T8RLX1SA3 | Infineon Technologies AG | IGBT CHIPS (Alt: SP000945514) RoHS : Compliant | 0 | ||
| IGC99T120T8RHX1SA1 | Infineon Technologies AG | TRENCHSTOPTM IGBT4 High Power Chip (Alt: SP000945508) RoHS : Compliant | 0 | |||
| IGC99T120T8RMX1SA1 | Infineon Technologies AG | (Alt: SP000945524) RoHS : Compliant | 0 | |||
| IGC99T120T8RQX1SA1 | Infineon Technologies AG | IGBT CHIPS (Alt: SP000945530) RoHS : Compliant | 0 | |||
 Pasternack Enterprises US | PE3C9905-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 24 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 24 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-24 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-24 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,162 | |
| PE3C9932-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum 2.2-5 Male to 4.3-10 Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to 4.3-10 male low PIM cable 60 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to 4.3-10 male low PIM cable 60 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C9932-60 can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9932-60 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 4.3-10 plug cable assembly PE3C9932-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9932-60 can also be used in the other direction and will be a 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 175 | ||
| PE3C9966 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMPS Female Right Angle to SMP Female Cable Using PE-P047HF Coax., Radio frequency assembly SMPS female right angle to SMP female cable using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female right angle to SMP female cable using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMPS cable connection on one end and SMP cable connection on the other. Our right angle SMPS to SMP cable assembly has female gender on end 1 and female on end 2. PE3C9966 can also be known as a right angle SMPS jack to SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to SMP jack cable assembly PE3C9966 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with right angle SMPS to SMP cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 18 GHz maximum frequency SMPS right angle female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9966 can also be used in the other direction and will be SMP female to right angle SMPS female cable assembly if the opposite connectivity is required. SMPS right angle jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMP cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female right angle to SMP female cable using PE-P047HF coax. | 131 | |||
| PE3C9965-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMPS Female Right Angle to Mini SMP Female Cable 6 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female right angle to mini SMP female cable 6 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female right angle to mini SMP female cable 6 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMPS cable connection on one end and mini SMP cable connection on the other. Our right angle SMPS to mini SMP cable assembly has female gender on end 1 and female on end 2. PE3C9965-6 can also be known as a right angle SMPS jack to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to mini SMP jack cable assembly PE3C9965-6 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with right angle SMPS to mini SMP cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS right angle female to mini SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9965-6 can also be used in the other direction and will be mini SMP female to right angle SMPS female cable assembly if the opposite connectivity is required. SMPS right angle jack to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to mini SMP cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female right angle to mini SMP female cable 6 inch length using PE-P047HF coax. |
| 70 | ||
| PE3C9962 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMPS Female Right Angle to 2.92mm Female Cable Using PE-P047HF Coax., Radio frequency assembly SMPS female right angle to 2.92mm female cable using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female right angle to 2.92mm female cable using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 2.92mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMPS cable connection on one end and 2.92mm cable connection on the other. Our right angle SMPS to 2.92mm cable assembly has female gender on end 1 and female on end 2. PE3C9962 can also be known as a right angle SMPS jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 2.92mm jack cable assembly PE3C9962 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with right angle SMPS to 2.92mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has clamp/solder attachment method and passivated stainless steel body with plating. RF specs on this 40 GHz maximum frequency SMPS right angle female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9962 can also be used in the other direction and will be 2.92mm female to right angle SMPS female cable assembly if the opposite connectivity is required. SMPS right angle jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.92mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female right angle to 2.92mm female cable using PE-P047HF coax. | 58 | |||
| PE3C9957-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPS Female to 1.85mm Female Cable 18 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to 1.85mm female cable 18 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 1.85mm female cable 18 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 1.85mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and 1.85mm cable connection on the other. Our SMPS to 1.85mm cable assembly has female gender on end 1 and female on end 2. PE3C9957-18 can also be known as a SMPS jack to 1.85mm jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 1.85mm jack cable assembly PE3C9957-18 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has clamp/solder attachment method and passivated stainless steel body with plating. RF specs on this 40 GHz maximum frequency SMPS female to 1.85mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9957-18 can also be used in the other direction and will be 1.85mm female to SMPS female cable assembly if the opposite connectivity is required. SMPS jack to 1.85mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 1.85mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to 1.85mm female cable 18 inch length using PE-P047HF coax. |
| 1 | ||
| PE3C9902 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable Using TFT-5G-402 Coax. PE3C9902 is a 2.2-5 male to 7/16 DIN female 4 hole flange cable using TFT-5G-402 coax. This Pasternack 2.2-5 male to 7/16 DIN female 4 hole flange cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 2.2-5 to female 7/16 DIN 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C9902 2.2-5 male to 7/16 DIN female 4 hole flange cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C9939 | Pasternack Enterprises | 0 | ||||
| PE3C9946/HS | Pasternack Enterprises | 0 | ||||
| PE3C9984 | Pasternack Enterprises | 0 | ||||
| PE3C9973/HS | Pasternack Enterprises | 0 | ||||
| PE3C9917 | Pasternack Enterprises | 0 | ||||
| PE3C9953-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPS Female to 2.4mm Male Cable 18 Inch Length Using PE-P047HF Coax., Radio frequency assembly SMPS female to 2.4mm male cable 18 inch length using PE-P047HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to 2.4mm male cable 18 inch length using PE-P047HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMPS to 2.4mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMPS cable connection on one end and 2.4mm cable connection on the other. Our SMPS to 2.4mm cable assembly has female gender on end 1 and male on end 2. PE3C9953-18 can also be known as a SMPS jack to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. These cable assemblies are suitable for scientific research, high-reliability, high-density for aerospace & defense application, ground base station &communication systems, avionics and radar systems where RF signal integrity is critical. This cable assembly employs durable and flexible materials, and with a 0.100 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMPS jack to 2.4mm plug cable assembly PE3C9953-18 is built with PE-P047HF which is a flexible coax type. The Pasternack flexible SMPS cable assembly is manufactured with SMPS to 2.4mm cable connectors, has a 50 Ohm impedance and is double shielded. This blue RF cable assembly features an FEP jacket with 0.06 inches diameter. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. RF specs on this 40 GHz maximum frequency SMPS female to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9953-18 can also be used in the other direction and will be 2.4mm male to SMPS female cable assembly if the opposite connectivity is required. SMPS jack to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMPS to 2.4mm cable assembly for quick shipment worldwide. Variations of SMPS cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMPS female to 2.4mm male cable 18 inch length using PE-P047HF coax. |
| 0 | ||
| PE3C9999 | Pasternack Enterprises | 0 | ||||
| PE3C9900 | Pasternack Enterprises | 0 | ||||
 Vyrian | EVAL01-HMC993LP5E | Analog Devices Inc | 12,211 | |||
| HMC999 | Analog Devices Inc | Wide Band High Power Amplifier, 10MHz Min, 10000MHz Max, 1 Func, GAN RoHS : Compliant | 11,955 | |||
MAC997B8RL1G | onsemi | 4 Quadrant Logic Level TRIAC, 600V V(DRM), 0.8A I(T)RMS, TO-92 RoHS : Compliant | 11,732 | |||
| HMC994APM5E | Analog Devices Inc | Wide Band Medium Power Amplifier, 0MHz Min, 28000MHz Max RoHS : Compliant | 11,450 | |||
| HMC994LP5E | Analog Devices Inc | Wide Band Medium Power Amplifier, 0MHz Min, 28000MHz Max RoHS : Compliant | 10,140 | |||
| DC997B-C | Analog Devices Inc | 8,874 | ||||
| HMC998A | Analog Devices Inc | Wide Band Medium Power Amplifier, 0MHz Min, 22000MHz Max RoHS : Compliant | 8,495 | |||
| DC996B-I | Analog Devices Inc | 7,791 | ||||
| HMC998APM5ETR | Analog Devices Inc | RoHS : Compliant | 7,481 | |||
| EV1HMC998APM5 | Analog Devices Inc | RoHS : Compliant | 6,330 | |||
| HMC996LP4E | Analog Devices Inc | Wide Band Low Power Amplifier, 5000MHz Min, 12000MHz Max RoHS : Compliant | 5,799 | |||
| DC996B-A | Analog Devices Inc | 5,377 | ||||
| LC703200AW-8C99-H | onsemi | Consumer Circuit, CMOS, PQFP64 RoHS : Compliant | 4,432 | |||
| GC9902-17SP | Microchip Technology Inc | Mixer Diode, Low Barrier, X Band, Silicon RoHS : Compliant | 2,180 | |||
| HMC997LC4TR | Hittite Microwave | Wide Band Medium Power Amplifier | 819 | |||
 Win Source Electronics | CSTCE8M00G15C99-R0 | Murata Manufacturing Co Ltd | RoHS : Compliant |
| 3,000 | |
| HMC994APM5E | Analog Devices Inc | IC RF AMP 0HZ-28GHZ 32LFCSP-CAV RoHS : Compliant |
| 1,088 | ||
| HMC994APM5ETR | Analog Devices Inc | IC RF AMP 0HZ-28GHZ 32LFCSP-CAV / RF Amplifier IC 0Hz ~ 28GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 1,010 | ||
| HMC998APM5E | Analog Devices Inc | IC AMP GP 0HZ-22GHZ 32LFCSP-CAV / RF Amplifier IC General Purpose 0Hz ~ 22GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 950 | ||
| HMC998APM5ETR-R5 | Analog Devices Inc | IC RF AMP GPS 0HZ-22GHZ 32LFCSP RoHS : Compliant |
| 950 | ||
| HMC998APM5ETR | Analog Devices Inc | IC AMP GP 0HZ-22GHZ 32LFCSP-CAV / RF Amplifier IC General Purpose 0Hz ~ 22GHz 32-LFCSP-CAV (5x5) RoHS : Compliant |
| 930 | ||
| HMC998A | Analog Devices Inc | IC RF AMP VSAT 100MHZ-20GHZ DIE / RF Amplifier IC VSAT 100MHz ~ 20GHz Die RoHS : Compliant |
| 500 | ||
| HMC996LP4E | Analog Devices Inc | IC RF AMP GPS 5GHZ-12GHZ 24QFN / RF Amplifier IC General Purpose 5GHz ~ 12GHz 24-QFN (4x4) RoHS : Compliant |
| 333 | ||
| HMC996LP4ETR | Analog Devices Inc | IC RF AMP RADAR 5GHZ-12GHZ 24QFN / RF Amplifier IC Radar 5GHz ~ 12GHz 24-QFN (4x4) RoHS : Compliant |
| 310 | ||
| HMC994A | Analog Devices Inc | IC RF AMP VSAT 0HZ-30GHZ DIE RoHS : Compliant |
| 190 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British