| Electronic Components Datasheet Search |
|
CR001003JB Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | CST0612-FC-R0015E![]() | Bourns Inc | - Product that comes on tape, but is not reeled (Alt: 78Y9864) RoHS : Compliant |
| 0 | |
| TNA14DCR0-01B | ITT Interconnect Solutions | - Bulk (Alt: TNA14DCR0-01B) RoHS : Not Compliant |
| 0 | ||
| TNA22DCR0-01B | ITT Interconnect Solutions | Connector Accessories Dust Cap Plastic Shell Size 22 Bulk - Bulk (Alt: TNA22DCR0-01B) RoHS : Compliant |
| 0 | ||
| TNA20DCR0-01B | ITT Interconnect Solutions | - Bulk (Alt: TNA20DCR0-01B) RoHS : Not Compliant |
| 0 | ||
| TNA18DCR0-01B | ITT Interconnect Solutions | - Bulk (Alt: TNA18DCR0-01B) RoHS : Not Compliant |
| 0 | ||
| TNA10DCR0-01B | ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk - Bulk (Alt: TNA10DCR0-01B) RoHS : Not Compliant |
| 0 | ||
| TNA12DCR0-01B | ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk - Bulk (Alt: TNA12DCR0-01B) RoHS : Not Compliant |
| 0 | ||
| TNA16DCR0-01B | ITT Interconnect Solutions | - Bulk (Alt: TNA16DCR0-01B) RoHS : Not Compliant |
| 0 | ||
CST0612-FC-R0015E![]() | Bourns Inc | - Tape and Reel (Alt: CST0612-FC-R0015E) RoHS : Compliant |
| 0 | ||
CST0612-FC-R001E![]() | Bourns Inc | - Tape and Reel (Alt: CST0612-FC-R001E) RoHS : Compliant |
| 0 | ||
![]() Newark | CST0612-FC-R001E![]() | Bourns Inc | Fixed Resistors Surface Mount Current Se; |Bourns, Inc. CST0612-FC-R001E RoHS : Compliant |
| 4,000 | |
| LRMAP3920C-R001FT | TT Electronics Welwyn Components | Curr Sense Res Smd, 0R001, 5W; |Tt Electronics/welwyn LRMAP3920C-R001FT RoHS : Compliant |
| 1,726 | ||
| LRMAP3920C-R001FT | TT Electronics Welwyn Components | Curr Sense Res Smd, 0R001, 5W; |Tt Electronics/welwyn LRMAP3920C-R001FT RoHS : Compliant |
| 1,726 | ||
CST0612-FC-R0015E![]() | Bourns Inc | Curr Sense Res Smd, 0R0015, 1W; |Bourns, Inc. CST0612-FC-R0015E RoHS : Compliant |
| 521 | ||
CST0612-FC-R0015E![]() | Bourns Inc | Curr Sense Res Smd, 0R0015, 1W; |Bourns, Inc. CST0612-FC-R0015E RoHS : Compliant |
| 521 | ||
| TNA14DCR0-01B | ITT Interconnect Solutions | Dust Cap, Size 14; |Itt Cannon TNA14DCR0-01B RoHS : Compliant |
| 278 | ||
| TNA16DCR0-01B | ITT Interconnect Solutions | Dust Cap, Size 16; |Itt Cannon TNA16DCR0-01B RoHS : Compliant |
| 221 | ||
| TCR001 | Platinum Tools | No. 1 Coax Rf Remote, Analyzer; Accessory Type:No. 1 Coax Rf Remote; For Use With:Platinum Tools Coax Clarifier Network Analyzer; Product Range:Coax Clarifier Series |Platinum Tools TCR001 RoHS : Not Compliant |
| 18 | ||
| FM-W42CR001 | Fairview Microwave Inc | Wr-42 Waveguide Circulator 18 Db Min Iso; |Fairview Microwave FM-W42CR001 RoHS : Not Compliant |
| 3 | ||
| FM-W75CR001 | Fairview Microwave Inc | Wr-75 Waveguide Circulator With 20 Db Mi; |Fairview Microwave FM-W75CR001 RoHS : Not Compliant |
| 3 | ||
| FM-W22CR001 | Fairview Microwave Inc | Wr-22 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W22CR001 RoHS : Not Compliant |
| 1 | ||
| FM-W51CR001 | Fairview Microwave Inc | Wr-51 Waveguide Circulator With 18 Db Mi; |Fairview Microwave FM-W51CR001 RoHS : Not Compliant |
| 1 | ||
| FM-W10CR001 | Fairview Microwave Inc | Wr-10 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W10CR001 RoHS : Not Compliant |
| 1 | ||
| FM-W15CR001 | Fairview Microwave Inc | Wr-15 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W15CR001 RoHS : Not Compliant |
| 1 | ||
| FM-W34CR001 | Fairview Microwave Inc | Wr-34 Waveguide Circulator With 18 Db Mi; |Fairview Microwave FM-W34CR001 RoHS : Not Compliant |
| 1 | ||
![]() RS | LSCR001 | Littelfuse Inc | FUSE BLOCK, LSCR SERIES, CHASIS MOUNT, 1/4" SUD MOUNT, 600A, 400A, STEEL RoHS : Compliant |
| 36 | |
| TGHGCR0010FE | Ohmite Mfg Co | RESISTOR, THICK FILM, RES 0.001 OHMS, 100 W, TOL 1%, SMT, SOT-227, CURR-SENSE RoHS : Compliant |
| 25 | ||
| SS5V3-ICR001 | SMC Corporation of America | SS5V3 MANIFOLD SV3000, SV SERIES |
| 0 | ||
| 6FX50122CR001EF0 | Siemens | SIGNAL CABLE. PREASSEMBLED ; 242.44 |
| 0 | ||
| 6FX80022CR001BA0 | Siemens | SIGNAL CABLE, INC ENC-S120,MC800,10M ; 116.00 |
| 0 | ||
| 6FX80022CR001AC0 | Siemens | CABLE, SIGNAL, PREFAB, TRAILING, MC800+,02M ; 79.46 |
| 0 | ||
CST0612-FC-R001E![]() | Bourns Inc | RESISTORS, CURRENT SENSE, .001OHMS 1W 1% 0612 4TERM RES RoHS : Compliant |
| 0 | ||
| 6FX80022CR001BB0 | Siemens | SIGNAL CABLE PREASSAMBLED ; 120.64 |
| 0 | ||
| 6FX80022CR001CE0 | Siemens | SIGNAL CABLE PREASSAMBLED ; 179.22 |
| 0 | ||
| 6FX80022CR001BE0 | Siemens | SIGNAL CABLE PREASSAMBLED |
| 0 | ||
| 6FX50022CR001AH0 | Siemens | SIGNAL CABLE, PREFAB, MC500,7M ; 93.96 |
| 0 | ||
| 6FX80022CR001AE0 | Siemens | CABLE, SIGNAL, PREFAB, TRAILING, MC800+, 4M ; 88.74 |
| 0 | ||
| 192900-0380 (TNA18DCR001B) | ITT Interconnect Solutions | IP65 7 & 23 WAY QM MULTIPOLE DUST CAP |
| 0 | ||
| RSCB200-VB-B-0-V (RCR-00102979 | RSCB200-VB-B-0-V | RSCB200VBB0V) | Carling Technologies | ROCKER SWITCH;SINGLE POLE;ROCKER AND PADDLE ACTUATOR;R/RSC SERIES |
| 0 | ||
| RSCA201-VB-B-B-V (RCR-00109896 | RSCA201-VB-B-B-V | RSCA201VBBBV) | Carling Technologies | ROCKER SWITCH;SINGLE POLE;ROCKER AND PADDLE ACTUATOR;R/RSC SERIES |
| 0 | ||
![]() STMicroelectronics | STEVAL-SCR001V1 | STMicroelectronics | Inrush current solution with bypass SCR |
| 0 | |
![]() Sager | LSCR001 | Littelfuse Inc | ACS 700V SEMICONDUCTOR BLOCK 400A RoHS : Compliant |
| 34 | |
| WPB1440S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB132S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB7600S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB1320S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB4701S5CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB4501S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB8961S5CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB4701S3CR-001 | TE Connectivity | TE Connectivity | 0 | |||
| WPB8060S5CR-001 | TE Connectivity | TE Connectivity | 0 | |||
![]() TME | CR0012 | Logilink | Card reader: memory; internal supplied; black |
| 3 | |
| DN-CR-001 | Digitus | Rack for unwinding cables from drums; 600x400x100mm |
| 1 | ||
| LSCR001 | Littelfuse Inc | Fuse base; 400A; 700VAC; 1.5kVDC; on panel; UL94V-0 RoHS : Compliant |
| 1 | ||
| LRMAP5930C-R001FT | TT Electronics plc | Resistor: thick film; 1mΩ; SMD; 1W; -55÷170°C; 50ppm/°C |
| 0 | ||
![]() Interstate Connecting Components | TNA16DCR0-01B | ITT Interconnect Solutions | DUST CAP RECEPTACLE SZ: 16 RoHS : Compliant | 0 | ||
| TNA22DCR0-01B | ITT Interconnect Solutions | TNA22DCR0-01B RoHS : Compliant | 0 | |||
| TNA20DCR0-01B | ITT Interconnect Solutions | TNA20DCR0-01B | 0 | |||
![]() NexGen Digital | CST0612-FC-R001E![]() | Bourns Inc | RoHS : Compliant | 6,335 | ||
![]() Richardson RFPD | TGHGCR0010FE | Ohmite Mfg Co | Res Thick Film 0.001 Ohm 1% 100W ±500ppm/C SOT-227 RoHS : Compliant |
| 0 | |
| TGHGCR0010DE | Ohmite Mfg Co | TGHGCR0010DE RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | LRMAP3920C-R001FT | INSTOCK | 76,373 | |||
| LRMAP5930C-R001FT | INSTOCK | 50,077 | ||||
| RLM25FECR001 | TA-I Technology Co Ltd | INSTOCK RoHS : Compliant | 593 | |||
| RLM25FECR001 | INSTOCK | 25 | ||||
![]() Avnet Abacus | TNA16DCR001B | ITT Interconnect Solutions | Connector Accessories Dust Cap Bulk (Alt: 192900-0379) RoHS : Compliant | 0 | ||
| TNA18DCR001B | ITT Interconnect Solutions | (Alt: TNA18DCR001B) RoHS : Compliant | 0 | |||
| TNA14DCR0-01B | ITT Interconnect Solutions | (Alt: 192900-0378) RoHS : Compliant | 0 | |||
| TNA12DCR0-01B | ITT Interconnect Solutions | (Alt: 192900-0377) RoHS : Compliant | 0 | |||
| TNA24DCR0-01B | ITT Interconnect Solutions | (Alt: 192900-0383) RoHS : Compliant | 0 | |||
| TNA22DCR0-01B | ITT Interconnect Solutions | Connector Accessories Dust Cap Plastic Shell Size 22 Bulk (Alt: 192900-0382) RoHS : Compliant | 0 | |||
| TNA18DCR0-01B | ITT Interconnect Solutions | (Alt: 192900-0380) RoHS : Compliant | 0 | |||
| TNA10DCR0-01B | ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk (Alt: 192900-0376) RoHS : Compliant | 0 | |||
CST0612-FC-R001E![]() | Bourns Inc | SMD Current Sense Resistor 0001 ohm CST0612 Series 0612 1632 Metric 1 W 1 - Tape and Reel (Alt: CST0612-FC-R001E) RoHS : Compliant | 0 | |||
CST0612-FC-R0015E![]() | Bourns Inc | SMD Current Sense Resistor 00015 ohm CST0612 Series 0612 1632 Metric 1 W 1 - Tape and Reel (Alt: CST0612-FC-R0015E) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WE310F5P20CR001000 | Telit | WE310F5-P (Wi-Fi b/g/n + BLE) 39.02.012 |
| 0 | |
| WE310F5I20CR001000 | Telit | WE310F5-I (Wi-Fi b/g/n + BLE) 39.02.012 |
| 0 | ||
![]() Master Electronics | TNA12DCR0-01B | ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk RoHS : Compliant |
| 463 | |
| TNA16DCR0-01B | ITT Interconnect Solutions | The TNA16DCR0-01B is a sealed dust cap receptacle accessory with a shell size of 16 for the Cannon Trident connector series. RoHS : Compliant |
| 360 | ||
| TGHGCR0010FE | Ohmite Mfg Co | Resistor - Current Sense - 100W SOT-277 - 0.001 Ohm 1% - 4 Screw Terminals - Bolt-On RoHS : Compliant |
| 197 | ||
| RCR-00115068 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00118074 | Carling Technologies | R-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00115818 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00108815 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00108594 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| TNA14DCR0-01B | ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk RoHS : Compliant |
| 0 | ||
| LRMAP3920C-R001FT | TT Electronics Resistors | RoHS : Compliant |
| 0 | ||
| RCR-00116555 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00109440 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00114165 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00109441 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCR-00115709 | Carling Technologies | RSC-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
![]() Neutron USA | TGHGCR0010FE | Ohmite Mfg Co | Current Sense Resistors - Through Hole .001ohm 100watt 1% High Power RoHS : Compliant |
| 50 | |
| TGHGCR0010DE | Ohmite Mfg Co | Current Sense Resistors - Through Hole 100W .0010 ohm 0.5% Four Terminals RoHS : Compliant |
| 50 | ||
| LSCR001 | Littelfuse Inc | Fuse Block, LSCR Series, Chasis Mount, 1/4" Sud Mount, 600A, 400A, Steel RoHS : Compliant |
| 50 | ||
![]() Pasternack Enterprises US | PE-W51CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 14.5 GHz Maximum Frequency: 22 GHz Waveguide size: WR-51 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 50 Watts Input Power (Peak): 1 KWatts. WR-51 Waveguide Circulator, 14.5 GHz to 22 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W51CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 14.5 to 22 GHz. The design achieves high isolation with wide band performance and the WR-51 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 50 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 3 | |
| PE-W62CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 11.9 GHz Maximum Frequency: 18 GHz Waveguide size: WR-62 VSWR(Max): 1.25:1 Insertion Loss: 0.3 dB Isolation (min) : 20 dB Forward Power (CW)(Max): 50 Watts Input Power (Peak): 2 KWatts. WR-62 Waveguide Circulator, 11.9 GHz to 18 GHz, 20 dB min Isolation, Cover Flange, Aluminum. The PE-W62CR001 is a Waveguide Circulator offering 20 dB minimum isolation over the Ku band frequency range of 11.9 to 18 GHz. The design achieves high isolation with wide band performance and the WR-62 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 50 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 3 | ||
| PE-W10CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 82.2 GHz Maximum Frequency: 84.2 GHz Waveguide size: WR-10 VSWR(Max): 1.5:1 Insertion Loss: 1 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 0.5 Watts Input Power (Peak): 20 Watts. WR-10 Waveguide Circulator, 82.2 GHz to 84.2 GHz, 15 dB min Isolation, UG-387/U-M Cover Flange, Brass. The PE-W10CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the W band frequency range of 82.2 to 84.2 GHz. The design achieves high isolation with wide band performance and the WR-10 waveguide uses UG-387/U-M compatible flanges on all ports and has a power rating of 0.5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 2 | ||
| PE-W12CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 64.5 GHz Maximum Frequency: 66.5 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Input Power (Peak): 20 Watts. WR-12 Waveguide Circulator, 64.5 GHz to 66.5 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the E band frequency range of 64.5 to 66.5 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 2 | ||
| PE-W137CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 5.38 GHz Maximum Frequency: 8.17 GHz Waveguide size: WR-137 VSWR(Max): 1.35:1 Insertion Loss: 0.4 dB Isolation (min) : 17 dB Forward Power (CW)(Max): 150 Watts Input Power (Peak): 10 KWatts. WR-137 Waveguide Circulator, 5.38 GHz to 8.17 GHz, 17 dB min Isolation, CPR137F Flange, Aluminum. The PE-W137CR001 is a Waveguide Circulator offering 17 dB minimum isolation over the C band frequency range of 5.38 to 8.17 GHz. The design achieves high isolation with wide band performance and the WR-137 waveguide uses CPR137F compatible flanges on all ports and has a power rating of 150 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 2 | ||
| PE-W15CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 61 GHz Maximum Frequency: 65 GHz Waveguide size: WR-15 VSWR(Max): 1.4:1 Insertion Loss: 0.6 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 5 Watts Input Power (Peak): 30 Watts. WR-15 Waveguide Circulator, 61 GHz to 65 GHz, 15 dB min Isolation, UG-385/U Cover Flange, Brass. The PE-W15CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the V band frequency range of 61 to 65 GHz. The design achieves high isolation with wide band performance and the WR-15 waveguide uses UG-385/U compatible flanges on all ports and has a power rating of 5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 2 | ||
| PE83CR001 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 700 MHz, Maximum Frequency: 800 MHz, Impedance: 50 Ohm, Maximum Input Power: 10 Watts, Minimum Isolation: 18 dB. Circulator with 18 dB Isolation from 700 MHz to 800 MHz, 10 Watts and SMA Female. RF circulator PE83CR001 from Pasternack is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF circulator is manufactured with SMA connectors that are female. Our SMA circulator has a minimum frequency of 700 MHz and a maximum frequency of 800 MHz. This SMA coaxial circulator has a minimum isolation of 18 dB and a maximum input power of 10 Watts. PE83CR001 coaxial SMA circulator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency circulator can be bought and shipped worldwide the same-day as with our other in-stock RF parts. |
| 2 | ||
| PE-W22CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 32.9 GHz Maximum Frequency: 40 GHz Waveguide size: WR-22 VSWR(Max): 1.4:1 Insertion Loss: 0.4 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 5 Watts Input Power (Peak): 50 Watts. WR-22 Waveguide Circulator, 32.9 GHz to 40 GHz, 15 dB min Isolation, UG-383/U Cover Flange, Brass. The PE-W22CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the Q band frequency range of 32.9 to 40 GHz. The design achieves high isolation with wide band performance and the WR-22 waveguide uses UG-383/U compatible flanges on all ports and has a power rating of 5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 1 | ||
| PE-W42CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 17.6 GHz Maximum Frequency: 26.7 GHz Waveguide size: WR-42 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 30 Watts Input Power (Peak): 500 Watts. WR-42 Waveguide Circulator, 17.6 GHz to 26.7 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W42CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 17.6 to 26.7 GHz. The design achieves high isolation with wide band performance and the WR-42 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 30 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 1 | ||
| PE-W75CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 9.84 GHz Maximum Frequency: 15 GHz Waveguide size: WR-75 VSWR(Max): 1.25:1 Insertion Loss: 0.3 dB Isolation (min) : 20 dB Forward Power (CW)(Max): 100 Watts Input Power (Peak): 3 KWatts. WR-75 Waveguide Circulator, 9.84 GHz to 15 GHz, 20 dB min Isolation, Cover Flange, Aluminum. The PE-W75CR001 is a Waveguide Circulator offering 20 dB minimum isolation over the X band frequency range of 9.84 to 15 GHz. The design achieves high isolation with wide band performance and the WR-75 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 100 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 1 | ||
| PE-W28CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 26.5 GHz Maximum Frequency: 40 GHz Waveguide size: WR-28 VSWR(Max): 1.4:1 Insertion Loss: 0.4 dB Isolation (min) : 16 dB Forward Power (CW)(Max): 15 Watts Input Power (Peak): 300 Watts. WR-28 Waveguide Circulator, 26.5 GHz to 40 GHz, 16 dB min Isolation, Cover Flange, Brass. The PE-W28CR001 is a Waveguide Circulator offering 16 dB minimum isolation over the Ka band frequency range of 26.5 to 40 GHz. The design achieves high isolation with wide band performance and the WR-28 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 15 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 0 | ||
| PE-W34CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 21.7 GHz Maximum Frequency: 33 GHz Waveguide size: WR-34 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 20 Watts Input Power (Peak): 300 Watts. WR-34 Waveguide Circulator, 21.7 GHz to 33 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W34CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the Ka band frequency range of 21.7 to 33 GHz. The design achieves high isolation with wide band performance and the WR-34 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 20 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 0 | ||
| PE-W90CR001 | Pasternack Enterprises | Key Specifications. Minimum Frequency: 8.2 GHz Maximum Frequency: 12.4 GHz Waveguide size: WR-90 VSWR(Max): 1.35:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 100 Watts Input Power (Peak): 3 KWatts. WR-90 Waveguide Circulator, 8.2 GHz to 12.4 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W90CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the X band frequency range of 8.2 to 12.4 GHz. The design achieves high isolation with wide band performance and the WR-90 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 100 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. |
| 0 | ||
![]() Vyrian | VT1314SFCR-001 | Analog Devices (Maxim Integrated) | 9,591 | |||
| VT1115SFCR-001 | Analog Devices (Maxim Integrated) | 8,208 | ||||
| VT1317SFCR-001 | Analog Devices (Maxim Integrated) | 7,488 | ||||
| STEVAL-SCR001V1 | STMicroelectronics | 2,512 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |